Part Number: 012K88-33130-29
Cross Section of Part Number: 012K88-33130-29
Flame-Retardant
Outer Jacket
Ripcord
Dielectric Strength
Members
Dielectric Strength
Members
Tight-Buffered
Fiber
Dielectric Strength
Members
Corning MIC® plenum cables are designed for use in
plenum, riser and general purpose environments for in-
trabuilding backbone and horizontal installations. These
multifiber cables use 900 μm TBII® buffered fibers to al-
low easy, consistent stripping and to facilitate termination.
The fibers are surrounded by dielectric strength members
and protected by a flame -retardant outer jacket.
The all -dielectric cable construction requires no ground-
ing or bonding. MIC plenum cables are ideal for routing
inside buildings, within plenum areas and riser shafts,
to the telecommunications rooms and workstations. The
MIC plenum cables meet the application requirements of
the National Electrical Code® (NEC®) Article 770 and are
OFNP and FT -6 listed.
This cable is available in 12 different jacket colors – blue,
orange, green, brown, slate, white, red, black, yellow,
violet, rose and aqua. The colored jacket allows for easy
visual identification of the cables. The standard jacket
color will be determined by the dominant fiber type in
the cable and will use the standard part numbers shown
here. Contact Customer Care at 1 -800 -743 -2675 to order
other color options.
Features and Benefits
900 µm TBII® Buffered Fibers
Easy, consistent stripping
All-dielectric construction
Requires no grounding or bonding
Flame-retardant jacket
Rugged and durable
Standards
Approval and Listings National Electrical Code®
(NEC®) OFNP, CSA FT-6,
ICEA S-83-596
Flame Resistance NFPA 262 (for plenum, riser
and general building appli-
cations)
MIC® Tight-Buffered Cable, Plenum
12 F, 62.5 µm multimode (OM1)
Product Specification 012K88-33130-29_NAFTA_AEN
Page 1 | Revision date 2014-04-10