BFC2 808 ..... www.vishay.com Vishay BCcomponents O 7.5 mm Film Dielectric Trimmers FEATURES * Housing diameter 7.5 mm * For a basic grid of 2.54 mm (0.1") or 2.50 mm * Top and bottom or top adjustment * Vertical and horizontal versions * Round head * Mounting: radial * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * Antennas * Impedance matching circuits * Medical * RF * For consumer and industrial equipment QUICK REFERENCE DATA Rated DC voltage 250 VDC Test DC voltage for 1 min 500 VDC Maximum contact resistance 10 m Minimum insulation resistance Category temperature range Climatic category (IEC 60068) 10 000 M PP -40 C to +70 C PE, PTFE, PET -40 C to +85 C PP 40/070/21 PE, PTFE, PET 40/085/21 Minimum storage temperature -55 C Related specification IEC 60418-1 and 4 Effective angle of rotation Operating torque Maximum axial thrust Capacitance range (Cmin. / Cmax.) Life of trimmer 180 (rotation in 180 only, see "Life of trimmer") Cmax. < 33 pF 1 mNm to 15 mNm Cmax. 33 pF 1 mNm to 25 mNm 2N 1.4 pF / 5.5 pF to 3 pF / 33 pF Maximum 10 cycles: rotation in 180 only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) Sampling and data evaluation for quality level in accordance with "MIL-STD-105D" and "IEC 60410": Quality level < 0.15 % major defects < 0.65 % minor defects Each capacitor is tested for minimum Cmax. and is also subjected to the full test voltage. Revision: 04-Aug-15 Document Number: 28527 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters ROUND HEAD O 2.5 0.6 0.7 O 2.5 0.6 0.7 10 (1) max. 10 max. 110 5 Z 4 0.5 Rotor (2 x) Z 0 5 - 0.1 4 0.5 Stator 1.15 max. 3 0.2 8 max. 4.5 0.2 4.5 0.2 7.6 0.1 8.6 7.6 0.1 max. 8.6 0.2 DETAIL Z turned 90 DETAIL Z turned 90 O 1.6 0.6 0.1 0.95 0.2 0.6 0.1 O 1.6 0.95 0.2 0.5 0.15 0.5 0.15 Trimmers BFC2 808 ..... series, vertical version Trimmers BFC2 808 ..... series, horizontal version 5.08 R 7.5 R R = Rotor, S = Stator 5.08 The large hole is for bottom adjustment and the diameter is determined by user's requirements. S R 2.5 R = Rotor, S = Stator 1.3 S R 1.3 Hole pattern ADJUSTMENT For top adjustment a screwdriver or trimming key can be used; for bottom adjustment a key is required as shown below. O3 0.6 + 0.2 0 + 0.1 0 O 1.7 + 0.1 0.7 0 2 min. Bottom adjustment key Revision: 04-Aug-15 Document Number: 28527 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents ORDERING INFORMATION CATALOG NUMBER BFC2 808 ..... VERTICAL VERSION Cmin. / Cmax. (pF) HORIZONTAL VERSION ROUND HEAD ROUND HEAD TOP AND BOTTOM ADJUSTMENT TOP ADJUSTMENT ONLY TOP AND BOTTOM ADJUSTMENT 1.4 / 5.5 11558 00004 51558 2/9 00018 - - 2 / 10 11109 00005 51109 2 / 10 - 11004 - 2 / 15 11159 - - 2 / 18 00016 - - 2.5 / 20 - 11006 - 2.5 / 22 11229 00006 51229 3 / 33 11339 - - MOUNTING The trimmer can be mounted on printed-circuit boards with a grid of 2.50 mm or 2.54 mm and a minimum hole diameter of 1.25 mm. PACKAGING Bulk packaged in cardboard boxes lined with expanded plastic. For smallest packaging quantity (SPQ) see "Electrical Data" table. ELECTRICAL DATA GUARANTEED MAX. Cmin. / MIN. Cmax. AT 200 kHz (pF) SPINDLE SHAPE OF HEAD ADJ. MODE Round Horizontal Round Top + bottom Vertical Round Top + bottom Vertical Round 2/9 2 / 10 DIEL. 1 MHz 100 MHz TEMP. COEFF. (10-6/K) MIN. fres AT Cmax. (MHz) COL. OF BASE Top + bottom Vertical 1.4 / 5.5 tan AT Cmax. x 10-4 Top CATALOG NUMBER BFC2 ... ..... 