http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
0.6±0.03 0.3±0.03
0.3±0.03
0.15±0.05
(in mm)
: Electrode
(Resistance element becomes dominant
at high frequencies.)
EMIFILr (Inductor type) Chip Ferrite Bead
BLM03B Series (0201 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 15000
J330mm Paper Tape 50000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM03BD750SN1p75ohm ±25% - 300mA 0.4ohm max. -55 to +125°C
BLM03BD121SN1p120ohm ±25% - 250mA 0.5ohm max. -55 to +125°C
BLM03BD241SN1p240ohm ±25% - 200mA 0.8ohm max. -55 to +125°C
BLM03BD471SN1p470ohm ±25% - 215mA 1.5ohm max. -55 to +125°C
BLM03BD601SN1p600ohm ±25% - 200mA 1.7ohm max. -55 to +125°C
BLM03BB100SN1p10ohm ±25% - 300mA 0.4ohm max. -55 to +125°C
BLM03BB220SN1p22ohm ±25% - 200mA 0.5ohm max. -55 to +125°C
BLM03BB470SN1p47ohm ±25% - 200mA 0.7ohm max. -55 to +125°C
BLM03BB750SN1p75ohm ±25% - 200mA 1.0ohm max. -55 to +125°C
BLM03BB121SN1p120ohm ±25% - 100mA 1.5ohm max. -55 to +125°C
BLM03BC330SN1p33ohm ±25% - 150mA 0.85ohm max. -55 to +125°C
BLM03BC560SN1p56ohm ±25% - 100mA 1.05ohm max. -55 to +125°C
BLM03BC800SN1p80ohm ±25% - 100mA 1.40ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
200
400
600
800
1000
1200
BLM03BD121SN1
BLM03BD750SN1
BLM03BD241SN1
BLM03BD471SN1
BLM03BD601SN1
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
BLM03BB121SN1
BLM03BB470SN1
BLM03BB220SN1
BLM03BB100SN1
BLM03BB750SN1
800
600
400
200
0
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
300
600
900
1200
1500
BLM03BC560SN1
BLM03BC330SN1
BLM03BC800SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
50
0
150
200
100 Z
RX
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
60
120
180
240
300
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
Z
RX
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics (Main Items)
BLM03BD Series
■ Impedance-Frequency Characteristics (Main Items)
BLM03BB Series
■ Impedance-Frequency Characteristics (Main Items)
BLM03BC Series
■ Impedance-Frequency Characteristics
BLM03BD750SN1
■ Impedance-Frequency Characteristics
BLM03BD121SN1
■ Impedance-Frequency Characteristics
BLM03BD241SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
20
40
60
80
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
50
100
150
200
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
150
300
450
600
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM03BD471SN1
■ Impedance-Frequency Characteristics
BLM03BD601SN1
■ Impedance-Frequency Characteristics
BLM03BB100SN1
■ Impedance-Frequency Characteristics
BLM03BB220SN1
■ Impedance-Frequency Characteristics
BLM03BB470SN1
■ Impedance-Frequency Characteristics
BLM03BB750SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
4
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
200
400
600
800
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
600
500
400
300
200
100
0
R
X
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
300
600
900
1200
1500
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM03BB121SN1
■ Impedance-Frequency Characteristics
BLM03BC330SN1
■ Impedance-Frequency Characteristics
BLM03BC560SN1
■ Impedance-Frequency Characteristics
BLM03BC800SN1
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
0.5±0.05
0.5±0.05
1.0±0.05
0.25±0.1
(in mm)
: Electrode
(Resistance element becomes dominant
at high frequencies.)
