JOG-01045 001
OKI Electronics Components Rev. 3 [12. 2003]
OD9243N Preliminary
10Gbps PIN-Preamplifier surface mount receiver module
Parameter Symbol Test Conditions Min. Typ. Max. Unit
Wavelength λ -- 1250 -- 1620 nm
λ=1550nm 0.75 0.9 --
PIN-PD Responsivity RPD λ=1310nm 0.75 0.85 --
A/W
Dark Current ID VPD=+3.3V -- -- 1.0 nA
Transimpedance Zt
RL=100Ω
Differential 2.3 4 -- kΩ
Bandwidth BW
f3dB,RL=50Ω
P_in=-20dBm 8 9 -- GHz
Sensitivity Prmin
9.95328Gbps,NRZ,BER=10-12
PRBS231-1 ,Rext =12dB -- -21.0 -20 dBm
Overload Prmax
9.95328Gbps,NRZ,BER=10-12
,PRBS231-1 ,Rext=12dB 0 +2.0 -- dBm
Group Delay GD 130MHz to 3dB BW
RL=50Ω -- ±40 -- ps
Equivarent input Noise
Current density In Average within BW
RL=50Ω、Pin=0mW -- 10 14 pA/√Hz
Maximum Output Voltage
Swing Vout RL=50Ω 100 150 mVpp
Supply Current ICC Pin=0mW -- 55 75 mA
VCC - +3.1 +3.3 +3.5
VPD +3.1 +3.3 +10 V
Power Dissipation P Pin=0mW -- 0.18 0.26 W
Electrical Return Loss ERL 130MHz-10GHz
Diffrential S22 -- -- -8 dB
Optical Return Loss ORL λ=1550nm -- -- -27 dB
1. DESCRIPTION
The OD9243N is the 10Gbps receiver module which incorporates a high speed pin-photodiode and a
High Gain trans-impedance amplifier (TIA). This receiver is specifically designed for OC-192
SONET/SDH STM-64 and 10-Gbps Ethernet applications.The outline is based on the MSA that defines
small footprint coplanar OC-192 receivers.
2. FEATURES
• High Data Rate Capability up to10.7Gb/s.
• High Responsivity InGaAs PIN-photodiode.
• +3.3V TIA and PD Supply.
• Small Footprint Coplanar Output.
3. APPLICATION
• OC-192 SONET/SDH STM-64
• 10Gbps Ethernet
4.OPTICAL AND ELECTRICAL CHARACTERISTICS
(λ=1550nm,Ta = +25°C, VCC=+3.3V, VPD=+3.3V, unless otherwise specified)
JOG-01045 Rev.3
OKI Electronics Components OD9243N
5.ABSOLUTE MAXIMUM RATING
(Ta = +25 °C, unless otherwise specified)
Parameter Symbol Rating Unit
TIA Supply Voltage VCC +5 V
PD Supply Voltage VPD +15 V
Incident Optical Power Pin +5.0 dBm
Operating Temparature Top -20 to 85 °C
Stroage Temparature Tstg -40 to 85 °C
6. CONNECTOR AND FIBER SPECIFICATIONS
Parameter Specifications Unit
Type SM --
Mode Field Diameter 10 um
Cladding Diameter 125 um
Jaket Diameter 900 um
Length 1 m
Standard Connector SC/SPC --
7. ORDERING INFORMATION
OD9243N - _ _ _
Connector Fiber Color
(SC)* - -: White*
FC Y: Yellow * : Standard. No need to indicate.
