ALUMINUM ELECTROLYTIC CAPACITORS BW High Temperature Range, For +135C Use series BX Highly dependable reliability withstanding load life of 1000 to 3000 hours at +135C. Suited for automobile electronics where heavy duty services are indispensable. Compliant to the RoHS directive (2011/65/EU). High Temperature BW High Temperature BT Specifications Performance Characteristics Item Category Temperature Range -55 to +135C Rated Voltage Range 10 to 100V Rated Capacitance Range 1 to 4700F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 1 minute's application of rated voltage at 20C, leakage current is not more than 0.03CV or 4 (A), whichever is greater. Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 0.10 80 0.08 100 0.08 120Hz,20C For capacitance of more than 1000F, add 0.02 for every increase of 1000F. 120Hz 10 3 4 Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) Z- 40C / Z+20C 16 2 4 The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 3000 hours (1000 hours for D=8, 2000 hours for D=10) at 135C, the peak voltage shall not exceed the rated voltage. Endurance 25 2 4 35 2 4 50 2 4 63 2 4 80 2 4 100 2 4 Within 30% of the initial capacitance value 300% or less than the initial specified value Less than or equal to the initial specified value Capacitance change Dissipation Factor Leakage current After storing the capacitors under no load at 135C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. Shelf Life Printed with white color letter on blue sleeve. Marking Radial Lead Type Type numbering system (Example : 10V 220F) 1 Sleeve (polyolefin) Sleeve (polyolefin) 2 3 4 5 6 7 8 9 10 11 1 2 3 4 5 6 7 8 9 10 11 U BW 1 A 2 2 1 MP D U BW 1 A 2 2 1 MP D P0.5 P0.5 + MAX. D+DMAX. d d Pressure relief vent Pressure relief vent L + 2 MAX. L + 2 MAX. 15 MIN 15 MIN 4 MIN 4 MIN (mm) D D 8 8 0.8 10 10 0.8 12.5 12.5 1.0 (mm) 16 16 1.0 0.8 0.8 1.0 1.0 P 3.5 5.0 5.0 7.5 P 3.5 5.0 5.0 7.5 d 0.8 0.6 0.6 0.8 d 0.6for the 0.612.50.8 In case0.8 L > 25 dia. unit, lead dia. d = 0.8mm. In case L > 25 for the 12.5 dia. unit, lead dia. d = 0.8mm. Configuration Configuration Pb-free leadwire D Pb-free Polyolefin sleeve Pb-free leadwire D Pb-free Polyolefin sleeve 8 * 10 PD 8 * 10 PD 12.5 * 16 HD 12.5 * 16 HD Configuration Configuration Capacitance tolerance (20%) Capacitance tolerance (20%) Rated capacitance (220F) Rated capacitance (220F) Rated voltage (10V) Rated voltage (10V) Series name Series name Type Type * Please refer to page 20 about the end seal configuration. Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS BW series Dimensions 10 (1A) V (Code) Case size D x L (mm) Item Cap.. (F) Co 100 220 330 470 1000 2200 3300 4700 de 101 221 331 471 102 222 332 472 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 16 x 25 16 x 31.5 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 25 (1E) Rated Impedance ripple () MAX. (mArms) 0.32 0.15 0.10 0.075 0.042 0.024 0.020 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 340 620 680 945 1490 2300 2710 Case size D x L (mm) 8 x 11.5 10 x 12.5 10 x 16 10 x 20 12.5 x 25 16 x 31.5 63 (1J) Impedance () MAX. Rated ripple (mArms) 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 8 x 11.5 10 x 12.5 10 x 20 12.5 x 20 12.5 x 25 16 x 31.5 2.00 1.80 1.50 1.15 0.75 0.50 0.45 0.35 0.18 0.098 0.070 0.055 0.031 35 50 60 85 180 250 300 440 555 930 1330 1650 2430 de 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 340 620 680 1100 1750 2300 2710 Case size D x L (mm) Item Cap.. (F) 0.26 0.15 0.10 0.057 0.033 0.024 0.020 Case size D x L (mm) 50 (1H) V(Code) Co 16 (1C) Rated Impedance ripple () MAX. (mArms) Case size D x L (mm) Impedance () MAX. 8 x 11.5 8 x 11.5 10 x 12.5 10 x 16 12.5 x 20 12.5 x 25 12.5 x 31.5 16 x 31.5 2.00 1.50 0.59 0.41 0.16 0.12 0.097 0.055 35 (1V) Rated Impedance ripple () MAX. (mArms) 0.13 0.10 0.075 0.057 0.033 0.020 500 680 945 1100 1750 2710 Case size D x L (mm) Impedance () MAX. Rated ripple (mArms) 10 x 12.5 10 x 16 10 x 20 12.5 x 20 16 x 25 0.15 0.094 0.075 0.058 0.031 620 790 950 1330 2010 80 (1K) Rated ripple (mArms) 130 150 530 690 1050 1290 1460 1900 Case size D x L (mm) 8 x 11.5 10 x 12.5 10 x 12.5 10 x 20 12.5 x 25 12.5 x 31.5 16 x 25 Impedance () MAX. 1.50 0.80 0.80 0.39 0.18 0.16 0.11 100 (2A) Rated ripple (mArms) 150 480 480 790 1240 1390 1500 Case size D x L (mm) Impedance () MAX. Rated ripple (mArms) 8 x 11.5 8 x 11.5 10 x 12.5 10 x 12.5 10 x 16 12.5 x 20 16 x 25 16 x 31.5 2.00 1.50 0.80 0.80 0.55 0.25 0.11 0.079 130 150 480 480 630 990 1500 1790 Rated ripple current (mArms) at 135C 100kHz Impedance () MAX. at 20C 100kHz Frequency coefficient of rated ripple current CV Frequency 1000 > CV 1000 CV 120Hz 300Hz 1kHz 10kHz or more 0.50 0.64 0.83 1.00 0.67 0.79 0.91 1.00 CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UBW1H331MHD UBW2A101MHD UBW2A331MHD UBW1C221MPD1TD UBW2A330MPD1TD UBW1C331MPD1TD UBW1H220MPD1TD UBW1J220MPD1TD UBW2A4R7MPD1TD UBW1V101MPD1TD UBW2A221MHD1TN UBW1E471MPD1TD UBW1A332MHD1TN UBW1H010MPD1TD UBW1C101MPD1TD UBW1K471MHD1TN UBW1E101MPD1TD UBW1K221MHD1TO UBW1H101MPD1TD UBW1V331MPD1TD UBW1J330MPD1TD UBW2A470MPD1TD UBW1H470MPD1TD UBW1K101MPD1TD UBW1A102MPD1TD UBW1E331MPD1TD UBW1H221MPD1TD UBW1K220MPD1TD UBW1H471MHD1TO UBW1J470MPD1TD UBW1J101MPD1TD UBW1H330MPD1TD UBW1H2R2MPD1TD UBW1A221MPD1TD UBW1H100MPD1TD UBW1V102MHD1TN UBW1E221MPD1TD UBW1K330MPD1TD UBW1V221MPD1TD