EMIFILr (Inductor type) Chip Ferrite Bead
BLM15B Series (0402 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 10000
J330mm Paper Tape 50000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM15BD750SN1p75ohm ±25% - 300mA 0.20ohm max. -55 to +125°C
BLM15BD121SN1p120ohm ±25% - 300mA 0.30ohm max. -55 to +125°C
BLM15BD221SN1p220ohm ±25% - 300mA 0.40ohm max. -55 to +125°C
BLM15BD471SN1p470ohm ±25% - 200mA 0.60ohm max. -55 to +125°C
BLM15BD601SN1p600ohm ±25% - 200mA 0.65ohm max. -55 to +125°C
BLM15BD102SN1p1000ohm ±25% - 200mA 0.90ohm max. -55 to +125°C
BLM15BD182SN1p1800ohm ±25% - 100mA 1.40ohm max. -55 to +125°C
BLM15BB050SN1p5ohm ±25% - 500mA 0.08ohm max. -55 to +125°C
BLM15BB100SN1p10ohm ±25% - 300mA 0.10ohm max. -55 to +125°C
BLM15BB220SN1p22ohm ±25% - 300mA 0.20ohm max. -55 to +125°C
BLM15BB470SN1p47ohm ±25% - 300mA 0.35ohm max. -55 to +125°C
BLM15BB750SN1p75ohm ±25% - 300mA 0.40ohm max. -55 to +125°C
BLM15BB121SN1p120ohm ±25% - 300mA 0.55ohm max. -55 to +125°C
BLM15BB221SN1p220ohm ±25% - 200mA 0.80ohm max. -55 to +125°C
BLM15BC121SN1p120ohm ±25% - 350mA 0.45ohm max. -55 to +125°C
BLM15BC241SN1p240ohm ±25% - 250mA 0.70ohm max. -55 to +125°C
BLM15BA050SN1p5ohm ±25% - 300mA 0.10ohm max. -55 to +125°C
BLM15BA100SN1p10ohm ±25% - 300mA 0.20ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM15BA220SN1p22ohm ±25% - 300mA 0.30ohm max. -55 to +125°C
BLM15BA330SN1p33ohm ±25% - 300mA 0.40ohm max. -55 to +125°C
BLM15BA470SN1p47ohm ±25% - 200mA 0.60ohm max. -55 to +125°C
BLM15BA750SN1p75ohm ±25% - 200mA 0.80ohm max. -55 to +125°C
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
2000
1500
1000
500
0
BLM15BD182SN1
BLM15BD102SN1
BLM15BD601SN1
BLM15BD471SN1
BLM15BD221SN1
BLM15BD121SN1
BLM15BD750SN1
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
900
600
300
0
BLM15BB221SN1
BLM15BB750SN1
BLM15BB470SN1
BLM15BB220SN1
BLM15BB100SN1
BLM15BB050SN1
BLM15BB121SN1
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
1000
2000
3000
4000
BLM15BC241SN1
BLM15BC121SN1
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
1000
2000
3000
4000
5000
BLM15BA330SN1
BLM15BA470SN1
BLM15BA750SN1
BLM15BA220SN1
BLM15BA100SN1
BLM15BA050SN1
Number of Circuits: 1
■ Impedance-Frequency Characteristics (Main Items)
BLM15BD Series
■ Impedance-Frequency Characteristics (Main Items)
BLM15BB Series
■ Impedance-Frequency Characteristics (Main Items)
BLM15BC Series
■ Impedance-Frequency Characteristics (Main Items)
BLM15BA Series
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
1000
2000
3000
4000
5000
BLM15BA750SN1
BLM15BA470SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
150
100
50
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
250
200
150
100
50
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1000
900
800
700
600
500
400
300
200
100
0
Z
R
X
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1000
800
600
400
200
0
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics (Main Items)
BLM15BA Series
■ Impedance-Frequency Characteristics
BLM15BD750SN1
■ Impedance-Frequency Characteristics
BLM15BD121SN1
■ Impedance-Frequency Characteristics
BLM15BD221SN1
■ Impedance-Frequency Characteristics
BLM15BD471SN1
■ Impedance-Frequency Characteristics
BLM15BD601SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
4
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1500
1000
500
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
2000
1500
1000
500
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
25
20
15
10
5
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
60
45
30
15
Z
R
X
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
20
40
60
80
120
100
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
250
200
150
100
50
Z
R
X
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM15BD102SN1
■ Impedance-Frequency Characteristics
BLM15BD182SN1
■ Impedance-Frequency Characteristics
BLM15BB050SN1
■ Impedance-Frequency Characteristics
BLM15BB100SN1
■ Impedance-Frequency Characteristics
BLM15BB220SN1
■ Impedance-Frequency Characteristics
BLM15BB470SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
5
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
Z
X
R
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
500
400
300
200
100
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
900
600
300 Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
1000
800 Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
500
1000
1500
3000
2000
2500 Z
RX
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
20
40
60
80
100
120
Z
R
X
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM15BB750SN1
■ Impedance-Frequency Characteristics
BLM15BB121SN1
■ Impedance-Frequency Characteristics
BLM15BB221SN1
■ Impedance-Frequency Characteristics
BLM15BC121SN1
■ Impedance-Frequency Characteristics
BLM15BC241SN1
■ Impedance-Frequency Characteristics
BLM15BA050SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
6
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
40
80
120
160
200
240
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
100
200
300
400
500
600
R
X
Z
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
400
800
1200
1600
2000
Z
X
R
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
1000
2000
3000
4000
5000
Z
X
R
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM15BA100SN1
■ Impedance-Frequency Characteristics
BLM15BA220SN1
■ Impedance-Frequency Characteristics
BLM15BA330SN1
■ Impedance-Frequency Characteristics
BLM15BA470SN1
■ Impedance-Frequency Characteristics
BLM15BA750SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
7
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
0.4±0.2
1.6±0.15 0.8±0.15
0.8±0.15
(in mm)
: Electrode
(Resistance element becomes dominant
at high frequencies.)
