1997 Nov 12 1
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
FEATURES
•Polarized aluminium electrolytic
capacitors, non-solid
•Radial leads, cylindrical aluminium
case with pressure relief, insulated
with a blue vinyl sleeve
•Charge and discharge proof
•Very long useful life,
3000/4000 hours at 105 °C, high
reliability
•High ripple current capability, low
impedance, low ESR.
APPLICATIONS
•Power conversion, EDP,
telecommunication, industrial and
audio-video
•Smoothing, filtering, buffering in
SMPS, timing.
Fig.1 Component outlines.
handbook, 4 columns
MAM079
handbook, halfpage
RSL 046
105 oC
RHT 165
125 oC
MGC674
RLL 116 RVI 136
longer life
low Z
higher
temperature
lower
CV-values
higher
CV/volume
RML 048
QUICK REFERENCE DATA
DESCRIPTION VALUE
Case sizes (∅Dnom ×Lnom in mm) 10 ×12 to 18 ×40
Rated capacitance range, CR22 to 10000 µF
Tolerance on CR±20%
Rated voltage range, UR6.3 to 63 V
Category temperature range −40 to +105 °C
Endurance test at 105 °C 2000 hours
Useful life at 105 °C:
case ∅D = 10 and 12.5 mm 3000 hours
case ∅D = 16 and 18 mm 4000 hours
Useful life at 40 °C, 1.6 ×IR applied:
case ∅D = 10 and 12.5 mm 200000 hours
case ∅D = 16 and 18 mm 260000 hours
Shelf life at 0 V, 105 °C 1000 hours
Based on sectional specification IEC 384-4/CECC 30300
Climatic category IEC 68 40/105/56
1997 Nov 12 2
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
Selection chart for CR, UR and relevant nominal case sizes (∅D×L in mm)
Preferred types in bold.
Note
1. For lower CV-values see
“data sheet RLL 116”
.
CR
(µF) UR (V)
6.3 10 16 25 35 40 50 63
22(1) − −−−−−−10 ×12
47 − −−−−−−10 ×12
100 −−−−−10 ×12 10 ×16 10 ×20
220 −−10 ×12 −10 ×16 10 ×20 12.5 ×20 12.5 ×25
330 −10 ×12 10 ×16 −10 ×20 12.5 ×20 12.5 ×25 16 ×25
470 10 ×12 10 ×16 10 ×20 −12.5 ×20 12.5 ×25 −16 ×25
1000 10 ×20 12.5 ×20 12.5 ×25 12.5 ×25 16 ×25 −16 ×31 18 ×35
2200 12.5 ×25 −16 ×25 16 ×31 16 ×35 18 ×35 18 ×40 −
3300 16 ×25 −16 ×31 18 ×35 −18 ×40 −−
4700 16 ×31 16 ×35 18 ×35 18 ×40 −−−−
6800 16 ×35 18 ×35 18 ×40 −−−−−
10000 18 ×35 18 ×40 −−−−−−
1997 Nov 12 3
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
MECHANICAL DATA, AVAILABLE FORMS AND PACKAGING QUANTITIES
Fig.2 Form CA: Long leads.
Dimensions in mm.
For dimensions see Table 1.
handbook, halfpage
L
F15
min
5
min
MRA220
Od
OD
Fig.3 Form CB: Cut leads.
Dimensions in mm.
For dimensions see Table 1.
