*R oH S CO M PL IA N T Features Wirewound and Hybritron(R) elements Designed for HMI and MMI applications High rotational life Dual gang option Optional 0.1 % linearity Servo mount option Optional A/R lug Dual ball bearing option RoHS compliant* Suitable for use under some side load conditions 3549 - 10-Turn Precision Potentiometer Electrical Characteristics1 Wirewound Element Hybritron(R) Element Standard Resistance Range..................................................................100 to 100K ohms ..................................................1K to 100K ohms Total Resistance Tolerance....................................................................3 % .......................................................................10 % Independent Linearity ............................................................................0.2 % ....................................................................0.2 % Independent Linearity (Maximum Practical) ..........................................0.1 % ....................................................................0.1 % Effective Electrical Angle .......................................................................3600 +10 , -0 ....................................................3600 +10 , -0 Absolute Minimum Resistance/End Voltage ..........................................1 ohm or 0.1 % maximum ......................................0.2 % maximum (whichever is greater) Noise/Output Smoothness ....................................................................100 ohms maximum ...............................................0.10 % maximum Max. Wiper Current @ 5K ohms ...........................................................20 mA ..................................................................... 10 mA Dielectric Withstanding Voltage (MIL-STD-202, Method 301) Sea Level ...........................................................................................1,000 VAC minimum .............................................. 1,000 VAC minimum Insulation Resistance (500 VDC) ..........................................................1,000 megohms minimum ...................................... 1,000 megohms minimum Resolution..............................................................................................See How to Order chart ........................................ Essentially infinite Power Rating (Voltage Limited By Power Dissipation) +70 C................................................................................................2 watts .................................................................... 2 watts +125 C..............................................................................................0 watt...................................................................... 0 watt Environmental Characteristics1 Operating Temperature Range Dynamic .............................................................................................-40 C to +125 C ................................................... -40 C to +125 C Static ..................................................................................................-55 C to +125 C ................................................... -55 C to +125 C Temperature Coefficient (Over Static Temperature Range) ..................50 ppm/C ............................................................ 100 ppm/C Temperature Cycling (5 Cycles Over Static Temperature Range) .........2 % TR shift max. ................................................. 4 % TR shift max. Vibration (15 Gs, 10 Hz to 2 kHz) Wiper Bounce ....................................................................................0.1 ms max............................................................. 0.1 ms max. Shock (100 Gs, 6 ms sawtooth) Wiper Bounce ....................................................................................0.1 ms max............................................................. 0.1 ms max. Load Life (1,000 hours @ 70 C)...........................................................2 % TR shift .......................................................... 5 % TR shift max. Rotational Life No Load or Powered ..........................................................................2,000,000 shaft revolutions .................................... 5,000,000 shaft revolutions No Load or Powered (Dual Ball Bearing) ..........................................N/A ......................................................................... 