FPS 60, FPS 80, FPS 110 Vishay Draloric RF Power Plate Capacitors with Flat Rim, Class 1 Ceramic FEATURES * Low losses * High reliability * Small dimensions APPLICATIONS * Industrial high frequency appliances * Medical RF equipment * Filter, bypass, and coupling circuits CAPACITANCE RANGE 100 pF to 1.0 nF CAPACITANCE TOLERANCE QUICK REFERENCE DATA 10 % DESCRIPTION VALUE Ceramic Class 1 Ceramic Dielectric CERAMIC DIELECTRICS * R42 (TCC - 250 ppm/K) R42, R85 * R85 (TCC - 750 ppm/K) Type FPS 60 FPS 80 FPS 110 Voltage (VDC) 10 000, 12 000 3500, 7000 12 000 Min. Capacitance (pF) 100 500 1000 * 3.5 kVpp (peak-to-peak voltage) Max. Capacitance (pF) 500 1000 1000 * 7.0 kVpp (peak-to-peak voltage) Mounting Screw terminal RATED VOLTAGE * 10 kVp * 12 kVp MATERIAL * 12 kVpp (peak-to-peak voltage) Capacitor elements made from Class 1 ceramic dielectric with noble metal electrodes. DIELECTRIC STRENGTH TEST Connection terminals made from copper/brass, silver plated 200 % of rated voltage (50 Hz) FINISH DISSIPATION FACTOR Capacitor body completely protective lacquered Max. 0.05 % MARKING Measuring frequencies: 1 MHz (< 1 nF); 300 kHz or 100 kHz ( 1 nF) Type designator, capacitance value and tolerance, rated peak voltage, production date code, ceramic material code, manufacturer logo INSULATION RESISTANCE ACCESSORIES ADDED Two screws and washers Document Number: 22099 Revision: 02-May-11 Min. 10 000 M (at 25 C) OPERATING TEMPERATURE RANGE - 55 C to + 100 C For technical questions, contact: powcap@vishay.com www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FPS 60, FPS 80, FPS 110 RF Power Plate Capacitors with Flat Rim, Class 1 Ceramic Vishay Draloric SAP PART NUMBER, ELECTRICAL AND DIMENSIONAL DATA PART NUMBER CERAMIC CAP. VALUE (pF) R42 100 RATED VOLTAGE (kVp) (2) RATED POWER (kvar) (1) RATED CURRENT (ARMS) DIA. DMAX. mm (inches) WIDTH W1 mm (inches) WIDTH W2 mm (inches) 29 1 (1.14 0.04) 20 1 (0.79 0.04) 30 1 (1.18 0.04) 21 1 (0.83 0.04) 29 1 (1.14 0.04) 20 1 (0.79 0.04) 27 1 (1.06 0.04) 18 1 (0.71 0.04) 25 1 (0.98 0.04) 16 1 (0.63 0.04) 29 3 (1.14 0.12) 15 3 (0.59 0.12) 27 3 (1.06 0.12) 11 3 (0.43 0.12) 30 3 (1.18 0.12) 16 3 (0.63 0.12) TYPE FPS 60 FPS060WF10136BH1 FPS060WF20136BJ1 200 12 FPS060WF25136BJ1 10 250 62 (2.44) 13 R85 FPS060WF30136BJ1 300 FPS060BH50136BJ1 500 10 500 7.0 15 13 1000 3.5 15 16 1000 12 30 13 TYPE FPS 80 FPS080VY50136BJ1 80 (3.15) R85 FPS080VT10236BJ1 TYPE FPS 110 FPS110BF10236BJ1 R85 110 + 0 /- 6 (4.33 + 0/- 0.24) Notes (1) The surface temperature during operation must not exceed + 100 C (2) Peak-to-peak voltage DIMENSIONS in millimeters (inches) W1 D M6 Threads W2 Note * Dimensions W2 will vary depending upon capacitance value www.vishay.com 2 For technical questions, contact: powcap@vishay.com Document Number: 22099 Revision: 02-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000