LC B: Blue
MU
JOG-01045 Rev.3
OKI Electronics Components OD9243N
8.OUTLINE DRAWING
All dimensions in millimeters
PACKAGE NO. OD9243N (UNIT: MM)
Case GND 17
N
C 16
N
C 15
Vcc
(
TIA Power su
pp
l
y)
14
N
C 13
Case GND 12
Case GND 11
OUT
(
AC-cou
p
led
)
10
Case GND 9
OUTB
(
AC-cou
p
led
)
8
Case GND 7
Case GND 6
N
C 5
N
C 4
N
C 3
V
PD
(
PIN-PD Bias
)
2
Case GND 1
Pin Connection
9. BLOCK DIAGRAM
3
4
5
13
15
16
N
C
TI
A
10
,
Ou
t
8
,
OutB
1
,
6
,
7
,
9
,
11
,
12
,
17
GND
14
,
Vcc
2
,
V
p
d
PIN-PD
R
JOG-01045 Rev.3
OKI Electronics Components OD9243N
10.TYPICAL OPERATING CHARACTERISCTICS
BER Characteristics Frequency Characterristics
9.95328Gbps,NRZ,PRBS231-1,Rext=11dB,EA-LD
λ=1550nm,RL=50P_in=-20dBmVCC=3.3
VPD=3.3V ,Ta=25°C
101010
101010
101010
10
-3
10
-4
10
-5
10
-6
10
-7
10
-8
10
-9
-10
-11
-12
-25 -20 -15 -10 -5 0
Optical Input Power [dBm]
Bit Error Rate
10
-3
10
-4
10
-5
10
-6
10
-7
10
-8
10
-9
-10
-11
-12
-25 -20 -15 -10 -5 0
Optical Input Power [dBm]
Bit Error Rate
10
-3
10
-4
10
-5
10
-6
10
-7
10
-8
10
-9
-10
-11
-12
-25 -20 -15 -10 -5 0
Optical Input Power [dBm]
Bit Error Rate
-10
0
10
20
30
40
0 5 10 15 20
Out
OutB
Freq. (GHz)
R=0.89A/W ○：typ
○：-20degC,power supply-5%
○：85degC,power supply+5%
Eyepattern
-20dB
m
：10mV/div,20
p
s/div -10dB
m
：50mV/div,20
p
s/div
0dB
m
：50mV/div,20
p
s/div
JOG-01045 Rev.3
OKI Electronics Components OD9243N
SAFETY INFORMATION ON THIS PRODUCT
Caution
GaAs
Product
The product contains gallium arsenide, GaAs.
GaAs vapor and powder are hazardous to human health if inhaled, ingested or
swallowed.
Do not destory or burn the product.
Do not crush or chemically dissolve the product.
Do not put the product in the mouth.
Observe related laws and company regulations when discarding this product.
The product should be excluded from general industrial waste or household
garbage.
Caution
Optical Fiber
A glass-fiber is attached on the product. Handle with care.
When the fiber is broken or damaged, handle carefully to avoid injury from
the damaged part or fragments.
JOG-01045 Rev.3
OKI Electronics Components OD9243N
Notice
1. The information contained herein can change without notice owing to product and/or technical improvements.
Before using the product, please make sure that the information being referred to is up-to-date.
2. The outline of action and examples for application circuits described herein have been chosen as an
explanation for the standard action and performance of the product. When planning to use the product, please
ensure that the external conditions are reflected in the actual circuit, assembly, and program designs.
3. When designing your product, please use our product below the specified maximum ratings and within the
specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating
temperature.
4. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation
resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or
unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified
maximum ratings or operation outside the specified operating range.
5. Neither indemnity against nor license of a third party’s industrial and intellectual property right, etc. is
granted by us in connection with the use of the product and/or the information and drawings contained herein.
No responsibility is assumed by us for any infringement of a third party’s right which may result from the use
thereof.
6. The products listed in this document are intended for use in general electronics equipment for commercial
applications (e.g., office automation, communication equipment, measurement equipment, consumer
electronics, etc.). These products are not authorized for use in any system or application that requires special
or enhanced quality and reliability characteristics nor in any system or application where the failure of such
system or application may result in the loss or damage of property, or death or injury to humans.
Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace
equipment, nuclear power control, medical equipment, and life-support systems.
7. Certain products in this document may need government approval before they can be exported to particular
countries. The purchaser assumes the responsibility of determining the legality of export of these products and
will take appropriate and necessary steps at their own expense for these.
8. No part of the contents contained herein may be reprinted or reproduced without our prior permission.
Sales Support
JAPAN/ASIA Oki Electric Industry Co., Ltd.
550-1, Higashiasakawa-cho, Hachioji-shi, Tokyo 193-8550
Phone: +81-426-62-6646
INTERNET: http://www.oki.com
AMERICA Oki Optical Components
785 North Mary Avenue, Sunnyvale, CA 94086
Phone: +1-408-737-6379 Fax: +1-408-737-6579
INTERNET: http://www.okioptical.com
EUROPE Oki Electric Europe GmbH
D-41460 Neuss, Germany
Phone: +49-2131- 15960 Fax: +49-2131-103539
INTERNET: http://www.oki-europe.de
Copyright 2002 Oki Electric Industry Co., Ltd