JOG-01045 001 OKI Electronics Components Preliminary OD9243N Rev. 3 [12. 2003] 10Gbps PIN-Preamplifier surface mount receiver module 1. DESCRIPTION The OD9243N is the 10Gbps receiver module which incorporates a high speed pin-photodiode and a High Gain trans-impedance amplifier (TIA). This receiver is specifically designed for OC-192 SONET/SDH STM-64 and 10-Gbps Ethernet applications.The outline is based on the MSA that defines small footprint coplanar OC-192 receivers. 2. FEATURES * High Data Rate Capability up to10.7Gb/s. * High Responsivity InGaAs PIN-photodiode. * +3.3V TIA and PD Supply. * Small Footprint Coplanar Output. 3. APPLICATION * OC-192 SONET/SDH STM-64 * 10Gbps Ethernet 4.OPTICAL AND ELECTRICAL CHARACTERISTICS (=1550nm,Ta = +25C, VCC=+3.3V, VPD=+3.3V, unless otherwise specified) Parameter Wavelength Symbol PIN-PD Responsivity RPD Dark Current ID Transimpedance Zt Bandwidth BW Sensitivity Prmin Overload Prmax Group Delay Equivarent input Noise Current density Maximum Output Voltage Swing Supply Current GD In Test Conditions -=1550nm =1310nm VPD=+3.3V RL=100 Differential f3dB,RL=50 P_in=-20dBm 9.95328Gbps,NRZ,BER=10-12 PRBS231-1 ,Rext =12dB 9.95328Gbps,NRZ,BER=10-12 ,PRBS231-1 ,Rext=12dB 130MHz to 3dB BW RL=50 Average within BW RL=50Pin=0mW Min. 1250 0.75 0.75 -- Typ. -0.9 0.85 -- Max. 1620 --1.0 Unit nm 2.3 4 -- k 8 9 -- GHz -- -21.0 -20 dBm 0 +2.0 -- dBm -- 40 -- ps -- 10 14 pA/Hz A/W nA Vout RL=50 100 150 Pin=0mW - -+3.1 +3.1 -- 55 +3.3 +3.3 0.18 75 +3.5 +10 0.26 mA Power Dissipation ICC VCC VPD P Electrical Return Loss ERL -- -- -8 dB Optical Return Loss ORL -- -- -27 dB Pin=0mW 130MHz-10GHz Diffrential S22 =1550nm mVpp V W JOG-01045 Rev.3 OKI Electronics Components OD9243N 5.ABSOLUTE MAXIMUM RATING Parameter TIA Supply Voltage PD Supply Voltage Incident Optical Power Operating Temparature Stroage Temparature Symbol VCC VPD Pin Top Tstg 6. CONNECTOR AND FIBER SPECIFICATIONS Parameter Type Mode Field Diameter Cladding Diameter Jaket Diameter Length Standard Connector (Ta = +25 C, unless otherwise specified) Rating Unit +5 V +15 V +5.0 dBm -20 to 85 C -40 to 85 C Specifications SM 10 125 900 1 SC/SPC 7. ORDERING INFORMATION OD9243N - _ _ _ Connector (SC)* FC LC MU Fiber Color - -: White* Y: Yellow B: Blue * : Standard. No need to indicate. Unit -um um um m -- JOG-01045 Rev.3 OKI Electronics Components OD9243N 8.OUTLINE DRAWING All dimensions in millimeters PACKAGE NO. OD9243N (UNIT: MM) Pin Connection 9. BLOCK DIAGRAM 2,Vpd 14,Vcc R PIN-PD 3,4,5,13,15,16 NC TIA 10,Out 8,OutB 1,6,7,9,11,12,17 GND 1 Case GND 2 VPD (PIN-PD Bias) 3 NC 4 NC 5 NC 6 Case GND 7 Case GND 8 OUTB (AC-coupled) 9 Case GND 10 OUT (AC-coupled) 11 Case GND 12 Case GND 13 NC 14 Vcc (TIA Power supply) 15 NC 16 NC 17 Case GND JOG-01045 Rev.3 OKI Electronics Components OD9243N 10.TYPICAL OPERATING CHARACTERISCTICS BER Characteristics Frequency Characterristics 9.95328Gbps,NRZ,PRBS231-1,Rext=11dB,EA-LD =1550nm,RL=50 P_in=-20dBmVCC=3.3 VPD=3.3V ,Ta=25C 10-3 Bit Error Rate 10-4 40 10-5 Out OutB 30 10-6 20 10-7 10-8 10 -9 10 0 10-10 -11 10 -12 10 -25 -20 -15 -10 -5 0 Optical Input Power [dBm] R=0.89A/W -10 0 5 10 15 typ -20degC,power supply-5% 85degC,power supply+5% Eyepattern -20dBm10mV/div,20ps/div 0dBm50mV/div,20ps/div 20 Freq. (GHz) -10dBm50mV/div,20ps/div JOG-01045 Rev.3 OKI Electronics Components OD9243N SAFETY INFORMATION ON THIS PRODUCT The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled, ingested or swallowed. GaAs Do not destory or burn the product. Product Do not crush or chemically dissolve the product. Do not put the product in the mouth. Observe related laws and company regulations when discarding this product. The product should be excluded from general industrial waste or household garbage. Caution A glass-fiber is attached on the product. Handle with care. Optical Fiber When the fiber is broken or damaged, handle carefully to avoid injury from the damaged part or fragments. Caution JOG-01045 Rev.3 OKI Electronics Components OD9243N Notice 1. The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. 2. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. 3. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. 4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. 5. Neither indemnity against nor license of a third party's industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. 6. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. 7. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. 8. No part of the contents contained herein may be reprinted or reproduced without our prior permission. Sales Support JAPAN/ASIA Oki Electric Industry Co., Ltd. 550-1, Higashiasakawa-cho, Hachioji-shi, Tokyo 193-8550 Phone: +81-426-62-6646 INTERNET: http://www.oki.com AMERICA Oki Optical Components 785 North Mary Avenue, Sunnyvale, CA 94086 Phone: +1-408-737-6379 Fax: +1-408-737-6579 INTERNET: http://www.okioptical.com EUROPE Oki Electric Europe GmbH D-41460 Neuss, Germany Phone: +49-2131-15960 Fax: +49-2131-103539 INTERNET: http://www.oki-europe.de Copyright 2002 Oki Electric Industry Co., Ltd