0.126 (3.2)
0.110 (2.8)
0.043 (1.1)
0.035 (0.9)
0.039 (1.0)
0.087 (2.2)
0.071 (1.8)
0.087 (2.2)
0.071 (1.8)
CATHODE MARK
FRONT
TOP
BACK
0.020 (0.50)
0.035 (0.9)
R0.017 (0.4)
0.016 (0.4)
POLARITY
NOTE:
Dimensions for all drawings are in inches (mm).
PACKAGE DIMENSIONS
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
APPLICATIONS
• LCD edge-lighting
• Edge card edge-lighting
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
FEATURES
• Small footprint - 3.0(L) X 2.0(W) X 1.0(H) mm
• AllnGaP technology for -R, -E, -O, -Y and -AG
• InGaN/SiC technology for -IG and -IB
• Wide viewing angle of 120°
• Water clear optics
• Available in 0.315” (8mm) width tape on 7” (178mm) diameter reel; 2,000 units per reel
DESCRIPTION
These super bright right angle surface mount chip LEDs emit light in the lateral direction. Small size and wide viewing angle make
these LEDs ideal choices for status indication in consumer electronics, industrial control and other applications.
2001 Fairchild Semiconductor Corporation
DS300215 8/30/01 1 OF 8 www.fairchildsemi.com
Parameter Symbol QTLP610C Units
-IB -IG
Continuous Forward Current IF30 30 mA
Peak Forward Current IFM 100 100 mA
(f = 1.0 KHz, Duty Factor = 1/10)
Reverse Voltage (IR = 10 µA) VR 55V
Power Dissipation PD120 120 mW
Operating Temperature TOPR -40 to +85 °C
Storage Temperature TSTG -40 to +90 °C
Lead Soldering Time TSOL 260 for 5 sec °C
ABSOLUTE MAXIMUM RATINGS (TA=25°C Unless otherwise specified)
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
Parameter Symbol QTLP610C Units
-R -E -O -Y -AG
Continuous Forward Current IF30 30 30 25 30 mA
Peak Forward Current IFM 160 160 160 120 160 mA
(f = 1.0 KHz, Duty Factor = 1/10)
Reverse Voltage (IR = 10 µA) VR 555 5 5 V
Power Dissipation PD72 72 72 60 72 mW
Operating Temperature TOPR -40 to +85 °C
Storage Temperature TSTG -40 to +90 °C
Lead Soldering Time TSOL 260 for 5 sec °C
ABSOLUTE MAXIMUM RATINGS (TA=25°C Unless otherwise specified)
www.fairchildsemi.com 2 OF 8 8/30/01 DS300215
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
Part Number Symbol QTLP610C Condition
-IB -IG
Luminous Intensity (mcd)
Minimum IV20 60 IF= 20mA
Typical 30 100
Forward Voltage (V)
Maximum VF4.0 4.0 IF= 20mA
Typical 3.5 3.5
Wavelength (nm) DP
Peak 465 520 IF= 20mA
Dominant DD470 525
Spectral Line Half Width (nm) D 25 35 IF= 20mA
Viewing Angle (°) 201/2120 120 IF= 20mA
ELECTRICAL / OPTICAL CHARACTERISTICS (TA=25°C)
Part Number Symbol QTLP610C Condition
-R -E -O -Y -AG
Luminous Intensity (mcd)
Minimum IV20 20 20 20 10 IF= 20mA
Typical 45 45 45 45 20
Forward Voltage (V)
Maximum VF2.4 2.4 2.4 2.4 2.4 IF= 20mA
Typical 2.0 2.0 2.0 2.0 2.0
Wavelength (nm) DP
Peak 630 620 610 590 575 IF= 20mA
Dominant DD624 615 605 589 573
Spectral Line Half Width (nm) D 20 18 18 15 20 IF= 20mA
Viewing Angle (°) 201/2120 120 120 120 120 IF= 20mA
ELECTRICAL / OPTICAL CHARACTERISTICS (TA=25°C)
DS300215 8/30/01 3 OF 8 www.fairchildsemi.com
IF - DC FORWARD CURRENT (mA)
RELATIVE LUMNOUS INTENSITY
(NORMALIZED AT 20 mA)IF - FORWARD CURRENT (mA)
Fig. 2 Relative Luminous Intensity
vs. DC Forward Current
2.5
2.0
1.5
1.0
0.5
0.0
01020304050
100
90
80
70
60
50
40
30
20
10
0
1.0 1.5 2.0 2.5 3.0
VF - FORWARD VOLTAGE (V)
IF - FORWARD CURRENT (mA)
Fig. 1 Forward Current vs. Forward Voltage