EMIFILr (Inductor type) Chip Ferrite Bead
BLM18B Series (0603 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
J330mm Paper Tape 10000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM18BD470SN1p47ohm ±25% - 500mA 0.30ohm max. -55 to +125°C
BLM18BD121SN1p120ohm ±25% - 200mA 0.40ohm max. -55 to +125°C
BLM18BD151SN1p150ohm ±25% - 200mA 0.40ohm max. -55 to +125°C
BLM18BD221SN1p220ohm ±25% - 200mA 0.45ohm max. -55 to +125°C
BLM18BD331SN1p330ohm ±25% - 200mA 0.50ohm max. -55 to +125°C
BLM18BD421SN1p420ohm ±25% - 200mA 0.55ohm max. -55 to +125°C
BLM18BD471SN1p470ohm ±25% - 200mA 0.55ohm max. -55 to +125°C
BLM18BD601SN1p600ohm ±25% - 200mA 0.65ohm max. -55 to +125°C
BLM18BD102SN1p1000ohm ±25% - 100mA 0.85ohm max. -55 to +125°C
BLM18BD152SN1p1500ohm ±25% - 50mA 1.20ohm max. -55 to +125°C
BLM18BD182SN1p1800ohm ±25% - 50mA 1.50ohm max. -55 to +125°C
BLM18BD222SN1p2200ohm ±25% - 50mA 1.50ohm max. -55 to +125°C
BLM18BD252SN1p2500ohm ±25% - 50mA 1.50ohm max. -55 to +125°C
BLM18BB050SN1p5ohm ±25% - 700mA 0.05ohm max. -55 to +125°C
BLM18BB100SN1p10ohm ±25% - 700mA 0.10ohm max. -55 to +125°C
BLM18BB220SN1p22ohm ±25% - 600mA 0.20ohm max. -55 to +125°C
BLM18BB470SN1p47ohm ±25% - 550mA 0.25ohm max. -55 to +125°C
BLM18BB600SN1p60ohm ±25% - 550mA 0.25ohm max. -55 to +125°C
Number of Circuits: 1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLM18BB750SN1p75ohm ±25% - 500mA 0.30ohm max. -55 to +125°C
BLM18BB121SN1p120ohm ±25% - 500mA 0.30ohm max. -55 to +125°C
BLM18BB141SN1p140ohm ±25% - 450mA 0.35ohm max. -55 to +125°C
BLM18BB151SN1p150ohm ±25% - 450mA 0.37ohm max. -55 to +125°C
BLM18BB221SN1p220ohm ±25% - 450mA 0.45ohm max. -55 to +125°C
BLM18BB331SN1p330ohm ±25% - 400mA 0.58ohm max. -55 to +125°C
BLM18BB471SN1p470ohm ±25% - 300mA 0.85ohm max. -55 to +125°C
BLM18BA050SN1p5ohm ±25% - 500mA 0.20ohm max. -55 to +125°C
BLM18BA100SN1p10ohm ±25% - 500mA 0.25ohm max. -55 to +125°C
BLM18BA220SN1p22ohm ±25% - 500mA 0.35ohm max. -55 to +125°C
BLM18BA470SN1p47ohm ±25% - 300mA 0.55ohm max. -55 to +125°C
BLM18BA750SN1p75ohm ±25% - 300mA 0.70ohm max. -55 to +125°C
BLM18BA121SN1p120ohm ±25% - 200mA 0.90ohm max. -55 to +125°C
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
250
500
750
1000
BLM18BD421SN1
BLM18BD331SN1
BLM18BD221SN1
BLM18BD151SN1
BLM18BD121SN1
BLM18BD470SN1
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
500
1000
1500
2000
2500
BLM18BD252SN1
BLM18BD222SN1
BLM18BD182SN1
BLM18BD152SN1
BLM18BD102SN1
BLM18BD601SN1
BLM18BD471SN1
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
BLM18BB750SN1
BLM18BB600SN1
BLM18BB470SN1
BLM18BB220SN1
BLM18BB100SN1
BLM18BB050SN1
0
100
200
300
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
2000
1500
1000
500
0
BLM18BB471SN1
BLM18BB331SN1
BLM18BB221SN1
BLM18BB151SN1
BLM18BB141SN1
BLM18BB121SN1
Number of Circuits: 1
■ Impedance-Frequency Characteristics (Main Items)
BLM18BD Series (47ohm to 420ohm)
■ Impedance-Frequency Characteristics (Main Items)
BLM18BD Series (470ohm to 2500ohm)
■ Impedance-Frequency Characteristics (Main Items)
BLM18BB Series (5ohm to 75ohm)
■ Impedance-Frequency Characteristics (Main Items)
BLM18BB Series (120ohm to 470ohm)
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
100
200
300
400
500
BLM18BA220SN1
BLM18BA100SN1
BLM18BA050SN1
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
10000
7500
5000
2500
BLM18BA121SN1
BLM18BA750SN1
BLM18BA470SN1
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
X
0
50
100
150
R
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
0
100
200
300
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
400
200
300
100
0
ZR
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
ZR
X
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics (Main Items)
BLM18BA Series (5ohm to 22ohm)
■ Impedance-Frequency Characteristics (Main Items)
BLM18BA Series (47ohm to 120ohm)
■ Impedance-Frequency Characteristics
BLM18BD470SN1
■ Impedance-Frequency Characteristics
BLM18BD121SN1
