Tip Extraction
Weller FE soldering irons have an integral smoke tube
mounted in the handle of the iron which when soldering
is positioned directly above the joint to collect any fumes
generated. Fume extraction irons can be connected to
Weller Zero-Smog systems WFE, WFEP bench mounted
units driving upto 2 irons or WFE 20 mobile unit driving
upto 20 irons.
Fume extraction attachments can be retro fitted to non
fume extraction Weller soldering irons.
Volume Extraction
For applications where Volume extraction is more suitab-
le, e.g. solder baths, hot air soldering, micro solders and
gluing work, Weller offers the mobile systems WFE 2S
and WFE 4S. The units purify the air at up to 8 workpla-
ces. A wide range of accessories is available for each
mobile system.
Weller®Zero-Smog
Filter Systems
The Weller Zero-Smog Systems put an end to air pollution caused by soldering,
adhesives and laser work. In all of these applications fumes or fine particles
are released into the work place atmosphere which are hazardous to staff
exposed to them.
The Weller Zero-Smog Systems’ combination of Pumps, electronic controls and
filters removes this hazard.
2
1.1.
2.+3.
Zero-Smog Filter System
Weller Zero-Smog Systems have a three stage filter system for
removing fine particles, fumes and gases produced in assembly operations.
Filters to meet varying work place requirements are available.
The main areas where filtration is required are • Solder /flux fumes
•Adhesive fumes
•Pollutants resulting from laser applications
Fine dust filter as per DIN 24185 / EN 779
HEPA filter DIN 24184, 24183 / EN 779 HEPA (High Efficiency Particulate Air) Filter
3
Filter process
1. Fine dust filter
For standard applications with little flux up to pollution
gases with high solids content. Weller offers the filter
classes F5, F7 and F9.
2. HEPA filter
Filters particles up to 0.3 µm. Weller offers HEPA
(High Efficiency Particulate Air)
filters of class H13, medium filtration efficiency 99.95 %.
3. Wide band gas filter
For cleaning harmful fumes and vapours. The Weller wide
band filter consists of 50 % active carbon and 50 % Pura-
tex. Harmful gases with a high molecular weight are clea-
ned by the active carbon. Puratex is suitable for absor-
bing gases of lower molecular weight. Because of its
composition, Puratex is able to convert a large number of
chemical pollutants by means of molecular modification
into non-polluting gases.
4. Gas filter (option)
The gas filter is used for extracting adhesive fumes and
solvents. Experience has shown that filtering suspended
particles is not so vital in this respect. The gas filter is fil-
led with 50 % active carbon and 50 % Puratex. The HEPA
H 13 is omitted.
WFE / WFE P
2.+3.
1.
WFE 2S / WFE 4SWFE 20D
Filter class medium filtration efficiency medium filtration efficiency Application
(dust) (aerosols)
Am % Em %
F5 > 97 40 - 60 for standard applications
F7 > 98 80 - 90 for applications with high
flux content
F9 > 99 > 95 with pollution gases with high
solids content e.g. soldering work
with enamel-covered wire or laser
tasks
Filter class Filtration efficiency Application
%
H13 > 99.95 Filter for ultra-clean rooms
1000-100
2.+3. or 4.
Tip Extraction
Characteristics
With this option using a FE soldering iron fumes are extracted directly at the soldering tip.
See page 8 for the range of Weller FE irons and attachments.
General properties
•High vacuum, upto 12,000 Pa
•Low volume
•Maximum bridging distance 200 m (WFE 20D requires Weller pipe system 50)
Applications
•Hand soldering
•Small solder baths
Special features
•Stop + Go supports to switch the extraction system on when the FE iron is removed from
the support and off after a short delay when the iron is replaced (WFE & WFE P only)
•Variable electronically controlled pump speed, adjustable at the unit or by remote control
via RS 232 and PC (WFE 20D)
•Filter condition warning, by LED at the unit or remote via RS 232 and PC (WFE 20D)
Units
Number of work places
System structure
Weller®Zero-Smog
Extraction Systems for all tasks
4
20
central + stand alone
2
central
WFE 20D WFE WFE P
5
Weller extraction systems are specifically designed for
continuous operation in industry. The high quality of
manufacture, care taken in the design stage and
component choice have given Weller machines a world
wide reputation for reliability and longevity.