handbook, halfpage
MBC417
O D
L
41
0
F
Od
Table 1 Physical dimensions, mass and packaging quantities; see Figs 2 and 3
NOMINAL
CASE SIZE
∅D×L
(mm)
CASE
CODE ∅d
(mm) ∅Dmax
(mm) Lmax
(mm) F
(mm) MASS
(g)
PACKAGING QUANTITIES
FORM
CA FORM
CB FORM
TFA
10 ×12 14 0.6 10.5 13.5 5.0 ±0.5 ≈1.6 1000 500 800
10 ×16 15 0.6 10.5 17.5 5.0 ±0.5 ≈1.9 500 500 800
10 ×20 16 0.6 10.5 22.0 5.0 ±0.5 ≈2.2 500 500 800
12.5 ×20 17 0.6 13.0 22.0 5.0 ±0.5 ≈4.0 500 500 500
12.5 ×25 18 0.6 13.0 27.0 5.0 ±0.5 ≈5.0 250 250 500
16 ×25 19 0.8 16.5 27.0 7.5 ±0.5 ≈8.0 250 250 250
16 ×31 20 0.8 16.5 33.5 7.5 ±0.5 ≈9.0 100 100 250
16 ×35 21 0.8 16.5 37.5 7.5 ±0.5 ≈11.5 100 100 −
18 ×35 22 0.8 18.5 37.5 7.5 ±0.5 ≈14.5 300 1000 −
18 ×40 23 0.8 18.5 42.0 7.5 ±0.5 ≈16.0 300 1000 −
1997 Nov 12 4
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
Taped products
MARKING
The capacitors are marked with the following information:
•Rated capacitance (in µF)
•Tolerance on rated capacitance, code letter in accordance with
“IEC62”
(M for ±20%)
•Rated voltage (in V)
•Upper category temperature (105 °C)
•Group number (046)
•Code indicating factory of origin
•Name of manufacturer, PHILIPS
•Date code, in accordance with
“IEC 62”
•Negative terminal identification.
Fig.4 Taped in box (ammopack).
Form TFA.
Case ∅D×L≤16 ×31 mm.
Tape dimensions are specified in this handbook, section
“Packaging”
.
handbook, full pagewidth
MAM066
1997 Nov 12 5
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
ELECTRICAL DATA AND ORDERING INFORMATION
Unless otherwise specified, all electrical values in Table 2 apply at Tamb =20°C,
P = 86 to 106 kPa, RH = 45 to 75%.
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz, tolerance ±20%
IRrated RMS ripple current at 100 Hz, 105 °C
IRH rated RMS ripple current at 100 kHz, 105 °C
IL1 max. leakage current after 1 minute at UR
IL5 max. leakage current after 5 minutes at UR
Tan δmax. dissipation factor at 100 Hz
ESR equivalent series resistance at 100 Hz (calculated from tan δmax and CR)
Z max. impedance at 10 kHz or 100 kHz.
Ordering example
Electrolytic capacitor RSL 046
2200 µF/16 V; ±20%
Nominal case size: ∅16 × 25 mm; Form TFA
Catalogue number: 2222 046 35222.
Table 2 Electrical data and ordering information; preferred types in bold
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE
SIZE
∅D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(mA)
IRH
100 kHz
105 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
(Ω)
Z
100 kHz
(Ω)
CATALOGUE NUMBER
2222 ... .....
BULK PACKAGING TAPED
FORM CA FORM CB FORM TFA
6.3 470 10 ×12 14 360 600 33 9 0.19 0.64 0.32 0.28 046 53471 046 63471 046 33471
1000 10 ×20 16 600 1000 66 16 0.19 0.30 0.15 0.14 046 53102 046 63102 046 33102
2200 12.5 ×25 18 950 1500 140 31 0.23 0.17 0.08 0.07 046 53222 046 63222 046 33222
3300 16 ×25 19 1200 1700 210 45 0.25 0.12 0.06 0.06 046 53332 046 63332 046 33332
