57701481 - EATON CUTLER HAMMER

Specific Control & Display Products

Product Focus

Monitoring, Measurement,

Control & Display

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers 1

Description Page

Totalizers

Product Family Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Electromechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Electronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Count Controls/Preset Counters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Tachometers/Ratemeters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Digital Panel Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Timers/Hour Meters

Product Family Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Electronic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Electromechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Time Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Flow Totalizers, Transmitters and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Special Function Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Fusion® Integrated Machine Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Accessories and Encoders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Dimensions, Weights and Ratings

Dimensions, weights and ratings given in this Product Guide are approximate and

should not be used for construction purposes. Drawings giving exact dimensions

are available upon request. All listed product speciﬁcations and ratings are subject

to change without notice. Photographs are representative of production units.

Terms and Conditions

All orders accepted by Eaton are subject to the general terms and conditions as set

forth in Sellers Policy 25-000.

Other Cutler-Hammer® Products

Eaton’s electrical business is a leader in the development and manufacturing of

power distribution equipment, electrical control products and advanced industrial

automation solutions.

For more information on Cutler-Hammer products and services, visit our Web site at

www.eaton.com.

WARNING

The installation and use of Cutler-Hammer products should be in accordance with

the provisions of the U.S. National Electrical Code and/or other local codes or

industry standards that are pertinent to the particular end use. Installation or use

not in accordance with these codes and standards could be hazardous to

personnel and/or equipment.

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Totalizers

Product Family Overview

Introduction

Totalizers are used in a wide variety of applications where

accurate totals are needed. Typical applications include

counting the number of parts produced, amount of material

used, or the number of machine cycles occurring. Totalizers

are the simplest and most common type of counter. As an

added bonus, some models can perform both totalizing and

ratemeter functions.

Application Example

Parts are fed into a machine or process, an operation is

performed, and the ﬁnished parts exit the machine or

process. The subtract totalizer is used to indicate the number

of parts in process.

Totalizer Product Family Overview

Table 1. Product Family Overview

RST

T / R Durant

Limit Switch

Finished Parts

Manufacturing

Process

Raw Parts

Application Example

Product Family Characteristics Typical Applications Panel Cutout

in Inches (mm)

Page

Number

■Non-replaceable battery (min. 8-yr. life)

■Compact, low cost and high efﬁciency

■8-Digit LCD totalizers

■Manual or electrical reset

■Various counting modes/inputs

■Replacement for mechanical counters

■Transaction counting

■Parts counting

■Position indication or measurement

0.870 x 1.772

(22 x 44)

■Compact device with bright, LED display

■Multiple functions available: count, time,

rate, multifunction, double-function

■24V DC Power

■Count, measure, time where small package

and easy-to-read display required

■Position display

■Motor/pulley RPM

0.870 x 1.772

(22 x 44)

■Economical, multifunction display

■Large, LED characters

■AC or DC power options

■Large, easy-to-read display

■Position display

■Motor/pulley RPM

1.772 x 1.622

(45 x 92)

■Replaceable lithium battery

■8-digit, high-visibility LCD display

■Optional backlighting

■Various input options available

■Portable/mobile/remote ﬂow monitoring

(e.g. sewer pumping, pesticide application)

■Position display, RPM

■Length measurement (e.g. carpet, cable)

1.299 x 2.677

(33 x 68)

■6-digit, super bright LED display

■Multiple models available: totalizers,

ratemeters, count controls, digital panel

meters and ﬂow controls

■Length measurement and control

■Flow monitoring and control

■Process monitoring and display

■Voltage and current monitoring and display

1.772 x 1.622

(45 x 92)

■8-digit, high-visibility, 2-line LCD display

■User-conﬁgurable control inputs

■Highly ﬂexible control/display

■Flow control where simultaneous total and

rate display are required

■Cut-to-length and other simple processes

where ﬂexibility of inputs/outputs required

2.667 x 2.667

(68 x 68)

■Bright LED display w/14 mm characters

■Simple conﬁguration with 14-button tactile

keypad

■Many different versions ﬁt almost any

application

■Cut-to-length machinery with batching

■Parts batching/palletizing

■Die press positioning control

■Applications where parameter changes are

required

2.667 x 5.433

(68 x 138)

■Various price, voltage and size ranges for

different duty cycles and environments

■Long life and always readable display

■Coin-operated equipment

■Gaming machines

■Printing presses

■Secondary machines (e.g. punch press)

Various

Mounting

Conﬁgurations

■Various size ranges for different duty cycles

and environments

■No power supply needed

■Long life and always readable display

■Winding and spooling equipment

■Position display

■Mechanical piece/cycle counting

Various

Mounting

Conﬁgurations

E5-024-C

E5-_24-E

E5-496-E

Courier

Eclipse

Ambassador

President

Electromechanical

Mechanical

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Stroke

X Series/Pushbutton Desk Tally — Durant®

Contents

Description Page

Mechanical Totalizers — Stroke

X Series/Pushbutton

Desk Tally . . . . . . . . . . . . 3

CS Series . . . . . . . . . . . . . . 4

H Series . . . . . . . . . . . . . . . 5

D Series . . . . . . . . . . . . . . . 6

Product Description

Model X Series is a dustproof and

rustproof series of counters for light and

medium-duty work. They are sound and

durable, requiring a minimum of driving

effort, and have been especially

designed for incorporation as integral

parts of a variety of machines and

equipment.

Pushbutton Desk Tally

Ruggedly constructed counters with

feather-touch pushbutton operation

and maximum readability. Speciﬁca-

tions and dimensions are basically the

same as the X Series counters. Will

give long and accurate service in areas

requiring hand counting or during

hand operations.

Cat. No. 5-X-1-1-R

Technical Data and Speciﬁcations

■Figures: 4 or 5

■Speed: 1000 cpm

■Shaft: 0.125" (3.2 mm) diameter

stainless steel

■Drive: Drive parts of nylon

■Bearings: Oil-less, maintenance free

■Finish: Black frame and Cycolac

black cover

■Stroke Operation: 33° minimum;

58° maximum



■Figure Size: 3/16 inch (4.8 mm) high,

white-on-black background

■Reset: Knob

Operating stroke angles apply to forward

stroke counter only. Check factory for angles

of reverse stroke counter.

Product Selection

Table 2. Product Selection — X Series Stroke Counters and Pushbutton Desk Tallies

Reverse stroke.

When Ordering Specify

To determine a model number from the Product Selection table for Model X Series

Stroke Counters and Pushbutton Desk Tallies, consider:

■Number of ﬁgures

■Drive

Dimensions

Figure 1. X Series — Approximate Dimensions in Inches (mm)

Table 3. X Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Reset Mounting Catalog

Number

Order

Number *

L.H. Lever

R.H. Lever

Knob

Base

4-X-1-1-L

5-X-1-1-L

4-X-1-1-R

40263400

40272401

40263401

R.H. Lever

L.H. Lever

R.H. Lever

Knob

Base

5-X-1-1-R

4-X-1-1-L-REV



4-X-1-1-R-REV



40272402

40263403

40263402

L.H. Lever

R.H. Lever

Push Bar

Pushbutton

Knob

Base

5-X-1-1-L-REV



5-X-1-1-R-REV



4-X-2

4-X-2-A

40272400

40272403

21619400

33245400

Model A B C D

4-X-1-1_ 1.86 (47.2) 2.76 (70.2) 0.62 (15.7) 0.89 (22.6)

5-X-1-1_ 2.16 (54.8) 3.06 (77.8) 0.81 (20.6) 0.95 (24.1)

Pre

Stroke

0.12

(3.2)

0.97

(24.6)

1.20

(30.6)

1.44

(36.5)

0.44 (11.1)

0.53 (13.5) Dia. 0.093

(2.36)

0.89

(22.6)

12° ±5°

0.14

(3.6)

1.38 (35.1)

Total Stroke

58° ±5°

45° ±5°

Index Stroke

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Stroke

CS Series — Durant®

Product Description

Model CS Series of small, compact, top

reading stroke counters is designed for

use in most industrial applications.

These counters are ruggedly built and

feature a single casting case, which

assures great rigidity and a tight seal for

working parts.

Technical Data and

Speciﬁcations

■Figures: 4 or 5

■Speed: 600 cpm

■Stroke Operation: 37-1/2° minimum;

75° maximum

■Shaft: 0.25" (6.4 mm) diameter stain-

less steel, rustproof

■Drive: Accurately machined, hard-

ened steel parts

■Bearings; Oil-less, maintenance free

■Figure Size: 11/32" (8.7 mm) high,

black-on-white background

■Reset: Contoured wing nut

■Finish: Black frame

■Operating Lever; Cast zinc.

Adjustable to any position.

Furnished complete with pull

spring.

Cat. No. 4-CS-1-1-R

Product Selection

Table 4. Product Selection — CS Series Stroke Counters

Special Feature: Rustproof.

When Ordering Specify

To determine a model number from the Product Selection table for Model CS

Series Stroke Counters, consider:

■Number of ﬁgures ■Drive lever

Dimensions

Figure 2. CS Series — Approximate Dimensions in Inches (mm)

Table 5. CS Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Reset Mounting Catalog

Number

Order

Number *

R.H. Lever

Wing Nut

Base

4-CS-1-1-R

5-CS-1-1-R

31062400

31062401

L.H. Lever

R.H. Lever

L.H. Lever

Wing Nut

Base

5-CS-1-1-L

5-CS-1-1-R-RP 

5-CS-1-1-L-RP 

31061401

01464400

00445400

Model A B C D

4-CS-1_ 3.12 (79.2) 3.50 (88.9) 4.03 (102.3) 1.87 (47.6)

5-CS-1_ 3.62 (91.9) 4.00 (101.6) 4.53 (115.0) 2.38 (60.5)

0.47

(11.9)

Dia. 0.156

4 Mtg. Holes

D0.73

(18.6)

0.42

(10.7)

0.92

(23.4)

0.50 (12.7)

1.19

(30.2)

1.00

(25.4)

Dia. 0.25

(6.35)

Stroke

37.5° Min. – 75° Max.

1.34

(34.1)

2.09

(53.1)

0.56

(14.3)

1.69 (42.9)

1.25

(31.8)

0.22

(5.6)

1.25

(31.8)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Stroke

H Series — Durant®

Product Description

Model H Series heavy-duty counters

are designed for hard usage and long,

trouble-free service. They are high-

speed, streamlined counters

constructed of the highest quality

materials and drive shaft moves in oil-

less bearings. All shafts are stainless

steel. The drive action is designed with

overstroke so counter does not bottom,

increasing life and permitting easier

installation. The sturdy cover is stamped

steel, locked into position on a heavy,

die-cast base of a special alloy. A heavy

steel mounting plate is adjustable for

either bottom or back mounting. Model

“H” has earned the reputation of being

the “work horse” of industrial counters.

Wing nut or tamper-proof reset lock

which requires a key to reset the

counter, guarding against unauthorized

resetting or tampering.

Technical Data and

Speciﬁcations

■Figures: 5

■Speed: 800 cpm

■Stroke Operation: 37° stroke to

count; 60° maximum stroke

■Shaft: 0.31" (7.9 mm) diameter stain-

less steel, rustproof

■Drive: Accurately machined, hard-

ened steel parts; Geneva drive for

extra long life

■Bearings: Oil-less, maintenance free

■Figure Sizes; 11/32" (8.7 mm) high,

black-on-white background

■Reset: Wing nut or tumbler lock

reset

■Finish: Black frame and cover

■Operating Lever: Adjustable to any

position. Furnished complete with

pull spring for attaching.

Cat. No. 5-H-1-1-R

Product Selection

Table 6. Product Selection — H Series Stroke Counters

Special Feature: Reverse stroke.

Special Feature: Rustproof.

When Ordering Specify

To determine a model number from the Product Selection table for Model H Series

Stroke Counters, consider:

■Number of ﬁgures

■

Drive lever location (left or right side)

■Type of reset (lock or wing nut)

Figure 3. Direction Location for 5H5 and 5H6

Dimensions

Figure 4. H Series — Approximate Dimensions in Inches (mm)

Table 7. H Series — Approximate Dimensions

in Inches (mm)

No. of

Figures

Drive Reset Mounting Catalog

Number

Order

Number *

R.H. Lever

L.H. Lever

R.H. Lever

L.H. Lever

Wing Nut

Base

5-H-1-1-R

5-H-1-1-L

5-H-1-1-R-REV 

5-H-1-1-L-REV 

40205400

40205401

00597400

00598400

R.H. Lever

L.H. Lever

R.H. Lever

L.H. Lever

Wing Nut

Lock Reset

Base

5-H-1-1-R-RP 

5-H-1-1-L-RP 

5-H-1-2-R

5-H-1-2-L

40205404

40205405

40206404

40206405

R.H. Lever

L.H. Lever

Lock Reset

Wing Nut

Base

Rear

5-H-1-2-R-RP 

5-H-1-2-L-RP 

5-H-1-4-R

5-H-1-4-L

40206400

40206401

00507400

00508400

R.H. Trip Arm

L.H. Trip Arm

Wing Nut

Base

5-H-5-A

5-H-5-B

5-H-5-C

5-H-5-D

31049400

31049401

31049402

31049403

R.H. Trip Arm

L.H. Trip Arm

Lock Reset

Base

5-H-6-A

5-H-6-B

5-H-6-C

5-H-6-D

01533400

01534400

01535400

01536400

1.20

(30.6) C0.98

(25.0)

1.12

(28.4)

Dia. 0.31

(7.92)

2.25 (57.2)

0.91

(23.0)

1.0

(25.4)

0.75

(19.1)

0.75

(19.1)

1.80

(45.7)

2.76

(70.1)

Lock Reset

Wing

Nut

Reset

Model A B C

5 Figure Units 3.95

(100.4)

4.38

(111.3)

2.75

(69.9)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Stroke

D Series — Durant®

Product Description

Model D Series are medium-duty stroke

counters available with 4, 5 or 6 ﬁgures

that have been designed for general

service on small production machines.

Although compact, Durant

“D” models

are sturdily constructed and thoroughly

tested for accuracy and efﬁcient

operation.

Technical Data and

Speciﬁcations

■Figures: 4, 5 and 6

■Speed: 400 cpm

■Shaft: 0.25" (6.4 mm) diameter stain-

less steel, rustproof

■Drive: Nylon rachet and Delrin drive

plate. Right-hand drive standard;

left-hand drive available

■Bearings: Oil-less, maintenance free

■Figure Size: 1/4" (6.4 mm) high,

black-on-white background

■Reset: Wing nut

■Finish: Black frame and cover

■Operating lever: Adjustable to any

position. Furnished complete with

pull string

Cat. No. 5-D-1-1-R

Product Selection

Table 8. Product Selection — D Series Stroke Counters

When Ordering Specify

To determine a model number from the Product Selection table for Model D Series

Stroke Counters, consider:

■Number of ﬁgures ■Drive lever

Dimensions

Figure 5. D Series — Approximate Dimensions in Inches (mm)

Table 9. D Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Reset Mounting Catalog

Number

Order

Number *

R.H. Lever

Wing Nut

Base

4-D-1-1-R

5-D-1-1-R

6-D-1-1-R

34269401

34269402

34269403

L.H. Lever

Wing Nut

Base

4-D-1-1-L

5-D-1-1-L

6-D-1-1-L

34269405

34269406

34269407

Model A B C

4-D-1-1_ 1.59 (40.4) 2.20 (55.9) 1.20 (30.6)

5-D-1-1_ 1.92 (48.8) 2.53 (64.3) 1.51 (38.5)

6-D-1-1_ 2.26 (57.5) 2.87 (73.0) 1.83 (46.4)

C 0.62 (15.7)

0.50

(12.7) B

Dia. 0.12

(3.05)

4 Mtg.

Holes

1.72

(43.6)

1.25

(31.8)

1.62 (41.3)

1.87 (47.6)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

X Series — Durant®

Contents

Description Page

Mechanical Totalizers — Revolution

X Series . . . . . . . . . . . . . . . 7

CS Series . . . . . . . . . . . . . . 8

D-7 Series . . . . . . . . . . . . . 9

D-6 Series . . . . . . . . . . . . . 10

HDW Series . . . . . . . . . . . . 11

T Series . . . . . . . . . . . . . . . 12

H Series . . . . . . . . . . . . . . . 13

Product Description

Model X Series are dust- and rust-proof

counters designed for small, medium-

duty units, accurate, durable and require

a minimum of driving effort. They are

especially designed for incorporation as

integral parts of a variety of equipment

that gets severe usage under adverse

climatic conditions.

Technical Data and

Speciﬁcations

■Figures: 4 or 5

■Speed —

❑1000 cpm in 1:1 ratio;

❑10,000 cpm in 10:1 ratio for inter-

mittent duty

■Rotation Direction: Clockwise or

anti-clockwise when viewed from

right-hand end of counter

■Ratio —

❑1:1 and 10:1 standard in 4-X-7

models

❑10:1 standard in 5-X-7 models

■Shaft: 0.125" (3.2 mm) diameter

stainless steel; standard length 0.44"

(11.1 mm)

■Bearings: Oil-less, maintenance free

■Figure Size: 3/16 inch (4.8 mm) high,

white-on-black background

■Reset: Knob

■Finish: Black frame, Cycolac black

cover

■Drive: Right- or left-hand drive; drive

parts of Delrin

■Ratio Information: 1:1 is one count

to each revolution of drive shaft,

10:1 is ten counts to each revolution

Cat. No. 5-X-7-1-L-CL

Product Selection

Table 10. Product Selection — X Series Revolution Counters

Special Feature: 10:1 ratio.

Figure 6. Top View — Right-Hand Drive Figure 7. Top View — Left-Hand Drive

Note: When shaft is turned in the reverse direction of rotation, the counter will subtract.

When Ordering Specify

To determine a model number from the Product Selection table for Model X Series

Revolution Counters, consider:

■Number of ﬁgures

■Ratio

■Drive shaft location

■Shaft rotation direction

Dimensions

Figure 8. X Series — Approximate Dimensions in Inches (mm)

Table 11. X Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Rotation Reset

Mounting

Catalog

Number

Order

Number *

L.H.

Clockwise 

Anti-Clockwise 

Knob

Base

4-X-7-1-L-CL

5-X-7-1-L-CL

4-X-7-1-L-AC

5-X-7-1-L-AC

40270406

40275404

40270404

40275407

R.H.

Clockwise 

Anti-Clockwise 

Knob

Base

4-X-7-1-R-CL

5-X-7-1-R-CL

4-X-7-1-R-AC

5-X-7-1-R-AC

40270407

40275405

40270405

40275406

L.H.

Clockwise 

Anti-Clockwise 

Knob

Base

4-X-7-1-L-CL 

5-X-7-1-L-CL 

4-X-7-1-L-AC 

5-X-7-1-L-AC 

40270402

40275402

40270400

40275400

R.H.

Clockwise 

Anti-Clockwise 

Knob

Base

4-X-7-1-R-CL 

5-X-7-1-R-CL 

4-X-7-1-R-AC 

5-X-7-1-R-AC 

40270403

40275403

40270401

40275401

Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation





Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation





Model A B C D E

4-X-7-1_ 1.86 (47.2) 2.76 (70.2) 0.62 (15.7) 0.19 (4.8)

0.89 (22.6)

5-X-7-1_ 2.16 (54.8) 3.06 (77.8) 0.81 (20.6) 0.25 (6.4)

0.95 (24.1)

0.12

(3.2)

Dia. 0.12

(3.2)

0.97

(24.6)

1.20

(30.6)

1.44

(36.5)

0.14

(3.6)

1.38 (35.1)

0.45

(11.5)

0.44 (11.1)

0.53 (13.5)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

CS Series — Durant®

Product Description

Model CS Series top reading revolution

counters are designed for use in most

industrial applications. The entire case is

a single casting. This provides greater

rigidity, tighter seal of working parts and

more streamlined contour. The unit is

compact, rugged and features a ﬂush

mounted window to assure greater

visibility.

Technical Data and

Speciﬁcations

■Figures: 4 or 5

■Speed: 600 cpm in 1:1 ratio

■Rotation Direction: Clockwise or

anti-clockwise when viewed from

right-hand end of counter

■Ratio: 1:1 standard

■Shaft: 0.25" (6.4 mm) diameter

stainless steel; standard length

1" (25.4 mm)

■Drive: Spur gear

■Bearings: Oil-less, maintenance free

■Figure Size: 11/32 inch (8.7 mm)

high, black-on-white background

■Reset: Contoured wing nut

■Finish: Black frame

Table 12. X Series — Approximate

Dimensions in Inches (mm)

Model A B C D

4-CS-7_ 3.12

(79.2)

3.50

(88.9)

4.03

(102.3)

1.89

(47.9)

5-CS-7_ 3.62

(91.9)

4.00

(101.6)

4.53

(115.0)

2.38

(60.5)

Cat. No. 5-CS-7-1-R-CL

Product Selection

Table 13. Product Selection — CS Series Revolution Counters

Special Feature: 10:1 ratio.

Special Feature: 10:1 ratio, non-reset, double shaft.

Figure 9. Top View — Right-Hand Drive

Figure 10. Top View — R.H. and L.H. Drive

Figure 11. Top View — Right-Hand Drive

Figure 12. Top View — R.H. and L.H. Drive

Note: When shaft is turned in the reverse direction of rotation, the counter will subtract.

When Ordering Specify

To determine a model number from the Product Selection table for Model CS

Series Revolution Counters, consider:

■Number of ﬁgures

■Ratio

■Drive shaft location

■Shaft rotation direction

Dimensions

Figure 13. CS Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Rotation Reset

Mounting

Catalog

Number

Order

Number *

L.H.

R.H.

L.H.

R.H.

Clockwise

Clockwise 

Anti-Clockwise

Anti-Clockwise 

Wing Nut

Base

5-CS-7-1-L-CL

5-CS-7-1-R-CL

5-CS-7-1-L-AC

5-CS-7-1-R-AC

31060408

31060409

31060410

31060411

L.H.

R.H.

L.H.

R.H.

Clockwise

Clockwise 

Anti-Clockwise

Anti-Clockwise 

Wing Nut

Base

5-CS-7-1-L-CL 

4-CS-7-1-R-CL 

5-CS-7-1-R-CL 

5-CS-7-1-L-AC 

4-CS-7-1-R-AC 

00440400

31057401

00441400

00442400

31057403

R.H.

R.H. & L.H.

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Wing Nut

None

Base

5-CS-7-1-R-AC 

4-CS-7-3-CL 

4-CS-7-3-AC 

5-CS-7-3-CL 

5-CS-7-3-AC 

00443400

31057408

31057409

31057410

31057411

Clockwise Shaft Rotation



Clockwise Shaft Rotation



Anti-clockwise Shaft Rotation



Anti-clockwise Shaft Rotation



Dia. 0.156 (3.96)

4 Mtg. Holes D

0.73

(18.6)

0.42

(10.7)

0.92 (23.4)

0.50 (12.7)

C1.00

(25.4)

1.19

(30.2)

Dia. 0.25

(6.4)

1.69 (42.9)

1.25

(31.8)

0.22

(5.6)

0.56

(14.3)

1.34

(34.1)

2.09

(53.1)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

D-7 Series — Durant®

Product Description

Model D-7 Series spur gear end drive

units are compact counters that meet a

variety of needs. Accurate, dependable

and moderately prices, they are

especially recommended for braiding

machines, low-speed coil winders, wire

measuring equipment and all medium-

duty revolution applications.

Technical Data and

Speciﬁcations

■Figures: 5 standard

■Speed: Up to 800 cpm in 1:1 ratio

■Rotation Direction: Clockwise or

anti-clockwise when viewed from

right-hand end of counter

■Ratio: 1:1 standard

■Shaft: 0.31" (7.9 mm) diameter

stainless steel; 0.66" (16.7 mm)

right-hand drive, 0.63" (15.9 mm)

left-hand drive

■Drive: Right- or left-hand spur gear

drive

■Bearings: Oil-less, maintenance free

■Figure Size: 1/4 inch (6.4 mm) high,

black-on-white background

■Finish: Black frame and cover

■Reset: Wing nut or non-reset

Cat. No. 5-D-7-1-L-CL

Product Selection

Table 14. Product Selection — D-7 Series Revolution Counters

Figure 14. Top View — Right-Hand Drive Figure 15. Top View — Left-Hand Drive

Note: When shaft is turned in the reverse direction of rotation, the counter will subtract.

When Ordering Specify

To determine a model number from the Product Selection table for Model D-7

Series Revolution Counters, consider:

■Number of ﬁgures

■Shaft drive

■Shaft rotation direction

■Reset or Non-reset

Dimensions

Figure 16. D-7 Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Rotation Reset Mounting Catalog

Number

Order

Number *

L.H.

R.H.

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Wing Nut

Base

5-D-7-1-L-CL

5-D-7-1-L-AC

5-D-7-1-R-CL

5-D-7-1-R-AC

31127408

31127405

31127431

31127400

L.H.

R.H.

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

None

Base

5-D-7-3-L-CL

5-D-7-3-L-AC

5-D-7-3-R-CL

5-D-7-3-R-AC

31127416

31127412

31127438

31127442

Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation





Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation





1.62 (41.3)

1.72

(43.6)

Dia. 0.120

(3.05)

4 Mtg.

Holes

1.17

(29.8)

0.50

(12.7)

Dia. 0.31

(7.9)

0.12

(3.2)

0.75

(19.0)

1.51

(38.5)

0.50

(12.7) 2.53 (64.3)

1.92 (48.8)

0.78

(19.8)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

D-6 Series — Durant®

Product Description

Model D-6 right-angle worm drive

counters are ruggedly designed for high

speeds on light duty applications. Small

“D” counters are easily adapted as

accessory equipment on machinery

where right-angle drive is desired to

permit full view reading of the counter.

Technical Data and

Speciﬁcations

■Figures: 5

■Speed: Up to 1500 cpm in 1:1 ratio

■Rotation Direction: Clockwise or

anti-clockwise when viewed from

right-hand end of counter

■Ratio: 1:1 standard

■Shaft: 0.31" (7.9 mm) diameter stain-

less steel; 1.25" (31.8 mm) length

standard

■Drive: Worm drive

■Bearings: Oil-less, maintenance free

■Figure Size: 1/4" (6.4 mm) high,

black-on-white background

■Finish: Black frame and cover

■Reset: Wing nut

Cat. No. 5-D-6-1-AC

Product Selection

Table 15. Product Selection — D-6 Series Revolution Counters

Special Feature: Measuring wheels and brackets available for lineal measurement in Feet.

Special Feature: Measuring wheels and brackets available for lineal measurement in Yards

and 1/8ths.

Special Feature: Measuring wheels and brackets available for lineal measurement in Yards.

Figure 17. Top View of Counter Figure 18. Top View of Counter

Note: When shaft is turned in the reverse direction of rotation, the counter will subtract.

When Ordering Specify

To determine a model number from the Product Selection table for Model D-6

Series Revolution Counters, consider:

■Shaft rotation direction

Dimensions

Figure 19. D-6 Series — Approximate Dimensions in Inches (mm)

A = 1.85 (46.9) for 6 ﬁgures and 1.53 (38.9) for 5 ﬁgures.

No. of

Figures

Drive Rotation Reset Mounting Catalog

Number

Order

Number

Front & Rear

Anti-Clockwise



Anti-Clockwise



Clockwise



Clockwise



Wing Nut

Base

5-D-6-1-AC

6-D-6-1-AC

5-D-6-1-CL

6-D-6-1-CL

31052401

31052402

31052404

31052405

Front & Rear

Anti-Clockwise



Anti-Clockwise



Clockwise



Clockwise



Wing Nut

Base

5-D-8-1-AC 

6-D-8-1-AC 

5-D-8-1-CL 

6-D-8-1-CL 

40187401

40187402

40187417

40187418

Front & Rear

Clockwise



Anti-Clockwise



Clockwise



Anti-Clockwise



Wing Nut

Base

5-D-9-1-CL 

5-D-9-1-AC 

5-D-90-1-CL 

5-D-90-1-AC 

40187404

40187410

40187414

40187408

Clockwise Shaft Rotation



Anti-clockwise Shaft Rotation



Reading

Line

0.50 (12.7) 0.66 (16.7)

3.19 (81.0)

2.81 (71.4)

A0.84

(21.4)

0.34

(8.7)

0.12

(3.0)

2.0

(50.8)

0.75

(19.0)

Dia. 0.31

(7.93)

1.16

(29.4)

1.23

(31.4)

3.62 (92.1)

2.00 (50.8)

1.62

(41.3)

Dia. 0.144

(3.66)

4 Mtg.

Holes



Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

HDW Series — Durant®

Product Description

Model HDW Series are high speed, end

drive revolution counters that have the

rugged features of all Durant “H”

counters, with the addition of double

worm drive that produces speeds up to

2000 cpm. Lightweight precision

molded wheels reduce centrifugal force

and eliminate slipping. They are

particularly recommended for quick

starting and stopping machines, such as

coil winders and wire measuring or

reeling equipment and on applications

where continuous high speed

measuring is required.