Volume extraction
Characteristics
For applications where extraction over a wide area is required
General properties
•Low vacuum upto 2,800 Pa
•High volume
•Max bridging distance 30 m ( WFE 4S using Weller pipe system 75)
Areas of application
•Hot air workplaces • Clean room applications
•Soldering machines, robots, solder baths • microscope workplaces
•Laser processing
•Adhesive fumes
Special features
•automatic speed control depending on the number of connected workplaces
•the units can be remotely controlled by means of a remote control system available as
an accessory or by a PC/PLC connection
•filter condition monitoring at the unit or by remote control (accessories)
Units
Number of work places
System structure
4
central
8
central + stand alone
WFE 2S WFE 4S
Top
Oben
Top
Oben
6
Tip Extraction
Extraction Units
WFE – Small, portable, quiet, compressed air driven,
for stand alone application.
The Weller WFE is a small, portable unit designed for sol-
dering fume extraction with up to two FE soldering irons.
The WFE requires clean and oil-free compressed air. The
vacuum is generated by a maintenance-free compressed
air converter. The contaminated air is purified by a pre-
filter and main filter system.
The pre filter consists of a fine dust filter F7.
The compact main filter cartridge consists of a wide band
gas filter (50% active carbon, 50% Puratex) and a HEPA
filter of class H13. A compressed air cleaning filter remo-
ves additional odours caused by the compressed air. This
highly efficient filter system makes the WFE a genuine air
recovery system. The filter-lift system allows fast and con-
venient replacement of the filter cartridge. The FE solde-
ring irons are connected directly to the unit - additional
leads are not required.
WFE P – small, portable, quiet, electrically driven,
for central application
The Weller WFE P is soldering fume extraction unit runs
with line voltage for one or two FE soldering irons.
In contrast to the WFE, an electric, long-life and optima lly
soundproofed vacuum pump guarantees the required
vacuum, this making the WFE P independent of compres-
sed air. The vacuum pump has two power stages, which
can be set by means of rocker switches according to the
number of connected FE soldering irons. This saves energy.
The motor is maintenance-free and has a thermal over
load to protect the unit.
The WFE P has a three stage filter system comprising a F7
grade fine dust filter, and main filter consisting of a wide
band gas filter (50% active carbon and 50% puratex) and
a HEPA class 13 fine particle filter.
The Filter lift system allows fast and convenient main fil-
ter replacement.
FE irons are connected directly to unit additional leads
are not required.
Technical data WFE:
Height 200 mm
Diameter 140 mm
Weight 2,7 kg
Operating pressure 3,5 - 6 bar
Air consumption 30 l/min
Sound level 39 db(A) at
1 m distance
Max. vacuum max. 20.000 Pa
Max. capacity 2 FE-soldering irons
Order No.: 005 36 402 99
Spare filter for WFE:
•Compressed air- 005 87 357 57
cleaning filter
•Compact filter 005 36 410 99
consists of:
-HEPA filter (H13)
-Wide band gas filter
(50 % active carbon, 50 % Puratex)
•Fine dust filter (F7) 005 36 421 99
(3 pieces)
Technical data WFE P:
Height 295 mm
Diameter 140 mm
Weight 4 kg
Operating voltage 230 V / 50 Hz
Power input 50 W
Sound level 45 db(A) at
1 m distance
Max. vacuum 30,000 Pa
Max. capacity 2 FE soldering irons
Order No.: 005 36 386 99
(UK: 005 36 383 99)
Spare filter for WFE P:
•Compact filter 005 36 410 99
consists of:
-HEPA filter (H 13)
- Wide band gas filter
(50 % active carbon, 50 % Puratex)
•Fine dust filter (F7) 005 36 421 99
(3 pieces)
Accessories for WFE and WFE P
For FE soldering irons and Stop + Go supports,
see pages 8/9. Installation option see page 10.
WFE WFE P
New:
2 Power stages for
higher extraction
performance with
2 FE soldering irons.
7
The WFE20D is designed for tip extraction applications.
Upto 5 Weller FE soldering irons can be connected direct-
ly; indirectly, via pipe system 50 available as an accessory:
up to 20 FE soldering irons.
The powerful maintenance-free turbine generates a vacu-
um of 12.000 Pa and is electronically controlled. The ope-
rating hours and the level of filter contamination are also
recorded electronically.
The filter system has three stages. It comprises a fine dust
filter F5 and a compact filter, consisting of a HEPA filter
H13 and a wide band gas
filter (50 % active carbon, 50 % Puratex). The filter
system achieves a filtration rate of 99.95 % as per EN
1822 with a particle size of 0.12 µm.