■ Impedance-Frequency Characteristics
BLM18BD151SN1
■ Impedance-Frequency Characteristics
BLM18BD221SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
4
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
R
X
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
250
500
750
1000
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1200
900
600
300
0
Z
R
X
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
500
1000
1500
2000
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
500
1000
1500
2000
ZR
X
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM18BD331SN1
■ Impedance-Frequency Characteristics
BLM18BD421SN1
■ Impedance-Frequency Characteristics
BLM18BD471SN1
■ Impedance-Frequency Characteristics
BLM18BD601SN1
■ Impedance-Frequency Characteristics
BLM18BD102SN1
■ Impedance-Frequency Characteristics
BLM18BD152SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
5
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
600
1200
1800
2400
ZR
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
2500
2000
1500
1000
500
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
500
1000
1500
2000
2500
ZR
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
5
10
15
20
25
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
20
40
60
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
ZR
X
0
30
60
90
120
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM18BD182SN1
■ Impedance-Frequency Characteristics
BLM18BD222SN1
■ Impedance-Frequency Characteristics
BLM18BD252SN1
■ Impedance-Frequency Characteristics
BLM18BB050SN1
■ Impedance-Frequency Characteristics
BLM18BB100SN1
■ Impedance-Frequency Characteristics
BLM18BB220SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
6
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
200
250
150
100
50
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
100
200
300
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
100
200
300
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
500
400
300
100
200
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
600
450
300
150
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
ZR
X
0
150
300
450
600
750
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM18BB470SN1
■ Impedance-Frequency Characteristics
BLM18BB600SN1
■ Impedance-Frequency Characteristics
BLM18BB750SN1
■ Impedance-Frequency Characteristics
BLM18BB121SN1
■ Impedance-Frequency Characteristics
BLM18BB141SN1
■ Impedance-Frequency Characteristics
BLM18BB151SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
7
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
250
500
750
1000
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1500
1200
900
600
300
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
500
1000
1500
2000
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
30
60
90
120
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
150
100
50
R
X
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
Z
0
100
200
300
400
500
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM18BB221SN1
■ Impedance-Frequency Characteristics
BLM18BB331SN1
■ Impedance-Frequency Characteristics
BLM18BB471SN1
■ Impedance-Frequency Characteristics
BLM18BA050SN1
■ Impedance-Frequency Characteristics
BLM18BA100SN1
■ Impedance-Frequency Characteristics
BLM18BA220SN1
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
8
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
Z
X
0
500
1000
1500
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
1500
3000
4500
ZR
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
10000
7500
5000
2500
ZRX
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
■ Impedance-Frequency Characteristics
BLM18BA470SN1
■ Impedance-Frequency Characteristics
BLM18BA750SN1
■ Impedance-Frequency Characteristics
BLM18BA121SN1
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array)
(1) (2) (3) (4)
(5) (6) (7) (8)
2.0±0.2
0.25±0.15 0.5±0.1
0.2±0.15
1.0±0.2
0.5±0.1
(in mm)
: Electrode No polarity.