Technical Data and

Speciﬁcations

■Figures: 5

■Speed: Up to 2000 cpm

■Rotation Direction: Clockwise or

anti-clockwise when viewed from

right-hand end of counter

■Ratio: 1:1 only

■Shaft: 0.31" (7.9 mm) diameter

stainless steel; standard length

2" (50.8 mm)

■Drive: Right- or left-hand drive

■Bearings: Oil-less, maintenance free

■Figure Size: 11/16 inch (17.5 mm)

high, white-on-black background

■Reset: Wing nut or tumbler lock

reset

■Finish: Black frame and cover

HDW Series Revolution Counter

Product Selection

Table 16. Product Selection — HDW Series Revolution Counters

Mounting plate is adjustable for base or back mounting.

Figure 20. Top View — Right-Hand Drive Figure 21. Top View — Left-Hand Drive

Note: When shaft is turned in the reverse direction of rotation, the counter will subtract.

When Ordering Specify

To determine a model number from the Product Selection table for Model HDW

Series Revolution Counters, consider:

■Shaft drive ■Shaft rotation direction

Dimensions

Figure 22. HDW Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Rotation Reset Mounting



Catalog

Number

Order

Number *

R.H.

L.H.

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Wing Nut

Base

5-HDW-7-1-R-CL

5-HDW-7-1-R-AC

5-HDW-7-1-L-CL

5-HDW-7-1-L-AC

31050400

31050401

31050402

31050403





Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation

Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation





0.96 (24.4)

0.90

(22.9)

1.80

(45.7)

2.76

(70.1)

Dia. 0.312

(7.9)

2.00

(50.8)

0.98

(25.0)

2.75

(69.9)

Dia. 0.22 (5.59)

4 Mtg. Holes

0.75

(19.1)

4.51

(100.3)

4.94

(111.3)

0.34

(8.5)

1.12

(28.4)

2.25

(57.2)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

T Series — Durant®

Product Description

Model T Series worm drive revolution

counters are sturdy, high speed

instruments used on many heavy

machines, engines or motors. Variety of

drive permits direct connection. Suitable

for panel mounting.

Technical Data and

Speciﬁcations

■Figures: 5 standard

■Speed: 1500 cpm in 1:1 ratio

■Rotation Direction: Clockwise or

anti-clockwise determined top look-

ing down

■Ratio: 1:1 standard

■Shaft: 0.31" (7.9 mm) diameter

stainless steel; standard extends

2" (50.8 mm) top and bottom

■Drive: Hobbed steel and bronze

worm gearing; subtracts when

reversed

■Bearings: Oil-less, maintenance free

■Figure Size: 11/32 inch (8.7 mm)

high, black-on-white background

■Reset: Left-hand wing nut standard

■Finish: Black frame and face plate

Cat. No. 5T61CL

Product Selection

Table 17. Product Selection — T Series Revolution Counters

Special Feature: Measuring wheels and brackets available for lineal measurement in Feet.

Special Feature: Measuring wheels and brackets available for lineal measurement in Yards

and 1/8ths.

Special Feature: Measuring wheels and brackets available for lineal measurement in Yards.

Figure 23. Top View of Counter Figure 24. Top View of Counter

Note: When shaft is turned in the reverse direction of rotation, the counter will subtract.

When Ordering Specify

To determine a model number from the Product Selection table for Model T Series

Revolution Counters, consider:

■Shaft rotation direction

Dimensions

Figure 25. T Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Rotation Reset Mounting Catalog

Number

Order

Number *

Top & Bottom

Clockwise



Anti-Clockwise



Clockwise



Anti-Clockwise



Wing Nut

Back

5T61CL

5T61AC

5T81CL 

5T81AC 

40342400

40342401

40179402

40179403

Top & Bottom

Clockwise



Anti-Clockwise



Clockwise



Anti-Clockwise



Wing Nut

Back

5T91CL 

5T91AC 

5T901CL 

5T901AC 

40179408

40179409

40179406

40179407

Clockwise Shaft Rotation



Anti-clockwise Shaft Rotation



1/4-20 UNC-2B

4 Mtg. Holes

5.00 (127.0)

0.75

(19.1)

0.47

(11.9)

2.97 (75.4)

1.36 (34.5)

2.38

(60.5)

0.24

(6.2)

1.41

(35.7)

1.38

(35.1)

0.62

(15.9)

1.87

(47.6)

0.25

(6.4)

2.19

(55.6)

4.50 (114.2)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

H Series — Durant®

Product Description

Model H Series are heavy-duty, end

drive revolution counters designed for

industrial use; suitable for speeds up to

800 cpm. They are available with either

right- or left-hand drive, and with wing

nut reset.

Technical Data and

Speciﬁcations

■Figures: 5

■Speed: Up to 800 cpm in 1:1 ratio

■Rotation Direction: Clockwise or

anti-clockwise when viewed from

right-hand end of counter

■Ratio: 1:1 standard

■Shaft: 0.31" (7.9 mm) diameter

stainless steel; standard length

2" (50.8 mm)

■Drive: Right- or left-hand drive

■Bearings: Oil-less, maintenance free

■Figure Size: 11/32 inch (8.7 mm)

high, white-on-black background

■Reset: Wing nut

■Finish: Black frame and cover

Cat. No. 5-H-7-1-R-CL

Product Selection

Table 18. Product Selection — H Series Revolution Counters

Mounting plate is adjustable for base or back mounting.

Special Feature: Measuring wheels and brackets available for lineal measurement in Feet.

Special Feature: Measuring wheels and brackets available for lineal measurement in Yards

and 1/8ths.

Special Feature: Measuring wheels and brackets available for lineal measurement in Yards.

Figure 26. Top View — Right-Hand Drive

Figure 27. Top View — R.H. and L.H. Drive

Figure 28. Top View — Left-Hand Drive

Figure 29. Top View — R.H. and L.H. Drive

Note: When shaft is turned in the reverse direction of rotation, the counter will subtract.

When Ordering Specify

To determine a model number from the Product Selection table for Model H Series

Revolution Counters, consider:

■Drive shaft location ■Shaft rotation direction

No. of

Figures

Drive Rotation Reset Mounting



Catalog

Number

Order

Number *

L.H.

R.H.

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Wing Nut

Base

5-H-7-1-L-CL

5-H-7-1-L-AC

5-H-7-1-R-CL

5-H-7-1-R-AC

00509400

00510400

00513400

00514400

L.H.

R.H.

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Wing Nut

Base

5-H-8-1-L-CL 

5-H-8-1-L-AC 

5-H-8-1-R-CL 

5-H-8-1-R-AC 

00601400

00602400

00605400

00606400

L.H.

R.H.

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Wing Nut

Base

5-H-9-1-L-CL 

5-H-9-1-L-AC 

5-H-9-1-R-CL 

5-H-9-1-R-AC 

00619400

00620400

00617400

00618400

L.H.

R.H.

Clockwise 

Anti-Clockwise 

Clockwise 

Anti-Clockwise 

Wing Nut

Base

5-H-9-0-1-L-CL 

5-H-9-0-1-L-AC 

5-H-9-0-1-R-CL 

5-H-9-0-1-R-AC 

00611400

00612400

00609400

00610400

Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation





Clockwise Shaft Rotation

Anti-clockwise Shaft Rotation





Anti-clockwise Shaft Rotation

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Revolution

H Series — Durant®

Dimensions

Figure 30. H Series — Approximate Dimensions

4.38 (111.3)

0.34

(8.5)

1.12

(28.4)

2.25 (57.2)

3.95

(100.4)

2.75

(69.9) 0.98

(25.0)

Dia. 0.312

(7.92)

1.80

(45.7)

2.76

(70.1)

0.91

(23.0)

2.00

(50.8)

Dia. 0.220

4 Mtg. Holes

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Mechanical Totalizers — Can Counters

HF Series — Durant®

Product Description

Model HF Series can counters are

designed for use on can ﬁlling, labeling

and sealing machines and conveyors to

count various sizes of cans. Gear box on

counter is changeable to any one of four

positions, giving great ﬂexibility of

installation. Adjustable tension screw

prevents spinning and assures peak

accuracy.

Technical Data and

Speciﬁcations

■Figures: 6

■Figure Sizes: 11/32 inch (8.7 mm)

high, white-on-black background

■Reset: Wing nut or key-lock

Cat. No. 6-HF-4-1-R-CL

Product Selection

Table 19. Product Selection — HF Series Can Counters

Special Feature: 6:1 ratio.

Special Feature: 4:1 ratio.

When Ordering Specify

To determine a model number from the Product Selection table for Model HF

Series Can Counters, consider:

■Type of reset ■Rotation direction of star wheel

Positions

Figure 31. HF Series — Can Counter Positions

Note: All Model HF Series counters are shipped from the factory in position 1. The instruction

sheet that accompanies each counter provides directions for moving the star wheel to

position 2, 3 or 4.

Dimensions

Figure 32. HF Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Drive Rotation Reset Mounting Catalog

Number

Order

Number *

Star Wheel Diameter — 6-pt., 5.25" (133.4 mm)

R.H.

Clockwise

Anti-Clockwise

Clockwise

Anti-Clockwise

Wing Nut

Key-Lock

Back

6-HF-4-1-R-CL 

6-HF-4-1-R-AC 

6-HF-4-2-R-CL 

6-HF-4-2-R-AC 

40181402

40181403

40181406

40181407

Star Wheel Diameter — 4-pt., 7.375" (187.3 mm)

R.H.

Clockwise

Anti-Clockwise

Clockwise

Anti-Clockwise

Wing Nut

Key-Lock

Back

6-HF-3-1-R-CL 

6-HF-3-1-R-AC 

6-HF-3-2-R-CL 

6-HF-3-2-R-AC 

40182402

40182403

40182406

40182407

AC CL AC

Position 1

Position 3

Position 2

Position 4

Key

Lock

Reset

Wing

Nut

Reset

4.51 (114.6)

0.75

(19.1)

1.20 (30.6)

8.18

(207.9)

Dia. 0.196 (4.98)

4 Mtg. Holes

3.00

(76.2)

2.06

(52.4)

3.73

(94.8)

6.20

(157.6)

2.47

(62.7)

3.53

(89.7)

2.13

(54.0)

0.81

(20.6)

3.00 (76.2)

1.62

(41.1)

3.00

(76.2)

1.41

(35.8)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electromechanical Totalizers

Micro Display Counter — Eaton

Contents

Description Page

Electric Counters

Micro Display Courier . . . . 16

SE Series . . . . . . . . . . . . . . . 17

MF Series . . . . . . . . . . . . . . 18

RMF Series . . . . . . . . . . . . . 19

ME Series . . . . . . . . . . . . . . 20

Features

■7-digit micro adding counter

■High shock resistance

■Low power consumption; suitable

for battery consumption

■Small dimensions

■Large optical ﬁgures

■Different viewing possibilities

■Flush mount with integrated spring

clip

■Protection IP65

■Stores value also at power failure

■Long service life

Standards and Certiﬁcations

■cRU®us Certiﬁed

■CE Marked

Cat. No. 7-Y-3013PM-401

Technical Data and Speciﬁcations

■Electrical Connections: Built-in

counter, ﬂying leads, AWG 22,

approx. 5.9 Inch (150 mm)

■Power consumption at 68°F (20°C)

and nominal voltage —

❑At 25 lmp/s: Approx. 250 mW

■Rated Voltage: 12V DC ±10%

■Counting Frequency: 25 lmp/s

■Pulse Duration: Min. 20 mS

■Pulse Interval: Min. 20 mS

■Cycle Duration Factor: 100%

■Number of Digits: 7

■Counting System: Adding

■Height of Figures: 0.05 x 0.16 Inch

(1.2 x 4 mm) Optical

■Color of Figures: White-on-black

■Reset: No reset

■Ambient Temperature: 14 to 140°F

(-10 to 60°C)

■Mounting Position: Any

■Operating Life: >50x106 pulses

■Protection: IP65 (only front side)

■Housing: Clear plastic

■Weight: 0.53 – 0.71 oz (15 – 18 g)

Product Selection

Table 20. Product Selection — Micro Display Counter

Dimensions

Figure 33. Micro Display Counter — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Micro Display Counter 7-Y-3013PM-401

1.26 (32)

0.59 (15)

0.59

(15)

1.29

(32.7)

0.51 x 1.18

(13 x 29.9)

0.08 (2)

0.04 (1.1)

0.12 (3)

Max.

Rmax 0.02 (0.5)

0.51 +0.02

(13 +0.5)

1.18 +0.01

(30 +0.3)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electromechanical Totalizers

SE Series

Features

■Low-cost electromechanical counter

■Multiple voltage ranges for almost

any application

■Compact with various mounting

options

■Wire leads for electrical connections

Standards and Certiﬁcations

■UL Recognized

Technical Data and

Speciﬁcations

■Figures: 6

■Count Speed: 600 cpm

■Figure Size: 5/32" (4.0 mm)

■Reset: None

■Mounting: Base, bottom, top, panel

or snap-in

■Finish: Black, self-extinguishing

plastic

■Power Requirements —

DC: 1.5W, AC: 5.0V

Dimensions

Cat. No.

6-Y-41610-401-SE

1.01

(25.7)

1.00

(25.4)

Bottom Mount Panel MountTop Mount

Special Top Mount Snap Mount

Base Mount

Special Base Mount

1.31

(33.2)

2.16

(54.9)

0.63

(15.9)

(254)

(2) #4-40 UNC 28

1.80

(45.7)

0.69

(17.4)

1.97

(50)

1.50

(38.1)

1.75

(44.5)

1.13

(28.6)

2.34

(59.5)

2.16

(54.9)

0.19

(4.7)

1.00

(25.4)

1.88

(47.6) (4) 0.13 (3.2) Dia.

Mounting Holes

0.14 (3.6) Dia.

2.19

(55.5)

2.16

(54.9)

0.19

(4.7)

1.52

(38.7)

Mounting Holes

for #6 FHMS

2.16

(54.9)

0.88

(22.2)

(2) #4-40

Mounting

Holes 1.0

(25.4)

1.31

(33.2)

2.16

(54.9)

(254)

1.00

(25.4)

(2) #4-40

Mounting

Holes 1.06

(26.9)

1.31

(33.2)

1.81

(46.0)

1.44

(36.5)

2.16

(54.9)

2.16

(54.9)

(254)

Panel Cutout

1.70 x 1.33

(43.2 x 33.8)

Panel Cutout

1.43 x 1.13

(36.3 x 28.6)

Figure 34. SE Series — Approximate Dimensions in Inches (mm)

Product Selection

Table 21. Product Selection — SE Series Electromechanical Counters

Description Catalog

Number

Order

Number *

6-digit Electric Counter

Bottom Mount Sub-miniature 12V DC

Bottom Mount Sub-miniature 24V DC

Bottom Mount Sub-miniature 120V AC

Bottom Mount Sub-miniature 240V AC

6-Y-41610-401-SE

6-Y-41610-402-SE

6-Y-41610-406-SE

6-Y-41610-407-SE

41610401

41610402

41610406

41610407

Base Mount Sub-miniature 12V DC

Base Mount Sub-miniature 24V DC

Base Mount Sub-miniature 120V AC

Base Mount Sub-miniature 240V AC

6-Y-41611-401-SE

6-Y-41611-402-SE

6-Y-41611-406-SE

6-Y-41611-407-SE

41611401

41611402

41611406

41611407

Top Mount Sub-miniature 12V DC

Top Mount Sub-miniature 24V DC

Top Mount Sub-miniature 120V AC

Top Mount Sub-miniature 240V AC

6-Y-41612-401-SE

6-Y-41612-402-SE

6-Y-41612-406-SE

6-Y-41612-407-SE

41612401

41612402

41612406

41612407

Panel Mount Sub-miniature 12V DC

Panel Mount Sub-miniature 24V DC

Panel Mount Sub-miniature 120V AC

Panel Mount Sub-miniature 240V AC

6-Y-41613-401-SE

6-Y-41613-402-SE

6-Y-41613-406-SE

6-Y-41613-407-SE

41613401

41613402

41613406

41613407

Special Base Mount Sub-miniature 12V DC

Special Base Mount Sub-miniature 24V DC

Special Base Mount Sub-miniature 120V AC

Special Base Mount Sub-miniature 240V AC

6-Y-41622-401-SE

6-Y-41622-402-SE

6-Y-41622-406-SE

6-Y-41622-407-SE

41622401

41622402

41622406

41622407

Special Top Mount Sub-miniature 12V DC

Special Top Mount Sub-miniature 24V DC

Special Top Mount Sub-miniature 120V AC

Special Top Mount Sub-miniature 240V AC

6-Y-41623-401-SE

6-Y-41623-402-SE

6-Y-41623-406-SE

6-Y-41623-407-SE

41623401

41623402

41623406

41623407

Snap-In Mount Sub-miniature 12V DC

Snap-In Mount Sub-miniature 24V DC

Snap-In Mount Sub-miniature 120V AC

Snap-In Mount Sub-miniature 240V AC

6-Y-42613-401-SE

6-Y-42613-402-SE

6-Y-42613-406-SE

6-Y-42613-407-SE

42613401

42613402

42613406

42613407

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electromechanical Totalizers

MF Series — Durant®

Product Description

Model MF Series are shaded pole electric

counters with straight AC operation

and feature a non-rectiﬁed, shaded

pole coil designed to withstand tran-

sient, high voltage spikes. This feature,

combined with a simpliﬁed, hinged

escapement drive, also eliminates the

possibility of mis- counts and greatly

adds to the life of the counter. Tallies at

speeds up to 750 cpm.

Technical Data and

Speciﬁcations

■Figures: 6 or 7

■Speed: Up to 750 cpm

■Figure Size: 3/16 inch (4.8 mm) high,

white-on-black background

■Reset: Knob, key or non-reset

Cat. No. 6-Y-1-MF-120A

Panel Mounted with Tumbler Lock

4.62 x 1.44 (117.3 x 36.5) Panel Opening

Panel Mounted

3.51 x 1.44 (89.3 x 36.5) Panel Opening

Base Mounted

5.50 (139.7)

5.12 (130.2)

0.12

(3.0)

0.19

(4.8)

2.12

(54.0)

1.75

(44.5)

0.97 (24.6)

Dia. 0.15 (3.81)

4 Mtg. Holes

0.16

(4.0)

1.25

(31.8) 0.09

(2.4)

0.06

(1.6)

3.68 (93.5)

Panel

2.56

(65.0)

2.09

(53.1)

0.25

(6.3)

3.68 (93.5)

2.56 (65.0)

0.56

(14.2)

0.62

(15.7)

2.56

(65.0)

Panel

0.30 (7.5)

0.19 (4.8)

4.00 (101.6)

4.37 (111.1)

Dia. 0.15 (3.81)

4 Mtg. Holes

#6-32 Top Mount

Models Only

4 Mtg. Holes

1.25

(31.8)

1.62

(41.3)

1.37

(34.9)

0.87

(22.2)

Dia. 0.14 (3.6)

4 Mtg. Holes

0.28

(7.1)

2.56

(65.0)

0.62

(15.7)

3.16 (80.2) 0.41

(10.3)

2.09

(53.1)

0.25

(6.3)

3.68 (93.5)

3.31 (84.1)

2.56 (65.0) 0.56

(14.2)

0.19

(4.8)

Figure 35. MF Series — Approximate Dimensions in Inches (mm)

■Mounting: Base or panel mount

■Finish: Black frame and side covers

■Electrical Connections: 2-wire

leads, 9" (229 mm) long, AWG 22

(0.34 mm2), stripped 0.38" (9.5 mm)

■Power Requirements: 12 watts

■Coils: Various AC voltages and fre-

quencies can be supplied on special

order. Count coils are designed for

continuous duty at rated voltage.

Product Selection

Table 22. Product Selection — MF Series Electric Counters

UL Recognized.

Dimensions

Table 23. MF Series — Approximate Dimensions in Inches (mm)

No. of

Figures

Voltage Reset Mounting Catalog

Number

Order

Number

120 AC

240 AC

120 AC

24 AC

Knob

Base

7-Y-1-MF-120A 

7-Y-1-MF-240A

6-Y-1-MF-120A 

6-Y-1-MF-24A

32650400

32650402

32651400

32651402

240 AC

230 AC/50 Hz

120 AC

Knob

Non-reset

Base

Panel

6-Y-1-MF-240A

6-Y-1-MF-230A

7-Y-1-MF-PM-120A 

7-Y-13-MF-PM-120A 

32651403

32651412

32652400

32652402

120 AC

24 AC

240 AC

120 AC

Knob

Non-reset

Panel

6-Y-1-MF-PM-120A 

6-Y-1-MF-PM-24A

6-Y-1-MF-PM-240A

6-Y-13-MF-PM-120A 

32653400

32653402

32653403

32653405

240 AC

120 AC

24 AC

240 AC

Non-reset

Keylock reset

Panel

6-Y-13-MF-PM-240A

6-Y-12-MF-PM-120A 

6-Y-12-MF-PM-24A

6-Y-12-MF-PM-240A

32653410

32654400

32654403

32654404

120 AC

240 AC

120 AC

Keylock reset

Non-reset

Panel

Base

7-Y-12-MF-PM-120A 

6-Y-13-MF-120A 

6-Y-13-MF-240A

7-Y-13-MF-120A

32655400

32658400

32658402

32659400

Model A B C D E F

6 Figures 1.73 (44.0) 1.58 (40.0) 1.73 (43.9) 2.80 (71.1) 1.73 (44.0) 1.12 (28.6)

7 Figures 2.02 (51.4) 1.29 (32.7) 2.03 (51.6) 2.50 (63.5) 2.02 (51.4) 0.84 (21.2)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electromechanical Totalizers

RMF Series — Durant®

Product Description

Model RMF Series of electric counters

are designed to give accurate counts

through a wide range of speeds up to

1000 cpm. It features a strong, silent,

fast operating DC electromagnetic

drive with a compact, dependable

built-in higher capacity rectiﬁer for AC

operation. The counter has a minimum

of moving parts that never need lubri-

cation under normal operating condi-

tions. Compact and rigid, it continues

to operate dependably even when sub-

ject to severe shock and vibrations.

Entirely enclosed to prevent damage

from moisture and dust. Available in

6 or 7 ﬁgures.

Technical Data and

Speciﬁcations

■Figures: 6 or 7

■Speed: Up to 1000 cpm

■Figure Size: 3/16 inch (4.8 mm) high,

white-on-black background

■Reset: Knob, key or non-reset

■Mounting: Base or panel mount

■Finish: Black frame and side covers

■Electrical Connections: 2-wire

leads, 9" (229 mm) long, AWG 22

(0.34 mm2), stripped 0.38" (9.5 mm)

■Power Requirements: 7 watts

■Coils: Various voltages and frequen-

cies can be supplied on special

order. Count coils are designed for

continuous duty at rated voltage.

Cat. No. 6-Y-1-RMF-115A

Product Selection

Table 24. Product Selection — RMF Series Electric Counters

UL Recognized.

When Ordering Specify

To determine a model number from the Product Selection table for Model RMF

Series Electronic Counters, consider:

■Number of ﬁgures

■Voltage

■Type of reset

■Type of mounting

Dimensions

Refer to Table 23 and Figure 35 on Page 18 for information.

No. of

Figures

Voltage Reset Mounting Catalog

Number

Order

Number

24 DC

24 AC

24 DC

115 AC

230 AC

Knob

Panel

Base

6-Y-1-RMF-PM-24D

6-Y-1-RMF-PM-24A

7-Y-1-RMF-PM-24D

7-Y-1-RMF-115A 

7-Y-1-RMF-230A

31013400

31013402

31019400

31025400

31025402

115 AC

230 AC

115 AC

Non-reset

Knob

Non-reset

Knob

Non-reset

Base

Panel

Base

7-Y-13-RMF-115A 

7-Y-1-RMF-PM-115A 

7-Y-13-RMF-PM-115A 

7-Y-1-RMF-PM-230A

6-Y-13-RMF-115A 

31026400

31026401

31026402

31026410

31039400

230 AC

24 AC

230 AC

115 AC

Non-reset

Knob

Keylock reset

Base

Panel

6-Y-13-RMF-230A

6-Y-13-RMF-24A

6-Y-1-RMF-PM-230A

6-Y-1-RMF-PM-115A 

6-Y-12-RMF-PM-115A 

31039404

31039407

31066413

31066416

31083403

230 AC

115 AC

24 AC

24 DC

Keylock reset

Panel

6-Y-12-RMF-PM-230A

7-Y-12-RMF-PM-115A 

6-Y-12-RMF-PM-24A

6-Y-12-RMF-PM-24D

7-Y-12-RMF-PM-24D

31083405

31083409

31083411

31083415

31083421

230 AC

24 AC

240 AC

115 AC

Keylock reset

Knob

Non-reset

Panel

Base

Panel

7-Y-12-RMF-PM-230A

6-Y-1-RMF-24A

6-Y-1-RMF-240A

6-Y-1-RMF-115A 

6-Y-13-RMF-PM-115A 

31083427

31155400

31155401

31155402

31155405

24 DC

24 AC

24 DC

230 AC

24 AC

Non-reset

Panel

Base

Panel

6-Y-13-RMF-PM-24D

7-Y-13-RMF-24A

7-Y-13-RMF-24D

7-Y-13-RMF-PM-24D

6-Y-13-RMF-PM-230A

6-Y-13-RMF-PM-24A

31155442

31573400

31573401

33183400

33183404

33183405

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electromechanical Totalizers

ME Series — Durant®

Product Description

Small in size and price, but large in

design versatility and model variety is

the ME Series of miniature electric

counters. Models in most popular

AC or DC voltages operate on as little

as 3 watts, with the non-reset models

measuring only 1 x 1.593 x 2.187 inches

(25.4 x 40.5 x 55.5 mm) and weighing

just three ounces (85 grams).

Available in 4, 6 or 7 ﬁgures, the

counters feature stainless steel self-

lubricating shafts, nylatron pinions

and a synchronous electromagnetic

drive to assure accurate, reliable, long

life operation. Designed for mounting

ﬂexibility and aesthetic attractiveness,

the miniature electric counters are

available with three types of mounting

and a glare retarding ﬁnish Delrin,

with crisp easy-to-read numerals set

close to a tamper-proof sealed ﬁgure

window.

Standards and Certiﬁcations

■UL Recognized

Technical Data and

Speciﬁcations

■Figures: 4, 6 and 7

■Speed: Up to 1000 cpm

■Figure Size: 3/16 inch (4.8 mm) high

■Reset: Pushbutton and non-reset

■Reset Force: Pushbutton models

only, 20 oz. (568 grams) maximum

■Mounting: Base, bottom, panel and

plug-in pin

■Finish: Black self-extinguishing plastic

■Electrical Connections: Wire leads,

10 inches (254 mm) long, AWG 20,

stripped 3/8 inch (9.5 mm), and pin

terminals

■Power Requirements: 3W

■Coils: Count coils are designed for

continuous duty at rated voltage.

Cat. No. 6-Y-41346-406-ME

Product Selection

Table 25. Product Selection — ME Series Miniature Electric Counters

When Ordering Specify

When ordering ME Series Miniature Electric Counters, specify Catalog Numbers

according to the features selected.