Technical data WFE 20D:
Dimensions (LxWxH): 450 mm x 450 mm
x 695 mm
Weight: 45 kg
Operating voltage: 230 V
Power input: 630 VA
Sound level: 51 dB(A)
Max. vacuum: 12,000 Pa
Max. delivery rate: 100 m3/h
Max. capacity: 20 FE soldering
iron
Order No.: 005 36 476 99
(UK: 005 36 473 99)
Spare filters WFE 20D:•
•Fine dust filter(F5) 005 87 358 37
(F7) 005 87 358 36
•Compact filter 005 87 358 38
Consists of:
-HEPA filter (H 13)
- Wide band gas filter
(50% active carbon,
50 % Puratex)
Accessories WFE 20D:
For FE soldering irons and Stop + Go supports, see pages 8/9.
For other accessories, see page 10/11.
For pipe system 50, see page 18.
WFE 20D
Further features:
•Two selectable operating modes:
-Mode 0: vacuum regulated to 12,000 Pa
-Mode 1: extraction performance can be set individual-
ly between 20 % – 100 % with the buttons
•Electronic filter check (LED) through differential pressu-
re measurement. If the specified degree of contamina-
tion is exceeded, the unit switches off.
•Electronic filter operation status display. For better
management of the filter change intervals, the filter
operating hours can be pre-specified. The necessary
filter change is indicated in good time, thus optimising
filter procurement and replacement.
•Interface RS 232 for remote monitoring or
remote control.
•With the remote control, available as an accessory,
the following functions can be controlled:
-Switching the unit on/off
-Speed setting (only in mode 1)
-Filter status display
WFE 20D – mobile, powerful, electronically controlled, for central or stand alone application
New:
Electronically controlled
turbine.
Interface RS 232 for
remote control.
Model / Description Support Order No.
FE 50 Soldering pencil 50 W AK 20, KH 20* 005 25 153 99
FE 50 Soldering iron set with safety rest KH 20 005 33 150 99
FE 50M Soldering pencil with AK 20, KH 20* 005 32 152 99
Magnastat control system 50 W
FE 75 Soldering iron 80 W AK 20, KH 20* 005 29 166 99
FE 75 Soldering iron set with safety rest KH 20 005 33 151 99
WSP 80 FE Soldering pencil 80 W WPH 80 005 29 162 99
FE 80 Soldering iron 80 W AK 20, KH 20* 005 26 162 99
*Fume extraction funnels specific to FE irons are
included in the scope of supply of the soldering irons
for use with KH20 and KH 23 bench supports.
8
Tip Extraction
Accessories
FE Soldering Irons
Weller FE soldering irons are specifically designed for tip
extraction applications. The smoke tube is integral with
the handle and is normally placed over the joint when
soldering but can be retracted when access to the joint is
a problem and can be removed for cleaning. The irons
are temperature controlled, ergonomic and allow precise
handling. The electronically controlled irons can be driven
from any PU /PUD series power unit compatible with the
rating of the iron or any rework station. FE 50M irons can
only be driven from the P51 power unit. The range of
iron power ratings and the extensive range of solder tips
mean that there is an iron to suit all applications.
The FE irons are supplied with a 5 mm-dia. burn proof
hose 2.5 m long, all handles leads and hoses are ESD safe.
FE attachments
A range of FE attachments are available to fit to Weller
soldering and desoldering irons to convert standard pro-
ducts to fume extraction versions. The attachments are supplied with all necessary fittings and hoses.
The performance of the retrofitted tools is not affected.
Extraction hose (spare)
Heat-resistant silicone hose, ø5 mm for all FE soldering
irons (sold by metre) )
Order No.: 005 25 410 00
Locking clip
The locking clip is used to disconnect FE soldering irons
that are not required so that extraction power is not lost
unnecessarily. The clip can be operated quickly and con-
veniently.
Order No.: 005 36 352 99
Model / Description Required Support Order No.