10,000,000 shaft revolutions Moisture Resistance (Mil-Std-202, Method 103) ...................................2 % TR shift max. ................................................. 5 % TR shift max. IP Rating ................................................................................................IP 50 ....................................................................... IP 50 Mechanical Characteristics1 Mechanical Angle ...........................................................................................................................................................................................3600 +10 , -0 Backlash .................................................................................................................................................................................................................... 1.0 max. Stop Strength.......................................................................................................................................................................................53 N-cm (75 oz-in.) min. Torque Starting ........................................................................................................................................................................................0.5 N-cm (0.7 oz.-in.) max. Running .......................................................................................................................................................................................0.5 N-cm (0.7 oz.-in.) max. Clutch................................................................................................................................................................................1.0 to 4.2 N-cm (1.5 to 6.0 oz.-in.) Mounting .......................................................................................................................................................................... 170-200 N-cm (15-18 in.-lb.) max. Shaft Runout T.I.R. ..................................................................................................................................................................................... 0.08 mm (0.003 in.) Lateral Runout T.I.R.................................................................................................................................................................................... 0.13 mm (0.005 in.) Shaft End Play T.I.R. .................................................................................................................................................................................. 0.15 mm (0.006 in.) Shaft Radial Play T.I.R................................................................................................................................................................................ 0.08 mm (0.003 in.) Pilot Diameter Runout T.I.R. ....................................................................................................................................................................... 0.08 mm (0.003 in.) Weight Single ...................................................................................................................................................................................................... 20 gm (0.7 oz.) typ. Dual ....................................................................................................................................................................................................... 36 gm (1.27 oz) typ. Shaft Side Load (Max. Allowable) Nickel Plated Brass Shaft w/Brass Bushing ................................................................................................................................................. 50 gmf (1.7 ozf) Stainless Steel Shaft w/Bronze Bushing .................................................................................................................................................... 250 gmf (8.8 ozf) Terminals .............................................................................................................................................................................................. Gold-plated solder lugs Soldering Condition Manual Soldering ........................................................... 