No. of

Figures

Voltage Mounting Reset Catalog

Number

Order

Number *

4 12V DC

24V DC

120V AC

240V AC

Bottom Pushbutton 4-Y-41312-401-MEQ

4-Y-41312-402-MEQ

4-Y-41312-406-MEQ

4-Y-41312-407-MEQ

41312401

41312402

41312406

41312407

4 12V DC

24V DC

120V AC

240V AC

Base Pushbutton 4-Y-41313-401-MEQ

4-Y-41313-402-MEQ

4-Y-41313-406-MEQ

4-Y-41313-407-MEQ

41313401

41313402

41313406

41313407

4 12V DC

24V DC

120V AC

240V AC

Panel Pushbutton 4-Y-41314-401-MEQ

4-Y-41314-402-MEQ

4-Y-41314-406-MEQ

4-Y-41314-407-MEQ

41314401

41314402

41314406

41314407

6 12V DC

24V DC

120V AC

240V AC

Bottom Non-reset 6-Y-41119-401-ME

6-Y-41119-402-ME

6-Y-41119-406-ME

6-Y-41119-407-ME

41119401

41119402

41119406

41119407

6 12V DC

24V DC

120V AC

240V AC

Base Non-reset 6-Y-41345-401-ME

6-Y-41345-402-ME

6-Y-41345-406-ME

6-Y-41345-407-ME

41345401

41345402

41345406

41345407

6 12V DC

24V DC

120V AC

240V AC

Panel Non-reset 6-Y-41346-401-ME

6-Y-41346-402-ME

6-Y-41346-406-ME

6-Y-41346-407-ME

41346401

41346402

41346406

41346407

7 12V DC

24V DC

120V AC

240V AC

Bottom Non-reset 7-Y-41238-401-ME

7-Y-41238-402-ME

7-Y-41238-406-ME

7-Y-41238-407-ME

41238401

41238402

41238406

41238407

7 12V DC

24V DC

120V AC

240V AC

Base Non-reset 7-Y-41337-401-ME

7-Y-41337-402-ME

7-Y-41337-406-ME

7-Y-41337-407-ME

41337401

41337402

41337406

41337407

7 12V DC

24V DC

120V AC

240V AC

Panel Non-reset 7-Y-41349-401-ME

7-Y-41349-402-ME

7-Y-41349-406-ME

7-Y-41349-407-ME

41349401

41349402

41349406

41349407

Bottom Mount

Wire Leads

Base Mount

Wire Leads

Panel Mount

Wire Leads

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

April 2007

Electromechanical Totalizers

ME Series — Durant®

Dimensions

Figure 36. ME Series Counter — Approximate Dimensions

Table 26. ME Series Counter — Approximate Dimensions in Inches (mm)

Table 27. Recommended Panel Mount Cut-Outs in Inches (mm)

4 Figure Pushbutton Reset Counters 6 and 7 Figure Non-reset Counters

Dimension Inches (mm) Dimension Inches (mm)

1.00 (25.4)

1.60 (40.6)

2.64 (67.1)

2.19 (55.6)

1.80 (45.7)

1.40 (35.6)

.69 (17.5)

1.88 (47.8)

.50 (12.7)

.49 (12.4)

.94 (23.9)

2.45 (62.2)

.45 (11.4)

.63 (16.0)

.19 (4.8)

.68 (17.3)

1.00 (25.4)

1.60 (40.6)

2.38 (60.5)

2.19 (55.6)

1.80 (45.7)

1.40 (35.6)

.69 (17.5)

1.88 (47.8)

.50 (12.7)

.49 (12.4)

.94 (23.9)

2.19 (55.6)

.45 (11.4)

.63 (16.0)

.19 (4.8)

.88 (22.4)

4 Figure Counters 6 and 7 Figure Counters

Pushbutton Reset Non-reset

1.72 x 1.11

(43.7 x 28.2)

1.72 x 1.11

(43.7 x 28.2)

Panel Mounted Bottom Mounting

Base Mounted Bottom Mounted

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

1/32 DIN LCD — Totalizers

Contents

Description Page

Electronic Totalizers

1/32 DIN LCD —

Totalizers . . . . . . . . . . . . . . 22

1/32 DIN LED

Multifunction Totalizer/

Timer/Ratemeter . . . . . . . . 24

Courier Series . . . . . . . . . . . 25

1/8 DIN LED

Multifunction Totalizer/

Timer/Ratemeter . . . . . . . . 27

Eclipse Series . . . . . . . . . . . 28

President Series . . . . . . . . . 30

Ambassador Series . . . . . . 34

Features

■Low price and high efﬁciency

■Large 8-digit LCD display, height of

the ﬁgures 0.31 Inch (8 mm)

■Various counting modes like up/

down differential and phase

discriminator counting, also with

pulse doubling for connection with

incremental encoders

■High voltage input for 10 – 260V

AC/DC voltage pulses

■IP65

■Screw terminals, RM 5 mm

■Lifetime of the battery

approximately 8 years

■Locking of the reset key

■Operating temperature 14 to 140°F

(-10 to 60°C)

■All version of positive or negative

counting edge

■Filter function for bounce-free

counting with mechanical contacts

Cat. No. E5-024-C0400

Standards and Certiﬁcations

■UL Recognized

■CE Marked

Technical Data and Speciﬁcations

■Power Supply: Non-replaceable

lithium battery (lifetime

approximately 8 years at 68°F (20°C)

■Display: LCD, 8-digits, height of the

ﬁgures 0.31 Inch (8 mm)

■Mode: Adding or subtracting

(selectable), counting direction,

differential counting or phase

discriminator single or dual

evaluation (selectable)

■Display Range: -9999999 –

99999999, with overﬂow display

■Reset: Manual and electrical

■Interference Emissions: EN 55011

Class B, EN 61 000-6-2, EN 61010

Section 1 (only AC versions)

■Housing; Dark gray RAL 7021

■Operating Temperature: 14 to 131°F

(-10 to 55°C)

■Ambient Temperature: 14 to 140°F

(-10 to 60°C)

■Storage Temperature: -4 to 158°F

(-20 to 70°C)

■Protection: IP65 (from front)

■Weight: Approx. 1.76 oz (50 g)

■Counting Inputs —

❑Counting input of the DC version,

max. 30V DC

– Slow counting input, max.

30 Hz (NPN)

– Fast counting input, max.

12 kHz (PNP)

– Switching Level —

NPN:

Low 0 – 0.7V, High 3 – 30V DC

PNP:

Low 0 – 0.7V, High 4 – 30V DC

❑Counting Input of the High Volt-

age Versions: 10 – 260V AC/DC

– Counting Input: Optocoupler

input, max. 30 Hz

– Min. Pulse Time: 16 mS

– Switching Level—

Low: 0 – 2V AC/DC

High: 10 – 260V AC/DC

■Counting Direction Switching (only

DC versions) —

❑Contact input, open collector NPN

(switching at 0V DC)

❑Switching level, NPN —

Low, 0 – 0.7V, High 3 – 5V DC

■Reset Input (only DC and High

Voltage) —

❑Minimum pulse time, DC: 50 mS;

high voltage: 16 mS

❑Contact input NPN —

– Low: 0 – 0.7V

– High: 3 – 30V DC

❑High voltage input, 10 – 260V

AC/DC

■Electrical Reset Key Locking (for DC

and AC) —

❑Contact input, open collector NPN

(switching at 0V)

❑Switching level, NPN —

Low, 0 – 0.7V, High 3 – 5V DC

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

April 2007

Electronic Totalizers

1/32 DIN LCD — Totalizers

Product Selection

Table 28. Product Selection — 1/32 DIN LCD, Totalizers

Dimensions

Figure 37. 1/32 DIN LCD, Totalizers — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

8-digit LCD Totalizer, Battery Power

0.94 x 1.89 Inch (24 x 48 mm)

10 – 260V Input 0.94 x 1.89 Inch (24 x 48 mm)

Count Up/Down 0.94 x 1.89 Inch (24 x 48 mm)

E5-024-C0400

E5-024-C0408

E5-024-C0410

1.77 + 0.024

(45 + 0.6)

1.77 + 0.012

(22.2 +0.3)

572690.43

1.89 (48)

MAX. 1.89 (19.3)

0.11 (2.8)

0.12 (3)

1.88 (47.7)

0.87 x 1.77

(22 x 45)

0.94

(24)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

1/32 DIN LED Multifunction Totalizer/Timer/Ratemeter

Features

■Display counter adding and

subtracting

■Position display

■Frequency counter/ratemeter

■Timer

■Display Range: -199.999 – 999.999

with zero blanking

■Screw terminal

■Locking SET-Key

Standards and Certiﬁcations

■UL Recognized

■CE Marked

Technical Data and

Speciﬁcations

■Supply Voltage: 10 – 30V DC

with reverse polarity protection

■Current Consumption: Max. 50 mA

■Display: 6-digit red, 7-segment LED

display; 0.31 Inch (8 mm) high

■Data Backup: EEPROM

■Housing: Dimension 3.78 x 1.89 Inch

(96 x 48 mm) according to DIN 43

700; RAL 7021 gray

■Polarity of Inputs: Programmable,

NPN or PNP

■Input Resistance: Approx. 10 k1

■Counting Frequency: 20 kHz, can be

damped to 30 Hz, position display

max. 11 kHz

■Resolution: Timer 0.001 sec.

■Reset Time: 5 mS

■Level of Inputs —

❑High: 0.6 x UB – 30V DC

❑Low: 0 – 0.2 x UB [V DC]

■Octocoupler Output: Max. 30V,

10 mA

■Error —

❑Tachometer: <0.1%

❑Timer: <50 ppm

Cat. No. E5-024-E0402

■Ambient Temperature: 14 to 122°F

(-10 to 50°C)

■Storage Temperature: -13 to 167°F

(-25 to 75°C)

■EMC: According to EC EMC directive

89/36/EWG

■

Immunity to Interference:

EN 61 000-6-4/

EN 55011 Class B

■Emitted Interference: EN 61 000-6-2

■Protection: IP65 (from front)

■Weight: Approx. 5.29 (150 g)

Product Selection

Table 29. Product Selection — 1/32 DIN LED Multifunction Totalizer/Timer/Ratemeter

Dimensions

Figure 38. 1/32 DIN LED Multifunction Totalizer/Timer/Ratemeter — Approximate Dimensions in

Inches (mm)

Description Catalog

Number *

LED Single Channel Totalizer, 10 – 30V DC Power

0.94 x 1.89 Inch (24 x 48 mm)

E5-024-E0402

LED Multifunction Totalizer/Timer/Ratemeter 10 – 30V DC Power

0.94 x 1.89 Inch (24 x 48 mm)

E5-424-E0402

LED Double-Function Totalizer/Timer/Ratemeter 10 – 30V DC Power

0.94 x 1.89 Inch (24 x 48 mm)

E5-524-E0402

LED Totalizer with Quadrature, 10 – 30V DC Power

0.94 x 1.89 Inch (24 x 48 mm)

E5-024-E0432

2.32

(59.0)

0.26

(6.5)

0.16

(4.0)

Max. 0.76

(19.3)

0.87 x 1.77

(22.0 x 45.0)

1.89

(48.0)

Panel Cut-Out:

0.87 + 0.01 x 1.77 + 0.02

(22.2 + 0.3 x 45 + 0.6)

0.94

(24.0)

2.09

(53.0)

1.10

(28.0)

0.98 + 0.02

(25 + 0.5)

1.97 + 0.02

(50 + 0.6)

Panel Cut-Out

0.98 x 1.97

(25 x 50)

0.16

(4.0)

0.04

(1.0)

2.20

(56.0)

1.57

(40)

1.26

(32) 0.98 + 0.02

(25 + 0.5)

1.26 + 0.004

(32 + 0.1)

1.97 + 0.02

(50 + 0.6)

Panel Cut-Out

0.98 x 1.97

(25 x 50)

0.16

(4.0)

0.04

(1.0)

Connections:

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

Courier Series — Durant®

Features

■8-digit totalizer

■1/Tau ratemeter

■Scaling capabilities

■Remote reset terminal

■0.43-inch (10.9 mm) display

■Front panel reset

■NEMA 4X

Standards and Certiﬁcations

■CE Marked

Technical Data and

Speciﬁcations

Power

■Internal Battery: 3V, Lithium

■Life expectancy: 5 years +

■Replacement Part: 36367-202

Backlight

10 – 30V DC @ 30 mA max.

Note: Derate operating temperature 1°C/

Volt above 17V DC.

■Reverse polarity protected

Courier Series

Physical

■Operating Temperature: -4 to 158°F

(-20 to 70°C)

■Storage Temperature: -4 to 158°F

(-20 to 70°C)

■Operating Humidity: 60%

Non-condensing.

■Weight: 2.2 oz. (62 g) net.

■Display Size: 0.43" (10.9 mm) high

■Front Panel Rating: NEMA 4X when

mounted with gasket provided

■Case Material: Cycolac X-17

Totalizer

■Type: UP counting

■Digits: 8

Count Accuracy

■100% when operated within

speciﬁcations

DC Common (Terminal 1) Count Inputs

■Input B (Terminal 2) Low speed

input designed for contact closures

to DC common

❑Speed: 0 to 20 Hz

❑Min. Low Time: 10 mS

❑Min. High Time: 40 mS

❑Input Impedance: 101k Ohm

❑Voltage Thresholds —

Low: 0 – 0.4V DC

High: 2.0 – 28V DC

Max. High: 28V DC

■Input A (Terminal 3) High speed

input requiring a voltage source

such as a current sourcing sensor or

a current sinking sensor used with

the provided pull up resistors

❑Speed: 0 to 10 kHz

❑Min. Low Time: 80 mS

❑Min. High Time: 20 mS

Note: The above times are with a 0 – 5.0V

swing.

❑Input Impedance: 2k Ohm above

5V DC

❑Voltage Thresholds —

Low: 0 – 1.2V DC

High: 2.0 – 28V DC

Max. High: 28V DC

Reset Input

■Reset Input (Terminal 4) designed

for contact closures to DC common

❑Min. Low: 0.25 to 1 sec. (reset is

maintained)

Note: The required pulse width varies with

count speed, scale factor and number of

digits displayed.

❑Voltage Thresholds —

Low: 0 – 0.4V DC

High: 2.0 – 28V DC

Front Panel Reset Enable

■Front Panel Reset Enable

(Terminal 5)

❑Operation: Level sensitive

(maintained)

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

Courier Series — Durant®

Product Selection

Table 30. Product Selection — Courier Series, 8-digit LCD

When Ordering Specify

When ordering Courier series electronic totalizers and ratemeters, specify Order

Numbers according to the features selected.

Dimensions

Figure 39. Courier Series Totalizers — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Totalizer, Battery

Add/Subtract (10k Hz, PNP input) Totalizer, Battery

Add/Subtract (20 Hz, NPN/Contact input) Totalizer, Battery

Quadrature (10k Hz, PNP input) Totalizer, Battery

53300400

53300401

53300402

53300403

Totalizer/Ratemeter, Battery

Totalizer/Ratemeter @ 100 Hz, Battery

RMF Panel Mount Totalizer, Key Reset, 60 – 160V AC/DC Count Input

RMF Panel Mount Totalizer, Dry Contact Input

RMF Panel Mount Totalizer, 60 – 160V AC/DC Count Input

53300405

53300465

53300800

53300850

53300851

Totalizer — Extended Temperature Range, Battery

Totalizer — 1/Tau Ratemeter — Extended Temperature Range

Totalizer/Ratemeter — Extended Temperature Range, Battery

Totalizer/Ratemeter, Mag Pickup, Battery

Backlight Totalizer, Battery

53301400

53301404

53301405

53301475

53302400

Backlight Add/Subtract (10k Hz, PNP input) Totalizer, Battery

Backlight Add/Subtract (20 Hz, NPN/Contact input) Totalizer, Battery

Backlight Quadrature (10k Hz, PNP input) Totalizer, Battery

Backlight Totalizer/Ratemeter, Battery

53302401

53302402

53302403

53302405

1.30

(33.0)

1.57

(39.9)

1.25

(31.8)

2.67 (67.8)2.95 (74.9)

Recommended

Panel Cutout

T/R RST

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

1/8 DIN LED Multifunction Totalizer/Timer/Ratemeter

Features

■Display counter adding and

subtracting

■Position display

■Frequency counter/ratemeter

■Timer, res. up to 0.001 sec.

■Programmable mode

■Display Range: -199.999 – 999.999

with zero blanking

■Connection with screw terminal

■Locking SET-Key for reset

Standards and Certiﬁcations

■UL Recognized

■CE Marked

Technical Data and

Speciﬁcations

■Supply Voltage: 10 – 30V DC

with reverse polarity protection;

90 – 260V AC

■Current Consumption: Max. 50 mA

6 VA

■Display: 6-digit red, 7-segment LED

display; 0.55 Inch (14 mm) high

■Data Backup: EEPROM

■Housing: Dimension 3.78 x 1.89 Inch

(96 x 48 mm) according to DIN

43 700; RAL 7021 gray

■Polarity of Inputs: Programmable,

NPN or PNP for all inputs

■Input Resistance: Approx. 10 k1

■Counting Frequency: 60 kHz, can be

damped to 30 Hz depending on

operating mode at position display

max. 25 kHz 

■Reset Time: 5 mS

■Resolution Timer: Up to 0.001 sec.

For further speciﬁcations, please refer to the

user manual.

Cat. No. E5-496-E0401

■Input Switching Level —

DC Version (standard version)

❑High: 0.6 x UB – 30V DC

❑Low: 0 – 0.2 x UB [V DC]

AC Version

❑High: 12 – 30V DC

❑Low: 0 – 4V DC

■Input Switching Level —

5V Version

❑High: 4 – 30V DC

❑Low: 0 – 2V DC

■Voltage Supply for Sensors: 24V DC

±15%/100 mA at AC versions

■Accuracy —

❑Tachometer: <0.1%

❑Timer: <50 ppm

■Ambient Temperature: -4 to 149°F

(-20 to 65°C)

■Storage Temperature: -13 to 167°F

(-25 to 75°C)

■EMC: According to EC EMC directive

89/36/EWG

■

Immunity to Interference:

EN 61 000-6-4/

EN 55011 Class B

■Emitted Interference: EN 61-000-6-2

■Protection: IP65 (from front)

■Weight: Approx. 5.29 oz (150 g)

Product Selection

Table 31. Product Selection — 1/8 DIN LED Multifunction Totalizer/Timer/Ratemeter

Dimensions

Figure 40. 1/8 DIN LED Multifunction Totalizer/Timer/Ratemeter — Approximate Dimensions in

Inches (mm)

Description Catalog

Number *

LED Multifunction Counter/Timer/Ratemeter

90 – 260V AC Power 3.78 x 1.89 Inch (96 x 48 mm)

10 – 30V DC Power 3.78 x 1.89 Inch (96 x 48 mm)

E5-496-E0401

E5-496-E0402

3.62 +0.03

(92.0 +0.8)

1.77 +0.02

(45.0 +0.6)

1.89

(48.0)

3.78

(96.0)

1.77 x 3.62

(44.9 x 91.9)

0.61

(15.5)

2.64

(67.1)

0.26

(6.5)

0.16

(4.0)

Max. 0.75

(19.0)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

Eclipse Series — Durant®

Features

■1/8 DIN cutout

■NEMA 4X front panel

■Universal AC power supply

(85 – 265V AC)

■DC power models (9 – 30V DC)

■Removable screw terminals

■Short Depth: 3.6 inch (91 mm)

■Front panel programming

Standards and Certiﬁcations

■UL and cUL Listed, CE Marked

Technical Data and

Speciﬁcations

Mechanical

■Cutout Dimensions:

3.62" W x 1.77" H (92 mm x 45 mm)

DIN standard

■Outline Dimensions:

4.04" W x 2.19" H x 3.87" D

(103 mm x 56 mm x 98 mm)

3.60" (92 mm) maximum depth in

panel

■Enclosure: Plastic with polyester

front label

■Connectors: Up to six depluggable

terminal blocks

Cat. No. 57700480

Environmental

■Operating Environment: Indoor use

to 2000 meters

■Temperature —

❑Operating: 32 to 122°F (0 to 50°C)

❑Storage: -4 to 158°F (-20 to 70°C)

■Humidity: 0 to 85% RH, non-

condensing

■Vibration: 2.5 Gs, 30 to 200 Hz

■Shock: 30 Gs, 11 mS half sinewave

■EMC —

❑Immunity to EN 50082-2 (Heavy

Industrial)

❑Emissions to EN 50081-2 (Heavy

Industrial)

■Front Panel: NEMA 4X when

mounted with gasket provided

■CE EMC immunity and emissions

requirements were met using

shielded wiring on the RS-485,

analog output and pulse input/

power lines. The shields were

connected to earth ground at the

Eclipse end of the shields.

■Pollution Degree 2: Overvoltage

category II

Input Power

■AC Powered Models (57701-4XX) —

❑Input Power: 85 – 295V AC,

47 – 63 Hz, 20 VA

❑External Fuse: 0.2A, 250V AC,

Time Delay (T200 mA, 250V)

❑Isolation Dielectric Strength:

2300V AC

■DC Powered Models (57700-4XX) —

❑Input Power: 9 – 30V DC, 12 VA

❑External Fuse: 2.0A, 50V DC, Time

Delay (T2A, 50V)

❑Reverse Voltage Protection: Yes

❑Isolation Dielectric Strength:

2300V AC to signal outputs and

relays, 500V AC to RS-485 and

analog outputs

Human Interface

■Display: +6, -5 digits

■Type: 0.56" (14.2 mm) high, seven

segment, red LED

Data Retention

■Memory Type: EEPROM, no batter-

ies required

■Duration: 100 years

Count Signal Input

■Sensor Type: Sink or source, DIP

switch selectable

■Input Impedance: 4.75k ohms to

+5V DC or 34.9k ohms to ground

■Thresholds —

❑High: 3.5 – 28V DC

❑Low: 0 – 1.9V DC, for single ended

signals

■Magnetic Pickup Range: 200 mV p-p

to 65 VRMS into 34.9k ohms

■Slow Response: 200 Hz max. (DIP

switch 2 and/or 5 ON)

■Fast Response — Count Mode:

A or B

❑Add/Add, Add/Subtract, Add w/

Inh: 8250/8250

■Fast Response — Count Mode:

A and B

❑Add/Add, Add/Subtract, Add w/

Inh: 3000/3000

❑Quad x1, Quad x2: 3250

❑Quad x4: 2000

Control Inputs

■Sensor Type: Sink only

■Input Impedance: 4.75k ohms to

+5V DC

■Thresholds —

❑High: 3.5 to 28V DC

❑Low: 0 – 1.9V DC

■Response: 25 mS maximum

(5V signal)

Accessory Power Output

■Voltage: 12V DC +10%/-13%

■Current: 75 mA max.

■Protection: Short circuit protected

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

Eclipse Series — Durant®

Product Selection

Table 32. Product Selection — Eclipse Series Totalizer, 6-digit LED

Dimensions

Figure 41. Eclipse Series Totalizer — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

9 – 30V DC Power

85 – 265V AC Power

57700480

57701480

Analog Out, 9 – 30V DC Power

Analog Out, 85 – 265V AC Power

57700482

57701482

RS-485 Out, 9 – 30V DC Power

RS-485 Out, 85 – 265V AC Power

57700484

57701484

RS-485 Out and Analog Out, 9 – 30V DC Power

RS-485 Out and Analog Out, 85 – 265V AC Power

57700486

57701486

Durant

3.622 ±0 .03

(92.00 ±0.8)

Panel Cutout

Max. Panel Thickness 0.190 (4.83)

4.04

(102.6)

PGM

3.31

(84.1)

3.63

(92.2)

0.27

(6.9)

2.19

(55.6) 1.772 ±0.02

(45 ±0.6)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

President Series — Durant®

Features

■8-digit, LED display, 0.56" (14 mm)

■Programmable decimal point and

count and rate scaling

■15V DC @ 100 mA output power

■Rear panel screw terminals

■NEMA 4 front panel

Standards and Certiﬁcations

■UL Listed, CSA marked

■CE Marked

Technical Data and

Speciﬁcations

Power Requirements

■AC Operation: 115/230V AC

(+10%, -20%) 47 – 63 Hz

■DC Operation: 11 – 28V DC

■Power: 18 watts

DC Power Output

■15V DC (+1, -2).

■150 mA if powered from AC or less

than 24V DC

■100 mA if powered from 24V DC or

greater

Note: DC power output is only regulated

if unit is powered by AC or greater than

18.5V DC.

Environment

■Operating Temperature: 32 to 130°F

(0 to 55°C)

■Storage Temperature: -40 to 160°F

(-40 to 70°C)

■Operating Humidity: 85% non-

condensing relative

Physical

■Memory Types: PROM, RAM, Non-

volatile NVRAM

Counter

■Count Range: 8 digits (0 to

99,999,999) with rollover

■Offset Range: 8 digits (0 to

99,999,999) (Offset is used to reset

to a non-zero number.)

■Count Modes —

❑Count with Add and Subtract

inputs

❑Count with Up/Down direction

input (Hardware doubling for

above modes is provided)

❑Count with Count Inhibit input

❑Quadrature

❑Doubled Quadrature

■Count Speed (Scale Factor of 1.0000

assumed)

❑0 to 7,500 counts per second

(CPS) with Durant Shaft Encoders

or solid-state sensors

❑0 to 3,750 CPS when hardware

doubling is implemented or when

quadrature shaft encoders are

used

❑

0 to 150 CPS when Low Frequency

is selected

Count Input Ratings

The count inputs are designed to work

with current sinking sensors (open-

collector NPN transistor output with or

without passive pull-up resistor) or

contact closures to DC Common.

■Input Voltage —

❑High state (Logical “1“, sensor off

or contact open)

– 10.5 – 24.5V DC when control is

– 7.0 – 24.5V DC when control is

– 11.0 – 24.5V DC when control is

❑Low state (Logical “0”, sensor on

or contact closed)

– 0 – 4.5V DC when control is

– 0 – 3.3V DC when control is

– 0 – 4.8V DC when control is

■Input Impedance —

❑6800 ohms to 15V DC when con-

trol is powered by AC line

❑6800 ohms to 10V DC when con-

trol is powered by DC supply

■Input Current: 20 mA peak, 3 mA

steady state

■Input Response —

❑High State (Logical “1”, sensor off

or contact open)

– High Speed (Low Speed

jumpers not connected)

– 110 μS minimum at 15V DC

(6,800 ohms to +DC)

– 160 μS minimum at 13.5V DC

(50,000 ohms to +DC)

❑High State (Logical “1“, sensor off

or contact open)

– Low Speed (Low Speed

jumpers connected)

– 5.5 mS minimum at 15V DC

(6,800 ohms to +DC)

– 7.5 mS minimum at 13.5V DC

(50,000 ohms to +DC)

❑Low State (Logical “0”, sensor on

or contact closed)

– High Speed (Low Speed

jumpers not connected)

– 20 μS minimum at 0.1V DC

(0 ohms to DC Common)

– 45 μS minimum at 1.5V DC

(500 ohms to DC Common)

❑Low State (Logical “0”, sensor on

or contact closed)

– Low Speed (Low Speed

jumpers connected)

– 1.0 mS minimum at 0.1V DC

(0 ohms to DC Common)

– 2.0 mS minimum at 1.5V DC

(500 ohms to DC Common)

Scale Factor

■Range: 5 digits (0.0001 to 9.9999)

Control Inputs

■Input Voltage —

❑High State (Logical “1”, contact

open) 15V DC maximum

❑Low State (Logical “0”, contact

closed) 1.2V DC maximum

■Input Impedance: 4.75K ohms to

+5V DC.

■Threshold —

❑High: +3.5 to +22V DC

❑Low: +0.0 to +1.0V DC

■Response Time —

❑Min. High: 5.3 mS

❑Min. Low: 3.9 mS

Note: The reset and unlatch signals will

both occur in less than 200 microseconds

after the input signal is detected. The start

of the print will occur within 2 milliseconds

after the input is detected if the unit is not

counting.

Cat. No. 58811400

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

President Series — Durant®

Diagnostic Modes

■ROM Checksum

■RAM Bit Test

■NVRAM Read/Write Test

■NVRAM Store Test

■NVRAM Checksum

■Watchdog Timer

■Display and LED Indicator Test

Communications

■Interface Type: Dual port 20 mA

current loop

■Speed: 110, 300 and 1200 Baud, user

selectable

■Data Type: Standard ASCII code

■Format: Start bit, 7 ASCII data bits,

Parity bit, one or two Stop bits (Even

parity for Serial Data Output, no

parity for Serial Data Input)

■Information Transmitted —

❑Count value

❑Offset value

❑Scale Factor

■Information Received —

❑Print request

❑Offset value

❑Scale Factor

Product Selection

Table 33. Product Selection — President Series Totalizers

Dimensions

Figure 42. President Series Totalizers — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

115/230V AC, LED Red Display

115/230V AC, LED Red Display, 1/Tau Ratemeter

58811400

58815400

12345

67890

Count

19 20

IN OUT

21 22 23 24 25

115/230V~

50/60 Hz

26 27 28 29 30 31 32 33 34 35 36

1234

USE

EXTERNAL

FUSE!

IN1 IN2

5 6 7 8 9 101112131415161718

Offset

Count

Durant

Preset 1

Reset

Function

Enter

0.95 ±0.04

(24.1 ±1.0)

5.53 ±0.015 (140.5 ±0.4)

5.78 ±0.02 (146.8 ±0.5)

5.91 ±0.03 (150.1 ±0.8)

5.80 ±0.015 (147.3 ±0.4)

5.433 ±0.04

(138 ±1.0)

Recommended

Panel Cutout

2.677 ±0.03

(68 ±0.7)

3.04 ±0.015

(77.2 ±0.4)

0.735 ±0.02

(18.7 ±0.5)

2.62 ±0.025

(66.67 ±0.6)

5.38 ±0.02 (136.7 ±0.5)

6.25 ±0.02 (158 ±0.5)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

President Series — Durant®

Features

■8-digit, LED display, 0.56" (14 mm)

■15V DC @ 100 mA output power

■Rear panel screw terminals

■NEMA 4 front panel

Standards and Certiﬁcations

■UL Listed, CSA marked

■CE Marked

Technical Data and

Speciﬁcations

Power Requirements

■AC Operation: 115/230V AC

(+10%, -20%) 47 – 63 Hz

■DC Operation: 11 – 28V DC

■Power: 18 watts

DC Power Output

■15V DC (+1, -2)

■150 mA if powered from AC or less

than 24V DC

■100 mA if powered from 24V DC or

greater

Note: DC power output is only regulated

if unit is powered by AC or greater than

18.5V DC.