4700 16 ×31 20 1400 2000 300 62 0.27 0.09 0.05 0.05 046 53472 046 63472 046 33472
6800 16 ×35 21 1600 2100 430 89 0.31 0.07 0.05 0.05 046 53682 046 63682 −
10000 18 ×35 22 1800 2300 630 130 0.39 0.06 0.04 0.04 046 53103 046 63103 −
10 330 10 ×12 14 370 620 36 10 0.15 0.72 0.38 0.31 046 54331 046 64331 046 34331
470 10 ×16 15 460 800 50 12 0.15 0.51 0.27 0.22 046 54471 046 64471 046 34471
1000 12.5 ×20 17 770 1100 100 23 0.15 0.24 0.13 0.12 046 54102 046 64102 046 34102
4700 16 ×35 21 1600 2300 470 97 0.23 0.08 0.04 0.04 046 54472 046 64472 −
6800 18 ×35 22 1800 2500 680 140 0.27 0.06 0.03 0.03 046 54682 046 64682 −
10000 18 ×40 23 2000 2600 1000 200 0.35 0.06 0.03 0.03 046 54103 046 64103 −
1997 Nov 12 6
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
16 220 10 ×12 14 350 620 38 10 0.13 0.94 0.40 0.31 046 55221 046 65221 046 35221
330 10 ×16 15 430 800 56 14 0.13 0.63 0.30 0.22 046 55331 046 65331 046 35331
470 10 ×20 16 560 920 78 18 0.13 0.44 0.21 0.18 046 55471 046 65471 046 35471
1000 12.5 ×25 18 900 1500 160 35 0.13 0.21 0.10 0.10 046 55102 046 65102 046 35102
2200 16 ×25 19 1300 1800 360 73 0.17 0.12 0.06 0.05 046 55222 046 65222 046 35222
3300 16 ×31 20 1600 2200 530 110 0.19 0.09 0.04 0.04 046 55332 046 65332 046 35332
4700 18 ×35 22 1800 2500 760 150 0.21 0.07 0.03 0.03 046 55472 046 65472 −
6800 18 ×40 23 2000 2600 1100 220 0.25 0.06 0.03 0.03 046 55682 046 65682 −
25 1000 12.5 ×25 18 900 1500 250 53 0.11 0.18 0.09 0.08 046 56102 046 66102 046 36102
2200 16 ×31 20 1600 2100 550 110 0.15 0.11 0.04 0.04 046 56222 046 66222 046 36222
3300 18 ×35 22 1900 2500 830 170 0.17 0.08 0.03 0.03 046 56332 046 66332 −
4700 18 ×40 23 2000 2600 1200 240 0.19 0.06 0.03 0.03 046 56472 046 66472 −
35 220 10 ×16 15 400 740 80 18 0.10 0.72 0.30 0.23 046 50221 046 60221 046 30221
330 10 ×20 16 510 880 120 26 0.10 0.48 0.26 0.16 046 50331 046 60331 046 30331
470 12.5 ×20 17 650 1000 170 36 0.10 0.34 0.14 0.11 046 50471 046 60471 046 30471
1000 16 ×25 19 1200 1600 350 73 0.10 0.16 0.07 0.06 046 50102 046 60102 046 30102
2200 16 ×35 21 1800 2000 770 160 0.12 0.10 0.04 0.04 046 50222 046 60222 −
40 100 10 ×12 14 300 560 43 11 0.09 1.43 0.60 0.35 046 57101 046 67101 046 37101
220 10 ×20 16 450 850 91 21 0.09 0.65 0.27 0.17 046 57221 046 67221 046 37221
330 12.5 ×20 17 590 1000 140 29 0.09 0.43 0.18 0.13 046 57331 046 67331 046 37331
470 12.5 ×25 18 750 1300 190 41 0.09 0.30 0.13 0.08 046 57471 046 67471 046 37471
2200 18 ×35 22 1900 2500 880 180 0.11 0.08 0.03 0.03 046 57222 046 67222 −
3300 18 ×40 23 2100 2600 1300 270 0.12 0.06 0.03 0.03 046 57332 046 67332 −
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE
SIZE
∅D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(mA)
IRH
100 kHz
105 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
(Ω)
Z
100 kHz
(Ω)
CATALOGUE NUMBER
2222 ... .....