-80˚ 80˚
-70˚ 70˚
-60˚ 60˚
-50˚ 50˚
-40˚ 40˚
-30˚ 30˚
-20˚ 20˚
-10˚ 10˚
0˚
1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0
-90˚ 90˚
REL. LUMINOUS INTENSITY (%) AMBIENT TEMPERATURE TA (˚C)
50
40
30
20
10
00 255075100
Fig.5 Maximum Forward Current
vs. Ambient Temperature
Fig.4 Radiation Diagram
Fig. 3 Relative Intensity vs. Peak Wavelength
1.0
0.5
0
500 550 600 650 700
RELATIVE INTENSITY
WAVELENGTH (nm)
AG Y O E R
R, E, O and AG
Y
TYPICAL PERFORMANCE CURVES (QTLP610C-R, -E, -O, -Y and -AG)
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
www.fairchildsemi.com 4 OF 8 8/30/01 DS300215
IF - DC FORWARD CURRENT (mA)
RELATIVE LUMNOUS INTENSITY
(NORMALIZED AT 20 mA)IF - FORWARD CURRENT (mA)
Fig. 2 Relative Luminous Intensity
vs. DC Forward Current
2.5
2.0
1.5
1.0
0.5
0.0
01020304050
100
90
80
70
60
50
40
30
20
10
0
2.0 2.5 3.0 3.5 4.0 4.5 5.0
VF - FORWARD VOLTAGE (V)
IF - FORWARD CURRENT (mA)
Fig. 1 Forward Current vs. Forward Voltage
-80˚80˚
-70˚70˚
-60˚60˚
-50˚50˚
-40˚40˚
-30˚30˚
-20˚20˚
-10˚10˚
0˚
1.0 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0
-90˚90˚
REL. LUMINOUS INTENSITY (%) AMBIENT TEMPERATURE TA (˚C)
50
40
30
20
10
00 255075100
Fig.5 Maximum Forward Current
vs. Ambient Temperature
Fig.4 Radiation Diagram
Fig. 3 Relative Intensity vs. Peak Wavelength
1.0
0.5
0
400 450 500 550 600 650
RELATIVE INTENSITY
WAVELENGTH (nm)
IB IG
IG
IB
TYPICAL PERFORMANCE CURVES (QTLP610C-IG and -IB)
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
DS300215 8/30/01 5 OF 8 www.fairchildsemi.com
60 - 120 sec
Preheating
+5° C/s MAX -5° C/s MAX
120 - 150° C MAX
5 sec MAX
soldering time
240° C MAX
0.059 (1.50)
0.079 (2.00)
0.197 (5.00)
0.008 (0.20)
0.035 (0.90)
0.035 (0.90)
RECOMMENDED PRINTED CIRCUIT BOARD PATTERN
RECOMMENDED IR REFLOW SOLDERING PROFILE
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
;;
;;
yy
yy
;;yy
;
;
y
y
Light Emitting Direction
Mounting Example
www.fairchildsemi.com 6 OF 8 8/30/01 DS300215
Ø12.75
Ø62.0±0.5
Ø180±1
2.5±0.5
11.0
+0.5
-0.0
+0.25
-0.0
+1.5
8.4
-0.0
2.50±0.5
Progressive direction
Polarity
1.75
2.0±0.05 Ø1.55.±05
3.5±0.05
4.0 0.23±0.1
4.0
Dimensional tolerance is ± 0.1mm unless otherwise specified
Angle: ± 0.5
8.0
Unit: mm
2.06 1.32
3.20
TAPE AND REEL DIMENSIONS
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
DS300215 8/30/01 7 OF 8 www.fairchildsemi.com
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO
ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME
ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED
HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF
OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical
implant into the body,or (b) support or sustain life,
and (c) whose failure to perform when properly
used in accordance with instructions for use provided
in labeling, can be reasonably expected to result in a
significant injury of the user.
2. A critical component in any component of a life support
device or system whose failure to perform can be
reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
QTLP610C-R Red QTLP610C-E Orange QTLP610C-O Yellow-Orange
QTLP610C-Y Yellow QTLP610C-AG Yellow-Green QTLP610C-IG True Green
QTLP610C-IB Blue
SURFACE MOUNT LED LAMP
SUPER BRIGHT RIGHT ANGLE
www.fairchildsemi.com 8 OF 8 8/30/01 DS300215