Environment

■Operating Temperature: 32 to 130°F

(0 to 55°C)

■Storage Temperature: -40 to 160°F

(-40 to 70°C)

■Operating Humidity: 85% non-

condensing relative

Physical

■Memory Types: PROM, RAM, Non-

volatile NVRAM

Counter

■Count Range: 8 digits (0 to

99,999,999) with rollover

■Offset Range: 8 digits (0 to

99,999,999) (Offset is entered

through serial communication only.

It is used to reset to a non-zero

number.)

■Count Modes —

❑Count with Add and Subtract

inputs

❑Count with Up/Down direction

input (Hardware doubling for

above modes is provided)

❑Count with Count Inhibit input

❑Quadrature

❑Doubled Quadrature

■Count Speed

❑0 to 10,000 counts per second

(CPS) with Durant Shaft Encoders

or solid-state sensors with

internal pull-up resistor

❑0 to 7,500 CPS minimum for

sensors with open collector

transistor output

❑0 to 5,000 CPS when hardware

doubling is implemented

❑

0 to 150 CPS when Low Frequency

is selected

Count Input Ratings

The count inputs are designed to work

with current sinking sensors (open-

collector NPN transistor output with or

without passive pull-up resistor) or

contact closures to DC Common.

■Input Voltage —

❑High state (Logical “1“, sensor off

or contact open)

– 10.5 – 24.5V DC when control is

– 7.0 – 24.5V DC when control is

– 11.0 – 24.5V DC when control is

❑Low state (Logical “0”, sensor on

or contact closed)

– 0 – 4.5V DC when control is

– 0 – 3.3V DC when control is

– 0 – 4.8V DC when control is

■Input Impedance —

❑6800 ohms to 15V DC when con-

trol is powered by AC line

❑6800 ohms to 10V DC when con-

trol is powered by DC supply

■Input Current: 20 mA peak, 3 mA

steady state

■Input Response —

❑High State (Logical “1”, sensor off

or contact open)

– High Speed (Low Speed

jumpers not connected)

– 110 μS minimum at 15V DC

(6,800 ohms to +DC)

– 160 μS minimum at 13.5V DC

(50,000 ohms to +DC)

❑High State (Logical “1“, sensor off

or contact open)

– Low Speed (Low Speed

jumpers connected)

– 5.5 mS minimum at 15V DC

(6,800 ohms to +DC)

– 7.5 mS minimum at 13.5V DC

(50,000 ohms to +DC)

❑Low State (Logical “0”, sensor on

or contact closed)

– High Speed (Low Speed

jumpers not connected)

– 20 μS minimum at 0.1V DC

(0 ohms to DC Common)

– 45 μS minimum at 1.5V DC

(500 ohms to DC Common)

❑Low State (Logical “0”, sensor on

or contact closed)

– Low Speed (Low Speed

jumpers connected)

– 1.0 mS minimum at 0.1V DC

(0 ohms to DC Common)

– 2.0 mS minimum at 1.5V DC

(500 ohms to DC Common)

Control Inputs

■Impedance: 4.75k ohms to +5V DC

■Threshold —

❑High: +3.5 to +22V DC

❑Low: +0.0 to +1.0V DC

Response Time —

❑Min. High: 5.3 mS

❑Min. Low: 3.9 mS

Note: The reset and unlatch signals will

both occur in less than 200 microseconds

after the input signal is detected. The start

of the print will occur within 2 milliseconds

after the input is detected if the unit is not

counting.

Counter Operating Modes

■Reset —

❑Reset to zero

❑Reset to offset value

■Maintained Reset

■Momentary Reset

Cat. No. 58810400

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

President Series — Durant®

Communications

■Interface Type: Dual port 20 MA

current loop

■Speed: 110, 300 and 1200 Baud, user

selectable

■Data Type: Standard ASCII code

■Format: Start bit, 7 ASCII data bits,

Parity bit, one or two Stop bits (Even

parity for Serial Data Output, no

parity for Serial Data Input)

■Information Transmitted —

❑Count value

❑Offset value

■Information Received —

❑Print request

❑Offset value

❑Print offset enable or disable

Product Selection

Table 34. Product Selection — President Series Totalizers

Dimensions

Figure 43. President Series Totalizers — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

115V AC, 7-digit LED Red Display, Basic Pulse Count

115/230V AC, LED Red Display

Feet/Inches Totalizer

57810400

58810400

57810402

5.43 ±0.04

(138 ±1.0)

Recommended

Panel Cutout

1.77 ±0.025

(45 ±0.6)

Durant

Reset

5.80 ±0.015 (147.3 ±0.4)

2.16 ±0.015

(54.9 ±0.4)

5.53 ±0.015 (140.5 ±0.4)

0.17 ±0.01 (4.3 ±0.24)

1.74 ±0.01

(44.20 ±0.25)

IN OUT IN1

34567

115/230V~

50/60 Hz

8 9 10 11 12 13 14 15 16 17 18

SWA SWB

IN2

12345678 12345

5.38 ±0.015 (136.7 ±0.4)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

Ambassador Series — Durant®

Features

■AC/DC powered, 2-line LCD display

■8-digit totalizer

■1/Tau ratemeter

■Totalizer and ratemeter scaling

■Four user-conﬁgurable control

inputs

■Two solid-state outputs

■RS-485 Serial communications

Standards and Certiﬁcations

■UL Listed

■CE Marked

Technical Data and

Speciﬁcations

Power Input

■AC Operation —

❑115V AC (±15%) std., 50 to 60 Hz,

❑230V AC (±15%) opt., 50 to 60 Hz,

■DC Operation: 10 – 15V DC opt.,

300 mA maximum

DC Power Output

■12V DC (±25%), 100 mA maximum

(includes all line and load

variations)

Environmental

■Operating Temperature: 32 to 131°F

(0 to 55°C)

■Storage Temperature: -4 to 158°F

(-20 to 70°C)

■Operating Humidity: 85% Relative,

non-condensing

■NEMA 4 rating when mounted with

gasket provided

Cat. No. 57600400

Totalizer

■Type: Bi-directional

■Digits: 8

■Scaler Range: 0.00001 to 9.99999

■Decimal Point: 5 positions,

programmable

Totalizer Count Speeds

The maximum count speed depends

on the selected count mode. All

maximum speeds are shown with

square waves (50% duty cycle) input.

■Maximum Speed — Solid-State

(High Speed)

❑Mode Input A/ Input B —

Add/Sub: 20 kHz

Add/Add: 20 kHz

Count/Direction: 15 kHz

Count x 2/Direction: 7.5 kHz

Quadrature: 6.5 kHz

Quadrature x 2: 6.5 kHz

■Maximum Speed — Contact (Low

Speed)

❑Mode Input A/ Input B —

Add/Sub: 40 kHz

Add/Add: 40 kHz

Count/Direction: 40 kHz

Count Inputs

■Sink —

❑Impedance: 4.6k ohms to +5V DC

❑Voltage —

High: 3.5 to 34.0V DC

Low: 0.0 to 1.9V DC

■Source (high) —

❑Impedance: 2.3k ohms to

common

❑Voltage —

High: 3.5 to 17.0V DC (100% duty

cycle)

Low: 0.0 to 1.9V DC

■Source (low) —

❑Impedance: 2.3k ohms to

common

❑DC Voltage —

High: 0.6 to 17.0V DC

Low: -17.0 to -0.6V DC

❑AC Voltage: 17V AC (48V Peak-

Peak) maximum

Control Inputs

■Impedance: 4.7k ohms to +5V DC

■Voltage —

❑High: +3.7 to +24V DC

❑Low: 0.0 to 0.9V DC

■Response: Minimum low 15 mS,

minimum high 15 mS

Transistor Outputs (2)

■Type: NPN open collector with tran-

sient protection

■Maximum Voltage (OFF state):

30V DC

■Maximum Current (ON state):

200 mA @ 1.3V DC

Communication

■Type: RS-485

■Format: 1 start bit, 7 data bits

(ASCII), 1 parity bit, 1 stop bit

■Protocol: Opto-22 compatible

■Speed: 300, 1200, 2400, 4800, 9600

and 19200 baud

■Parity: Odd, Even, None (space

transmitted, ignore received)

Count Accuracy

■100% when operated within the

speciﬁed count speeds and count

signal high and low times

Rate Indicator

■Type: 1/Tau

■Digits: 6

■Scaler Range: 0.00001 to 99999

■Decimal Point: 5 positions,

programmable

■Accuracy: ± 0.015% of reading

■Update Time: 1 second, ﬁxed

■Zero Time: 10 seconds, ﬁxed

Connections

■Type: Dual depluggable screw

terminal strips

■Conductor Size: 14 – 22 AWG

(2.1 – 0.38 mm2), 600V, solid,

stranded or fused (preferred)

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Electronic Totalizers

Ambassador Series — Durant®

Product Selection

Table 35. Product Selection — Ambassador Series Totalizers

Dimensions

Figure 44. Ambassador Series Totalizers — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

10 – 15V DC LCD

115V AC LCD

230V AC LCD

57600400

57601400

57602400

2.946 ±0.015

(74.83 ±0.38)

C 123456

P1 10000

2.946 ±0.015

(74.83 ±0.38)

2.677 ±0.028

(68.00 ±0.70)

2.677 ±0.028

(68.00 ±0.70)

Panel Cutout

Max. Panel

Thickness

0.50 (12.7)

5.60 ±0.03

(142.24 ±0.76)

RST

CLR

RUN

PGM

PRNT

•

EXIT ENT SEL

Durant®

Gasket

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Controls/Preset Counters

Product Family Overview

Introduction

Count controls are counters that provide output signal(s) at

preset count value(s). Typical applications include cut-to-

length, batching, ﬁlling, mixing and dispensing. Available

from Eaton are a variety of count controls in different sizes,

display types and feature sets.

Application Example

The illustration shows a simple cut-to-length application.

The roll of paper is measured using a measuring wheel and

rotary contactor (or encoder). Once the desired length is

reached, an output signal may be directed to a shear for

activation. Following the cut-off, the count control will reset

to zero and begin measurement of the next piece. Options

such as batch counting, where the number of cut pieces is

counted, are also typical of this application.

Count Control Product Family Overview

Table 36. Product Family Overview

Rotary Contactor

Roll

Paper

Measuring

Wheel

Application Example

Product Family Characteristics Panel Cutout

in Inches (mm)

Page

Number

■Low cost, simple count control

■Various power options: battery, AC, DC

■Easy-to-change preset values

■2-line display: input and preset values

1.772 x 1.772

(45 x 45)

■6-digit, super bright LED display

■Multiple models available: totalizers, ratemeters, count controls,

digital panel meters and ﬂow controls

1.772 x 1.622

(45 x 92)

■6-digit, high-visibility, 2-line LCD display

■User-conﬁgurable control inputs

■Highly ﬂexible control/display

2.667 x 2.667

(68 x 68)

■Bright LED display w/14 mm characters

■Simple conﬁguration with 14-button tactile keypad

■Many different versions ﬁt almost any application

2.667 x 5.433

(68 x 138)

■Integrated controller combines operator interface, ladder logic

and high-speed counting

2.667 x 5.433

(68 x 138)

■Various price, voltage and size ranges for different duty cycles

and environments

■Long life and always readable display

Various Mounting

Conﬁgurations

E5-148-C

Eclipse

Ambassador

President

Fusion

Electromechanical

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Count Control

1/16 DIN Battery Powered LCD Count Control

Contents

Description Page

Count Control

1/16 DIN Battery Powered

LCD Count Control . . . . . 37

1/16 DIN LCD Count

Control . . . . . . . . . . . . . . . 39

Eclipse Series . . . . . . . . . . 41

Ambassador Series . . . . . . 43

President Series . . . . . . . . 46

PD-Q and PD-ER

Series . . . . . . . . . . . . . . . . 50

Features

■Replacement for electromechanical

preset counters

■No power supply necessary (battery

operated)

■Count and reset input electrically

separated from counter through

optocoupler input range 12 – 250V

AC/DC

■2-line LC display count, preset and

level of the output

■Screw terminal

■Data security, through two

exchangeable lithium batteries,

lifetime minimum 8 years

■Easy programming

■Counter presets easily via presetting

keys allocated to each decade

■Output: Potential free relay,

programmable normally open or

normally closed contact

Cat. No. E5-148-C1400

Standards and Certiﬁcations

■cRU®us Approval

■CE Marked

Technical Data and Speciﬁcations

■Power Supply: 2 pcs user

exchangeable lithium batteries,

Type 1/2 AA lithium 3.6V

■Display: 2-line LCD display, 6 digits;

999999, height of ﬁgure 0.28 Inch

(7 mm) or 0.18 Inch (4.5 mm)

■Input: Reset, count and key lock

inputs

■Polarity of the Inputs: Bidirectional

optocoupler input for the reset

count inputs; reset, count and

keyboard lock is connected to 3V DC

■Min. pulse duration of the Inputs:

Reset input 50 mS; keyboard lock

input 15 mS

■Switching Levels of the Inputs —

❑Low: <3V AC/DC

❑High: 12 – 250V AC/DC

■Input Frequency: Max. 25 Hz

■Input Resistance: 110 k1

■Output: Bistable relay with potential

free contact (programmable as

normally closed or normally open

contact)

■Max. Switching Voltage: 250V AC/

220V DC

■Max. Switching Current: 2A

■

Max. Switching Capacity: 60 VA/30W

■Output Response Time: <20 mS,

max. 4 Hz

■Data Retention: Via 2 batteries, 8

years or 5x106 power operations of

the output relay and an ambient

temperature of 77°F (25°C)

■Ambient Temperature: 14 to 122°F

(-10 to 50°C)

■Storage Temperature: -13 to 140°F

(-25 to 60°C)

■EMC: According to EC EMC directive

89/36/EWG,

EN 61 000-6-4/

EN 55011

Class B, EN 61 000-6-2

■Protection: IP65 (front)

■Weight: Approx. 2.82 oz (80 g)

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Control

1/16 DIN Battery Powered LCD Count Control

Product Selection

Table 37. Product Selection — 1/16 DIN Battery Powered LCD Count Control

Dimensions

Figure 45. 1/16 DIN Battery Powered LCD Count Control — Approximate Dimensions in

Inches (mm)

Description Catalog

Number *

1 Preset Count Control

Battery Power 1.89 x 1.89 Inch (48 x 48 mm) E5-148-C1400

648.732

850.000

123456 7

648.732

850.000

648.732

850.000

1.89

(48.0)

1.89

(48.0)

SQ 1.77

(45)

Max. 0.41

(10.5)

2.49

(63.2)

0.63

(16.0)

0.12

(3.0)

2.17

(55.0)

2.17

(55.0)

SQ 1.77

(45)

SQ 1.97

(50)

Max. 0.37

(9.5)

2.45

(62.2)

0.63

(16.0)

0.16

(4.0)

2.95

(75.0)

Flush Bf4, DIN 74

2.36

(60.0)

SQ 1.77

(45)

2.48

(63)

SQ 1.97

(50)

Max. 0.37

(9.5)

2.45

(62.2)

0.63

(16.0)

0.16

(4.0)

Panel Cut-Out 1.77 x 1.77 (45 x 45)

With Front Bezel No. 2

Panel Cut-Out 1.97 x 1.97 (50 x 50)

With Front Bezel No. 3

Panel Cut-Out 1.97 x 1.97 (50 x 50)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Count Control

1/16 DIN LCD Count Control

Features

■2-Line LCD display

■Programmable as impulse counter,

frequency meter or time meter with

sign and zero blanking

■Power Supply: 90 – 260V AC or

10 – 30V DC

■Batch mode

■Display range -199.999 – 999.999

with zero blanking

■Easy to operate and set the preset

values via 4 keys

■Relay or octocoupler-output

■Scaling factor 0.0001 – 9.9999

❑1 preset value, 1 output

❑2 preset values, 2 outputs

Standards and Certiﬁcations

■cRU®us Approval

■CE Marked

Cat. No. E5-148-C2421

Technical Data and Speciﬁcations

■Supply Voltage: 10 – 30V DC

with reverse polarity protection;

90 – 260V AC max. 4 VA

■Display: 2-line LCD display, 6-digits

■Count Inputs: 2 count inputs, 4 input

modes are programmable

■Polarity of the Inputs:

Programmable for all inputs in

common

■Input Resistance: Approx. 10 k1

■Count Frequency: 10 kHz via DIP-

switches reducible for INP A and

INP B to 30 Hz (0.7 kHz at input

mode E3 and E4 phase

discriminator), automatic repeat at

900 Hz without losing counts (500 Hz

for input mode E4)

■Min. Pulse Duration of the Inputs:

5 mS

■Input Sensitivity —

DC Supply Voltages

❑High: 0.6 x UB – 30V DC

❑Low: 0 – 0.2 x UB [VDC]

AC Supply Voltages

❑High: 12 – 30V DC

❑Low: 0 – 4V DC

■Pulse Shape: Variable (Schmitt-

Trigger characteristics)

■Output 1: Relay —

❑With potential free contact, pro-

grammable as normally open or

normally closed

❑Switching voltage max.: 250V AC/

125V DC

❑Switching current max.: 3A

❑Switching current at DC min.:

30 mA

❑Switching power at DC: 90W

❑Switching power at AC max.:

750 VA

NPN Optocoupler —

❑With open collector and emitter

switching power 30V DC/15 mA

■Output 2: Relay —

❑With potential free contact, pro-

grammable as normally open or

normally closed

❑Switching voltage max.: 250V AC/

125V DC

❑Switching current max.: 3A

❑Switching current at DC min.:

30 mA

❑Switching power at DC: 90W

❑Switching power at AC max.:

750 VA

NPN Optocoupler —

❑With open collector and emitter

switching power 30V DC/15 mA

■Reaction Time of the Inputs —

❑Relay: Approx. 7 mS

❑Optocoupler: Approx. 1 mS

■Data Retention: Min. 10 years or

1x106 memory cycles

■Transmitter Voltage: 24V DC -40%/

±15%. 100 mA at 90 – 250V AC

❑With optional backlight —

24V DC -40% ±15%. 60 mA at

90 – 260V AC

■Ambient Temperature: 32 to 122°F

(0 to 50°C)

■Storage Temperature: -13 to 158°F

(-25 to 70°C)

■EMC: According to EC EMC directive

89/36/EWG,

EN 61 000-6-4/

EN 55011

Class B, EN 61 000-6-2

■Protection: IP65 (front)

■Weight: Approx. 8.47 oz (240 g), AC

version with relay

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Control

1/16 DIN LCD Count Control

Product Selection

Table 38. Product Selection — 1/16 DIN LCD Count Control

Dimensions

Figure 46. 1/16 DIN LCD Count Control — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

1 Preset LCD Count Control

90 – 260V AC Power 1.89 x 1.89 Inch (48 x 48 mm)

10 – 30V DC Power 1.89 x 1.89 Inch (48 x 48 mm)

E5-148-C1421

E5-148-C1422

2 Preset LCD Count Control

90 – 260V AC Power 1.89 x 1.89 Inch (48 x 48 mm)

10 – 30V DC Power 1.89 x 1.89 Inch (48x 48 mm)

E5-148-C2421

E5-148-C2422

-903.682

-903.250

PR1

123456 7

1.89

(48.0)

1.89

(48.0)

SQ 1.77

(45)

Max. 0.41

(10.5)

3.40

(86.5)

Panel Cut-Out 1.77 x 1.77 (45 x 45)

0.61

(15.5)

0.12

(3.0)

-903.682

-903.250

PR1

123456 7

2.17

(55.0)

2.17

(55.0)

SQ 1.77

(45)

SQ 1.97

(50)

Max. 0.37

(9.5)

3.37

(85.5)

0.61

(15.5)

0.12

(4.0)

With Front Bezel No. 2

Panel Cut-Out 1.97 x 1.97 (50 x 50)

-903.682

-903.250

PR1

123456 7

2.95

(75.0)

Flush Bf4, DIN 74

2.36

(60.0)

SQ 1.77

(45)

2.48

(63)

SQ 1.97

(50)

Max. 0.37

(9.5)

3.37

(85.5)

0.61

(15.5)

0.16

(4.0)

With Front Bezel No. 3

Panel Cut-Out 1.97 x 1.97 (50 x 50)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Count Control

Eclipse Series — Durant®

Features

■1/8 DIN cutout

■NEMA 4X front panel

■Universal AC power supply

(85 – 265V AC)

■DC power models (9 – 30V DC)

■Removable screw terminals

■Short Depth: 3.6 inch (91 mm)

■Front panel programming

Standards and Certiﬁcations

■UL and cUL Listed, CE Marked

Technical Data and

Speciﬁcations

Mechanical

■Cutout Dimensions:

3.62" W x 1.77" H (92 mm x 45 mm)

DIN standard

■Outline Dimensions:

4.04" W x 2.19" H x 3.87" D

(103 mm x 56 mm x 98 mm)

3.60" (92 mm) maximum depth in

panel

■Enclosure: Plastic with polyester

front label

■Connectors: Up to six depluggable

terminal blocks

Environmental

■Operating Environment: Indoor use

to 2000 meters

■Temperature —

❑Operating: 32 to 122°F (0 to 50°C)

❑Storage: -4 to 158°F (-20 to 70°C)

■Humidity: 0 to 85% RH, non-

condensing

■Vibration: 2.5 Gs, 30 to 200 Hz

■Shock: 30 Gs, 11 mS half sinewave

■EMC —

❑Immunity to EN 50082-2 (Heavy

Industrial)

❑Emissions to EN 50081-2 (Heavy

Industrial)

■Front Panel: NEMA 4X when

mounted with gasket provided

■CE EMC immunity and emissions

requirements were met using

shielded wiring on the RS-485,

analog output and pulse input/

power lines. The shields were

connected to earth ground at the

Eclipse end of the shields.

■Pollution Degree 2: Overvoltage

category II

Input Power

■AC Powered Models (57701-4XX) —

❑Input Power: 85 – 295V AC,

47 – 63 Hz, 20V A

❑External Fuse: 0.2A, 250V AC,

Time Delay (T200 mA, 250V)

❑Isolation Dielectric Strength:

2300V AC

■DC Powered Models (57700-4XX) —

❑Input Power: 9 – 30V DC, 12V A

❑External Fuse: 2.0A, 50V DC, Time

Delay (T2A, 50V)

❑Reverse Voltage Protection: Yes

❑Isolation Dielectric Strength:

2300V AC to signal outputs and

relays, 500V AC to RS-485 and

analog outputs

Human Interface

■Display: +6, -5 digits

■Type: 0.56" (14.2 mm) high, seven

segment, red LED

Data Retention

■Memory Type: EEPROM, no batter-

ies required

■Duration: 100 years

Count Signal Input

■Sensor Type: Sink or source, DIP

switch selectable

■Input Impedance: 4.75k ohms to

+5V DC or 34.9k ohms to ground

■Thresholds —

❑High: 3.5 – 28V DC

❑Low: 0 – 1.9V DC, for single ended

signals

■Magnetic Pickup Range: 200 mV p-p

to 65 VRMS into 34.9k ohms

■Slow Response: 200 Hz max. (DIP

switch 2 and/or 5 ON)

■Fast Response — Count Mode:

A or B

❑Add/Add, Add/Subtract, Add w/

Inh: 8250/8250

■Fast Response — Count Mode:

A and B

❑Add/Add, Add/Subtract, Add w/

Inh: 3000/3000

❑Quad x1, Quad x2: 3250

❑Quad x4: 2000

Control Inputs

■Sensor Type: Sink only

■Input Impedance: 4.75k ohms to

+5V DC

■Thresholds —

❑High: 3.5 to 28V DC

❑Low: 0 – 1.9V DC

■Response: 25 mS maximum

(5V signal)

Accessory Power Output

■Voltage: 12V DC +10%/-13%

■Current: 75 mA max.

■Protection: Short circuit protected

Cat. No. 57700481

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Control

Eclipse Series — Durant®

Product Selection

Table 39. Product Selection — LED Count Control, 6-digit

Dimensions

Figure 47. Eclipse Series Count Control — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Relay Out, 9 – 30V DC Power

Relay Out, 85 – 265V AC Power

57700481

57701481

Relay & Analog Out, 9 – 30V DC Power

Relay & Analog Out, 85 – 265V AC Power

57700483

57701483

Relay & RS-485 Out, 9 – 30V DC Power

Relay & RS-485 Out, 85 – 265V AC Power

57700485

57701485

Relay, Analog & RS-485 Out, 9 – 30V DC Power

Relay, Analog & RS-485 Out, 85 – 265V AC Power

57700487

57701487

Durant

3.622 ±0 .03

(92.00 ±0.8)

Panel Cutout

Max. Panel Thickness 0.190 (4.83)

4.04

(102.6)

PGM

3.31

(84.1)

3.63

(92.2)

0.27

(6.9)

2.19

(55.6) 1.772 ±0.02

(45 ±0.6)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Count Control

Ambassador Series — Durant®

Features

■AC/DC powered, 2-line LCD display

■8-digit totalizer

■1/Tau ratemeter

■Totalizer and ratemeter scaling

■Four user-conﬁgurable control

inputs

■Up to two output relays

■Two solid-state outputs

■RS-485 Serial communications

■Feet/Inches control available

Standards and Certiﬁcations

■UL Listed

■CE Marked

Technical Data and

Speciﬁcations

Power Input

■AC Operation —

❑115V AC (±15%) std., 50 to 60 Hz,

❑230V AC (±15%) opt., 50 to 60 Hz,

■DC Operation: 10 – 15V DC opt.,

300 mA maximum

DC Power Output

■12V DC (±25%), 100 mA maximum

(includes all line and load varia-

tions)

Environmental

■Operating Temperature: 32 to 131°F

(0 to 55°C)

■Storage Temperature: -4 to 158°F

(-20 to 70°C)

■Operating Humidity: 85% Relative,

non-condensing

■NEMA 4 rating when mounted with

gasket provided

Main Counter

■Type: Bi-directional

■Digits: 6

■Presets: Varies by Model

■Reset modes: Auto or manual reset

to zero or preset

■Scaler Range: 0.00001 to 9.99999

■Decimal Point: 5 positions, (6 on 4-

preset models)

■Output Latency: See Table 40

Batch Counter

■Type: Increment with main counter

recycle or ﬁnal preset signal

■Digits: 6

■Presets: 1

■Output Latency: < 1 mS

Totalizer

■Type: Bi-directional, same or

opposite of main counter

■Digits: 8

■Scaler: Shared with main counter

■Decimal Point: Tracks main counter

Count Input Speeds

■See Tables 42 and 43

Count Inputs

■Sink —

❑Impedance: 4.6k ohms to +5V DC

❑Voltage —

High: 3.5 to 34.0

Low: 0.0 to 1.9V DC

■Source (high) —

❑Impedance: 2.3k ohms to

common

❑Voltage —

High: 3.5 to 17.0V DC (100% duty

cycle)

Low: 0.0 to 1.9V DC

■Source (low) —

❑Impedance: 2.3k ohms to

common

❑DC Voltage —

High: 0.6 to 17.0V DC

Low: -17.0 to -0.6V DC

❑AC Voltage: 17V AC (48V Peak-

Peak) maximum

Control Inputs

■Impedance: 4.7k ohms to +5V DC

■Voltage —

❑High: +3.7 to +24V DC

❑Low: 0.0 to 0.9V DC

❑Response: Minimum low 15 mS,

minimum high 15 mS

Relay Outputs

■Type: SPDT contacts

■UL Ratings: 250V AC, 360V A Pilot

Duty

Transistor Outputs (2)

■Type: NPN open collector with tran-

sient protection

■Maximum Voltage (OFF state):

30V DC

■Maximum Current (ON state):

200 mA @ 1.3V DC

Communication

■Type: RS-485

■Format: 1 start bit, 7 data bits

(ASCII), 1 parity bit, 1 stop bit

■Protocol: Opto-22 compatible

■Speed: 300, 1200, 2400, 4800, 9600

and 19200 baud

■Parity: Odd, Even, None (space

transmitted, ignore received)

Rate Indicator (Not available on models

57601-415 and 57601-485)

■Type: 1/Tau

■Digits: 6

■Presets: 2

■Scaler Range: 0.00001 to 99999

■Decimal Point: 5 positions,

programmable

■Accuracy: ±0.015% of reading

■Update Time: See Table 41

■Zero Time: See Table 41

Connections

■Type: Dual depluggable screw

terminal strips

■Conductor Size: 14 – 22 AWG

(2.1 – 0.38 mm2), 600V, solid,

stranded, or fused (preferred)

Cat. No. 57601401

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Control

Ambassador Series — Durant®

Table 40. Output Latency for Ambassador Control

Table 41. Rate Indicator Specs for Ambassador Control

Table 42. Ambassador Count Input Speeds — 5760X405, 5760X415 

Contact inputs = 40 Hz; B Direction inputs = 40 Hz and B Reset input =

10 μS Min. Low. Input A not active on Feet/Inches control.