(1) (2) (3) (4)
(5) (6) (7) (8)
EMIFILr (Inductor type) Chip Ferrite Bead (Array)
BLA2AA/BLA2AB Series (0804 Size)
■ Dimensions ■ Equivalent Circuit
■ Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 10000
J330mm Paper Tape 50000
BBulk(Bag) 1000
■ Rated Value (p: packaging code)
Part Number Impedance
(at 100MHz/20°C) Impedance
(at 1GHz/20°C) Rated Current DC Resistance Operating
Temperature Range
BLA2AAG121SN4p120ohm ±25% - 100mA 0.50ohm max. -55 to +125°C
BLA2AAG221SN4p220ohm ±25% - 50mA 0.70ohm max. -55 to +125°C
BLA2AAG601SN4p600ohm ±25% - 50mA 1.10ohm max. -55 to +125°C
BLA2AAG102SN4p1000ohm ±25% - 50mA 1.30ohm max. -55 to +125°C
BLA2ABD750SN4p75ohm ±25% - 200mA 0.20ohm max. -55 to +125°C
BLA2ABD121SN4p120ohm ±25% - 200mA 0.35ohm max. -55 to +125°C
BLA2ABD221SN4p220ohm ±25% - 100mA 0.40ohm max. -55 to +125°C
BLA2ABD471SN4p470ohm ±25% - 100mA 0.65ohm max. -55 to +125°C
BLA2ABD601SN4p600ohm ±25% - 100mA 0.80ohm max. -55 to +125°C
BLA2ABD102SN4p1000ohm ±25% - 50mA 1.00ohm max. -55 to +125°C
BLA2ABB100SN4p10ohm ±25% - 200mA 0.1ohm max. -55 to +125°C
BLA2ABB220SN4p22ohm ±25% - 200mA 0.2ohm max. -55 to +125°C
BLA2ABB470SN4p47ohm ±25% - 200mA 0.35ohm max. -55 to +125°C
BLA2ABB121SN4p120ohm ±25% - 50mA 0.60ohm max. -55 to +125°C
BLA2ABB221SN4p220ohm ±25% - 50mA 0.90ohm max. -55 to +125°C
Number of Circuits: 4
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
1200
900
600
300
0
BLA2AAG601SN
BLA2AAG102SN4
BLA2AAG221SN4
BLA2AAG121SN4
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
1600
1200
800
400
0
BLA2ABD102SN4
BLA2ABD601SN4
BLA2ABD471SN4
BLA2ABD221SN4
BLA2ABD121SN4
BLA2ABD750SN4
Impedance (Ω)
Frequency (MHz)
1 10 100 1000 3000
0
200
400
600
800
1000
BLA2ABB121SN4
BLA2ABB221SN4
BLA2ABB220SN4
BLA2ABB100SN4
BLA2ABB470SN4
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
200
160
120
80
40
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
400
300
200
100
0
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
1000
800
600
400
200
0
Z
X
R
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array)
■ Impedance-Frequency Characteristics (Main Items)
BLA2AAG Series
■ Impedance-Frequency Characteristics (Main Items)
BLA2ABD Series
■ Impedance-Frequency Characteristics (Main Items)
BLA2ABB Series
■ Impedance-Frequency Characteristics
BLA2AAG121SN4
■ Impedance-Frequency Characteristics
BLA2AAG221SN4
■ Impedance-Frequency Characteristics
BLA2AAG601SN4
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
3
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
1250
750
1000
500
250
01 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
50
100
150
200
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
60
120
180
240
300
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
Z
R
X
0
100
200
300
400
500
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
Z
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
X
R
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array)
■ Impedance-Frequency Characteristics
BLA2AAG102SN4
■ Impedance-Frequency Characteristics
BLA2ABD750SN4
■ Impedance-Frequency Characteristics
BLA2ABD121SN4
■ Impedance-Frequency Characteristics
BLA2ABD221SN4
■ Impedance-Frequency Characteristics
BLA2ABD471SN4
■ Impedance-Frequency Characteristics
BLA2ABD601SN4