For WSP 80 Soldering pencil WPH 80 005 29 167 99
For WMP Soldering pencil WPHM 005 29 177 99
For MLR 21, MLR 80 Soldering pencil WPH 80 005 29 127 99
For LR 21, LR 82,TCP S Soldering iron AK 20 005 25 125 99
For W 61,W 101,WSP 150 Soldering iron AK 1 005 25 125 99
For WSF 80D5/8 Soldering tin feed system AK S (included) 005 28 126 99
For DS 22, DS 80, DSX 80 Desoldering iron AK 20 005 13 125 99
9
The Weller Stop + Go supports are recommended acces-
sories for FE irons using the WFE or WFE P extraction
units. A fibre optic sensor switches the extraction unit on
when the FE iron is removed from the bench support
and when the FE iron is replaced in the bench support,
after a short delay to gather the fumes from any solder
on the tip it switches the unit off. This reduces running
costs.
Basic unit Stop + Go and a 2. support
support with fibre optic sensor with fibre optic sensor for
extending the Stop + Go basic
for: WFE (pneumatic) for: WFE P (electric) unit for 2 workplaces
KHP KHE KHE / P
005 15 086 99 005 15 076 99 005 15 080 99
KHP 80 KHE 80 KHE / P 80
005 15 084 99 005 15 083 99 005 15 141 99
FE soldering irons
FE 25
FE 50
FE 50M
FE 75
FE 80
WSP 80FE
AK 20
Support for FE 50, FE 50M,
FE 75, FE 80
005 15 030 99
KH 20*
Support for FE 50,
FE 50M, FE 75, FE 80
with FE attachment:
LR 21, LR 82,TCPS
005 15 020 99
*Fume extraction funnels specific to FE irons are included in the scope of
supply of the soldering irons for use with KH20 and KH 23 bench supports
KH 23*
Support for FE 25, MLR 21FE
005 15 023 99
WPH 80
Support for WSP 80FE
with FE attachment:
MLR 21,WSP 80
005 15 140 99
Supports and holders for FE soldering irons
Stop + Go supports for FE soldering irons together with WFE and WFE P
handling of the soldering iron. Especially recommended
for use with FE soldering irons.
Cord support
The cord support keeps the cord of the soldering iron
out of the direct working area. This allows an easy
Modello / Descrizione Codice articolo
Spring holder for AK 20 005 15 065 99
Spring holder for KH 23 005 15 066 99
soldering
iron
desoldering
iron
WDD 161V
WFE P
KH E
Stop + Go-support
central system stand alone system
with pipe system 50
extraction hose 5 mm
> 2,5 m bis max. 10 m
005 25 410 00
WFE 20D
extension hose 17
005 36 326 99
end seal 50
005 36 324 99
pipe 50
005 36 323 99
branch 50
005 36 321 99
end seal 50
005 36 324 99
pipe clamps 50
005 36 329 99
connecting nipple
for extraction hose
5 mm
005 36 338 99
pipe 50
005 36 323 99
T-piece 50
005 36 344 99
right angle
pipe 50
005 36 322 99
extraction
hose 40
005 36 414 00
adapter 17
005 36 343 99
connecting nipple
for hose 17
005 36 358 65
double socket 50
005 36 319 99
remote control
005 87 359 09
upto ca. 200 m
pipe 50
005 36 323 99
connecting
element 40-50
005 36 415 99
RS 232 cable (2 m)
005 31 191 99
WMD 3
WSD 81 connecting element 40-50
005 36 415 99
ESD
SAFE
Installation option for a central system with WFE P
Installation option for a central and stand alone system
with WFE 20D
10
Tip Extraction
Accessories
11
Description Order No.
Extraction hose 40,1 m, ø40 mm dia., complete.With 2 connecting elements for direct 005 36 316 99
connection of unit (WFE 20D) to pipe system 50, plastic, grey/black, flexible.
Extraction hose 40, ø40 mm dia. without connecting elements (sold by metre), 005 36 414 00
plastic, grey/black, flexible.
Connecting element 40-50 for connecting extraction hose 40 and pipe system 50, rubber, black. 005 36 415 99
17 mm dia. x 5 m long extension hose. 005 36 326 99
Used where the fume extraction iron is further than 2.5 m from the pipe system 50.
Note connection nipple for hose 17 and adapter 17 will be required, plastic, transparent.
Connection nipple for hose 17. 005 87 358 65
Amend direction to read direct.
Nut G 3/8" for connection nipple. 005 87 358 66
Adapter 17. 005 36 343 99
Adapts 17 mm dia hose to 5 mm dia hose on FE iron.
Connection nipple for 5 mm dia extraction hose to connect FE irons directly directly to pipe system 50. 005 36 338 99
The connection nipple is screwed at any point into the pipe system.