Table 43. Ambassador Count Input Speeds — 5760X401, 5760X402,

5760X403, 5760X404

The maximum count speed depends on the selected count mode. All

maximum speeds are shown with square waves (50% duty cycle)

input.

Style Number Output Latency

5760X401

5760X402

5760X403

0.7 to 2 mS

0.7 to 2.7 mS

5760X404

5760X405

5760X415

0.7 to 2.7 mS

< 1 mS

Style Number Update Time Zero Time

5760X401

5760X402

5760X403

1 second, ﬁxed

10 seconds, ﬁxed

5760X404

5760X405

5760X415

1 second, ﬁxed

0.1 to 99.9 sec,

programmable

0.1 to 999.9 sec,

programmable

10 seconds, ﬁxed

0.1 to 99.9 sec,

programmable

0.1 to 999.9 sec,

programmable

Solid-State A or B A and B

A - B

A + B

-A + B

8250/8250

8000/8000

3000/3000

4000/4000

3000/3000

A, B Dir

2A, B Dir

A, B Rst

8000/40

4500/40

8250

—

Quad x 1

Quad x 2

Quad x 4

—

3250

2000

Tot A/Cnt B

Tot + Cnt B

14000/9000

16000/8500

6500/6500

Mode

Input A/B

Maximum Speed 

Solid-State

(High Speed)

Contact

(Low Speed)

Add/Sub

Add/Add

20 kHz

40 kHz

Count/Direction

Count x 2/Direction

15 kHz

7.5 kHz

40 kHz

—

Quadrature

Quadrature x 2

6.5 kHz

—

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Count Control

Ambassador Series — Durant®

Product Selection

Table 44. Product Selection — Ambassador Series Count Control

Dimensions

Figure 48. Ambassador Series Count Control — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Single Preset with Rate, 115V AC

Single Preset with Rate, Batch and Totalizer, 115V AC

57601401

57601402

Dual Preset with Rate, 115V AC

Dual Preset with Rate, Batch and Totalizer, 115V AC

57601403

57601404

Four Preset with Rate, Batch and Totalizer, 10 – 15V DC

Four Preset with Rate, Batch and Totalizer, 115V AC

Four Preset with Rate, Batch and Totalizer, 230V AC

57600405

57601405

57602405

Feet/Inches Control, 115V AC

Feet/Inches Control, 230V AC

57601415

57602415

2.946 ±0.015

(74.83 ±0.38)

C 123456

P1 10000

2.946 ±0.015

(74.83 ±0.38)

2.677 ±0.028

(68.00 ±0.70)

2.677 ±0.028

(68.00 ±0.70)

Panel Cutout

Max. Panel

Thickness

0.50 (12.7)

5.60 ±0.03

(142.24 ±0.76)

RST

CLR

RUN

PGM

PRNT

•

EXIT ENT SEL

Durant®

Gasket

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Control

President Series — Durant®

Features

■5- or 6-digit, LED display,

0.56" (14 mm)

■1, 2 or 3 presets

■15V DC @ 100 mA output power

■Rear panel screw terminals

■20 mA current loop communications

■2 Form C relays

■Tactile keypad NEMA 4 front panel

Standards and Certiﬁcations

■UL Listed, CSA marked

■CE Marked

Technical Data and Speciﬁcations

Table 45. President Series — Count Control Speciﬁcations

DC power output is only regulated if unit is powered by AC or greater than 18.5V DC.

Cat. No. 58831400

Description Model

57820400 57820401 58821400 58825400 58831400

AC Power Requirements 120V ±10% 240V ±10% 120V/240V +10%/-20%, 47 – 63 Hz

DC Power Requirements 11 – 30V DC 11 – 28V DC

Power Consumption 8 Watts max. 18 Watts maximum

DC Power Output 15V DC +1/-2 @ 85 mA max. 15V DC +1/-2; 150 mA if powered from AC or less than 24V DC,

100 mA if powered from 24V DC or greater

Operating Temperature 32 to 130°F (0 to 55°C)

Operating Humidity 85% relative, non-condensing

Storage Temperature -10 to 160°F (-40 to 71°C)

Front Panel Rating NEMA 4 rating when mounted with gasket provided

Main Counter Scaler Range N/A 5 Digits (0.0001 to 9.9999)

Count Input Frequency 10 kHz

(5 kHz in Quadrature)

See

Table 46

See

Table 52

See

Table 47

Count Input Impedance 6.8 k1 to 15V DC when control is powered by AC line;

6.8 k1 to 10V DC when control is powered by DC line

Control Input Threshold High 10.5 to 24.5V DC;

Low 0.0 to 4.5V DC when powered by AC

Control Input Impedance 4.5 k1 to +5V DC

Control Input Response Time Min. High 5.3 mS; Min. Low 3.9 mS

Relay Contact Output Ratings SPDT Form C; 10 amps resistive @ 24V DC or 230V AC; 1/3 hp @ 115V AC or 230V AC;

150V DC max switched voltage; 5,000,000 operations mechanical life, 100,000 operations at resistive rating

Transistor Output Ratings Open collector NPN transistor with Zener diode transient surge protection;

30V DC max. load; 300 mA max. per transistor; 480 mA total for all transistors.

Use 5 mA per relay coil when calculating total transistor current

Communications N/A Dual Port 20 mA current loop, Standard ASCII code

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Count Control

President Series — Durant®

Table 45. President Series — Count Control Speciﬁcations (Continued)

DC power output is only regulated if unit is powered by AC or greater than 18.5V DC.

Table 46. 58821400 Count Frequency Table 47. 58831400, 58841400, 58861400 Count Frequency

Table 48. 58851400 Count Frequency

Description Model

58841400 58851400 58827400 58827410 58867400

AC Power Requirements 120V/240V +10%/-20%, 47 – 63 Hz

DC Power Requirements 11 – 28V DC

Power Consumption 18 Watts max.

DC Power Output 15V DC +1/-2; 150 mA if powered from AC or less than 24V DC,

100 mA if powered from 24V DC or greater

Operating Temperature 32 to 130°F (0 to 55°C)

Operating Humidity 85% relative, non-condensing

Storage Temperature -10 to 160°F (-40 to 71°C)

Front Panel Rating NEMA 4 rating when mounted with gasket provided

Main Counter Scaler Range 5 Digits (0.0001 to 9.9999) 6 Digits

(0.00001 to 9.99999)

Count Input Frequency See

Table 47

See

Table 48

See

Table 49

See

Table 51

See

Table 50

Count Input Impedance 6.8 k1 to 15V DC when control is powered by AC line;

6.8 k1 to 10V DC when control is powered by DC line

Control Input Threshold High 10.5 to 24.5V DC;

Low 0.0 to 4.5V DC when powered by AC

Control Input Impedance 4.5 k1 to +5V DC

Control Input Response Time Min. High 5.3 mS; Min. Low 3.9 mS

Relay Contact Output Ratings SPDT Form C; 10 amps resistive @ 24V DC or 230V AC; 1/3 hp @ 115V AC or 230V AC;

150V DC max switched voltage; 5,000,000 operations mechanical life, 100,000 operations at resistive rating

Transistor Output Ratings Open collector NPN transistor with Zener diode transient surge protection;

30V DC max. load; 300 mA max. per transistor; 480 mA total for all transistors.

Use 5 mA per relay coil when calculating total transistor current

Communications Dual Port 20 mA current loop, Standard ASCII code

Scale Factor Count Speed (Pulses per Second)

Nominal Count Quadrature and/or Doubled Count

< 1.0000 6,250 3,125

1.0000 7,500 3,750

1.9999 5,000 2,500

2.0000 6,250 3,125

9.0000 2,500 1,250

9.9999 2,000 1,000

Scale Factor Count Speed (Pulses per Second)

Nominal Count Quadrature and/or Doubled Count

< 1.0000 5,000 2,500

1.0000 7,500 3,750

1.9999 4,000 2,000

2.0000 6,000 3,000

9.0000 2,000 1,000

9.9999 1,500 750

Scale Factor Count Speed (Pulses per Second)

Function 61 value = “0” Function 61 value = “1”

Nominal Count Quadrature and/or Doubled Count Nominal Count Quadrature and/or Doubled Count

< 1.0000 5,000 2,500 3,500 1,750

1.0000 7,500 3,750 4,500 2,250

1.9999 4,000 2,000 2,400 1,200

2.0000 6,000 3,000 3,600 1,800

9.0000 2,000 1,000 1,100 550

9.9999 1,500 750 1,000 500

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Control

President Series — Durant®

Table 49. 58827400 Count Frequency Table 50. 58867400 Count Frequency

Note: The maximum count input frequency depends only on the

selected count mode (doubled or quadrature x4). The maximum

input frequencies shown are with square wave (50% duty cycle)

input.

Table 51. 58827410 Count Frequency

C1: Counter #1; C2: Counter #2; C3: Counter #3; RM: Ratemeter.

Table 52. 58825400 Count Frequency

Scale Factor Count Speed (Pulses per Second)

Count Up Count Down Quadrature

0.999 4,000 2,250 2,000

1.000 5,000 3,500 3,500

1.999 3,500 2,000 1,250

2.000 4,000 3,000 2,750

9.000 1,500 1,500 1,500

9.999 1,250 1,000 1,000

Count Mode Count Speed (Pulses per Second)

X1 X2 X3

High Speed 30,000 15,000 7,500

Low Speed 200 200 200

Sample Scale Factor Count Speed (Pulses per Second)

Typical Combinations of Features 

C1 = ON

C2 = OFF

C3 = OFF

RM = OFF

C1 = ON

C2 = ON

C3 = OFF

RM = OFF

C1 = ON

C2 = ON

C3 = ON

RM = OFF

C1 = ON

C2 = ON

C3 = OFF

RM = ON

C1 = ON

C2 = ON

C3 = ON

RM = ON

0.0001 – 0.9999 6,000 3,000 2,300 2,600 2,000

1.0000 9,000 4,500 3,500 4,000 3,000

5.0000 4,500 2,250 1,000 2,000 750

9.9999 1,500 1,000 500 750 550

Scale Factor Count Speed (Pulses per Second)

Nominal Count Quadrature and/or Doubled Count

< 1.0000 4,200 2,100

1.0000 7,500 3,750

1.9999 3,450 1,720

2.0000 6,250 3,120

9.0000 2,500 1,250

9.9999 1,800 900

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Count Control

President Series — Durant®

Product Selection

Table 53. Product Selection — President Series Count Control

These models have, in addition to the main count register, a register that may be conﬁgured to be used as either a totalizer or single preset batch

counter. These two functions are mutually exclusive.

The Model 58827-400 has both a totalizer and a batch counter, each with a single preset. In addition, the batch counter may be conﬁgured as an

additional totalizer with control instead of batch counter.

The Model 58827-410 has two completely independent count input channels feeding two independent, single preset count registers. In addition, a third

single preset register may be used as either a totalizer or a batch counter for one or both of the two main counters.

Dimensions

Figure 49. President Series Count Control — Approximate Dimensions in Inches (mm)

Description Features Catalog

Number *

Totalizer Batch

Counter

Rate Scaler Crop-

Cut

Main

Counter

Presets Digits

120V AC, No Communications

240V AC, No Communications

Single Preset

—

✓

—

✓

—

57820400

57820401

58821400

Single Preset with Rate

Dual Preset

Dual Preset with Batch

Dual Preset with Totalizer or Batch Counter

—



—

✓



✓

—

✓

—

✓

58825400

58831400

58841400

58851400

Three Preset with Floating Pre-Warn

Main Counter, Batch and Totalizer Presets

Two Independent Count Registers

High-Speed Count Control — 30 kHz Max.

—





—





✓

—

✓

—

1 ea.

58861400

58827400

58827410

58867400

12345

67890

Count

19 20

IN OUT

21 22 23 24 25

115/230V~

50/60 Hz

26 27 28 29 30 31 32 33 34 35 36

1234

USE

EXTERNAL

FUSE!

IN1 IN2

5 6 7 8 9 101112131415161718

Preset

Durrant

Preset 1 Preset 2

Reset

Function

Enter

0.95 ±0.04

(24.1 ±1.0)

5.53 ±0.015 (140.5 ±0.4)

5.78 ±0.02 (146.8 ±0.5)

5.91 ±0.03 (150.1 ±0.8)

5.80 ±0.015

(147.3 ±0.4)

5.433 ±0.04

(138 ±1.0)

Recommended

Panel Cutout

2.677 ±0.03

(68 ±0.7)

3.04 ±0.015

(77.2 ±0.4)

0.735 ±0.02

(18.7 ±0.5)

2.62 ±0.025

(66.67 ±0.6)

5.38 ±0.02 (136.7 ±0.5)

6.25 ±0.02 (158 ±0.5)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Count Control

PD-Q and PD-ER Series — Durant®

Product Description

The PD-Q Series is a ﬁve-digit, true

subtracting electric predetermined

counter that features pushbutton oper-

ation of both predetermined count

settings and reset. The predetermined

count is set by holding the RESET but-

ton in and then depressing the easy to

operate pushbutton selectors under

each digit. The unit subtracts, one

count for each contact closure or

impulse and actuates a 4 ampere,

250V AC switch when zero is reached.

The output signal from this switch can

be used to halt or change the ﬂow of

items being counted, and/or operate

other electrical apparatus. The counter

returns to the predetermined number

when the RESET button is depressed

and it is immediately ready to control

the next lot or batch.

The PD-ER Series is identical to the

PD-Q Series, except that it has electric

reset (ER) for remote operation, allow-

ing either local or remote use.

Technical Data and

Speciﬁcations

■Number of Digits: 5

■Speed: 1000 cpm

■Window: Acrylic

■Shaft: Stainless Steel

■Frame: Zinc Alloy Die Cast

■Digit Size: 3/16 inch high by

7/64 inch wide (4.8 x 2.8 mm)

■Weight —

❑Series PD-Q: 0.53 Lb. (0.24 kg)

❑Series PD-ER: 1.06 Lb. (0.48 kg)

■Finish: Dull Instrument Black with

Red RESET Button

■Power Consumption —

❑Series PD-Q: 9 Watts

❑Series PD-ER: Count Coil 9 Watts,

Reset Coil 20 Watts

■Switch Rating: SPDT, 4 amperes at

250V AC

Cat. No. 5-Y-41433-*-PD-Q

Product Selection

Table 54. Product Selection — PD-Q and PD-ER Series Predetermined Counters

UL Recognized.

When Ordering Specify

When ordering PD-Q and PD-ER Series Predetermined Counters, specify Catalog

Numbers according to the features selected.

Dimensions

Figure 50. PD-Q and PD-ER Series — Approximate Dimensions in Inches (mm)

Voltage Mounting Wire

Leads

Catalog

Number

Order

Number *

12 DC

24 DC

120 AC

240 AC

Panel

Rear

5-Y-41433-401-PD-Q

5-Y-41433-402-PD-Q

5-Y-41433-406-PD-Q

5-Y-41433-407-PD-Q

41433401

41433402 

41433406 

41433407

24 AC

12 DC

24 DC

120 AC

Panel

Base

Rear

5-Y-41433-408-PD-Q

5-Y-41469-401-PD-Q

5-Y-41469-402-PD-Q

5-Y-41469-406-PD-Q

41433408

41469401

41469402 

41469406 

240 AC

24 AC

12 DC

24 DC

Base

Rear

Side

5-Y-41469-407-PD-Q

5-Y-41469-408-PD-Q

5-Y-41470-401-PD-Q

5-Y-41470-402-PD-Q

41469407

41469408

41470401

41470402 

120 AC

240 AC

24 AC

12 DC

Base

Panel

Side

Rear

5-Y-41470-406-PD-Q

5-Y-41470-407-PD-Q

5-Y-41470-408-PD-Q

5-Y-41625-401-PD-ER

41470406 

41470407

41470408

41625401

24 DC

120 AC

240 AC

24 AC

Panel

Rear

5-Y-41625-402-PD-ER

5-Y-41625-406-PD-ER

5-Y-41625-407-PD-ER

5-Y-41625-408-PD-ER

41625402 

41625406 

41625407

41625408

1.69

(42.8)

2.69

(68.2)

3.06

(77.8)

Hole Dia.

0.13 (3.2)

1.18

(30.1)

1.56

(39.7)

3.00

(72.6)

3.38

(85.7)

1.59

(40.5)

2.72

(69.0)

2.69

(68.2)

1.56

(39.7)

2.97

(75.4)

Dia. 0.14

(3.6)

3.00

(76.2)

3.38

(85.7)

1.31

(33.3)

1.69

(42.8)

4.38

(111.1)

4.00

(101.6)

2.69

(68.2)

2.00

(50.8)

1.63

(41.3)

3.22

(81.8)

1.69

(42.8)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Tachometers/Ratemeters

Product Family Overview

Introduction

Ratemeters are used in a variety of applications where it is

necessary to monitor the speed of a process. Conveyors,

baking ovens, material ﬂow and motor speed are typical

uses for ratemeters. Eaton/Durant models with alarm out-

puts can be used to detect high or low rates. Rate indicators

are often included as a standard feature on totalizers and

count controls.

Application Example

One of the most common ratemeter applications is a

tachometer. A tachometer displays motor or shaft RPM. The

inductive proximity sensor detects the key on the shaft and

the meter calculates the rate at which the shaft is turning

based on a user-deﬁned scaling factor. Signals from

encoders, mag pick-ups, Hall effect sensors, etc. may also be

used as inputs.

Ratemeter Product Family Overview

Table 55. Product Family Overview

High Alarm

Output

0 to 10V DC

Feedback to

Motor Drive

Low Alarm

Output

Proximity

Sensor

Motor

Application Example

Product Family Characteristics Panel Cutout

in Inches (mm)

Page

Number

■Compact device with bright, LED display

■Multiple functions available: count, time, rate, multifunction,

double-function

■24V DC Power

0.870 x 1.772

(22 x 44)

■Low cost, simple count control

■Various power options: battery, AC, DC

■Easy-to-change preset values

■2-line display: input and preset values

1.772 x 1.772

(45 x 45)

■Economical, multifunction display

■Large, LED characters

■AC or DC power options

1.772 x 1.622

(45 x 92)

■Replaceable lithium battery

■8-digit, high-visibility LCD display

■Optional backlighting

■Various input options available

1.299 x 2.677

(33 x 68)

■6-digit, super bright LED display

■Multiple models available: totalizers, ratemeters, count controls,

digital panel meters and ﬂow controls

1.772 x 1.622

(45 x 92)

■6-digit, high-visibility, 2-line LCD display

■User-conﬁgurable control inputs

■Highly ﬂexible control/display

2.667 x 2.667

(68 x 68)

■Bright LED display w/14 mm characters

■Simple conﬁguration with 14-button tactile keypad

■Many different versions ﬁt almost any application

2.667 x 5.433

(68 x 138)

■Integrated controller combines operator interface, ladder logic

and high-speed counting

2.667 x 5.433

(68 x 138)

E5-_24-E

E5-148-C

E5-496-C

Courier

Eclipse

Ambassador

President

Fusion

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Tachometers/Ratemeters

Courier Series — Durant®

Contents

Description Page

Tachometers/Ratemeters

Courier Series . . . . . . . . . . . 52

Eclipse Series . . . . . . . . . . . 53

Ambassador Series . . . . . . 55

Features

■1/Tau ratemeter

■Scaling capabilities

■Remote reset terminal

■0.43 inch (10.9 mm) display

■Front panel reset

■NEMA 4X

Standards and Certiﬁcations

■CE Marked

Technical Data and

Speciﬁcations

Power

■Internal Battery: 3V, Lithium

■Life Expectancy: 5 years +

■Replacement Part: 35367-202

Backlight

■10 – 30V DC @ 30 mA max.

Note: Derate operating temperature 1°C/

Volt above 17V DC.

■Reverse polarity protected

Physical

■Operating Temperature —

❑Model 53300-404: 32 to 131°F

(0 to 55°C)

❑Model 53301-404: -4 to 158°F

(-20 to 70°C)

❑Model 53302-404: 32 to 131°F

(0 to 55°C)

■Storage Temperature: -4 to 158°F

(-20 to 70°C)

Courier Series

■Operating Humidity: 60% R.H.

(non-condensing)

■Weight: 2.2 oz. (62 g) net

■Display Size: 0.43" (10.9 mm) high

■Front Panel Rating: NEMA 4X when

mounted with gasket provided

■Case Material: Cycolac X-17

Rate Indicator

■Type: 1/Tau

■Digits: 4/5 (4 calculated, 5 displayed

with ﬁxed 0 in LSD)

■Scaler Range: 0.001 to 9999.

■Decimal Point: 5 positions,

programmable

■Accuracy: ± 0.2%

■Update Time: 0.7 seconds

■Zero Time: 10 seconds

DC Common (Terminal 1) Rate Inputs

■Input B (Terminal 2) Low speed

input designed for contact closures

to DC common

❑Speed: 0 to 20 Hz

❑Min. Low Time: 10 mS

❑Min. High Time: 40 mS

❑Input Impedance: 101k Ohm

❑Voltage Thresholds —

Low: 0 – 0.4V DC

High: 2.0 – 28V DC

Max. High: 28V DC

■Input A (Terminal 3) High speed

input requiring a voltage source

such as a current sourcing sensor or

a current sinking sensor used with

the provided pull up resistors

❑Speed: 0 to 10 Hz

❑Min. Low Time: 80 mS

❑Min. High Time: 20 mS

Note: The above times are with a 0 – 5.0V

swing.

❑Input Impedance: 2k Ohm above

5V DC

❑Voltage Thresholds —

Low: 0 – 1.2V DC

High: 2.0 – 28V DC

Max. High: 28V DC

Programmable Enable Input

(Terminal 5)

■Operation: Level sensitive

(maintained)

Count Accuracy

■100% when operated within

Product Selection

Table 56. Product Selection — LCD 1/Tau Ratemeter

Note: For units with Rate and Total, see Totalizers.

Dimensions

Figure 51. Courier Series Ratemeter — Approximate Dimensions in Inches (mm)

Description Order

Number *

Battery

Extended Temperature Range, Battery

Backlight, Battery

53300404

53301404

53302404

1.30

(33.0)

1.57

(39.9)

1.25

(31.8)

2.67 (67.8)2.95 (74.9)

Recommended

Panel Cutout

T/R RST

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Tachometers/Ratemeters

Eclipse Series — Durant®

Features

■1/8 DIN Cutout

■NEMA 4X Front Panel

■Universal AC Power Supply

(85 – 265V AC)

■DC Power Modules (9 – 30V DC)

■Removable Screw Terminals

■Short Depth: 3.6 inch (91 mm)

■Front Panel Programming

Standards and Certiﬁcations

■UL and cUL Listed, CE Marked

Technical Data and Speciﬁcations

Input Power

■AC Powered Models (57701-4XX) —

❑Input Power: 85 – 265V AC,

47 – 63 Hz, 20V A

❑External Fuse: 0.2A, 250V AC,

Time Delay (T200 mA, 250V)

❑Isolation Dielectric Strength:

2300V AC

■DC Powered Models (57700-4XX)—

❑Input Power: 9 – 30V DC, 12 VA

❑External Fuse: 2.0A, 50V DC, Time

Delay, (T2A, 50V)

❑Reverse Voltage Protection: Yes

❑Isolation Dielectric Strength:

2300V AC to signal inputs and

relays, 500V AC to RS-485 and

analog outputs

Human Interface

■Display: 5 digits

■Type: 0.56" high, seven segment,

red LED

■Indicator: One red LED program/

calibration indicator

■Update Time: 0.1 to 99.9 seconds

minimum

Data Retention

■Memory Type: EEPROM, no

batteries required

■Duration: 100 years

Signal Input

■Rate/Process Time: Signal In

■Sensor Type: Sink or source, DIP

switch selectable

■Input Impedance: 4.75 k ohms to

+5V DC or 34.9 k Ohms to ground

■Thresholds —

❑High 3.5 to 28V DC

❑Low 0 to 1.9V DC, for single

ended signals

■Magnetic Pickup Range: 200 mV p-p

to 65 VRMS into 34.9 k Ohms

■Frequency Response: 200 Hz max.

or 10 kHz max. (5V signals), DIP

switch selectable

Program Enable Input

■Sensor Type: Sink only

■Input Impedance: 4.75 k Ohms to

+5V DC

■Thresholds —

❑High 3.5 to 28V DC

❑Low 0 to 1.9V DC

■Response: 25 mS max. (5V signal)

Accessory Power Output

■Voltage: 12V DC ± 12%

■Current: 75 mA max.

■Protection: Short circuit protected

Optional Outputs

■Relay Board —

❑Number of relays: 2

❑Contact type: 1 set form C per

relay

❑Contact rating: 5A, 250V AC or

30V DC

❑Isolation dielectric strength:

2300V AC

■Analog Retransmission —

❑Output signals: 4 – 20 mA

(<750 1) and 0 – 10V (>2500 1)

❑Accuracy: 0.13% full scale and

100 PPM /°C (and 0.07% full scale

change over 4 – 20 mA load

ranges)

❑Isolation dielectric strength:

2300V AC to signal inputs, relays

and AC power inputs; 500V AC to

RS-485 and DC power inputs

■RS-485 Serial Communications —

❑Baud Rate: 1200, 2400, 4800,

9600, or 19,200, programmable

❑Parity: Even, odd or no parity

❑Address Range: 00 to 99 decimal

❑Protocol: Opto 22® compatible

❑Isolation Dielectric Strength:

2300V AC to signal inputs, relays

and AC power inputs; 500V AC to

analog outputs and DC power

inputs

Environmental

■Operating Environment: Indoor use

to 2000 meters

■Temperature —

❑Operating: 32 to 122°F (0 to 50°C)

❑Storage: -4 to 158°F (-20 to 70°C)

■Humidity: 0 to 85% RH, non-

condensing

■Vibration: 2.5 Gs, 30 to 200 Hz

■Shock: 30 Gs, 11 mS half sinewave

■EMC —

❑Immunity to EN 50082-2 (Heavy

Industrial)

❑Emissions to EN 50081-2 (Heavy

Industrial)

■Front Panel: NEMA 4X when

mounted with gasket provided

■CE EMC immunity and emissions

requirements were met using

shielded wiring on the RS-485,

analog output and pulse input/

power lines. The shields were

connected to earth ground at the

Eclipse end of the shields.

■Pollution Degree 2: Overvoltage

category II

Cat. No. 57700470

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Tachometers/Ratemeters

Eclipse Series — Durant®

Product Selection

Table 57. Product Selection — Eclipse Series 5-digit LED Ratemeter

Dimensions

Figure 52. Eclipse Series Ratemeters — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

9 – 30V DC

9 – 30V DC, Alarms

9 – 30V DC, Analog Out

9 – 30V DC, Alarms, Analog Out

57700470

57700471

57700472

57700473

9 – 30V DC, RS-485

9 – 30V DC, Alarms, RS-485

9 – 30V DC, Analog Out, RS-485

9 – 30V DC, Alarms, Analog Out, RS-485

57700474

57700475

57700476

57700477

85 – 265V AC

85 – 265V AC, Alarms

85 – 265V AC, Analog Out

85 – 265V AC, Alarms, Analog Out

57701470

57701471

57701472

57701473

85 – 265V AC, RS-485

85 – 265V AC, Alarms, RS-485

85 – 265V AC, Analog Out, RS-485

85 – 265V AC, Alarms, Analog Out, RS-485

57701474

57701475

57701476

57701477

Durant

Max. Panel Thickness

0.190 (4.83)

3.622 ±0 .031

(92.00 ±0.8)

Panel Cutout

4.04

(102.6)

PGM

3.31

(84.1)

3.63

(92.2)

0.27

(6.9)

2.19

(55.6) 1.772 ±0.02

(45 ±0.6)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Tachometers/Ratemeters

Ambassador Series — Durant®

Features

■AC/DC powered, 2-line LCD display

■2-Line, 5-digit, high visibility, 0.3"

(7.5 mm) characters, backlit display

■1 or 2 rate inputs

■2 rate alarms

■Dual rate unit ratio calculations —

A/B, A-B or draw

■Programmable average and zero

times

■Programmable decimal point

■12V DC, 100 mA max. output power

■Removable screw terminals

■RS-485 communications

■NEMA 4 front panel

Standards and Certiﬁcations

■UL and cUL Listed, CE Marked

Technical Data and

Speciﬁcations

Power Input

■Model 57150-40X: 10 to 15V DC,

300 mA maximum

■Model 57151-40X: 115V AC (±15%)

50 – 60 Hz, 7W

■Model 57152-40X: 230V AC (±15%)

50 – 60 Hz, 7W

DC Power Output (AC Models Only)

■12V DC (±25%), 100 mA maximum

(includes all line and load

variations)

Environment

■Operating Temperature: 32 to 131°F

(0 to 55°C)

■Storage Temperature: -4 to158°F

(-20 to 70°C)

■Operating Humidity: 85% Relative,

non-condensing

■NEMA 4 rating when mounted with

gasket provided

Ratemeter

■Type: 1/Tau

■Digits: 5 with overrange indication

■Scaler Range: 0.00001 to 99999

■Decimal Point: 5 positions,

programmable

■Average Time: 0.1 to 99.9 seconds,

programmable

■Zero Time: 0.1 to 99.9 seconds,

programmable

■Accuracy: ±0.015% of reading

Maximum Rate Input Frequencies

■All maximum frequencies listed are

with a square wave input (50-50

duty cycle).

