Document Number: 22099 For technical questions, contact: powcap@vishay.com www.vishay.com
Revision: 02-May-11 1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
RF Power Plate Capacitors with Flat Rim,
Class 1 Ceramic
FPS 60, FPS 80, FPS 110
Vishay Draloric
MATERIAL
Capacitor elements made from Class 1 ceramic dielectric
with noble metal electrodes.
Connection terminals made from copper/brass, silver plated
FINISH
Capacitor body completely protective lacquered
MARKING
Type designator, capacitance value and tolerance, rated
peak voltage, production date code, ceramic material code,
manufacturer logo
ACCESSORIES ADDED
Two screws and washers
FEATURES
Low losses
High reliability
Small dimensions
APPLICATIONS
Industrial high frequency appliances
Medical RF equipment
Filter, bypass, and coupling circuits
CAPACITANCE RANGE
100 pF to 1.0 nF
CAPACITANCE TOLERANCE
± 10 %
CERAMIC DIELECTRICS
R42 (TCC - 250 ppm/K)
R85 (TCC - 750 ppm/K)
RATED VOLTAGE
3.5 kVpp (peak-to-peak voltage)
7.0 kVpp (peak-to-peak voltage)
•10 kV
p
•12 kV
p
•12 kV
pp (peak-to-peak voltage)
DIELECTRIC STRENGTH TEST
200 % of rated voltage (50 Hz)
DISSIPATION FACTOR
Max. 0.05 %
Measuring frequencies:
1 MHz (< 1 nF); 300 kHz or 100 kHz ( 1 nF)
INSULATION RESISTANCE
Min. 10 000 M (at 25 °C)
OPERATING TEMPERATURE RANGE
- 55 °C to + 100 °C
QUICK REFERENCE DATA
DESCRIPTION VALUE
Ceramic Class 1
Ceramic Dielectric R42, R85
Type FPS 60 FPS 80 FPS 110
Voltage (VDC)10 000,
12 000
3500,
7000 12 000
Min. Capacitance (pF) 100 500 1000
Max. Capacitance (pF) 500 1000 1000
Mounting Screw terminal
www.vishay.com For technical questions, contact: powcap@vishay.com Document Number: 22099
2Revision: 02-May-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
FPS 60, FPS 80, FPS 110
Vishay Draloric RF Power Plate Capacitors with Flat Rim,
Class 1 Ceramic
Notes
(1) The surface temperature during operation must not exceed + 100 °C
(2) Peak-to-peak voltage
Note
Dimensions W2 will vary depending upon capacitance value
SAP PART NUMBER, ELECTRICAL AND DIMENSIONAL DATA
PART NUMBER CERAMIC
CAP.
VALUE
(pF)
RATED
VOLTAGE
(kVp) (2)
RATED
POWER
(kvar) (1)
RATED
CURRENT
(ARMS)
DIA.
DMAX.
mm (inches)
WIDTH
W1
mm (inches)
WIDTH
W2
mm (inches)
TYPE FPS 60
FPS060WF10136BH1
R42 100
12
10 13 62
(2.44)
29 ± 1
(1.14 ± 0.04)
20 ± 1
(0.79 ± 0.04)
FPS060WF20136BJ1
R85
200 30 ± 1
(1.18 ± 0.04)
21 ± 1
(0.83 ± 0.04)
FPS060WF25136BJ1
250 29 ± 1
(1.14 ± 0.04)
20 ± 1
(0.79 ± 0.04)
FPS060WF30136BJ1
300 27 ± 1
(1.06 ± 0.04)
18 ± 1
(0.71 ± 0.04)
FPS060BH50136BJ1
500 10 25 ± 1
(0.98 ± 0.04)
16 ± 1
(0.63 ± 0.04)
TYPE FPS 80
FPS080VY50136BJ1
R85
500 7.0 15 13 80
(3.15)
29 ± 3
(1.14 ± 0.12)
15 ± 3
(0.59 ± 0.12)
FPS080VT10236BJ1
1000 3.5 15 16 27 ± 3
(1.06 ± 0.12)
11 ± 3
(0.43 ± 0.12)
TYPE FPS 110
FPS110BF10236BJ1
R85 1000 12 30 13 110 + 0 /- 6
(4.33 + 0/- 0.24)
30 ± 3
(1.18 ± 0.12)
16 ± 3
(0.63 ± 0.12)
DIMENSIONS in millimeters (inches)
W1
W2
M6 Threads
D
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.