Amend cap closure to Dust cap. 005 87 350 50
Accessories for tip extraction
12
Volume Extraction
Extraction Units
WFE 2S WFE 2 Kit 1 WFE 2 Kit 2
Technical data WFE 2S:
Dimensions: 320 x 320 x 395
(L x W x H mm)
Weight: 19 kg
Operating voltage: 230 V
Power input: 275 VA
Sound level: 48 db(A) in
1 m distance
Max. vacuum: 2.700 PA
Max. extraction rate: 230 m3/h
Max. capacity: 2 work places
Standard connection: pipe system 50
Order No.: 005 36 266 99
(UK: 005 36 363 99)
WFE 2S with gas filter
as above but with adhesive fume filter
Order No.: 005 36 466 99
(UK: 005 36 463 99)
WFE 2 Kit 1 (for one work station)
consists of:
• 1 Solder fume extraction unit WFE 2S
• 1 Extraction arm with niozzle WFAN 50
flexible, 50 mm dia.
• 1 Bench mounting bracket WFTB 50
• 1 System seal WFFMP 50
• 1 Extraction hose 50 mm dia x 3 m long
(005 87 353 27)
Order No.: 005 36 436 99
(UK: 005 36 433 99)
WFE 2 Kit 1 with gas filter
as above but with adhesive fume filter
Order no.: 005 36 446 99
(UK: 005 36 443 99)
WFE 2 Kit 2 (for two work stations)
consists of:
•1 Solder fume extraction unit WFE 2S
•2 Extraction arm with nozzle WFAN 50,
flexible, 50 mm dia.
•2 Bench bench mounting brackets WFTB 50
•2 System seals WFFMP 50
•2 Extraction hoses 50, 3 m, ø50 mm
(005 87 353 27)
•1 Hose connector 50 (005 87 358 47)
Order No.: 005 36 456 99
(UK: 005 36 453 99)
WFE 2 Kit 2 with gas filter
as above but with adhesive fume filter
Order No.: 005 36 486 99
(UK: 005 36 483 99)
Spare filters for WFE 2S:
•Fine dust filter (F5) 005 87 358 84
(10 units) (F7)005 87 358 85
•Compact filter 005 87 358 83
consists of:
-HEPA filter (H13)
-Wide band gas filter
(50% active carbon,
50% Puratex)
•Option:
adhesive fume 005 87 358 95
filter
(50 % active carbon,
50 % Puratex
without HEPA filter H13)
WFE 2 K1 / K2 Stand alone extraction systems for
one or two work places.
The tried and tested Weller WFE 2S fume extraction
system is available in two user friendly, stand alone
systems. Designed for use in industrial, service and labo-
ratory applications these units are supplied complete
with flexible hoses, extraction arms, mounting brackets
and system seals, ready for installation in situe. Additio-
nal extraction arms with other extraction nozzles, extrac-
tion hoods and plates are available as optional extras.
All arms hoses and hoods are ESD safe.
WFE 2S – small, portable, quiet with electronic
speed control, for centralised applications.
The Weller WFE 2S extraction unit purifies the air at up
to two workplaces. It is designed as a central system
directly at the workplace. A powerful, maintenance-free
pump provides continuous fume extraction at a maxi-
mum air extraction rate of 230 m3/h. A built-in micropro-
cessor controls the adjustable pump speed. This avoids
unnecessary waste of suction power and saves energy.
The three-stage filter system is included in the scope of
delivery and can be replaced easily. It comprises a fine
dust filter (F5) and a combined HEPA filter and wide band
gas filter. The WFE 2S extraction unit is supplied with a
pipe connecting element 50 for the extraction hose 50.
The extensive range of accessories, such as extraction
nozzles and hoods, allows versatile and flexible use of
the system.
Features:
•Speed set by rotary potentiometer
•Red/Green LED to indicate filter condition
•RS 232 interface for remote control via PC
13
WFE 4S – mobile, powerful, electronically controlled suitable for central or
stand alone applications.
The WFE 4S is able to extract fumes from up to 8 workstations. The powerful mainten-
ance free variable speed pump is electronically controlled, and has a maximum capacity
of 615m3/h. It has 3 operating modes. Standard speed control selected by the user irre-
spective of the load on the system. Speed limiting control, when the pump speed is
automatically varied to match the load on the system and Economy control, when the
rate of fume absorption is maintained at a constant value.
