3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M PCB
.100" × .100" Two Row 78XX Series
• Single connector termination reduces overall connector cost
• 7.3 mm terminated height for applications requiring
low-profile off the board
• Solder bumps facilitate board cleaning
• Fits standard .100” x .100” header layout
• Uses less board area than 4-row design
• RoHS Compliant. See the Regulatory Information Appendix
(RIA) in the “RoHS compliance” section of
www.3Mconnector.com for compliance information (RIA
E1 & C1 apply)
Date Modied: July 14, 2011 TS-2104-B
Sheet 1 of 2
Physical
Insulation:
Material: Glass Filled Polyester
Flammability: UL 94V-0
Color: Gray
Contact
Material: Beryllium Copper
Plating
Underplating: 100 μ" [2.54 mm] Nickel
U Slot and Solder Tails: Gold Flash
Wire Accommodation 26 AWG Stranded, 28 AWG Solid or Stranded, 30 AWG Solid
Electrical
Current Rating: 1.0 A
Insulation Resistance: > 1,000 MΩ min. at 500VDC
Withstanding Voltage: 1,000 V
AC for 1 minute
Environmental
Temperature Rating: -55°C to +105°C
Process Rating: Wave solder only
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnector.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M PCB
.100" × .100" Two Row 78XX Series
TS-2104-B
Sheet 2 of 2
Ordering Information
78XX - 000XPR
Contact
Quantity A B C
10 17.4 17.8 10.2
14 22.5 22.9 15.2
16 25 25.4 17.8
20 30.1 30.5 22.9
26 37.7 38.1 30.5
30 42.8 43.2 35.6
34 47.9 48.3 40.6
40 55.5 55.9 48.3
50 68.2 68.6 61
60 80.9 81.3 73.7
64 86 86.4 78.7
C
Solder Tail Length:
0 = 2.8 mm
6 = 3.8 mm
Contact Quantity
See Table
Inch
[mm]
Tolerance Unless Noted
.0 .00
Inch ±.3 ±.13
Assembly Equipment: 3640 press (or equivalent), 3443-71 Locator Plate, 3442-9 Platen.
Transfer Adhesive
Position 1 Indicator
Solder Bump
Assembled Dimensions
Recommended Board Layout
See Ordering
Information
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2010. All rights reserved.
RIA-2217B-E
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnector.com 3M is a trademark of 3M Company.