Note:
(1) Measured at 1.0MHz and applied reverse voltage of 4.0 volts
Symbols RL151 RL152 RL153 RL154 RL155 RL156 RL157 Units
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts
Maximum average forward rectified current
0.375" (9.5mm) lead length at TA=75 I(AV) 1.5 Amps
Peak forward surge current,
8.3mS single half sine-wave superimposed
on rated load (MIL-STD-750D 4066 method)
IFSM 60.0 Amps
Maximum instantaneous forward voltage at 1.5A DC VF1.0 Volts
Maximum DC reverse current TA=25
at rated DC blocking voltage TA=100 IR
5.0
50.0 A
Typical junction capacitance (Note 1) CJ20.0 F
Typical thermal resistance R JA 50.0 /W
Operating and storage temperature range TJ, TSTG -65 to +175
Features
RL151 THRU RL157
GENERAL PURPOSE PLASTIC RECTIFIER
Reverse Voltage - 50 to 1000 Volts
Forward Current - 1.5 Amperes
Maximum Ratings and Electrical Characteristics
1
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
DIMENSIONS
DIM
inches mm
Note
Min. Max. Min. Max.
A 0.228 0.299 5.8 7.6
B 0.102 0.142 2.6 3.6
C 0.028 0.034 0.71 0.86
D 1.000 - 25.40 -
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High surge current capability
1.5 ampere operation at TL=75 with no thermal runaway
Low reverse leakage
Construction utilizes void-free molded plastic technique
High temperature soldering guaranteed:
250 /10 seconds, 0.375 (9.5mm) lead length,
5 lbs. (2.3Kg) tension
Mechanical Data
Case: DO-15 molded plastic body
Terminals: Plated axial leads, solderable per
MIL-STD-750, method 2026
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.014 ounce, 0.39 gram
RATINGS AND CHARACTERISTIC CURVES
2