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire, 370 C (700 F) max. for 3 seconds Wave Soldering ...................................................................................96.5Sn/3.0Ag/0.5Cu solder with no-clean flux, 260 C (500 F) max. for 5 seconds Wash processes .......................................................................................................................................................................................Not recommended Mounting Hardware ............................................................................................. One lockwasher and one mounting nut is shipped with each potentiometer Recommended Panel Thickness (Bushing Mount) ..................................................................................................................2.46-3.81 mm (0.097-0.150 in.) Marking ...........................................................................................................................Manufacturer's symbol, model number, product code and date code Standard Packaging ........................................................................................................................................................................... Plastic trays (5 pcs./tray) 1At room ambient: +25 C nominal and 50 % relative humidity nominal, except as noted. For other options, please consult factory. *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3549 - 10-Turn Precision Potentiometer Product Dimensions Single Gang, Bushing Mount 18.446 0.381 (.726 .015) 2 1 Dual Gang, Bushing Mount 40.259 0.762 (1.585 .030) MOUNTING SURFACE 14.046 0.381 (.553 .015) 5.715 0.381 (.225 .015) 10.287 + 0.00/-0.05 (.405 +0.00/-.002) 3 39.243 0.762 (1.545 .030) 34.798 0.762 (1.370 .030) 26.467 0.762 (1.042 .030) 18.796 0.381 (.740 .015) BUSHING TYPE "B" 14.351 0.381 (.565 .015) 6.02 0.381 (.237 .015) 0.762 R (.030) 2 1 3 2 1 SHAFT DIMENSION "A" 10.287 + 0.00/-0.05 (.405 +0.00/-.002) BUSHING TYPE "B" 3 ADJUSTMENT SLOT: 0.813 0.813 WIDE X DEEP (.032) (.032) SHAFT DIMENSION "A" 1.524 0.254 (.060 .010) 7.92 0.381 (.312 .015) 19.812 0.812 (.780 .032) 20.617 0.787 (.812 .031) 1.52 (.060) 7.92 0.381 (.312 .015) 20.643 0.787 (.813 .031) 0.813 .0004 0.813 WIDE X ADJ. SLOT: DEEP (.032 .010) (.032) 30 5 OPTIONAL ANTIROTATIONAL PIN 6.86 0.25 (.270 .010) R 16.256 (.640) MAX. MOUNTING SURFACE 12.7 0.254 (.500 .010) 1.524 +.000/-0.127 (.060 +.000/-.005) DIA. 1.016 (.040) OPTIONAL ANTI-ROTATIONAL PIN 22.479 0.812 DIA. (.885 .032) 2 CCW 30 5 OPTIONAL ANTIROTATIONAL PIN WIPER 3 1 DIA. 12.649 0.254 (.498 .010) MOUNTING FACE CW CLOCKWISE TOLERANCES: EXCEPT WHERE NOTED .50 .127 .0127 DECIMALS: .XX (.02) .XXX (.005) .XXXX (.0005) MM DIMENSIONS: (IN) Bushing Selection Bushing Material Shaft Material Bushing Type "B" Shaft Dimension "A" Code 6.34 +0/-0.022 Brass Nickel Plated Brass 3/8 " 32-UNEF- 2A THD. A (0.2497 +0/-0.0009) 6.00 +0/-0.022 Brass Nickel Plated Brass M9 X 0.75-8g B (0.2362 +0/-0.0009) 6.34 +0/-0.007 Bronze Stainless Steel 3/8 " 32-UNEF- 2A THD. C (0.2497 +0/-0.0003) 6.00 +0/-0.007 Bronze Stainless Steel M9 X 0.75-8g D (0.2362 +0/-0.0003) 6.34 +0/-0.007 Bronze Stainless Steel 3/8 " 32-UNEF- 2A THD. G (0.2497 +0/-0.0003) 6.00 +0/-0.007 Bronze Stainless Steel M9 X 0.75-8g H (0.2362 +0/-0.0003) 6.86 0.25 (.270 .010) R 16.256 (.640) MAX. 12.7 0.254 (.500 .010) 1.524 +.000/-0.127 (.060 +.000/-.005) DIA. 1.016 (.040) OPTIONAL ANTI-ROTATIONAL PIN CCW 3 1 2 CCW 22.479 0.812 DIA. (.885 .032) 2 CW WIPER 3 1 DIA. 12.649 0.254 (.498 .010) MOUNTING FACE CW CLOCKWISE Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3549 - 10-Turn Precision Potentiometer Product Dimensions Single Gang, Servo Mount Single Gang, Servo Mount, Dual Ball Bearing 23.86 0.381 (.939 .015) 19.46 0.381 (.766 .015) 2 1 28.778 0.787 (1.133 .031) MOUNTING SURFACE 23.86 0.381 (.939 .015) 19.46 0.381 (.766 .015) 11.13 0.381 (.438 .015) 15.8725 + .0000/-.0127 DIA. (.6249 +.0000/-.0005) 3 MOUNTING SURFACE 11.13 0.381 (.438 .015) 15.8725 + .0000/-.0127 DIA. (.6249 +.0000/-.0005) 17.526 DIA. (.690) DIA. 3.1699 + .0000/-.0076 (.1248 + .0000/-.0003) 2 1 3 17.526 DIA. (.690) DIA. 3.1699 + .0000/-.0076 (.1248 + .0000/-.0003) 9.779 0.381 (.385 .015) 1.575 (.062) 1.575 (.062) 1.575 (.062) 1.575 (.062) 1.575 (.062) 1.575 (.062) 9.525 0.787 (.375 .031) 25.222 0.787 (.993 .031) 30 5 6.858 0.254 (.270 .010) R 16.256 (.640) MAX. 12.7 0.254 (.500 .010) 9.525 0.787 (.375 .031) 26.111 0.787 (1.028 .031) 30 5 6.858 0.254 (.270 .010) R 16.256 (.640) MAX. 12.7 0.254 (.500 .010) 22.225 0.381 (.875 .015) DIA. 2 CCW WIPER 3 1 22.225 0.381 (.875 .015) DIA. CW CLOCKWISE TOLERANCES: EXCEPT WHERE NOTED .50 .127 .0127 DECIMALS: .XX (.02) .XXX (.005) .XXXX (.0005) MM DIMENSIONS: (IN) 2 CCW WIPER 3 1 CLOCKWISE Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CW 3549 - 10-Turn Precision Potentiometer Product Dimensions Panel Thickness Dimensions (For Bushing Mount Only) Dual Gang, Servo Mount 