BULK PACKAGING TAPED
FORM CA FORM CB FORM TFA
1997 Nov 12 7
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
Additional electrical data
50 100 10 ×16 15 310 610 53 13 0.07 1.11 0.50 0.28 046 51101 046 61101 046 31101
220 12.5 ×20 17 500 980 110 25 0.07 0.51 0.23 0.13 046 51221 046 61221 046 31221
330 12.5 ×25 18 680 1200 170 36 0.07 0.34 0.15 0.09 046 51331 046 61331 046 31331
1000 16 ×31 20 1400 1800 500 100 0.07 0.11 0.05 0.05 046 51102 046 61102 046 31102
2200 18 ×40 23 2000 2600 1100 220 0.09 0.07 0.03 0.03 046 51222 046 61222 −
63 22 10 ×12 14 170 310 17 9 0.06 4.3 1.6 0.7 046 58229 046 68229 046 38229
47 10 ×12 14 230 430 33 9 0.06 2.03 0.96 0.40 046 58479 046 68479 046 38479
100 10 ×20 16 360 710 66 16 0.06 0.95 0.45 0.20 046 58101 046 68101 046 38101
220 12.5 ×25 18 610 1100 140 31 0.06 0.43 0.20 0.11 046 58221 046 68221 046 38221
330 16 ×25 19 750 1300 210 45 0.06 0.29 0.14 0.08 046 58331 046 68331 046 38331
470 16 ×25 19 950 1600 300 62 0.06 0.20 0.10 0.06 046 58471 046 68471 046 38471
1000 18 ×35 22 1500 2100 630 130 0.06 0.10 0.04 0.04 046 58102 046 68102 −
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage for short periods Us≤1.15 UR
Reverse voltage Urev ≤1V
Current
Leakage current after 1 minute at URIL1 ≤0.01CR×UR+3µA
after 5 minutes at URIL5 ≤0.002CR×UR+3µA
Inductance
Equivalent series inductance (ESL) case ∅D = 10 mm typ. 16 nH
case ∅D≥12.5 mm typ. 18 nH
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE
SIZE
∅D×L
(mm)
CASE
CODE
IR
100 Hz
105 °C
(mA)
IRH
100 kHz
105 °C
(mA)
IL1
1 min
(µA)
IL5
5 min
(µA)
Tan δ
100 Hz
ESR
100 Hz
(Ω)
Z
10 kHz
(Ω)
Z
100 kHz
(Ω)
CATALOGUE NUMBER
2222 ... .....
BULK PACKAGING TAPED
FORM CA FORM CB FORM TFA
1997 Nov 12 8
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
Capacitance (C)
Fig.5 Typical multiplier of capacitance as a function of ambient temperature.
Curve 1: 6.3 V.
Curve 2: 63 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
60 0 20
MBB977
40 20 40 60 80 T ( C)
amb o
0.6
0.7
0.8
0.9
1.0
1.1
100 120
1.2
C
0
C
2
1
2
1
Fig.6 Typical multiplier of capacitance as a function of frequency.
Curve 1: 6.3 V.
Curve 2: 63 V.
C0= capacitance at 20 °C, 100 Hz.
handbook, 4 columns
0105
MBB978
104
103
102
10 f (Hz)
0.2
0.4
0.6
0.8
1.0
1.2
C
0
C
2
1
1997 Nov 12 9
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
Equivalent series resistance (ESR)
Fig.7 Typical multiplier of ESR as a function of ambient temperature.
Curve 1: 6.3 V;
case ∅D = 10 and 12.5 mm.
Curve 2: 6.3 V;
case ∅D = 16 and 18 mm.
Curve 3: 63 V.
ESR0= typical at 20 °C, 100 Hz.
handbook, 4 columns
60 0
10
1
MBB979
2040 20 40 60 80 100 120
T ( C)
amb o
ESR
0
ESR
10 1
1, 2
3
2
1
3
Fig.8 Typical multiplier of ESR as a function of frequency.
Curve 1: 6.3 V.
Curve 2: 63 V.
ESR0= typical at 20 °C, 100 Hz.
handbook, 4 columns
0105
MBB980
104
103
102
10 f (Hz)
0.4
0.8
1.2
1.6
2.0
ESR
0
ESR 2
1
2
1
1997 Nov 12 10
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
Impedance (Z)
Fig.9 Typical multiplier of Impedance as a function of ambient temperature.
Curve 1: 6.3 V;
case ∅D = 10 and 12.5 mm.
Curve 2: 6.3 V;
case ∅D = 16 and 18 mm.
Curve 3: 63 V.