Contact Input

■40 Hz

Solid-State Input

■Sinking Sensor

(All DIPs off): 7.3 kHz

■Sourcing Sensor

(Push-Pull Output) —

❑High Threshold (DIPs 1 and 2 on,

3 and 4 off) —

– 0 – 5V, single input 50 kHz

– 0 – 5V, two inputs 30 kHz

(each input)

– 0.5 – 4.5V, single input 40 kHz

– 0.5 – 4.5V, two inputs 30 kHz

(each input)

– 0 – 15V, two inputs 22 kHz

(each input)

❑Low Threshold (All DIPs on) —

– -1 to +1V, single input 27 kHz

– -2 to +2V, single input 43 kHz

–)-3 to *+3V, single input 60 kHz

–)-2 to *+2V, two inputs 30 kHz

(each input)

Rate Inputs

■Sink —

❑Impedance: 4.6k ohms to +5V DC

❑Voltage:

High 3.5 to 34.0, low 0.0 to

1.9V DC

■Source (High) —

❑Impedance: 2.3k ohms to

common

❑Voltage: High 3.5 to 17.0V DC, low

0.0 to 1.9V DC

■Source (Low) —

❑Impedance: 2.3k ohms to

common

❑DC Voltage: High 0.63 to 17.0V

DC, low -17.0 to -0.6V DC

❑AC Voltage: 17V AC (48V Peak-

Peak) maximum

Control Inputs

■Impedance: 4.7k ohms to +5V DC

■Voltage: High +3.7 to +24V DC, low

0.0 to 0.9V DC

■Response: Min Low 15 mS,

Min High 15 mS

Transistor Outputs (x2 for 5715X-401;

x4 for 5715X-405)

■Type: NPN open collector with

transient protection

■Max. Voltage (OFF state): 30V DC

■Max. Current (ON state): 200 mA @

1.3V DC

Communication

■Type: RS-485

■Format: 1 start bit, 7 data bits

(ASCII), 1 parity bit, 1 stop bit

■Protocol: Opto-22 compatible

■Speed: 300, 1200, 2400, 4800, 9600,

19200 Baud

■Parity: Odd, Even, None (space

transmitted, ignore received)

Analog Output (Models 5715X-401 Only)

■Range: 0 – 10V DC ± 0.2% at 5 mA

■DAC Resolution: 12 bit

Connections

■Type: Dual depluggable screw

terminal strips

■Conductor Size: 14 – 22 AWG

(2.1 – 0.38 mm2), 600V, solid,

stranded or fused (preferred)

Cat. No. 57150400

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Tachometers/Ratemeters

Ambassador Series — Durant®

Product Selection

Table 58. Product Selection — Ambassador Series Ratemeters

The accuracy of the ratio calculation is dependent upon the resolution of the displayed rates,

which are calculated as rounded integers. The ratio calculation treats the displayed rate as

integers and the result is displayed as a rounded integer. A and B scalers should be adjusted for

maximum resolution.

Dimensions

Figure 53. Ambassador Series Ratemeters — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Single Input

LCD Rate indicator, 2 Rate Alarms, 10 – 15V DC

LCD Rate indicator, 2 Rate Alarms, 115V AC

LCD Rate indicator, 2 Rate Alarms, 230V AC

57150400

57151400

57152400

Dual Input 

Rate/Ratio/Draw with Alarms & Analog Out, 10 – 15V DC

Rate/Ratio/Draw with Alarms & Analog Out, 115V AC

Rate/Ratio/Draw with Alarms & Analog Out, 230V AC

57150405

57151405

57152405

2.946 ±0.015

(74.83 ±0.38)

A 12345

R/M

2.946 ±0.015

(74.83 ±0.38)

2.677 ±0.028

(68.00 ±0.70)

2.677 ±0.028

(68.00 ±0.70)

Panel Cutout

Max. Panel

Thickness

0.50 (12.7)

5.60 ±0.03

(142.24 ±0.76)

UNL

CLR

RUN

PGM

AKN

•

EXIT ENT SEL

Durant®

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Digital Panel Meters

Product Family Overview

Introduction

Digital Panel Meters are found anywhere a process variable

needs to be indicated. Volts, current, pressure, volume,

temperature and frequency are typical applications. The

product’s short depth makes it ﬂexible and accommodating

to panel builder needs. A variety of input and output options

allows Eaton/Durant DPMs to be used virtually anywhere.

Application Examples

■Monitor current draw from motor to identify potential

failures

■Display pressure reading from transducer with high-

pressure alarm

■Display system voltage and detect under voltage or over

voltage conditions

Digital Panel Meters Product Family Overview

Table 59. Product Family Overview

Product Family Characteristics Panel Cutout

in Inches (mm)

Page

Number

■Bright, easy-to-read LED in 1/32 DIN package

■Programmable scaling of inputs

■Input for Display-Hold

■24V DC power

0.870 x 1.772

(22 x 44)

■6-digit, super bright LED display

■Multiple models available: DC Voltage, AC Voltage, DC Current,

AC Current, 5A AC Current, 4 – 20 mA / 0 – 10V Process Meter

■Various output options including Relay, Analog and RS-485

1.772 x 1.622

(45 x 92)

E5-324-E

Eclipse

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Digital Panel Meters

E5-324-E Series

Contents

Description Page

Digital Panel Meters

E5-324-E Series . . . . . . . . . . 58

Eclipse Series . . . . . . . . . . . 59

Features

■Galvanic isolation with protection

against incorrect polarity

■Automatic MIN/MAX value

detection

■Freely programmable characteristic

curve end points

■Input Range —

❑1 current measuring input

❑1 voltage measuring input

■Compact display for analog

standard signals

■Display range -19.999 to 99.999 with

zero blanking

■Modern industrial design

■Input for Display-Hold

Standards and Certiﬁcations

■UL Recognized

■CE Marked

Technical Data and

Speciﬁcations

■Supply Voltage: 10 – 30V DC, gal-

vanically isolated with integrated

protection against incorrect polarity

■Current Consumption: Max. 50 mA

■

Display: 5-digit display, red 7-segment

LEDs; 0.31 Inch (8 mm) high

■Measuring Rate: 2 measurements/

second

■Data Backup: EEPROM

■Housing: Housing for control panel

1.898 x 0.94 Inch (48 x 24 mm); Acc.

to DIN 43 700, RAL 7021, dark gray

Cat. No. E5-324-E0402

■Ambient Temperature: 14 to 122° F

(-10 to 50°C)

■EMC: According to EC EMC directive

89/36/EEC

■

Interference Emissions: EN 61 000-6-4/

EN 55011 Class B

■

Interference Resistance: EN 61 000-6-2

■Protection: IP65 (front)

■Input Current Measurement:

0 – 20 mA, 4 – 20 mA, voltage drop

max. 1.5V DC

■Input Voltage Measurement:

0 – 10V, 2 – 10V

❑Input resistance approx.: 1 M1

❑Max. input signal level: 30V DC

■Control Inputs —

❑High: 4 – 30V DC

❑Low: 0 – 2V DC

■Resolution: 14 bits

■Error: <0.1% For the whole

measuring range at an ambient

temperature of 68°F (20°C)

■Weight: Approx. 1.76 oz (50 g)

■Connection Technique: Screw

terminal, pitch 0.2 Inch (5.08 mm),

7 poles

Product Selection

Table 60. Product Selection — E5-324-E0402

Dimensions

Figure 54. E5-324-E Series — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

LED Digital Panel Meter, 24 x 48 mm E5-324-E0402

2.32

(59.0)

0.26

(6.5)

0.16

(4.0)

Max. 0.76

(19.3)

0.87 x 1.77

(22.0 x 45.0)

1.89

(48.0)

Panel Cut-Out:

0.87 + 0.01 x 1.77 + 0.02

(22.2 + 0.3 x 45 + 0.6)

0.94

(24.0)

2.09

(53.0)

1.10

(28.0)

0.98 + 0.02

(25 + 0.5)

1.97 + 0.02

(50 + 0.6)

Panel Cut-Out

0.98 x 1.97

(25 x 50)

0.16

(4.0)

0.04

(1.0)

2.20

(56.0)

1.57

(40)

1.26

(32) 0.98 + 0.02

(25 + 0.5)

1.26 + 0.004

(32 + 0.1)

1.97 + 0.02

(50 + 0.6)

Panel Cut-Out

0.98 x 1.97

(25 x 50)

0.16

(4.0)

0.04

(1.0)

Connections:

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Digital Panel Meters

Eclipse Series — Durant®

Features

■4 Full digits

■1/8 DIN Size

■Red, LED display

■0.56" (14 mm) high characters

■Scalable display

■Flashing alarms

■Maximum/minimum data hold

■Optional analog, relay and RS-485

outputs

■NEMA 4X

■Depluggable terminal blocks

Standards and Certiﬁcations

■UL and cUL Listed, CE Marked

Technical Data and

Speciﬁcations

Input Power

■AC Powered Models (57751-4XX)

❑Input Power: 85 – 265V AC,

47 – 63 Hz, 20 VA

❑External Fuse: 0.2A, 250V AC,

Time Delay (T200mA, 250V)

❑Isolation Dielectric Strength:

2300V AC

■DC Powered Models (57750-4XX)

❑Input Power: 9-30V DC, 12 VA

❑External Fuse: 2.0A, 50V DC, Time

Delay (T2A, 50V)

❑Reverse Voltage Protection: Yes

❑Isolation Dielectric Strength:

2300V AC to signal inputs and

relays, 500V AC to RS-485 and

analog outputs

Human Interface

■Display: ±4 full digits

■Type: 0.56" (14 mm) high, seven

segment, red LED

■Update Time: 0.4 seconds

■Alarm: Flashing display

■Indicator: One red LED program/

calibration indicator with max./min.

capture and hold

Data Retention

■Memory Type: EEPROM, no batter-

ies required

■Duration: 100 years

Signal Input

■DC Voltage Models (5770X-40X) —

❑Range: ±199.9 mV DC, ±1.999V

DC, ±19.99V DC, ±199.9V DC, DIP

Switch Selectable

❑Impedance: 1 M 1 (ohms)

❑Overrange: 750V DC/530V AC

except 220V DC/AC on 199.9 mV

range

❑Accuracy: ±0.1% of reading,

±0.03% FS, ±0.5 digit, and ±80

PPM/°C

■AC Voltage Models (5770X-41X) —

❑Range: 199.9 mV AC, 1.999V AC,

19.99V AC, 199.9V AC, DIP Switch

Selectable, all ranges true RMS

❑Frequency: 40 to 1000 Hz

❑Impedance: 1 M 1 (capacity

coupled)

❑Overrange: 750V DC/530V AC

except 220V DC/AC on 199.9 mV

range

❑Accuracy: ±0.5% of reading,

±0.13% FS, ±0.5 digit, ±180 PPM/

°C for crest factor = 1; plus ±0.7%

for crest factor = 1 to 3; and ±2.5%

for crest factor = 5

■DC Current Models (5770X-42X) —

❑Range: ±199.9 μA DC, ±1.999 mA

DC, ±19.99 mA DC, ±199.9 mA DC,

DIP Switch Selectable

❑Impedance: 199.9 mV/selected

range

❑Overrange: 30 mA (1 99.9 μA

range), 100 mA (1. 999 mA range),

300 mA (19.99 mA range), 1 A

(199.9 mA range)

❑Accuracy: ±0.1% of reading,

±0.03% FS, ±0.5 digit, and ±120

PPM/°C

■AC Current Models (5770X-43X)

❑Range: 199.9 μA AC, 1.999 mA

AC, 19.99 mA AC, 199.9 mA AC,

DIP Switch Selectable, all ranges

true RMS

❑Frequency: 40 to 1000 Hz

❑Impedance: 199.9 mV/selected

range (shunt output capacitive

coupled)

❑Overrange: 30 mA (11 99.9 μA

range), 100 mA (1.999 mA range),

300 mA (19.99 mA range), 1A

(199.9 mA range)

❑Accuracy: ±0.5% of reading,

±0.13% FS, ±0.5 digit, and ±200

PPM/°C for crest factor = 1; plus

±0.7% for crest factor = 1 to 3; and

±2.5% for crest factor = 5

■5A AC Models (5770X-44X) —

❑Range: 5A AC, true RMS

❑Frequency: 40 to 1000 Hz

❑Impedance: 0.02 ohms (shunt out-

put capacitive coupled)

❑Overrange: 10A Maximum

❑Accuracy: ±0.4% of reading,

±0.13% FS, ±0.5 digit, and ±200

PPM/°C for crest factor = 1; plus

±0.7% for crest factor = 1 to 3; and

±2.5% for crest factor = 5

■Process Models (5770X-45X) —

❑Range: 4 – 20 mA DC, 0 – 10V DC,

1 – 5V DC; separate input

terminals for voltage and current

signals

❑Impedance: 100 1 (current input)

and 1.27 M 1 (voltage input)

❑Overrange: 50 mA maximum (cur-

rent input) and 100V maximum

(voltage input)

❑Power Output: 24V DC ±10%, 90

mA max, short circuit protected

❑Accuracy: ±0.1% of reading,

±0.03% FS, ±0.5 digit, and ±80

PPM/°C

Optional Outputs

■Relay Board —

❑Dual relay: 1 set of form C

contacts each

❑Contact rating; 5A, 250V AC or

30V DC

❑Isolation dielectric strength:

2300V AC

■Analog Retransmission —

❑Output Signals: 4 – 20 mA

(<750 1) and 0 – 10V (>2500 1)

❑Accuracy: 0.13% FS, 100 PPM/°C,

0.07% FS change with 4 – 20 mA

load, ±0.3% FS for 4 – 20 mA

output, only after exposure to

85% relative humidity

❑Isolation dielectric strength:

2300V AC to signal inputs, relays

and AC power input; 500V AC to

RS-485 and DC power inputs

Cat. No. 57700400

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Digital Panel Meters

Eclipse Series — Durant®

■RS-485 Serial Communication —

❑Baud Rate: 1200, 2400, 4800, 9600

or 19,200, programmable

❑Parity: Even, odd or no parity

❑Address Range: 00 to 99 decimal

❑Protocol: Opto 22® compatible

❑Isolation Dielectric Strength:

2300V AC to signal inputs, relays,

and AC power input; 500V AC to

analog outputs and DC power

inputs

Environmental

■Operating Env.: Indoor use to 2000

meters

■Temperature —

❑Operating: 32 to 122°F (0 to 50°C)

❑Storage: -4 to 158°F (-20 to 70°C)

■Humidity: 0 to 85% RH, non-

condensing

■Vibration: 2.5 Gs, 30 to 200 Hz

■Shock: 30 Gs, 11 mS half sinewave

■EMC/EMI: Per EN 61326-1 Industrial

■Front Panel: NEMA 4X when

mounted with gasket provided

■Agency Approval:

❑CE EMC immunity and emissions

requirements were met using

shielded wiring on the RS-485,

analog output and signal input

lines. The shields were connected

to earth ground at the Eclipse end

of the shields.

❑Conducted emissions

requirements were met assuming

that the AC signal input would not

be connected directly to the AC

Mains.

❑The measurement error during RF

immunity testing was less than

±5% of full scale. In addition,

models with an AC signal input

had measurement error of less

than +25% of full scale during RF

immunity testing of the RS-485 at

frequencies below 1 MHz.

■Pollution Deg. 2: Overvoltage

Category II

Catalog Number Selection

Table 61. Eclipse Series Digital Panel Meters Numbering System

Output Options 0, 2, 4 are not available for models -41X and -43X.

5770 X - 4XX

Power Supply

0 = DC (9 – 30V DC)

1 = AC (85 – 265V AC)

Input Option

0 = DC Volt

1 = AC Volt TRMS

2 = DC Amp

3 = AC Amp TRMS

4 = 5A AC TRMS

5 = Process (4 – 20 mA,

0 – 10V, 1 – 5V)

6 = Temperature (J, K, T,

PT100 RTD)

Output Option 

0 = No Option

1 = Dual Relay

2 = Analog Output (4 – 20 mA

and 0 – 10V)

3 = Dual Relay, Analog Output

(4 – 20 mA and 0 – 10V)

4 = RS-485 Communications

5 = Dual Relay, RS-485

6 = Analog, RS-485 (4 – 20 mA

and 0 – 10V)

7 = Dual Relay, Analog, RS-485

(4 – 20 mA and 0 – 10V)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Digital Panel Meters

Eclipse Series — Durant®

Dimensions

Figure 55. Eclipse Series Digital Panel Meters — Approximate Dimensions in Inches (mm)

Durant

Max. Panel Thickness

0.19 (4.8)

3.622 ±0 .031

(92.0 ±0.8)

Panel Cutout

4.04

(102.6)

PGM

3.31

(84.1)

3.63

(92.2)

0.27

(6.9)

2.19

(55.6) 1.772 ±0.02

(45 ±0.6)

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Timers/Hour Meters

Product Family Overview

Introduction

Timers are used in applications where time itself is the main

focus. These include simple knowledge of how long a

machine has been running to determine machine mainte-

nance, for example, (elapsed time) to knowing when to

change an elevator cable (cable life and safety). Timers

generally have the ability to stop and then to continue on

from the point at which they stopped. Timer Relays are used

in applications where an output is required to make some-

thing happen at a predetermined point in time (to stop or

start the process).

Application Examples

■Elapsed time indication for interval maintenance of

construction and agricultural equipment

■Usage metering for determining charges on rental

equipment

■Controlled process timing for adhesive application/curing

equipment

Timers/Hour Meters Product Family Overview

Table 62. Product Family Overview

Product Family Characteristics Panel Cutout

in Inches (mm)

Page

Number

■Non-replaceable battery (min. 8-yr. life)

■Compact, low cost and high efﬁciency

■8-Digit LCD timer

■Manual or electrical reset

■Various timing modes (Hr/Min/Sec)

0.870 x 1.772

(22 x 44)

■Compact device with bright, LED display

■Multiple functions available: count, time, rate, multifunction,

double-function

■24V DC Power

0.870 x 1.772

(22 x 44)

■Panel-mount, battery powered time relay

■8 timing modes, 9 time ranges

■3 programmable activation modes

■8A relay contacts (N.O. or N.C.)

1.772 x 1.772

(45 x 45)

■Economical, multifunction display

■Large, LED characters

■AC or DC power options

1.772 x 3.622

(45 x 92)

■Compact, low-cost LCD and electromechanical elapsed time

meters

■Various power options for almost any power supply

Various 65

■DIN Rail-mount, battery-powered time relay

■8 timing modes

■1 million operations or 10 years

■10A contact rating

N/A 70

E5-224-C

E5-_24-E

E5-248-C

E5-496-E

Hour Meters

E42DP55

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Timers/Hour Meters — Electronic

1/32 DIN LCD — Timers

Contents

Description Page

Timers/Hour Meters — Electronic

1/32 DIN LCD — Timers . . . 63

E42DI24/E42DIR Series . . . 65

Timers/Hour Meters —

Electromechanical

1/16th DIN Hour Meters. . . 66

71.1 Round Hour Meter . . . 67

Time Controls

Battery-Powered LCD . . . . 68

E42DP55 Battery

Powered . . . . . . . . . . . . . . 70

Features

■Low price and high efﬁciency

■Large 8-digit LCD display, height of

the ﬁgures 0.31 Inch (8 mm)

■Different time ranges from 0.1

second to 100,000 hours

■0.1 second synchronization makes

it suitable for very short activation

times

■High voltage input for 10 – 260V

AC/DC voltage pulses

■IP65

■Screw terminals, RM 5 mm

■Lifetime of the battery

approximately 8 years

■Locking of the reset key

■Operating temperature 14 to 140°F

(-10 to 60°C)

Standards and Certiﬁcations

■UL Recognized

■CE Marked

Technical Data and

Speciﬁcations

■Power Supply: Non-replaceable

lithium battery (lifetime

approximately 8 years at 68°F (20°C)

■Display: LCD, 8-digits, height of the

ﬁgures 0.31 Inch (8 mm)

■Counting Direction: Adding

■Display Range —

❑Time Range: 99999 h 59 m (134)

Display:

❑Time Range: 99999.99 h (134)

Display:

❑

Time Range: 9999 h 59 m 59 s (135)

Display:

❑Time Range: 9999999.9 s (135)

Display:

■Reset: Manual and electrical

■Timer Inputs, DC versions

(max. 30V DC) —

❑Timer input: NPN or PNP

depending on the type

❑Switching level —

NPN Low: 0 – 0.7V

NPN High: 3 – 30V DC

PNP Low: 0 – 0.7V

PNP High: 4 – 30V DC

❑Counting start —

NPN: For low signal at the timer

input

PNP: For high signal at the timer

input

■Timer Inputs, High voltage version

(10 – 260V DC/V AC) —

❑Timer input: Optocoupler input

max. 30 Hz

❑Min. pulse time: 16 mS

❑Switching level —

Low: 0 – 2V DC/V AC

High: 10 – 260V DC/V AC

❑Counting start: For high signal at

the timer input

■Time Range Change (Mode) —

❑Contact input —

Open collector (switching at 0V)

NPN Low: 0 – 0.7V

NPN High: 3 – 5V DC

❑Time Range: Depending on the

circuit

■Reset Input (Only DC and High

Voltage) —

❑Minimum pulse time—

DC: 50 mS

High Voltage: 10 mS

❑Contact input (DC) —

NPN Low: 0 – 0.7V

NPN High: 3 – 30V DC

❑High voltage input:

10 – 260V DC/V AC

■

Reset Locking Input (For DC and AC),

Electrical Reset Key Locking —

❑Input not active: Reset key locked

❑Contact input: Open collector

NPN (switching at 0V)

❑Switching level —

NPN Low: 0 – 0.7V

NPN High: 3 – 5V DC

■Interference Emissions: EN 55011

Class B, EN 61 000-6-2, EN 61010

Section 1 (only AC versions)

■Housing; Dark gray RAL 7021

■Operating Temperature: 14 to 131°F

(-10 to 55°C)

■Ambient Temperature: 14 to 140°F

(-10 to 60°C)

■Storage Temperature: -4 to 158°F

(-20 to 70°C)

■Protection: IP65 (from front)

■Weight: Approx. 1.76 oz (50 g)

Cat. No. E5-224-C0440

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Timers/Hour Meters — Electronic

1/32 DIN LCD — Timers

Product Selection

Table 63. Product Selection — 1/32 DIN LCD, Timers

Dimensions

Figure 56. 1/32 DIN LCD, Timers — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

8-digit LCD Timer, Battery Power

Hours/Minutes, 0.94 x 1.89 Inch (24 x 48 mm)

Hours/Minutes, 10 – 260V Input, 0.94 x 1.89 Inch (24 x 48 mm)

Minutes/Seconds, 0.94 x 1.89 Inch (24 x 48 mm)

Minutes/Seconds, 10 – 260V Input 0.94 x 1.89 Inch (24 x 48 mm)

E5-224-C0440

E5-224-C0448

E5-224-C0450

E5-224-C0458

1.77 + 0.024

(45 + 0.6)

1.77 + 0.012

(22.2 +0.3)

572690.43

1.89 (48)

MAX. 1.89 (19.3)

0.11 (2.8)

0.12 (3)

1.88 (47.7)

0.87 x 1.77

(22 x 45)

0.94

(24)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Timers/Hour Meters — Electronic

E42DI24/E42DIR Series — Durant®

Features

■Solid-state hour meters

■Record and display up to 99,999.9

hours, rollover and continue timing

■EEPROM memory can retain data

for 25+ years

■Time accumulation indicated by

ﬂashing hourglass icon

■Memory will arm only when power

has been applied for 5 seconds

Standards and Certiﬁcations

■UL recognized

■CE compliant

Technical Data and

Speciﬁcations

■Function: Solid-state hour meter

■Power Supply —

❑E42DIXX1260X:

12 – 48V DC ±25%/

20 – 60V AC ±25%

❑E42DIXX48230X:

48 – 150V DC +23% -25%/

100 – 230V AC +17% -25%

■Frequency Range: 48 – 440 Hz

■Display: 6-digit LCD, 0.20" (5 mm)

■Accuracy: ±0.1%

■Recording/Display Capacity:

99,999.9 hours

■Resolution: 0.1 hour (6 minutes)

■Current Consumption Max. @

Nominal Voltage

❑E42DIXX1260X:

0.8 mA @ 12V DC

5.0 mA @ 48V DC

0.5 mA @ 20V AC

2.5 mA @ 60V AC

❑E42DIXX48230X:

0.8 mA @ 48V DC

2.5 mA @ 150V DC

0.9 mA @ 100V AC

2.0 mA @ 230V AC

Cat. No. E42DIR

Cat. No. E42DI24

■Input Impedance Minimum

(Pins 3 and 4) —

❑E42DIXX1260X: 70k ohms

❑E42DIXX48230X: 480k ohms

■Operating Temperature: -40 to 185°F

(-40 to 85°C)

■Storage Temperature: -58 to 194°F

(-50 to 90°C)

■Weight —

❑E42DIRXXXXXX: 1.94 oz (55 g)

❑E42DI24XXXXXX: 0.78 oz (22 g)

Product Selection

Table 64. Product Selection — E42DI24/E42DIR Series Elapsed Time Meters

Dimensions

Figure 57. E42DI24/E42DIR Series — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Round LCD

Elapsed Hour Meter, 48 – 150V DC/100 – 230V AC

Elapsed Hour Meter w/Reset, 48 – 150V DC/100 – 230V AC

Elapsed Hour Meter, 12 – 48V DC/20 – 60V AC

E42DIR48230

E42DIR48230R

E42DIR1260

Rectangular LCD

Elapsed Hour Meter, 48 – 150V DC/100 – 230V AC

Elapsed Hour Meter, w/Reset, 48 – 150V DC/100 – 230V AC

Elapsed Hour Meter, 12 – 48V DC/20 – 60V AC

E42DI2448230

E42DI2448230R

E42DI241260

1.40

(35.6)

0.89

(22.6)

1.22

(31.1)

1.75

(44.5)

2.00

(53.1)

Dia. 2.30

(58.4) Max.

Dia. 2.06

(52.3) Max.

U Clamp for

0.03 – 0.25 (7.6 – 6.4)

Panel Thickness

Black Bezel

Washer

Thumbnut 0.16 (4.0)

Terminal 0.25

(6.4) Max.

0.52 (13.2)

Max.

1.13

(28.7)

0.06

(1.5)

Terminal

0.25 (6.4)

0.93 (23.6)

0.95 +0.01

-0.00

(24.1 +0.25

-0.00)

1.45 +0.01

-0.00

(36.8 +0.25

-0.00)

0.71

(18)

0.18

(4.7)

0.35 (8.9)

Max.

1.13 (28.6)

Max.

HOURS

Durant 1/10

HOURS

Durant

QUARTZ

—

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Timers/Hour Meters — Electromechanical

1/16th DIN Hour Meters — Eaton

Features

■High shock resistance

■Without reset

■Small dimension

■Magniﬁed ﬁgures

■Protection IP65

■Data retention if power is lost

■Long service life

■Optional mounting position

Applications

■General elapsed time

■Service interval for measurement

systems —

❑Respiratory ventilators

❑Oxygen machines

❑Dialysis machines

■Small appliances

■UV lamps

■Display panels in cars

Standards and Certiﬁcations

■UL Recognized

Technical Data and

Speciﬁcations

■Electrical Connection: Clamp

terminal for cable diameter up to

14 AWG (2.5 mm2), tightening

torque max. 0.59 lb-ft (0.8 Nm)

■Power Consumption —

❑10 – 30V DC: Approx. 500 mW

❑100 – 130V DC: Approx. 750 mW

■Rated Voltages

❑100 – 130V AC, 50 or 60 Hz

❑10 – 30V DC

■On Time: 100%

■Display —

❑7 at AC: 99999.99

❑8 at DC: 999999.99

■Accuracy —

❑AC: Supply frequency + 30 mS

❑DC: <0.003% (24 h)

■Count Mode: Adding

Cat. No. 7-T-65-4848PM-406

■Height of Figures: 0.16 Inch (4 mm)

■Color of Figures: White and Red-on-

Black

■Ambient Temperature: 5 to 122°F

(-15 to 50°C)

■Mounting Position: Any

■Protection: IP65

■Housing: Plastic

■Weight: 1.7 oz (48 g)

■Operating Indicator of the Running

Time Meter —

❑AC: Fast rotating wheel with red

dashes

❑DC: 1/100 h display turns

continuously by 1-digit in 36 sec.