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
4
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
400
800
1200
1600
Z
X
R
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
10
20
30
40
50
R
X
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
0
25
50
75
100
125
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
R
X
0
50
100
150
200
250
Z
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
150
300
450
600
Z
0
R
X
1 10 100 1000 3000
Frequency (MHz)
Impedance (Ω)
0
200
400
600
800
1000
Z
R
X
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array)
■ Impedance-Frequency Characteristics
BLA2ABD102SN4
■ Impedance-Frequency Characteristics
BLA2ABB100SN4
■ Impedance-Frequency Characteristics
BLA2ABB220SN4
■ Impedance-Frequency Characteristics
BLA2ABB470SN4
■ Impedance-Frequency Characteristics
BLA2ABB121SN4
■ Impedance-Frequency Characteristics
BLA2ABB221SN4
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
5
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
2011.5.12
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array)
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat and deteriorate
the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
■ !Caution/Notice
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type
2012.1.10
oThis data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (LC Combined) Multilayer Type
NFL18ST_H Series (0603 Size)
c Dimensions
(Top View)
(Side View)
(Bottom View)
0.2 min.
0.6±0.1
1.6±0.1
Polarity Marking
0.3±0.1
0.8±0.1
0.2±0.1 0.2±0.1
0.15±0.1
(1) (3)
(2)
(2)
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
0
20
40
60
80
100
1 10 100 1000 3000
Frequency (MHz)
Insertion Loss (dB)
NFL18ST506H1A3
NFL18ST706H1A3
NFL18ST107H1A3
NFL18ST507H1A3
NFL18ST307H1A3
NFL18ST207H1A3
c Equivalent Circuit
Input (Output)
(1)
GND
(2)
Output (Input)
(3)
No Polarity.
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Nominal Cut-off Frequency Capacitance Inductance Insertion Loss 1 Insertion Loss 2 Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage Operating
Temperature Range
NFL18ST506H1A3p
50MHz 110pF (Typ.) 350nH (Typ.) 6dB max.(0 to 50MHz) 30dB min.(200 to 1000MHz) 75mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18ST706H1A3p
70MHz 70pF (Typ.) 230nH (Typ.) 6dB max.(0 to 70MHz) 30dB min.(300 to 1000MHz) 75mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18ST107H1A3p
100MHz 50pF (Typ.) 150nH (Typ.) 6dB max.(0 to 100MHz) 30dB min.(400 to 1000MHz) 75mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18ST207H1A3p
200MHz 22pF (Typ.) 110nH (Typ.) 6dB max.(0 to 200MHz) 30dB min.(800 to 2000MHz) 100mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18ST307H1A3p
300MHz 16pF (Typ.) 74nH (Typ.) 6dB max.(0 to 300MHz) 30dB min.(1200 to 2000MHz) 100mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18ST507H1A3p
500MHz 10pF (Typ.) 42nH (Typ.) 6dB max.(0 to 500MHz) 30dB min.(1700 to 2000MHz) 100mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
Number of Circuits: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type
2012.1.10
oThis data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (LC Combined) Multilayer Type
NFL18ST_X Series (0603 Size)
c Dimensions
0.2 min.
0.25±0.1 0.25±0.1
0.8±0.1
0.8±0.1
0.4±0.1
1.6±0.1
0.2 min.