2.46 - 3.81 (.097 - .150) 45.67 0.78 (1.798 .031) 44.65 0.78 (1.758 .031) 40.21 0.78 (1.583 .031) 31.88 0.78 (1.255 .031) 24.206 0.381 (.953 .015) 19.76 0.381 (.778 .015) 2 1 3 2 1 PANEL MOUNTING SURFACE HEX NUT 11.43 0.381 (.450 .015) 15.8725 + .0000/-.0127 DIA. (.6249 +.0000/-.0005) 3 17.526 DIA. (.690) DIA. 3.1699 + .0000/-.0076 (.1248 + .0000/-.0003) LOCKWASHER POT 10.44 .07 DIA. (.411 .003) 1.575 (.062) 1.575 (.062) 1.575 (.062) R 9.525 0.787 (.375 .031) ADDITIONAL HOLE FOR ANTI-ROTATION PIN 1.60 +.08/-.03 DIA. (.063 +.003/-.001) 30 5 6.858 0.254 (.270 .010) R 16.256 (.640) MAX. 12.7 0.254 (.500 .010) 7.42 (.292) Anti-rotation pin hole is shown at six o'clock position for reference only. The actual location is determined by the customer's application. Refer to the front view of the potentiometer to see the location of the optional A/R pin. Panel thickness and hole diameters are recommended for best fit. However, customers may adjust the dimensions to suit their specific application. 22.225 0.381 (.875 .015) DIA. CCW 3 1 2 CCW DIMENSIONS: 2 TOLERANCES: 0.127 (.005) CW WIPER 3 1 MM (INCHES) CW CLOCKWISE Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 3549 - 10-Turn Precision Potentiometer How To Order 3 5 4 9 S - 2 A A - 1 0 3 MODEL DESIGNATOR Code Description 3549 10-Turn / 1 0 3 A INDEPENDENT LINEARITY Code Description A 0.20 % B 0.10 % ELEMENT TYPE Code Description H Hybritron(R) S Wirewound RESISTANCE** Code Element Type Resolution (%) 102 (1K ohms) -- Hybritron(R) 202 (2K ohms) -- Hybritron(R) 502 (5K ohms) -- Hybritron(R) 103 (10K ohms) Hybritron(R) -- 203 (20K ohms) Hybritron(R) -- 503 (50K ohms) Hybritron(R) -- 104 (100K ohms) Hybritron(R) -- 101 (100 ohms) Wirewound 0.055 201 (200 ohms) Wirewound 0.042 501 (500 ohms) Wirewound 0.031 102 (1K ohms) 0.027 Wirewound 202 (2K ohms) 0.021 Wirewound 502 (5K ohms) 0.016 Wirewound 103 (10K ohms) Wirewound 0.019 203 (20K ohms) Wirewound 0.014 503 (50K ohms) Wirewound 0.011 104 (100K ohms) Wirewound 0.008 NO. OF SECTIONS Code Description 1 Single 2 Dual ANTI-ROTATION LUG Code Description A None B 180 * Anti-rotation lug is not available for servo mount versions. ** For Single gang, use only first three digits. For Dual gang, use six digits separated by a "/". BUSHING MOUNT Code A B C D G H Shaft FMS 13/16 " 20.6 mm 13/16 " 20.6 mm 13/16 " 20.6 mm Shaft Dia. 1/4 " 6 mm 1/4 " 6 mm 1/4 " 6 mm Code E F Shaft FMS 3/8 " 3/8 " Shaft Dia. 1/8 " 1/8 " Shaft Material Nickel Plated Brass Nickel Plated Brass Stainless Steel Stainless Steel Stainless Steel Stainless Steel Bushing Dia. 3/8 " 9 mm 3/8 " 9 mm 3/8 " 9 mm Bushing Material Brass Brass Bronze Bronze Bronze Bronze Slip Clutch N/A N/A N/A N/A Yes*** Yes*** SERVO MOUNT Shaft Material Stainless Steel Stainless Steel Ball Bearings N/A Front & Rear**** *** Not available in dual gang version. **** Available in Hybritron(R) version only and limited to single section. REV. 10/14 "Hybritron" is a registered trademark of Bourns, Inc. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: 3549H-1AA-102A 3549H-1AA-103A 3549H-1AC-102B 3549H-1AC-103B 3549H-1AC-202B 3549H-1AC-502B 3549S-1AA-102A 3549S-1AA-102B 3549S-1AA-103A 3549S-1AA-103B 3549S-1AA-203A 3549S-1AA-203B 3549S1AA-502A 3549H-1BA-102A 3549H-1AE-102B 3549H-1AE-103B 3549H-1AE-502B 3549H-2AA-102/102A 3549H2AC-102/102B 3549H-2AC-103/103B 3549H-2AC-104/104B 3549S-1AE-102A 3549S-1AE-103A 3549S-2AA101/101A 3549S-2AA-104/104A 3549S-2AA-502/502A 3549H-1AE-202A 3549S-1BB-102B 3549H-1BD-103B 3549H-1BA-502B 3549H-1AA-502A 3549H-1AA-102B 3549H-1AA-103B 3549H-1AA-202B 3549H-1AA-203B 3549H-1AA-502B 3549H-1AE-103A 3549H-1AE-203A 3549H-1BC-102A 3549S-1AA-101A 3549S-1AA-104A 3549S-1AA-104B 3549S-1AA-201A 3549S-1AA-202A 3549S-1AA-202B 3549S-1AA-501A 3549S-1AA-502B 3549S1AA-503A 3549S-1AB-203A 3549S-1AC-102B 3549S-1AC-103B 3549S-1AC-503A 3549S-1AE-502A 3549S-2AB101/101A 3549H-1AF-103A 3549H-1AA-203A 3549S-1AD-103A 3549H-1AB-502B 3549S-2AC-103/103B 3549S2AA-103/103B 3549H-2AA-103/103A 3549S-1AB-202A 3549H-2AA-502/502A 3549H-1BA-103B 3549H-1AG-102A 3549H-1AA-202A 3549S-1AB-502A 3549S-1BA-502A 3549S-1AG-104A 3549S-1AC-502B 3549S-2AA-102/103A 3549H-1AA-104A 3549H-1AB-102A 3549S-1AG-103A 3549S-1AC-103A 3549H-1AA-503A 3549S-1BD-103A 3549S-1AC-202B 3549H-1BH-502B 3549S-2AA-103/103A 3549S-1AD-102A 3549S-2BA-101/101B 3549H-1BA103A 3549S-1BH-203B 3549S-1BC-103B 3549S-2AA-202/202A 3549H-1BA-102B 3549S-1BA-103A 3549S-1AB502B 3549H-1AG-502B 3549S-1BA-102B 3549S-1AB-102B 3549S-1AD-103B 3549H-1BB-103A 3549H-1AC-502A 3549H-1BG-102B 3549H-1AD-103B 3549S-1AB-103A 3549S-2AA-102/102A 3549S-1BC-101A