■Test voltage: 2000V AC, 50 Hz for AC

counters

■Options: Further voltages on

request

■Color of Housing: Gray

Product Selection

Table 65. Product Selection — 1/16th DIN Hour Meters

Accessory

Figure 58. DIN Rail Adapter — Approximate

Dimensions in Inches (mm)

Table 66. Product Selection — DIN Rail Adapter

Dimensions

Figure 59. 1/16th DIN Hour Meters — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Electromechanical Hour Meters

10 – 30V DC, 1.89 x 1.89 Inch (48 x 48 mm)

10 – 30V DC, 1.89 x 1.89 Inch (48 x 48 mm), 50 pc. package

8-T-65-4848PM-402

8-T-65-4848PM-40284

100 – 130V AC, 1.89 x 1.89 Inch (48 x 48 mm)

100 – 130V AC, 1.89 x 1.89 Inch (48 x 48 mm), 50 pc. package

7-T-65-4848PM-406

7-T-65-4848PM-40684

Cat. No. T4848DINADAPT

2.42

(61.5)

1.91

(48.5)

0.75

(19)

1.62

(41.1)

Description Catalog

Number *

DIN Rail Adapter for DIN Electromechanical Hour Meter T4848DINADAPT

1.10

(28)

0.28

(7)

0.35 (9)

Max.

Dia. 1.97

(50)

1.77+0.02 (45+0.6)

SQ.

Panel Cut-Out

1.77 (45) SQ.

Screw

Terminal

1.89 (48) SQ.

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Timers/Hour Meters — Electromechanical

71.1 Round Hour Meters — Eaton

Features

■6-digit hour meter for round panel

cut-out

■Low cost

■High shock resistance

■Low power consumption

■Small dimension

■Magniﬁed ﬁgures

■Waterproof

■Protection IP65

■Data retention if power is lost

■Available in 50 pc. bulk package

Applications

■General elapsed time

■Utility vehicles

■Construction machines

■Generators

■Fork-lift trucks

■Car washes

■Outside areas

Cat. No. 6-T-3H-508RPM-406

Technical Data and Speciﬁcations

■Electrical Connection: Flat pins

0.8 x 6.3

■Power Consumption —

❑AC: Max., 0.4 VA

❑12V DC: Max., 0.08W

❑48V DC: Max., 0.7W

■Rated Voltages: 115V AC ±10%,

50/60 Hz, 10 – 80V DC

■On Time: 100%

■Display: 6-digits, 99999.9 h

■Count Mode: Adding

■Height of Figures: 0.14 Inch

(3.5 mm)

■Reset: None

■Ambient Temperature: -22 to 149°F

(-30 to 65°C)

■Mounting Position: Any

■Protection: IP65

■Housing: Plastic

■Error: <0.02% over the full range

Product Selection

Table 67. Product Selection — 71.1 Round Hour Meters

Dimensions

Figure 60. 71.1 Round Hour Meters — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Electric Hour Meters

115V AC, 2.80 Inch (71.1 mm) Round

115V AC, 2.80 Inch (71.1 mm) Round — 50-piece Package

6-T-3H-508RPM-406

6-T-3H-508RPM-40684

10 – 80V DC, 2.80 Inch (71.1 mm) Round

10 – 80V DC, 2.80 Inch (71.1 mm) Round — 50-piece Package

6-T-3H-508RPM-402

6-T-3H-508RPM-40284

0.21

(5.3)

1.26

(32)

0.47

(12)

1.68

(42.7)

0.03 x 0.25

(0.8 x 6.3)

Dia. 2

(50.8)

Dia. 2

(50.8)

120°

Dia. 0.15

(3.8)

Dia.

0.13

(3.3)

Dia. 2.80

(71.1)

Dia. 2.44

(62)

Dia. 2.54

(64.5)

Panel Cut-Out

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-2

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Time Controls

Battery-Powered LCD Time Control, 48 x 48 mm — Eaton

Features

■No external voltage supply, because

of internal replaceable lithium

battery

■High contrast, 2-line LCD display,

5-digit with many symbols for easy

operation and reading

■9 programmable time ranges from

0.20 seconds up to 99.999 hours

■Resolution up to 0.01 seconds

■Inputs for start and reset; universal

inputs for 12 – 260V AC/DC

■8 timing modes —

❑ON Delay, OFF Delay, One Shot

and Single Shot

❑Repeat cycle modes: Delay, Cycle,

Symmetrical delay

■3 programmable activation modes

■Relay contacts rated at 8A

programmable to NO or NC

■Protection IP65

■Plug-in connector

Standards and Certiﬁcations

■CE Marked

Cat. No. E5-248-C1420

Technical Data and Speciﬁcations

■Voltage Supply: 2 x 3V, 1/2AA

replaceable lithium battery, service

life > 10 years or 500,000 relay

charges

■Timing and Reset Inputs: 12 – 260V

AC/DC, impedance 180 k1, min.

impulse 20 mS (optocoupler)

■Display —

❑Time: 5-digit LCD display, 0.26

Inch (6.5 mm) high

❑Set Time Mode: 5-digit LCD

display, 0.14 Inch (3.5 mm) high

■Accuracy: +50/-20 mS respectively

0.5% of setting time (higher value

counts)

■0.3% of setting time

■Operating Temperature: 14 to 122°F

(-10 to 50°C)

■Storage Temperature: -4 to 158°F

(-20 to 70°C)

■Relative Humidity: 80% max. up to

89°F (31°C); decreasing to max., 50%

to 104°F (40°C)

■Protection: IP65 with delivered seal

■Output Relays —

❑Contact connection: SPTST volt-

age free contacts programmable

as NO or NC

❑Contact rating:

250V AC at 8A; cos ø = 1

250V AC at 5A; cos ø = 0.4

30V DC at 8A; cos ø = 1

■Reaction Time: < 20 mS

■Expected Life: 2A ohm’s load

1,000,000 switching cycles

■EMC: CE-conform to EC-guideline

89/36/EWG

■Electromagnetic Radiation:

EN 61000-6-4/EN 55011 Class B

■Electromagnetic Immunity:

EN 61-000-6-2

■Weight: Approx. 2.8 oz (80 g)

■Time Ranges —

❑1 – 99999 sec; 0.2 - 9999.9 sec;

0.02 – 999.99 sec

❑1 – 99999 min; 0.1 - 9999.9 min;

0.01 – 999.99 min

❑1 – 99999 hour; 0.1 – 9999.9 hour;

0.01 – 999.99 hour

Timing Modes

Figure 61. Timing Modes

Relay

Single Shot

Start

Relay

Reset

One Shot

Start

Relay

Reset

OFF Delay

Start

Relay

Level Trig Edge Trig Edge Retrig

ON Delay

Start

tt t

tttt

Repeat Cycle Symmetrical

Start

Relay

Reset

Repeat Cycle Symmetrical Delay

Start

Relay

Reset

Repeat Cycle

Start

Relay

Level Trig Edge Trig Edge Retrig

Repeat Cycle Delay

Start

=t =t =t =t =t =t

=t =t =t =t =t =t =t =t

t+t-t+

t-t+t-t+

t+ t- t+ t- t+ t+ t- t+

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

April 2007

Time Controls

Battery Powered LCD Time Control, 48 x 48 mm — Eaton

Product Selection

Table 68. Product Selection — Battery-Powered Time Control

Dimensions

Figure 62. Battery-Powered LCD Time Control, 48 x 48 mm — Approximate Dimensions

in Inches (mm)

Note: Panel Cut-Out is 177 + 0.02 Inch Sq. (45 +0.6 mm Sq.).

Description Catalog

Number *

Battery-Powered LCD Time Control, 1.89 x 1.89 Inch

(48 x 48 mm)

E5-248-C1420

1.89

(48)

1.89

(48)

1.77

(45)

0.63

(16)

2.49

(63.2)

0.12

(3)

0.41 (10.5) Max.;

0.37 (9.5)

at Front Panel

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Time Controls

E42DP55 Battery Powered, DIN Rail Mounted

Features

■Digital time control with 8 timing

modes

■Battery powered — 1 million

operations or 10 years

■Battery included

■DIN Rail mounted

■0.2 Seconds to 999.99 hours

■Easy-to-read LCD display with mode

annunciators

Technical Data and

Speciﬁcations

Operating Modes

■ON Delay

■OFF Delay

■Cycle One-Shot

■Single-Shot

■Repeat Cycle Delay

■Repeat Cycle

■Repeat Cycle Delay =

■Repeat Cycle =

Time Setting Ranges

■1 – 999, 1 – 99.9 sec.

■1 – 999, 0.1 – 99.9, 0.01 – 9.99 min.

■1 – 999, 0.1 – 99.9, 0.01 – 9.99 hrs.

Cat. No. E42DP55

Display

■2 rows of 3 digits, black on silver

LCD

■Upper row 0.275" (7 mm) indicates

time

■Lower row 0.157" (4 mm) indicates

set point

Power Supply

■Two 1/2AA 3V lithium batteries

■10 year expected life (the built-in

batteries are sealed for life and are

not replaceable

Timing Input

■12 – 260V opto-isolated inputs

■Selectable sink (NPN) or source

(PNP) if using DC input device

■Input Impedance: 220k ohm

■Level or edge triggered

■Minimum pulse width of 20 mS

Output Relays

■Contacts: SPDT voltage free

contacts

■Contact Rating: 10A 380V or 220V

■Power Rating: 2000VA/150W

■Reaction Time: <20 mS

■Mechanical Life: 10,000,000

operations

■Electrical Life —

❑100,000 operations @ 8A

(resistive load)

❑1,000,000 operations @ 2A

(resistive load)

Repeat Accuracy

■0.3% of set time

Setting Accuracy

■+50 -20 mS or 0.5% of set time

(whichever is greater)

Temperature —

■Operating: 14 to 140°F (-10 to 60°C)

■Storage: -4 to 158°F (-20 to 70°C)

Product Selection

Table 69. Product Selection — E42DP55 Battery-Powered Time Control

Dimensions

Figure 63. E42DP55 Time Control — Approximate Dimensions in Inches (mm)

Note: The E42DP55 is designed to snap mount to any standard 35 mm DIN Rail.

Description Catalog

Number *

Battery-Powered Time Control, DIN Rail Mounted E42DP55

3.94

(100.0)

3.40

(86.3)

0.89

(22.5)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Flow Totalizers, Transmitters and Controls

Product Family Overview

Introduction

Flow products are used in a variety of applications where

liquid gas ﬂow needs to be monitored or controlled. Eaton

offers models for ﬂow total, ﬂow rate and ﬂow batch control.

Several optional outputs allow great ﬂexibility to meet most

application needs.

Application Example

In many processes, it is desirable to know both the total

quantity of product being produced and the rate at which the

product is being produced.

In the illustration at right, the output of a turbine ﬂow sensor

is connected to a totalizer/ratemeter. The ﬂow sensor

produces a known number of pulses per gallon (or other unit

of measure). The instrument scales these pulses into the

desired units of ﬂow volume (gallons, liters, barrels, etc.),

and ﬂow rate (gallons/minute, barrels/hour, etc.).

Flow Totalizers/Controls Product Family Overview

Table 70. Product Family Overview

RST

T / R Durant

Liquid

Application Example

53300-405

Totalizer/Ratemeter

Flow Sensor

Product Family Characteristics Typical Applications Panel Cutout

in Inches (mm)

Page

Number

■Replaceable lithium battery

■8-digit, high-visibility LCD display

■Optional backlighting

■Various input options available

■Portable/mobile/remote ﬂow monitoring

(e.g. sewer pumping, pesticide application)

1.299 x 2.677

(33 x 68)

■6-digit, super bright LED display

■Multiple models available: totalizers,

ratemeters, count controls, digital panel

meters and ﬂow controls

■Length measurement and control

■Flow monitoring and control

■Process monitoring and display

■Voltage and current monitoring and display

1.772 x 1.622

(45 x 92)

Courier

Eclipse

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Flow Totalizers, Transmitters and Controls

Eclipse Series — Durant®

Features

■6- or 10-digit display

■1/8 DIN Size

■Red, LED display

■0.56" (14 mm) high characters

■Scalable display

■Analog or pulse input versions

■Accessory power output

■15-point linearization available

■Dual valve pre-warn available

■Optional analog, relay and RS-485

outputs

■NEMA 4X

■Depluggable terminal blocks

Standards and Certiﬁcations

■UL and cUL Listed

■CE Marked

Technical Data and

Speciﬁcations

Input Power

■AC Powered Models (57751-4XX)

❑Input Power: 85 – 265V AC,

47 – 63 Hz, 20 VA

❑External Fuse: 0.2A, 250V AC,

Time Delay (T200mA, 250V)

❑Isolation Dielectric Strength:

2300V AC

■DC Powered Models (57750-4XX)

❑Input Power: 9 – 30V DC, 12 VA

❑External Fuse: 2.0A, 50V DC, Time

Delay (T2A, 50V)

❑Reverse Voltage Protection: Yes

❑Isolation Dielectric Strength:

2300V AC to signal inputs and

relays, 500V AC to RS-485 and

analog outputs

Human Interface

■Display: 6 digits

■Type: 0.56" high, seven segment,

red LED

Data Retention

■Memory Type: EEPROM, no

batteries required

■Duration: 100 years

Count Signal Input/Count Inhibit Signal

Input

■Sensor Type: Sink or source, DIP

switch selectable

■Input Impedance: 4.75k ohms to

+5V DC or 34.9 k Ohms to ground

■Thresholds —

❑High 3.5 to 28V DC

❑Low 0 to 1.9V DC, for single

ended signals

■Magnetic Pickup Range: 50 mV p-p

to 65 VRMS into 34.9 k Ohms

■Slow Response: 50 Hz max. (DIP

switch 2 and/or 5 ON)

■Flat Response: 10 kHz

Flow Signal Input (Analog Input Models)

■Types: 4 – 20 mA and 0 – 10V DC

■Input Impedance: 100 ohms (current

input), 1.27M ohms (voltage input)

■Overrange: 50 mA max (current

input), 100V max (voltage input)

■Accuracy: ±0.1% of reading, ±1 digit,

and ±80 PPM/°C

Control Inputs

■Sensor Type: Sink only

■Input Impedance: 4.75k ohms to

+5V DC

■Thresholds —

❑High 3.5 to 28V DC

❑Low 0 to 1.0V DC

■Response: 25 mS maximum

(5V signal)

Accessory Power Output (Pulse Input

Models)

■Voltage: 12V DC +10%/-13%

■Current: 75 mA max.

■Protection: Short circuit protected

Accessory Power Output (Analog Input

Models)

■Voltage: 24V DC ±10%

■Current: 90 mA max.

■Protection: Short circuit protected

Relay/Transistor Outputs (standard on

batch controls, optional on totalizers)

■Number: 2 relays or 1 relay and 1

transistor

■Relay Contact Type: 1 set form C per

relay

■Relay Contact Rating: 5A, 250V AC

or 30V DC

■Transistor Type: NPN, Opto Isolated

■OFF State Block: 30V DC max.,

0.1 mA max. leakage current

■ON State Conduct: 50 mA max.,

1.2V DC max. C-E drop

■Max. Switching Frequency: 4 kHz

(50-50 duty cycle)

■Isolation dielectric strength: 2300V

Optional Outputs

■Analog Retransmission —

❑Output signals: 4 – 20 mA (<750

1) and 0 – 10V (>2500 1)

❑Accuracy: 0.13% full scale and 100

PPM/°C (and 0.07% full scale

change over 4 – 20 mA load

ranges

❑Isolation dielectric strength:

2300V AC to signal inputs, relays

and AC power inputs; 500V AC to

analog outputs and DC power

inputs

■RS-485 Serial Communications

❑Baud Rate: 1200, 2400, 4800,

9600, or 19,200, programmable

❑Parity: Even, odd or no parity

❑Address Range: 00 to 99 decimal

(00 indicates off line)

❑Protocol: Opto 22® compatible

❑Isolation Dielectric Strength:

2300V AC to signal inputs, relays

and AC power inputs; 500V AC to

analog outputs and DC power

inputs

Environmental

■Operating Environment: Indoor use

to 2000 meters

■Temperature —

❑Operating: 32 to 122°F (0 to 50°C)

❑Storage: -4 to 158°F (20 to 70°C)

❑Humidity: 0 to 85% RH, non-

condensing

■Vibration: 2.5 Gs, 30 to 200 Hz

■Shock: 30 Gs, 11 mS half sinewave

■EMC —

❑Immunity to EN 50082-2 (Heavy

Industrial)

❑Emissions to EN 50081-2 (Heavy

Industrial)

■Front Panel: NEMA 4X when

mounted with gasket provided

■Agency Approval —

❑CE EMC immunity and emissions

requirements were met using

shielded wiring on the RS-485,

analog output and pulse input/

power lines. The shields were

connected to earth ground at the

Eclipse end of the shields.

■Pollution Degree 2: Overvoltage

Category II

Cat. No. 57750-400

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Flow Totalizers/Transmitters & Controls

Eclipse Series — Durant®

Catalog Number Selection

Table 71. Eclipse Flow Model Numbering System

Output Options 0, 2, 4 are not available for models -41X and -43X.

Dimensions

Figure 64. Eclipse Flow Models — Approximate Dimensions in Inches (mm)

5775 X - 4XX

Power Supply

0 = DC (9 – 30V DC)

1 = AC (85 – 265V AC)

Input Option

0 = Pulse Input

Totalizer/Ratemeter

1 = Pulse Input Batch Control

2 = Analog Input

Totalizer/Ratemeter

3 = Analog Input Batch Control

Output Option 

0 = No Option

1 = Dual Relays (Standard or Batch)

2 = Analog Output (4 – 20 mA

and 0 – 10V)

3 = Dual Relays and Analog Output

4 = RS-485 Communications

5 = Dual Relay and RS-485

6 = Analog Output and RS-485

7 = Dual Relays, Analog Output

and RS-485

A = One Relay, One Transistor

B = One Relay, One Transistor,

Analog Output

C = One Relay, One Transistor,

RS-485

D = One Relay, One Transistor,

Analog Output and RS-485

PGM

View

Edit

Enter

Start

Stop

Reset

PGM

BATCH

Durant

3.622 ±0 .031

(92.00 ±0.8)

Panel Cutout

4.04

(102.6)

3.31

(84.1)

3.63

(92.2)

0.27

(6.9)

2.19

(55.6) 1.772 ±0.02

(45 ±0.6)

Max. Panel Thickness

0.190 (4.83)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Special Function Controls

Basic Monitor Control

Contents

Description Page

Special Function Controls

Basic Monitor Control . . . . 74

Position Control . . . . . . . . . 75

Ambassador Series

Closed-Loop Speed

Control . . . . . . . . . . . . . . . . 77

Product Description

The BASIC monitor control (BMC) has

two count inputs. Eight other rear

terminal inputs and the fourteen front

panel keys are user deﬁnable. The

same is true for the two relay and ﬁve

transistor outputs. Conﬁguration is

done through a BASIC language pro-

gram entered by the user, putting the

BMC in specialized control applica-

tions where dedicated count controls

are not as well suited.

The 6460 sequential control can be

thought of as a counter and/or timer

with 500 presets. Most users load a

number of programs or “recipes” into

the 6460 and have the operator select

one recipe at a time to run. The 6460 is

often found in roll forming and coil

winding applications and is used on

induction heat treating scanners.

Application Description

Cut-to-Length Application

In a “typical” cut-to-length application,

raw stock is pulled from a coil through

straightening rollers, and fed past a

pneumatic shear. A quadrature encoder

riding on the stock sends pulses to a

counter that “measures” the amount of

stock fed. The primary counter function

Cat. No. 54420400

Cat. No. 56460400

is to supply an output signal to the shear

to cut the stock at a certain “preset”

length, then reset itself and start mea-

suring the next piece, and continue to

do so until the desired number of pieces

have been cut.

Modern counters provide two other

functions. The ﬁrst is the slowdown, or

“prewarn” output. The motor that

drives the stock through the machine

usually is run at a high speed until just

before the cutoff occurs. A prewarn out-

put from the counter to the drive drops

the motor speed so that the feed rate for

the stock slows to a “creep” speed that

is maintained until the ﬁnal cutoff preset

is reached. Due to variations in feed

speed and shear response, this creep

speed is necessary for achieving a

consistent cut length.

The second additional function of the

counter is to count the number of

pieces that are cut and stop the

machine when a preset number of

pieces is reached. This is done by a

second count register, called the batch

counter, inside the counter.

Features

BASIC Monitor Control

■6-digit, LED display

■0.56" (14.2 mm) high characters

■User deﬁned operation

■Utilizes BASIC language

■Outputs

❑4 NPN transistors

❑2 form-C relays

❑1 pulse-width modulated

■8 input lines

■8k bytes of programmable memory

■15V DC, 100 mA maximum output

power

■20 mA current loop communication

■Accepts 115/230V AC and 11 – 16V

DC input power

■NEMA 4 front panel

500 Level Sequence Controller

■500 programming levels

■32-character 2 line LCD display

0.315" (8 mm) high characters

■17 programmable count modes

■4 programmable jump inputs

■Millisecond timing

■Count scaling

■Rate, total and batch count

■16 NPN outputs

■24V DC @ 800 mA and 15V DC @

200 mA output power

■RS-232 communications

■85 – 265V AC and 24V DC input

power models

■Optional conﬁguration software

available

■NEMA 4 accessory kit

Standards and Certiﬁcations

■UL and cUL Listed, CE Marked

Product Selection

Table 72. Product Selection — Basic Monitor

Control

Dimensions

Figure 65. Dimensions — 54420400

Approximate Dimensions in Inches (mm)

Figure 66. Dimensions — 56460400

Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Basic Monitor Control 54420400

500 Level Sequence

Controller

56460400

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

3.04

(77.2)

5.80

(1 4 7. 3)

5.38

(136.7)

2.62

(66.7)

5.91

(150.1)

Panel Cutout: 5.433 x 2.677 (138 x 68)

5.35

(13 5. 9)

6.18

(157.0)

3.74

(95)

7.24

(183.9)

8.07

(205.0)

Panel Cutout: 7.32 x 5.43 (186 x 138)

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Special Function Controls

Position Control

Product Description

The 58868400 closed-loop position

control provides digital output signals

(run, direction and fast/slow) to a drive

to cause a motor-driven tool to be

positioned along a single axis. These

signals can also be used to control val-

ues in a hydraulic positioning system.

Typically, a quadrature encoder, cou-

pled to the drive mechanism, provides

the feedback signal to the position

control. Up to ﬁve destinations can be

automatically sequenced through in a

move-and-dwell process, or the opera-

tor can select a single destination for

move-and-stop positioning.

Features

■6-digit, LED display, 14 mm (0.56")

high characters

■4 move registers plus home

■2 Form C relays and 5 NPN

transistor outputs

■28 kHz count speed

■5 dwell time settings

■15V DC @ 100 mA power output

■Manual or automatic operation

■Programmable offset, prewarn and

kerf values

■Backlash compensation

■Programmable high/low limits

■20 mA current loop communications

■NEMA 4X front panel

Standards and Certiﬁcations

■UL Listed

Cat. No. 58868400

Technical Data and Speciﬁcations

Power Input

■AC Operation: 120/240V AC

± 10%, -20%), 47 to 63 Hz

■DC Operation: 11 to 16V DC

(0.7 Amp max.)

■Power Consumption: 18 Watts

maximum

DC Power Output

■15V DC (+1, -2), 100 mA maximum

Environment

■Operating Temperature: 32 to 130°F

(0 to 55°C)

■Storage Temperature: -40 to 160°F

(-40 to 71°C)

■Operating Humidity: 85% relative,

non-condensing.

■NEMA 4 rating when mounted with

gasket provided

Control Input Response

■Start/Stop: 1 mS

■Go home input: 5 mS

■Load Position: 5 mS

■Reference Input: 1.7 mS

Input Voltage

■Count Inputs —

❑High: 10.5 to 24.5V DC

❑Low: 0 to 4.5V DC

■Control Inputs —

❑High: 3.8 to 15.0V DC

❑Low: 0 to 1.2V DC

Input Impedances

■Count Inputs: 6.8 k1 to +15V DC

(2.2 mA at 0V DC)

■Control Inputs: 2.2 k1 to +5V DC

(2.3 mA at 0V DC)

Relay Outputs (2)

■Type: Form C contacts

■Load Voltage: up to 240V AC or

280V DC

■Load Current: 5A resistive, 1.5A at

80% PF

Transistor Outputs (5)

■Type: NPN open collector with surge

protection

■Load Voltage: 30V DC maximum

■Load Current: 300 mA maximum

■Saturation: 1.5V max. @ 300 mA

■Latency: 150 + 5 μS/1 kHz input

speed ± 10 μS

Communication

■Type: 20 mA loop (active transmit,

passive receive)

■Speed: 110, 300 or 1200 Baud

■Parity: Odd, even, space

■Format: 1 start bit, 7 data bits

(ASCII), 1 parity bit, 1 stop bit

(110 baud uses 2 stop bits)

■Load Voltage: 30V DC maximum

■Load Current: 300 mA maximum

■Saturation: 1.5V max. @ 300 mA

■Latency: 150 + 5 μS/1 kHz input

speed ± 10

Input Frequency

■The maximum input frequency only

on the selected quadrature

operation

Quadrature Selection

Note: Only function 60 and the double

jumper affect the maximum input speed.

The scale factor does not affect the input

speed.

Position Control Features

■Setpoints: Four move setpoints plus

one home setpoint

■Range for all setpoints is -99999 to

999999

■Decimal Point: Four positions,

programmable

■Dwell Times: Five, one for each

setpoint. Dwell time range is 00.01

to 99.98 seconds.

■Scale Factor: Scale factor range is

0.00100 to 9.999999.

■Accuracy: 100% when the position

control is operated within the

speciﬁed speeds and input voltages

X1 X2 X4

High Speed 28 kHz 14 kHz 7 kHz

Low Speed 150 Hz 150 Hz 150 Hz

Low speed jumper installed.

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Special Function Controls

Position Control

Product Selection

Table 73. Product Selection — Position Control

Dimensions

Figure 67. President Series Position Control — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Single-Axis Position Control 58868400

+ / -

DWELL

POSITION

RUN

MOVE

DWELL

Durant

START

STOP

FUNCTION

RECALL FAST JOG+

MOVE

JOG- POSITION

HOME

ENTER

5.80

(147.3)

5.38

(137)

5.91

(150)

Panel mounting clip fits into four

square holes in side of counter.

Recommended Panel Cutout: 5.43 W x 2.68 H (137.9 x 68.1)

Gaskets

Pt. #28720-216 (Standard)

Pt. #28720-217

Panel

Note:

Spacer Kit Pt. #38820-400

1 gasket standard.

2nd gasket and

spacer optional.

Use of optional

spacer and gasket

reduces unit depth

from 5.91 (150)

to 5.38 (137.3).

Spacer

Counter

Front

Bezel

3.04

(77.2)

2.62

(66.7)

19 20

+21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36

1234

NO C NO AC INPUTS NC C NO

IN1 IN2

5 6 7 8 9 10 11 12 13 14 15 16 17 18

588904

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Special Function Controls

Ambassador Series Closed-Loop Speed Control

Product Description

The Ambassador speed control pro-

vides a tightly regulated, isolated, 0 –

10V speed reference signal to a drive.

It is most often used in follower mode

applications, such as conveyor speed

matching/mis-matching, cable produc-

tion lay control, cable take-up reel tra-

versing mechanism speed control and

many others. In master mode, it is

most commonly used for constant

web speed take-up roll control, where

the increasing roll diameter requires

constant motor slowing over the

course of ﬁlling a roll. Also, where

feedback scaling and presets are

required in units other than RPM or Hz.

For instance, using a ﬂowmeter as the

feedback sensor, control the speed of a

motor-driven pump in units of gallons/

minute.

The two preset version offers addi-

tional features, such as reversing, and

remote preset adjustments by “bump-

ing” external pushbuttons.