1400 .... 808 11558 PE 10 25 -250 350 850 Grey 1400 .... 808 00004 1200 .... 808 51558 PTFE 10 15 -150 800 400 Yellow 1400 .... 808 00018 PP 10 25 -250 800 480 Yellow 1400 .... 808 00005 Top + bottom Top SPQ 1400 .... 808 11109 Horizontal Round Top + bottom 2 / 15 Vertical Round Top + bottom PP 10 25 -250 600 450 Blue 1400 .... 808 11159 2 / 18 Vertical Round Top + bottom PTFE 10 15 -250 350 350 Green 1400 .... 808 00016 2.5 / 20 Vertical Round Top PET 160 - 0 1100 250 Green 1000 .... 808 11006 Vertical 2.5 / 22 Round Top + bottom Top Horizontal Round Top + bottom Vertical Round Top + bottom 3 / 33 Revision: 04-Aug-15 1200 .... 808 51109 1400 .... 808 11229 PP 10 25 -200 500 350 Green PP 10 - -250 350 300 Brown 1400 .... 808 11339 1400 .... 808 00006 1200 .... 808 51229 Document Number: 28527 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note "Soldering Guidelines for Film Capacitors": www.vishay.com/doc?28171 TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE REQUIREMENTS 4.2 Method of mounting Method A 14 Capacitance drift After TC measurement C/C: 1 % for Cmax. < 40 pF; C/C: 2.5 % for Cmax. 40 pF 19 Thrust Axial thrust of 2 N C/C: 0.3 % 21 Robustness of terminations: 21.1 Ua Tensile 1N No damage 21.2 Ub Bending 1 cycle No damage 22 Na Rapid change of temperature 1 cycle; 0.5 h at lower and 0.5 h at upper category temperature C/C: 2 % 23 T Soldering: Ta Solderability Solder bath immersion 3 mm; 235 C; 2 s Good wetting, no mechanical damage Tb Resistance to heat Solder bath: 260 C; 10 s No mechanical damage 24 Eb Impact bump 4000 10 bumps; 40 g; 6 ms C/C: 0.6 %; no mechanical damage 25 Fc Vibration Frequency 10 Hz to 55 Hz; amplitude 0.35 mm; 1.5 h C/C: 0.6 %; no mechanical damage 26 C/C: 4 % Climatic sequence: 26.1 B Dry heat 16 h at upper category temperature tan : 10 x 10-4 for Cmax. < 27 pF; tan : 70 x 10-4 for Cmax. 27 pF; tan : 80 x 10-4 for Cmax. 40 pF Rins.: 10 000 M; rotor contact R: 10 m 26.2 D Damp heat accelerated, first cycle 1 cycle; 24 h; +40 C; 95 % to 100 % RH Voltage proof: 500 V for 1 min 26.3 Aa Cold 16 h; -40 C Visual examination: no mechanical damage Damp heat accelerated, remaining cycles 1 cycle; 24 h; +40 C; 95 % to 100 % RH Operating torque: 1 mNm to 15 mNm for Cmax. < 33 pF; 1 mNm to 25 mNm for Cmax. 33 pF 26.5 Revision: 04-Aug-15 Document Number: 28527 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE IEC 60068 TEST METHOD 27 Ca 29 Revision: 04-Aug-15 TEST PROCEDURE REQUIREMENTS Damp heat steady state 21 days; +40 C; 90 % to 95 % RH C/C: 5 % tan : 30 x 10-4 for Cmax. < 27 pF; tan : 70 x 10-4 for Cmax. 27 pF; tan : 80 x 10-4 for Cmax. 40 pF Rins.: 10 000 M; rotor contact R: 10 m Voltage proof: 500 V for 1 min Visual examination: no mechanical damage Operating torque: 1 mNm to 15 mNm for Cmax. < 33 pF; 1 mNm to 25 mNm for Cmax. 33 pF Mechanical endurance 10 cycles Maximum 10 cycles: rotation in 180 only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) C/C: 1.5 % C/C after axial thrust: 0.3 %; rotor contact R: 10 m Voltage proof: 500 V for 1 min Visual examination: no mechanical damage Operating torque: 1 mNm to 15 mNm for Cmax. < 33 pF; 1 mNm to 25 mNm for Cmax. 33 pF Document Number: 28527 5 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BFC280800016 BFC280811509 BFC280851279 BFC280800018 BFC280811339 BFC280811279 BFC280811409 BFC280811109 BFC280811229 BFC280811558