(1) (3)
(2)
(2)
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
Frequency (MHz)
NFL18ST307X1C3
NFL18ST507X1C3
NFL18ST207X1C3
1 10 100 50001000
0
20
40
60
80
(50Ω - 50Ω)
Insertion Loss (dB)
c Equivalent Circuit
Input (Output)
(1)
GND
(2)
Output (Input)
(3)
No Polarity.
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Nominal Cut-off Frequency Capacitance Inductance Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage Operating
Temperature Range
NFL18ST207X1C3p
200MHz 25pF±20% 110nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL18ST307X1C3p
300MHz 18pF±20% 62nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL18ST507X1C3p
500MHz 10pF±20% 43nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
Number of Circuits: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type
2011.11.2
oThis data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (LC Combined) Multilayer Type
NFL18SP Series (0603 Size)
c Dimensions
0.2 min.
0.6±0.1
0.8±0.1
1.6±0.1
(2)
(3)
(3)
(1)
(1)
(2)
0.4±0.10.3±0.1 0.3±0.1 0.15±0.1
0.15±0.1
0.15±0.1
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
Frequency (MHz)
0
20
40
60
80
1 10 100 1000 2000
NFL18SP207X1A3
NFL18SP157X1A3
NFL18SP307X1A3
NFL18SP507X1A3
Insertion Loss (dB)
(50Ω - 50Ω)
c Equivalent Circuit
GND
(2)
Input (Output) Output (Input)
No polarity.
(3)(1)
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Nominal Cut-off Frequency Capacitance Inductance Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage Operating
Temperature Range
NFL18SP157X1A3p
150MHz 34pF±20% 100nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18SP207X1A3p
200MHz 24pF±20% 80nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18SP307X1A3p
300MHz 19pF±20% 60nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
NFL18SP507X1A3p
500MHz 11pF±20% 38nH±20% 100mA 10Vdc 1000M ohm 30Vdc -55 to +125°C
Number of Circuits: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type
2011.11.2
oThis data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (LC Combined) Multilayer Type
NFL21SP Series (0805 Size)
c Dimensions
1.25±0.1
0.25±0.2
0.3±0.2 0.4±0.2
2.0±0.2
0.6±0.2
0.85±0.1
(2)
(2)
(3)(1)
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
Frequency (MHz)
0
20
40
80
1 10 100 1000 2000
60
NFL21SP106X1C3
NFL21SP206X1C7
NFL21SP506X1C3
NFL21SP706X1C3
NFL21SP107X1C3
NFL21SP157X1C3
NFL21SP307X1C3
NFL21SP207X1C3
NFL21SP407X1C3
NFL21SP507X1C3
Insertion Loss (dB)
(50Ω - 50Ω)
c Equivalent Circuit
GND
(2)
Input (Output) Output (Input)
No polarity.
(3)(1)
c Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
BBulk(Bag) 1000
c Rated Value (p: packaging code)
Part Number Nominal Cut-off Frequency Capacitance Inductance Rated Current Rated Voltage Insulation Resistance (min.) Withstand Voltage Operating
Temperature Range
NFL21SP106X1C3p
10MHz 670pF±20% 680nH±20% 100mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP206X1C7p
20MHz 240pF±20% 700nH±20% 100mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP506X1C3p
50MHz 84pF±20% 305nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP706X1C3p
70MHz 76pF±20% 185nH±20% 150mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP107X1C3p
100MHz 44pF±20% 135nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP157X1C3p
150MHz 28pF±20% 128nH±20% 200mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP207X1C3p
200MHz 22pF±20% 72nH±20% 250mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP307X1C3p
300MHz 19pF±10% 45nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP407X1C3p
400MHz 16pF±10% 34nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
NFL21SP507X1C3p
500MHz 12pF±10% 31nH±10% 300mA 16Vdc 1000M ohm 50Vdc -55 to +125°C
Number of Circuits: 1
Continued on the following page.
2
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
2
Noise Suppression Products/EMI Suppression Filters > EMIFILr (LC Combined) > Multilayer Type
2011.11.2
oThis data sheet is applied for LC Combined CHIP EMIFILr used for General Electronics equipment for your design.
Continued from the preceding page.
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
