PC BOARD CONNECTORS 720M SERIES (CRIMP TYPE CONNECTORS) FEATURES * The 720 series connectors (crimp type connectors) are designed for a wide range of uses. * 1-row and 2-row types are available to allow various types of mounting. * DIP sockets allow board-to-board connections (for 18pin type only). * Contact pitch of 2 x 2 mm (0.079 x 0.079 in.), mounting height of 3.8 mm (0.149 in.) for crimp type, and 6.6 mm (0.260 in.) for DIP type. A compact and low profile allows high density mounting. * Multiple crimp sockets can be aligned in contact with each other to connect with one header on a PC board. * Insulator material is UL approved (94V-0/94V-1). SPECIFICATIONS Item Specification Operating temperature range -55C to +85C Current rating DC 3 A Voltage rating AC 250 V Contact resistance 20 m max. (DC 6 V, 0.1 A) Insulation resistance 1000 M max. (500 V) Dielectric strength AC 500 V for 1 minute Applicable wire AWG #26 to #34 MATERIALS Item Insulating material Materials Plug Polyester (UL94V-0) Plug (SMT) PPS Housing PPO Conductor Plating Copper alloy Contact Gold Terminal Palladium Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 1 720M Series (Crimp Type Connectors) ORDERING CODE 1. Plug FCN-72 4 P 018-G / W M M series Main body S: 1-row type W: 2-row type R: 1-row type (SMT) Plating G: Gold T: Tin Number of contacts P: Plug Tail type 4: Straight 5: Right-angle 8: SMT 720 series Fujitsu connector 2. Housing FCN-72 3 J 018 / 2 M M series Main body 1: 1-row type 2: 2-row type Number of contacts J: Socket Tail type 3: Crimp 4: Straight (for 18-contact type only) 720 series Fujitsu connector Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 2 720M Series (Crimp Type Connectors) HOUSING (1-ROW TYPE) DIMENSIONS 2.0(0.079) A B 2.0(0.079) 3.2 (0.126) 6.5(0.256) Pin No. 1 Unit: mm (in.) PART NUMBERS AND DIMENSIONS Number of contacts 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Part number FCN-723J002/1M FCN-723J003/1M FCN-723J004/1M FCN-723J005/1M FCN-723J006/1M FCN-723J007/1M FCN-723J008/1M FCN-723J009/1M FCN-723J010/1M FCN-723J011/1M FCN-723J012/1M FCN-723J013/1M FCN-723J014/1M FCN-723J015/1M FCN-723J016/1M FCN-723J017/1M FCN-723J018/1M Dimensions: mm (in.) A B 4.0 (0.157) 2.0 (0.079) 6.0 (0.236) 4.0 (0.157) 8.0 (0.315) 6.0 (0.236) 10.0 (0.394) 8.0 (0.315) 12.0 (0.472) 10.0 (0.394) 14.0 (0.551) 12.0 (0.472) 16.0 (0.630) 14.0 (0.551) 18.0 (0.708) 16.0 (0.630) 20.0 (0.787) 18.0 (0.708) 22.0 (0.866) 20.0 (0.787) 24.0 (0.945) 22.0 (0.866) 26.0 (1.023) 24.0 (0.945) 28.0 (1.102) 26.0 (1.023) 30.0 (1.181) 28.0 (1.102) 32.0 (1.260) 30.0 (1.181) 34.0 (1.339) 32.0 (1.260) 36.0 (1.417) 34.0 (1.339) Note: For 'Lite PAGOS' add -HN to part number. Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 3 720M Series (Crimp Type Connectors) CRIMP CONTACT DIMENSIONS 1. Parts in bulk Tool: Hand crimping tool 5.5(0.216) 1.15(0.045) 1.15(0.045) 2.45(0.096) Applicable wire size (AWG#) #26 #28 #30 #32 #34 Applicable contact Gold-plated Tin-plated FCN-723J-G/AM FCN-723J-T/AM Unit: mm (in.) 2. Parts in strips Tool: Semiautomatic crimping tool 10.5(0.413) 5.5(0.216) 5.08(0.208) 1.15(0.045) 2.45(.096) Applicable wire size (AWG#) #26 #28 #30 #32 #34 Applicable contact Gold-plated Tin-plated FCN-723J-G/BM FCN-723J-T/BM Unit: mm (in.) Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 4 720M Series (Crimp Type Connectors) CRIMPING TOOLS NOTES ON USING CRIMPING TOOLS * Many crimping tools are available, but they are not compatible. Always use the crimping tools specified by Fujitsu. * When using crimping tools, be sure to adjust the crimp height according to the table below. Otherwise, wire may be loose or break off. Contact type Stripped length (mm (in.)) 1.2(0.047) to 1.6(0.063) Wire to be crimped Semiautomatic crimping tool Crimp height Hand crimping tool HAND CRIMPING TOOL Wire gauge (AWG#) Wire crossCrimp height sectional area (mm (in.)) (mm (in.)) 0.1 to 0.16 (0.0039 to 0.0063) 0.065 to 0.096 (0.0025 to 0.0038) 0.05 to 0.06 (0.0019 to 0.0024) 0.032 to 0.038 (0.0013 to 0.0015) 0.02 to 0.023 (0.0008 to 0.0009) #26 #28 #30 #32 #34 Insulator diameter (mm (in.)) 0.64 to 0.70 (0.025 to 0.027) 1.1 to 1.4 0.60 to 0.66 (0.043 to 0.055) (0.024 to 0.026) 0.62 to 0.68 (.0244 to .0268) 0.7 to 1.0 0.60 to 0.66 (0.024 to 0.026) (0.028 to 0.039) 0.58 to 0.64 (0.023 to 0.025) Contact type Hand crimping tool Gold-plated Tin-plated FCN-723J-G/AM FCN-723J-T/AM Stripped length (mm (in.)) FCN-723T-T021/H FCN-723T-T022/H 1.2 to 1.6 (.047 to .063) SEMIAUTOMATIC CRIMPING TOOL Wire gauge (AWG#) #26 #28 #30 #32 #34 Wire crossCrimp height sectional area (mm (in.)) (mm (in.)) 0.1 to 0.16 (0.0039 to 0.0063) 0.065 to 0.096 (0.0025 to 0.0038) 0.05 to 0.06 (0.0019 to 0.0024) 0.032 to 0.038 (0.0013 to 0.0015) 0.02 to 0.023 (0.0008 to 0.0009) Insulator diameter (mm (in.)) Semiautomatic crimping tool Press Applicator 0.64 to 0.70 (0.025 to 0.027) 0.8 to 1.4 FCN-A121 0.60 to 0.66 (0.031 to 0.055) (0.024 to 0.026) 0.62 to 0.68 FCN-M100 (.0244 to .0268) 0.5 to 1.3 0.60 to 0.66 FCN-A122 (0.024 to 0.026) (0.020 to 0.051) 0.58 to 0.64 (0.023 to 0.025) Contact type Gold-plated Tin-plated FCN-723J-G/BM FCN-723J-T/BM Stripped length (mm (in.)) 1.2 to 1.6 (.047 to .063) Note: FCN-M100 conventional 3-ton press is also available. Contact us. UNITS OF ORDERING PARTS IN STRIPS Part number Units of order FCN-723J-G/BM 10,000 FCN-723J-T/BM 10,000 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 5 720M Series (Crimp Type Connectors) POLARIZING KEY DIMENSIONS Part number: FCN-720A01 3(0.118) 1.2(0.047) 0.65(0.026) Note : Can be ordered in units of 10. Unit: mm (in.) SPECIFICATION OF POLARITY TO PREVENT INCORRECT INSERTION Plug Socket Polarization Pull out a specified pin. Plug a polarizing key into a specified position. Specification Specify a two-digit pin number with polarity at the end of the part number. Example: When specifying pin No. 4 FCN-725P018-G/WM#4 Specify a two-digit pin number with polarity at the end of the part number. Example: When specifying pin No. 4 FCN-723J018/2M#4 Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 Specifications subject to change Dimensions are in millimeters (inches) www.fcai.fujitsu.com 6