The operating hours and the filter condition is also recorded. A three-stage filter com-
prising a fine dust filter (F5), HEPA filter and wide band gas filter is fitted to the stan-
dard unit but an adhesive fume absorption filter can be fitted. A flanged connecting
pipe suitable for connection to the Weller pipe system 75 is supplied. A wide range of
system 75 pipes, fittings and accessories are available to meet all installations and app-
lications.
Features:
•3 operating modes
•LED display for filter condition indication
•RS 232 interface for remote control via a PC
Pre Filter
To extend capacity of
WFE 2S and WFE 4S
units.
The pre filter is recommen-
ded for use with solder-
bath , automatic soldering
and laser applications. It
acts as a first stage in the
filter process thereby
increasing the lifetime of
the main filter units.
The pre filter can be fixed
directly to the top of the
WFE 4S or in series with it
or the WFE 2S as an inte-
gral element of the extrac-
tion system
WFE 4S
Technical data WFE 4S:
Dimensions: 450 x 450 x 650 mm
(L x W x H)
Weight: 21 kg
Operating voltage: 230 V/ Hz
Power input: 450 VA
Noise level: 51 db(A) at
1 m distance
Max. vacuum: 2,800 Pa
Max. extraction rate: 615 m3/h
Max. capacity: 8 work places
Standard connection: pipe system 75
Order No.: 005 36 256 99
(UK: 005 36 253 99)
WFE 4S with gas filter:
as above but with adhesive fume filter
Order No.: 005 36 496 99
(UK: 005 36 493 99)
Spare filter + special filter
for WFE 4S:
•Fine dust filter (F5) 005 87 358 37
(10 units) (F7) 005 87 358 36
•Compact filter 005 87 358 38
consists of:
-HEPA filter (H13)
-Wide band gas filter
(50% active carbon, 50% Puratex)
•Special filter (option):
adhesive fume filter 005 87 358 35
(50 % active carbon,
50 % Puratex
without HEPA filter H13)
Scope of supply:
•Filter box
•Fine dust filter (F7) 005 87 358 60
•2 x hose 005 87 358 32
connections 75
Order No.: 005 87 358 62
hose connection 50
005 87 358 47
hose connection 50 90°
005 87 358 48
extraction hose 50
005 87 353 27
hose clamp 50-70
005 87 358 79
bench mounting
bracket WFTB 50
005 36 379 99
WSB 150
WHA 3000P system seal
WFFMP 50
005 36 371 99
exhaust hood WFCC50
005 36 378 99
remote control
005 87 359 09
extraction arm WFAF 50
005 36 372 99
RS 232 cable (2 m)
005 31 191 99
WFE 2S
extraction hose 50
005 87 353 27
system seal
WFFMP 50
005 36 371 99
hose connection 75 90°
005 87 358 33
T piece 75
005 87 358 71 right angle pipe 75
005 87 358 69
T piece 75
005 87 358 71
extraction hose 50
005 87 353 27
system seal WFFMP 50
005 36 371 99
extraction plate WFDD 50
005 36 380 99
bench mounting
bracket WWTB 50
005 36 379 99
extraction
hose 50
005 87 353 27
system seal
WFFMP 50
005 36 371 99
end seal 75
005 87 358 55
extraction arm with
articulated joint
005 87 358 49
y y
with pipe system 75
hose connection 50
005 87 358 47
hose clamp 50-70
005 87 358 79
WFE 4S
upto ca. 30 m
pipe 75
005 87 358 70
extraction hose 75
005 87 353 13
adapter 50-75
005 87 358 56
adapter 50-75
005 87 358 56
extraction arm
WFAF 50
005 36 372 99
pipe clamps 75
005 87 358 64
extraction hose 50
005 87 353 27
remote control
005 87 359 09
RS 232 cable (2 m)
005 31 191 99
hose clamp 70-90
005 87 358 31
WFE 4S
WSB 150
Installation option for a central system with WFE 2S
Installation option for a central and stand alone system
with WFE 4S
14
Volume Extraction
Accessories
Description Order No.
Hose connection 50 for WFE 2S, e.g. for the direct connection of accessories 005 87 358 47
by means of extraction hose 50. Plastic, black.
Hose connection 75 for WFE 2S and WFE 4S,e.g.for connection to a stand alone system 005 87 358 32
by means of pipe 75 or extraction hose 75. Plastic, black.