Z0= typical impedance at 20 °C, 10 kHz.
handbook, 4 columns
60 0
10
1
MBB981
2040 20 40 60 80 100 120
T ( C)
amb o
Z
0
Z
10 1
2
3
1
2
1
3
Fig.10 Typical impedance as a function of frequency.
Curve 1: 47 µF, 63 V; 10 ×12 mm.
Curve 2: 100 µF, 40 V; 10 ×12 mm.
Curve 3: 220 µF, 16 V; 10 ×12 mm.
Curve 4: 220 µF, 40 V; 10 ×20 mm.
Curve 5: 470 µF, 16 V; 10 ×20 mm.
Curve 6: 1000 µF, 6.3 V; 10 ×20 mm.
Case ∅D = 10 mm.
Tamb =20°C.
handbook, 4 columns
MBB748
65 1010
102
10
1
f (Hz)
Z
(Ω)
2
10 3
10 4
10
10 1
10 2
2
1
5
6
3
4
1997 Nov 12 11
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
Fig.11 Typical impedance at as a function of frequency.
Curve 1: 220 µF, 50 V; 12.5 ×20 mm.
Curve 2: 330 µF, 50 V; 12.5 ×25 mm.
Curve 3: 470 µF, 40 V; 12.5 ×25 mm.
Curve 4: 1000 µF, 35 V; 16 ×25 mm.
Curve 5: 1000 µF, 50 V; 16 ×31 mm.
Curve 6: 1000 µF, 63 V; 18 ×35 mm.
Curve 7: 4700 µF, 16 V; 18 ×35 mm.
Case ∅D = 12.5 to 18 mm.
Tamb =20°C.
handbook, 4 columns
MBB749
102
10
1
f (Hz)
Z
(Ω)
65 1010
2
10 3
10 4
10
10 1
10 2
2
1
5, 6
7
3
4
1997 Nov 12 12
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
RIPPLE CURRENT AND USEFUL LIFE
IA= actual ripple current at 100 Hz or 100 kHz.
IR= rated ripple current at 100 Hz or 100 kHz, 105 °C.
(1) Useful life at 105 °C and IR applied:
Case ∅D = 10 and 12.5 mm; 3000 hours
Case ∅D = 16 and 18 mm; 4000 hours.
Fig.12 Multiplier of useful life as a function of ambient temperature and ripple current load.
handbook, full pagewidth
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
3.1
40 50 60 70 80 90 100 110
MEA240
lifetime multiplier
Tamb (C)
o
I
A
R
I
1)
200
100
60
30
150
20
6.0
4.0
2.0
1.5
12
8.0
3.0
1.0
1997 Nov 12 13
Philips Components Maintenance type
Non-solid Al - electrolytic capacitors
Radial Standard Long-Life RSL 046
SPECIFIC TESTS AND REQUIREMENTS
General tests and requirements are specified in this handbook, section
“Tests and Requirements”
.
Table 3 Test procedures and requirements
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 384-4/
CECC 30300
subclause 4.13
Tamb = 105 °C; UR applied;
2000 hours UR= 6.3 V; ∆C/C: +15/−30%
UR>6.3 V; ∆C/C: ±15%
tan δ≤1.3 ×spec. limit
Z≤2×spec. limit
IL5 ≤spec. limit
Useful life CECC 30301
subclause 1.8.1 Tamb = 105 °C; UR and IR applied;
3000 hours, case ∅D = 10 and 12.5 mm
4000 hours, case ∅D = 16 and 18 mm
UR= 6.3 V; ∆C/C: +45/−50%
UR>6.3 V; ∆C/C: ±45%
tan δ≤3 x spec. limit
Z≤3×spec. limit
IL5 ≤spec. limit
no short or open circuit
total failure percentage: ≤1%
Shelf life
(storage at high
temperature)
IEC 384-4/
CECC 30300
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 hours;
after test: UR to be applied for 30 minutes,
24 to 48 hours before measurement
UR= 6.3 V; ∆C/C: +15/−30%
UR>6.3 V; ∆C/C: ±15%
tan δ≤1.3 ×spec. limit
Z≤2×spec. limit
IL5 ≤2×spec. limit