Features

■2-line, 16-character, alphanumeric,

high visibility, LCD backlit, 7.5 mm

[0.3"] high character display

■1 or 2 speed presets

■Isolated 1 – 10V DC analog out

■Selectable master/slave/jog modes

■Proportional integral error

correction

■35 kHz frequency inputs

■±0.015% speed regulation

■12V DC @ 125 mA power output

■12-Bit DAC resolution

■RS-485 serial communications

■NEMA 4X front panel

Standards and Certiﬁcations

■UL Listed

Cat. No. 57401400

Technical Data and Speciﬁcations

Power Input

■57401-40X: 115V AC (±15%) std.,

50 to 60 Hz, 0.2A

■57402-40X: 230V AC (±15%) opt.,

50 to 60 Hz, 0. 1A

DC Power Output

■12V DC (±10%), 125 mA maximum

(includes all line and load

variations)

Environment

■Operating Temperature: 32 to 131°F

(0 to 55°C).

■Storage Temperature: -4 to 158°F

(-20 to 70°C).

■Operating Humidity: 85% Relative,

non-condensing

■NEMA 4X rated when mounted with

gasket provided

Speed Regulation (Closed Loop)

■Accuracy: ±0.015%

■Update Time: 5 mS

Frequency Inputs

■Current Sinking —

❑Impedance: 4.75K

❑Voltage Maximum: 24V DC

❑High threshold: 3.5V DC

❑Low threshold: 1.9V DC

❑Pulse Rate: 1 Hz – 35 kHz

■Magnetic —

❑Impedance: 16 k min.

❑Voltage —

– Maximum: 65V AC rms

– Maximum: 200 mV p-p

❑Pulse Rate: 1 Hz – 35 kHz

Control Inputs

■Impedance: 4.75k ohms to +5V DC

■Voltage —

❑High: +3.7 to +24V DC

❑Low: 0.0 to 0.9V DC

■Response: 40 Hz maximum

Control Outputs

■Type: NPN open-collector with

transient protection

■Max. Voltage (OFF state): 30V DC

■Max. Current (ON state): 200 mA at

1.3V DC

Drive Signal

■Separate power supply with 1500V

AC isolation

❑5740X-400:

– Resolution: 12 bits

– Full Scale Voltage: 10V DC

minimum into 5 mA

❑5740X-401:

– Resolution: 12 bits

– Full Scale Voltage: ±10V DC

minimum into 5 mA; Drive

Reference potentiometer

allows full scale voltage to be

reduced to less than ±3V DC

Communication

■Type: RS-485

■Format: 1 start bit, 1 parity bit, 1

stop bit, seven-bit ASC I I characters

■Protocol: Opto-22 compatible

■Speed: 300, 1200, 2400, 4800, 9600

and 19200 baud

■Parity: None

Connections

■Type: Unpluggable screw terminal

strips

■Conductor Size: 14 – 22 AWG

(2.1 – 0.38 mm2) 600V solid,

stranded or fused (preferred)

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Special Function Controls

Ambassador Series Closed-Loop Speed Control

Product Selection

Table 74. Product Selection — Closed Loop Speed Control

Dimensions

Figure 68. Closed Loop Speed Control — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

1 Preset, 115V AC

2 Presets, 115V AC

57401400

57401401

1 Preset, 230V AC

2 Presets, 230V AC

57402400

57402401

2.946 ±0.015

(74.83 ±0.38)

SPEED

250 F/M

2.946 ±0.015

(74.8 ±0.38)

2.677 ±0.028

(68.00 ±0.70)

2.677 ±0.028

(68.00 ±0.70)

Panel Cutout

Max. Panel

Thickness

0.50 (12.7)

5.60 ±0.03

(142.24 ±0.76)

PGM

CLR

VIEW

ADJ

STEP

•

EXIT ENT SEL

Gasket

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Fusion® Integrated Machine Control

Features and Beneﬁts

Product Description

The Fusion Integrated Machine Con-

trol has advanced features, including a

ﬁve-preset high speed counter with

prewarn, a totalizer with preset, a

batch counter with preset and a rate-

meter with high and low setpoints.

Unique to the count control world, the

Fusion has ﬁve output relays (rather

than two), along with two transistors

and two analog setpoint or follower

outputs. Its ten available parameter

sets of pre-loaded values are useful as

recipes, for job-stacking or for a vari-

ety of application-speciﬁc purposes.

The Fusion has a multi-line alphanu-

meric display which can be pro-

grammed to show text messages,

logic-generated prompts, alarms and

machine status. Up to eight screens

can be shown or optionally locked out.

Count and time presets can be made

view-only or editable. Preset entry is

achieved with simple 0-9 keys on the

front panel rather than complicated

scrolling methods. The Fusion’s real

time clock/calendar may be displayed

and/or used to time and date stamp

printouts.

With its ladder logic, the Fusion is

actually a 26 I/O controller, making it a

complete control for many machines

and processes, integrating the func-

tions of external timers, pushbuttons,

power supplies, indicating lights, con-

trol relays and other components in

the same box.

Cat. No. 57550400

Features

■User-conﬁgurable operator interface

with back-lit LCD display and 18-

button tactile feedback keypad

■High speed counter with 5 presets

and prewarn, totalizer, batch

counter and ratemeter

■10 parameter sets

■13 digital inputs

■(2) 4 – 20 mA inputs

■(2) 0 – 10V input

■(3) Form C, 2 Form A, 2 NPN

transistor, (1) 4 – 20 mA, & (1)

0 – 10V outputs

■RS-232 and RS-485 serial

communications

■100-line ladder logic processor for

ultimate ﬂexibility

■Conﬁguration software included

■NEMA 4X enclosure

Table 75. Features and Beneﬁts

Feature Customer Beneﬁt

High speed count functions; including scaling,

main counter, ﬁve presets, prewarn, totalizer,

batch and rate

“Canned” count functions offer ﬂexibility and

ease of setup in the desired units of measure.

High speed counting independent of ladder scan

time

Precise and repeatable output response for high

performance applications.

Flexible display with selectable character sizes

(large, medium, small), run screens and ladder

triggered messages.

Minimizes confusion and operator errors as

information can be tailored to what they need and

in their language. Maintenance/management data

can be separated. Different character sizes allow

optimization of information displayed. Machine

status information can be displayed allowing

operators to take action.

Simple front panel layout and keypad. Four soft

keys & six function keys can be used as inputs.

Ease of use for operator. Numeric keypad allows

for ease of preset and machine parameter entry.

Function keys and soft keys allow easy and quick

access to information and/or parameters needed

by the operator and don’t require using additional

inputs. Eliminates cost associated with external

pushbuttons and inputs.

Parameter sets Allows for predeﬁned recipes/jobs to be

preloaded for the operator. Simpliﬁes operator

interaction and minimizes errors.

Programmable relay logic Well understood programming method that

allows ﬂexibility in control functionality. Easy to

tailor the control to various applications.

26 I/O (digital & analog) Provides application ﬂexibility. Analog inputs

allow monitoring key process parameters. Analog

outputs allow interfacing to drives and other

control products.

Integrated solution Reduced overall control costs, installation and

commissioning. More ﬂexible and capable than

traditional count/control solutions but less

complex than many PLC solutions.

Windows® and front panel programming Ease of programming and conﬁguration control.

RS-232 and RS-485 serial communication ports Allow for direct connection to PC for

programming, connection to Modbus® networks,

interface to serial printer.

Robust type 4X package. DIN cutout and short

depth 2.82 Inches (71.6 mm).

Suited for wet applications. Same cutout as the

President Series — easing the migration. Short

depth minimizes the cost and size of the machine

panel or control enclosure.

Input power:

85 – 265V AC 50/60 Hz or 10 – 30V DC models

Greatly reduces models required for different

control voltages.

Output power:

12V DC @75 mA, 24V DC @100 mA

Eliminates the need for an external power supply

for encoders, analog transducers, etc.

Depluggable screw terminals Allows for ease of wiring and removal of control.

Terminals are different sizes to error-proof

installation.

Non-volatile memory and capacitor backed real

time clock

Don’t have to worry about a battery failing down

the road.

Real time clock Allows for control functions to be performed on

day/time and allows for date/time stamping on

printouts.

UL, cUL and CE Marked Ease of meeting machine agency requirements

and robust EMC performance.

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Fusion® Integrated Machine Control

Technical Data and Speciﬁcations

Standards and Certiﬁcations

■UL and cUL Listed; CE Marked

Technical Data and

Speciﬁcations

Environmental

■Operation: Indoor use to 2000m

■Temperature:

❑32 to 122°F (0 to 50°C) operating

❑-4 to 158°F (-20 to 70°C) storage

■Humidity: 0 to 85% RH,

non-condensing

■Vibration: 2.5 Gs, 30 – 200 Hz

■Shock: 30 Gs, 11 mS half

sinewave

■EMC:

❑EN61326:1997

❑All I/O lines except RS-485 <30m

■Front Panel:

❑Type 4X indoor use only, when

mounted with gasket provided

■

Safety: UL and cUL Listed, CE

Compliant

Input Power

■AC Model: 85 – 265V AC, 47 – 63 Hz,

20 VA; Isolation 2300V AC

■DC Model: 10 – 30V DC, 15 VA

Inputs

■Control:

❑Number: 10

❑Impedance: 4.75k Ohms to +5V DC

❑Thresholds:

– High 3.5 – 30V DC

– Low 0 – 1.0V DC

■Counter:

❑Number: 3 (including reset)

❑Impedance: 4.75k Ohms to +5V DC

or 26.9k Ohms to ground

❑Thresholds:

– High 3.5 – 30V

– Low 0 – 1.5V, or 200 mV p-p to

50V rms @ 26.9k Ohms (mag

pickup)

❑Response:

– 140 Hz or 14 kHz for sinking,

push-pull or mag pickup inputs

– 60 Hz or 6 kHz for sourcing only

inputs

– All frequencies based on 50-50

duty cycle

– 6 kHz maximum sustained

count speed

■Analog:

❑Number: 4

❑Type: 4 – 20 mA and two 0 – 10V DC

❑Accuracy: ± 0.5% FS and

± 200 PPM/°C

❑Impedance: 100 Ohms (current

input), 1.27M Ohms (voltage input)

❑Overrange: 45 mA max. (current

input), 20V max. (voltage input)

Outputs

■Power (AC input model only):

❑24V DC ± 15%, 100 mA max.,

short circuit protected

❑12V DC ± 10%, 75 mA max., short

circuit protected

■Relays:

❑Number: 3 (Form C), 2 (Form A)

❑Contacts: 5A, 250V AC, 30V DC

❑Isolation: 2300V AC

■Transistors:

❑Number: 2

❑Type: NPN Darlington

❑Ratings: 150 mA max. ON current,

30V DC max. OFF voltage

■Analog:

❑Number: 2, short circuit protected

❑Type: 4 – 20 mA (<450 Ohms),

0 – 10V (>2500 Ohms)

❑Accuracy: ± 0.5% FS and

± 200 PPM/°C

❑Common Mode Voltage Rating:

250V AC

❑Isolation: 2300V AC

■RS-232:

❑Connector: DB-9S

❑Polarity: DCE

❑Baud Rate: 1200 – 19200

■RS-485:

❑Connector: 6 wire RJ-12 phonejack

❑Baud Rate: 1200 – 19200

Data Retention

■Program Data:

❑Type: Non-volatile

❑Duration: 100 Years, no batteries

■Real Time Clock:

❑Type: Capacitor

❑Charge Time: 3 Minutes

❑Retention: 1 – 5 Days

Human Interface

■Display:

❑Type: 128 x 64 pixel graphic LCD

with LED backlight

❑Character Size:

–

0.12" (3 mm) high, 21 characters

per line, 6 lines maximum

–

0.24" (6 mm) high, 10 characters

per line, 3 lines maximum

– 0.35" (9 mm) high, 7 characters

per line, 2 lines maximum

■Keys:

❑Number: 18

❑Type: membrane switches with

tactile feedback

■Real Time Clock Format: Seconds,

minutes, hours, day and date

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Fusion® Integrated Machine Control

Product Selection

Table 76. Product Selection — Fusion Integrated Machine Control

Dimensions

Figure 69. Fusion Integrated Machine Control — Approximate Dimensions in Inches (mm)

Note: Recommended Panel Cutout is 0.375 Inch (9.5 mm) max. panel thickness.

Description Catalog

Number *

Fusion Integrated Machine Control — 10 – 30V DC Power

Fusion Integrated Machine Control — 85 – 265V AC Power

Fusion Conﬁguration Software

57550400

57551400

57590400

Durant

123

xxxx

L1 L2

222RUN3

45678910 11121314 15151617

P/N 57551 400

123

5.33 (135.5)

6.18 (157) 2.50 (63.5)

2.79 (70.8)

5.433±0.039

(138±1)

3.42

(86.9)

2.57

(65.3)

2.677±0.028

(68±0.7)

0.38

(9.7)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

DIN Rail Adapter

Contents

Description Page

Accessories

DIN Rail Adapter . . . . . . . . . 82

Vane Pickup Sensor . . . . . . 83

C-Face Ring

Tachometer . . . . . . . . . . . . 83

Magnetic Pickup Sensor

and Gear . . . . . . . . . . . . . . 83

Rotary Contactor . . . . . . . . . 84

Measuring Wheels . . . . . . . 84

Encoders

Cube Style . . . . . . . . . . . . . . 85

Heavy Duty . . . . . . . . . . . . . 87

Right Angle, Size 20 . . . . . . 89

Features

■

For panel-mounting all DIN size

counters, timers and process

indicators 0.94 x 1.89 Inch (24 x 48

mm) or 1.97 x 0.98 Inch (50 x 25 mm)

■

Cut-out: 0.98 x 1.97 Inch (25 x 50 mm)

■For snap-on ﬁtting to 35 mm top hat

DIN rails

■Construction —

❑Mounting panel for counter:

Chrome-plated sheet steel

❑Top hat DIN rail adapter: Glass

ﬁber reinforced polymide

Cat. No. A2448DINADAPT

Product Selection

Table 77. Product Selection — DIN Rail Adapter

Dimensions

Figure 70. DIN Rail Adapter — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

DIN Rail Adapter for 1/32 DIN Panel Mount Devices A2448DINADAPT

3.98 (101.0)

1.77

(45.0)

3.29

(83.5)

2.95

(75.0)

1.77

(45.0)

2.76

(70.0)

1.0

(25.4)

1.98 (50.4)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-1

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Accessories

Vane Pickup Sensor

Features

■10 – 15V DC input power

■35 mA current draw

■10-foot (3m) shielded cable

■Environmentally sealed

■3000 Hz maximum speed

Table 78. Product Selection — Vane Pickup Sensor

C-Face Ring Tachometer

Features

■5 – 16V DC input power

■NPN transistor output, 20 mA sinking capacity

■60 pulses per resolution

■Zero speed pickup

■Variety of motor C-face sizes: 56, 184, 254, 256

■39 to 225°F (4 to 107°C) operating temperature

Table 79. Product Selection — C-Face Ring Tachometer

Magnetic Pickup Sensor and Gear

Features

Magnetic Pickup

■0.25" (6.4 mm) diameter

■Ideal for tachometer and rate control applications

■-40 to 298°F (-40 to 148°C) operating temperature

■Output is AC signal, amplitude proportional to speed of

target

■10-foot (3m) cable attached

■L-Mounting bracket included

30-Tooth Gear Accessory

■1.6" (41 mm) diameter

■0.275" (7 mm) bore diameter

■Mounting set screw included

Table 80. Product Selection — Magnetic Pickup Sensor and Gear

Description Catalog

Number *

Vane Pickup Sensor with 10-foot (3m) Cable 39400400

Description Catalog

Number *

C-Face Sensor

Motor Size 56C 47007056

Motor Size 143TC, 145TC, 182C, 184C 47007184

Motor Size 184TC, 213C, 215C, 254C 47007215

Cat. No. 39400400

Cat. No. 47007056

Description Catalog

Number *

Magnetic Pickup 47004400

30-Tooth Gear for Magnetic Pickup 28433400

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-3

* Consult Sales Ofﬁce for Pricing

Cat. No. 47004400 and 28433400

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Accessories

Rotary Contactor

Features

■No power required

■Reed switch output models for electronic counters

■Contact closure output

■Leaf switch output models for electromechanical counters

■5/16" (7.9 mm) double shaft, 2400 rpm max. at 1:1 ratio

■12" (304.8 mm) wire leads

Table 81. Product Selection — Rotary Contactor

Measuring Wheels

Features

■For use with shaft encoders and rotary contactors

■12-inch (304.8 mm) meter circumference

■Urethane, rubber and knurled edges available

Table 82. Product Selection — Measuring Wheels

Description Catalog

Number *

Rotary Contactor

12:1 Ratio Reed Switch Output

10:1 Ratio Reed Switch Output

39100400

39100401

1:1 Ratio Reed Switch Output

1:3 Ratio Reed Switch Output

1:3.28 Ratio Reed Switch Output

1:10 Ratio Reed Switch Output

41100400

41100401

41100402

41100403

1:10 Ratio Leaf Switch Output

1:1 Ratio Leaf Switch Output

1:3 Ratio Leaf Switch Output

40892400

40891400

40892401

Cat. No. 39100400

Description Catalog

Number *

1-Foot Circumference Measuring Wheel

5/16" Bore, Urethane Rim

3/8" Bore, Urethane Rim

20144300

20144303

5/16" Bore, Rubber Rim

3/8" Bore, Rubber Rim

20154300

20154301

5/16" Bore, Knurled Rim

3/8" Bore, Knurled Rim

20156300

20156301

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-3

* Consult Sales Ofﬁce for Pricing

Measuring Wheel

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Shaft Encoders — Cube Style

Features

■5 – 28V DC input power

■80 mA current draw

■NPN transistor output, 250 mA

sinking capacity

■Square wave output (50-50 duty

cycle)

■Single channel and quadrature

models

■Up to 600 pulses per revolution

■3/8" (9.5 mm) double ended shaft

■ABEC 3 double sealed ball bearings

■Tapped holes for face or base

mounting

■Military style connector

Cat. No. 38150600

Technical Data and Speciﬁcations

Electrical

■Input (38150) —

❑Voltage: 9 to 16V DC

❑Current: 60 mA max. @ 16V DC

❑Ripple: 2%

■Input (38151) —

❑Voltage: 5 to 28V DC

❑Current: 60 mA nom., 100 mA

max.

❑Ripple: ) 2%

■Output —

❑Type: Current sinking transistor

with 1.5 k1 pull-up

– Sinking current: 100 mA max.

– Max. voltage @ 100 mA: 1.3V DC

– Blocking voltage: 40V DC max.

❑Polarity: Positive

❑Wave Shape: Square wave

❑Pulse Rate —

– 38150: 1 to 20,000 pulse per

second

– 38151: 1 to 10,000 pulse per

second

❑Rise Time: < 1 μS

❑Pulses per Rev.: 1 to 1270

❑Accuracy: Within ± 0.1°

Environmental

■Operating Temperature: 32 to 167°F

(0 to 75°C)

■Vibration: 3 Gs at 5 to 1000 cps

■Shock: 20 Gs, 10 mS

Mechanical

■Shaft Speed: 6000 RPM max.

■Shaft Rotation: CW or CCW

■Bearings: Sealed ball bearings

■Starting Torque: 0.1 oz-in

■Moment of Inertia: 0.0025 ounce

inch-sec2

■Radial Loading: 50 pounds

operating

■Axial Loading: 10 pounds operating

■Shaft: 3/8" (9.5 mm) dia.

■Operating Life: Up to 100,000 hours,

depending on speed

■Housing: Aluminum with black

anodized ﬁnish. Sealed against dust,

oil, vapor and moisture.

■Mounting: Bottom or front face

■Weight: 1 lb. (0.5 kg) max.

■Connector: MS-3102E-14S-6P

■

Mating Connector: MS-3106A-14S-6S

with 10' (3m) shielded cable and

termination for electronic controls

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Shaft Encoders — Cube Style

Product Selection

Table 83. Product Selection — Cube Shaft Encoders

Dimensions

Figure 71. Cube Shaft Encoders — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Single Channel

60 Pulses per Revolution

100 Pulses per Revolution

120 Pulses per Revolution

600 Pulses per Revolution

38150060

38150100

38150120

38150600

Quadrature

60 Pulses per Revolution

100 Pulses per Revolution

120 Pulses per Revolution

600 Pulses per Revolution

38151060

38151100

38151120

38151600

0.70

(17.8)

0.50

(12.7)

0.33

(8.3)

0.38

(9.5)

2.25

(57.2) (4) 6.32 (160.5) Tapped Holes

0.25 (6.4) Deep on 2.00 (50.8) B.C.

(4) 6.32 (160.5) Tapped Holes

0.25 (6.4) Deep on 2.00 (50.8) B.C.

(Same Mtg. Holes on

Opposite End and Bottom)

0.25

(6.4)

0.06

(1.6)

2.25

(57.2)

45°

2.25

(57.2)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Shaft Encoders — Heavy Duty

Features

■5 – 28V DC input power

■80 mA current draw

■NPN transistor output, 250 mA

sinking capacity

■Square wave output

■Single channel and quadrature

models

■3/8" (9.5 mm) single ended shaft

■ABEC 3 double sealed ball bearings

■Tapped holes for face or base

mounting

■Military style connector

Cat. No. 48370060

Technical Data and Speciﬁcations

Electrical

■Input —

❑Voltage: 5 to 28V DC

❑Current: 60 mA nom., 100 mA

max.

❑Ripple: -2%

■Output —

❑Type: Current sinking transistor

with 1.5 k1 pull-up

– Sinking current: 100 mA max.

– Max. voltage @ 100 mA: 1.3V DC

– Blocking voltage: 40V DC max.

❑Polarity: Positive

❑Wave Shape: Square wave (50-50

duty)

❑Pulse Rate: 0 to 20,000 pulse per

second

❑Rise Time: < 1 μS

❑Pulses per Rev.: 1 to 1270

❑Accuracy: Within ± 0.1° or 6 arc

minutes

Environmental

■Operating Temperature: 32 to 167°F

(0 to 75°C)

■Vibration: 3 Gs at 58 to 500 cps

■Shock: 50 Gs, 11 mS duration

Mechanical

■Shaft Speed: 6000 RPM max.

■Shaft Rotation: CW or CCW

■Bearings: Sealed ball bearings

■Starting Torque: 1.0 oz-in

■Radial Loading: 50 pounds

operating

■Axial Loading: 35 pounds operating

■Shaft: 3/8" (9.5 mm) dia.

■Housing: Aluminum with black

painted ﬁnish. Sealed against dust,

oil, vapor and moisture.

■Mounting: Provisions for bottom or

front face

■Weight: 3.25 lbs. (1.47 kg) max.

■Connector: MS-3102E-14S-6P

■

Mating Connector —

❑

MS-3106A-14S-6S

with 10' (3m)

shielded cable and termination

for electronic controls

(Part No. 29665-300)

❑Connector, clamp and bushing

only (Part No. 29729-300)

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Shaft Encoders — Heavy Duty

Product Selection

Table 84. Product Selection — Heavy Duty Encoder

Dimensions

Figure 72. Heavy Duty Encoder — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

Single Channel

60 Pulses per Revolution

100 Pulses per Revolution

120 Pulses per Revolution

600 Pulses per Revolution

48370060

48370100

48370120

48370600

Quadrature

60 Pulses per Revolution

100 Pulses per Revolution

600 Pulses per Revolution

48371060

48371100

48371120

48371600

0.70

(17.8) 0.81

(20.6)

1.50

(38.1)

6.00

(152.4)

1.18

(30.0)

1.50

(38.1)

1.13

(28.6)

Dia. 0.38 (9.5)

Shaft

with Flat 2.00 (50.8) Bolt Hole CircleMounting Holes (Typical)

1/4-20, 0.55 (14.0) Deep

on 2.00 (50.8) B.C.

3.00

(76.2)

0.06

(1.6)

3.00

(76.2)

45°

3.00

(76.2)

1.50

(38.1)

1.50

(38.1)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

April 2007

PG05400001E For more information visit: www.eaton.com

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Shaft Encoders — Right Angle, Size 20

Features

■5 – 28V DC input power

■100 mA current draw

■NPN transistor output, 100 mA

sinking capacity

■Quadrature output, 2 square waves

■Up to 1800 pulses per revolution

■Flange mounting

■3/8" (9.5 mm) shaft diameter

■Double shielded ball bearings

■Military style connector

Cat. No. 38159100

Technical Data and Speciﬁcations

Electrical

■Input

❑Voltage: 5 to 28V DC (4.75 min.,

28.0 max.)

❑Current: 100 mA max. with no

output load

❑Ripple: -2% peak to peak at 5V DC

■Output

❑Type: Quadrature current sinking

transistors with 2.2 k1 pull-up

❑Sinking current: 100 mA max.

❑Max. voltage @ 100 mA: 1.3V DC

❑Blocking voltage: 40V DC max.

❑Polarity: Positive

❑Wave Shape: Square wave (50-50

duty cycle)

❑Pulse Rate: 0 to 100,000 pulses

per second

❑Noise Immunity: Tested to BS

EN6100-4-2; IEC801-3; BS

EN61000-4-4; DDENV 50141;

DDENV 50204; BS EN55022 (with

European compliance option)

❑

Symmetry: 180 electrical degrees

± 18

❑Quadrature Phasing: 90 electrical

degrees ± 36

❑Minimum Edge Separation: 54

electrical degrees

❑Rise Time: < 1 μS

❑Pulses per Rev.: 1 to 1270

❑Accuracy: Within ± 0.1°

Environmental

■Operating Temperature: 32 to 158°F

(0 to 70°C)

■Vibration: 20 Gs at 50 to 500 cps

■Shock: 75 Gs, 11 mS

Mechanical

■Shaft Speed: 8000 RPM max.

■Shaft Rotation: CW or CCW

■Bearings: Double shielded ball

bearings

■Starting Torque: 1.0 oz-in typical

■Moment of Inertia: 5.2 x 104 ounce

inch-sec2

■Radial & Axial Loading: (80 lbs

max.) 20 – 40 lbs for bearing life of

1.5x109 revolutions

■Maximum Acceleration: 1x105

Radians/second2

■Shaft: 0.375" (9.5 mm) dia.

■Housing: Black non-corrosive ﬁnish.

Sealed against dust, oil, vapor and

moisture.

■Mounting: Flange mount

■Weight: 11 oz (312 g)

■Connector: MS-3102E-14S-6P

■Mating Connector —

❑

MS-3106A-14S-6S

with 10' (3m)

shielded cable and termination

for electronic controls

(Part No. 29665-300)

❑Connector, clamp and bushing

only (Part No. 29729-300)

April 2007

For more information visit: www.eaton.com PG05400001E

Counters, Panel Meters, Tachometers and Timers

Accessories and Encoders

Shaft Encoders — Right Angle, Size 20

Product Selection

Table 85. Product Selection — Right-Angle Shaft Encoder, Size 20

Dimensions

Figure 73. Right-Angle Shaft Encoder — Approximate Dimensions in Inches (mm)

Description Catalog

Number *

100 Pulses per Revolution

120 Pulses per Revolution

600 Pulses per Revolution

38159100

38159120

38159600

1000 Pulses per Revolution

1800 Pulses per Revolution

381591000

381591800

2.06

(52.3)

1.41

(35.9)

1.18

(30)

6-32 UNC

0.25 (6.4) Deep 4 x 90°

Dia. 2.0 (50.8) B.C.

Dia. 0.16 (4.0)

Through 4 x 90°

Dia. 2.48 (62.9) B.C.

0.05

(1.3) 0.05

(1.3)

0.30

(7.6) 2.0

(50.8)

0.60

(15.2)

2.0

(50.8)

0.80

(20.3)

0.75

(19.1)

Shaft Size

3/8" 0.3745 (9.512)

0.63

(15.9)

0.87

(22.1)

Side Mount

MS Style

Connector

1.75

(44.5)

2.06

(52.3)

Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . CC-4

* Consult Sales Ofﬁce for Pricing

Printed in USA

Form No. PG05400001E

April 2007

Eaton Corporation

Electrical Group

1000 Cherrington Parkway

Moon Township, PA 15108

United States

877-ETN CARE (877-386-2273)

Eaton.com

Eaton’s electrical business is a global leader in

electrical control, power distribution, uninterruptible

power supply and industrial automation products and

services. Eaton’s global electrical brands, including

Cutler-Hammer®

, Powerware®

, Holec® and MEM®

provide customer-driven PowerChain ManagementTM

solutions to serve the power system needs of

the industrial, institutional, government, utility,

commercial, residential, IT, mission critical and

OEM markets worldwide.

Eaton Corporation is a diversified industrial

manufacturer with 2006 sales of $12.4 billion. Eaton is

a global leader in electrical systems and components

for power quality, distribution and control; fluid

power systems and services for industrial, mobile and

aircraft equipment; intelligent truck drivetrain systems

for safety and fuel economy; and automotive engine

air management systems, powertrain solutions and

specialty controls for performance, fuel economy and

safety. Eaton has 60,000 employees and sells products

to customers in more than 125 countries. For more

information, visit www.eaton.com.