Hose connection 50, 90° for WFE 2S, e.g. for the direct connection of accessories 005 87 358 48
by means of extraction hose 50. Plastic, black.
Hose connection 75, 90° for WFE 2S and WFE 4S, e.g. for connection to a stand alone system 005 87 358 33
by means of pipe 75 or extraction hose 75. Plastic, black.
Extraction hose 50, ø50 mm dia., sold by metre,for the direct connection of accessories . 005 87 353 27
Plastic, grey/black, flexible.
Extraction hose 75,ø75 mm dia., sold by metre, for connection to pipe system 75. 005 87 353 13
Plastic, grey/black, flexible.
Hose clamp 50 – 70 mm , 2 units, for securing extraction hose 50. 005 87 358 79
Hose clamp 70 – 90 mm , 2 units, for securing extraction hose 75. 005 87 358 31
Extraction arm 50 mm dia flexible extraction arm with articulated joint and airflow 005 87 358 49
control valve and bench clamp. ESD safe.
Extraction arm WFAN 50 005 36 374 99
50 mm dia flexible extraction arm with nozzle,
for use with WFFMP 50 system seal.
ESD safe. Max. length 800 mm.
15
Accessories for volume extraction
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
150 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
150 mm
100 mm
200 mm
300 mm
300 mm
200 mm
100 mm
100 mm
200 mm
300 mm
Volume Extraction
Accessories
Accessories for volume extraction
16
300 mm
200 mm
100 mm
0 mm
300 mm
200 mm
100 mm
0 mm
100 mm
200 mm
300 mm
150 mm
Description Order No.
Extraction arm WFAF 50 005 36 372 99
50 mm dia flexible extraction arm with
100 mm dia funnel, for use with WFFMP 50
system seal. ESD safe. Max. length 840 mm.
Extraction arm WFAS 50 005 36 373 99
50 mm dia flexible extraction arm with
210 x 20 mm flat nozzle, for use with
WFFMP 50 system seal. ESD safe.
Max. length 820 mm.
Exhaust hood WFCC 50 005 36 378 99
240 x 100 mm with flexible hose 1m long,
recommended for use with hot air soldering
operations, for use with WFFMP 50 system seal.
ESD safe.
Exhaust hood, 200 x 100 mm 005 87 358 45
recommended for use with hot air soldering operations uses extraction hose 50.
Description Order no.
Extraction plate WFDD 50 005 36 380 99
300 x 210 mm with 1m flexible hose, for adhesive and solvent fume extraction.
Uses system seal WFFMP 50. ESD safe.
Extraction bench 40 005 36 370 99
effective working area 600 x 350 mm, for adhesive and solvent fume extraction.
Hose connections from side or below. Check hose size info quotes extraction hose 40
and adapter 40-50 neither of which are listed.
System seal WFFMP 50 005 36 371 99
can be mounted directly to work bench or to mounting bracket.
It has a spring loaded cover to physically seal the system if an accessory is withdrawn.
Connects to hose 50. ESD safe.
Bench mounting bracket WFTB 50 for WFFMP 50. 005 36 379 99
Metal, black.
17
Accessories for volume extraction
18
Pipe systems for bridging long distances
Accessories
for Tip and Volume Extraction
Pipe system 50
Tip extraction systems demand a high value and constant
level of vacuum across the installation, the volume of air
extracted is of lesser importance. To achieve this it is
necessary to use a pipe system with relatively small dia-
meter. The Weller pipe system 50 allows extraction instal-
lations of up to 200 m when used with the WFE 20D unit
in a stand alone system
The pipe sections are designed to push together and
have internal sealing bushes.
In a central system, the FE irons are connected directly to
the fume extraction units
Pipe system 75
Volume extraction systems require a large volume of air
to be extracted and the level of vacuum is of lesser
importance. This means that a relatively large diameter
pipe system is required, if the pipe dia was too small the
flow resistance would increase and extraction capacity
reduced. The pipe system 75 allows installations up to
30 m. with the WFE 4S used in a stand alone system.
The pipe sections are designed to push together and
have internal sealing bushes.
Description Order No.
Pipe System 50 Pipe System 75
Pipe, 2 m, with seal at one end, plastic, black. 005 36 323 99 005 87 358 70
Right angle Pipe, 90°, 0.5 m, with seal at one end, plastic, black. 005 36 322 99 005 87 358 69
T-piece,2 x 90°, 1 m, with 3 seals, plastic, black. 005 36 344 99 005 87 358 71
Branch, 2 x 45°, 1 m, with 2 seals,plastic, black. 005 36 321 99 –
Double socket, plastic, black. 005 36 319 99 005 87 353 18
End seal, plastic, transparent. 005 36 324 99 005 87 358 55
Pipe clamps for pipes, e.g. for securing to wall, plastic, grey. 005 36 329 99 005 87 358 64
Adapter pipe system 75 to pipe system 50 with seals. 005 87 358 63
Adapter pipe system 75 to pipe system 50 without seals. 005 87 358 56
19
Accessories for all
Weller Zero-
Smog Systems
Description Order No.
Pipe 100, 2 m , ø100 mm dia., without seal, for use with 005 36 315 99
WFE 20D and WFE 4S, plastic, black.
Pipe 100, 90°, 05 m, ø100 mm dia., with seal, for use with 005 36 353 99
WFE 20D and WFE 4S, plastic, black.
Exhaust adapter of pipe 100 to WFE 20D. 005 87 359 20
Exhaust adapter of pipe 100 to WFE 4S. 005 87 358 40
Exhaust adapter of pipe 75 for WFE 2S. 005 87 354 13
Exhaust accessories for removing filtered air
Description Order No.
Using the Weller remote control, the following functions of the extraction units WFE 20D, 005 87 359 09
WFE 2S and WFE 4S can be controlled remotely:
•Switching unit on/off
•Speed setting (only WFE 2S / WFE 4S)
•Filter status display
Interface cable RS 232, 2 m for remote monitoring by PC (type 1:1). 005 31 191 99
Other lengths are available in specialist shops.
Remote control
WFE 2S
WFE WFE P WFE 20D
WFE 4S
Portable solder fume extracti-
on unit Compressed air-driven
for up to 2 FE soldering irons.
Consists of:
■
Extraction unit
■
Compressed air cleaning filter
■
Fine dust filter F7
■
Compact filter
(consists of HEPA filter
and wide band gas filter)
Order No. 005 36 402 99
Portable solder fume extracti-
on unit with built-in turbine
for up to 2 FE soldering irons.
Consists of:
■
Extraction unit
■
Fine dust filter F7
■
Compact filter
(consists of HEPA filter
and wide band gas filter)
Order No. 005 36 386 99
(UK: 005 36 383 99)
Portable solder fume extracti-
on unit with built-in turbine
for up to 4 workplaces.
Consists of:
■
Extraction unit
■
Fine dust filter F5
■
Compact filter
(consists of HEPA filter
and wide band gas filter)
■
Hose connection 50
Order No. 005 36 266 99
(UK: 005 36 263 99)
Mobile solder fume extraction
unit with built-in turbine for
up to 8 workplaces.
Consists of:
■
Extraction unit
■
Fine dust filter F5
■
Compact filter
(consists of HEPA filter
and wide band gas filter)
■
Hose connection 75
Order No. 005 36 256 99
(UK: 005 36 253 99)
Mobile solder fume extraction
unit with built-in turbine for up
to 20 FE soldering irons.
Consists of:
■
Extraction unit
■
Fine dust filter F5
■
Compact filter
(consists of HEP A filter
and wide band gas filter)
Order No. 005 36 476 99
(UK: 005 36 473 99)
GERMANY GREAT BRITAIN
Cooper T ools GmbH Cooper T ools Ltd.
Carl-Benz-Str. 2 Suite 15, Coniston House
74354 Besigheim Town Centre
Tel: (07143) 580-0 Washington, Tyne & Wear
Fax: (07143) 580-108 NE38 7RN
Tel: (0191) 419 7700
Fax: (0191) 417 9421
FRANCE ITALY SWITZERLAND
Cooper Tools S.A. Cooper Italia S.p.A. Erem S.A.
25 Rue Maurice Chevalier BP 46 Viale Europa 80 Rue de la Roselière 8
77832 Ozior-la-Ferrière Cedex 20090 Cusago (MI) 1400 Yverdon les Bains
Tel: (1) 60.18.55.40 Tel: (02) 9033101 Tel: (024) 426 12 06
Fax: (1) 64.40.33.05 Fax: (02) 90394231 Fax: (024) 425 09 77
Units for tip extraction
Units for volume extraction
© 2004, Cooper Industries, Inc.
Specifications subject to change without notice.
005 56 170 03 / 08.04 WAL 3.0
