6ES7792-0AA00-0XA0 - Siemens

Siem ens Aktiengesellschaft

SIMATIC S5

Edition 11/2001

S5EPROM for USB prommer

Reference Guide

A5E00137384

The reproduction, transmission or use of this document or its

contents is not permitted without express written authority.

Offenders will be liable for damages. All rights, including rights

created by patent grant or registration of a utility model or design,

are reserved.

Siemens AG

Bereich Automatisierungs- und Antriebstechnik

Geschaeftsgebiet Industrie-Automatisierungssysteme

Oestliche Rheinbrueckenstr. 50 D - 76181 Karlsruhe

W e have checked the contents of this document for agreement with

the hardware and software described. Since deviations cannot be

precluded entirely, we cannot guarantee full agreeement. However,

the data in this document are reviewed regularly and any necessary

corrections included in subsequent editions. Suggestions for

improvement are welcomed.

Technical data subject to change

Siem ens Aktiengesellschaft A5E00137384

Printed in the Federal Republic of Germany

Contents

1 General ...............................................................................................................................3

2 Installation..........................................................................................................................3

3 Run Environment / Requirements....................................................................................3

4 Restrictions........................................................................................................................3

5 Program Description.........................................................................................................4

5.1 File Name ............................................................................................................................5

5.2 Block....................................................................................................................................5

5.3 Programming Number.........................................................................................................6

5.4 Effect of Module Function Group.........................................................................................7

5.4.1 Loading from program file....................................................................................................7

5.4.2 Loading from binary file .......................................................................................................8

5.4.3 Read ....................................................................................................................................8

5.4.4 Erasing.................................................................................................................................8

5.4.5 Directory...............................................................................................................................8

5.4.6 Comparison .........................................................................................................................8

5.4.7 Parameters..........................................................................................................................8

5.5 Print List Box........................................................................................................................9

5.6 Close....................................................................................................................................9

6 Deinstallation ...................................................................................................................10

S5EPROM for USB prommer Reference Guide

S5EPROM - Reference Guide

A5E00137384-01 3

1 General

The program S5EPROM.EXE allows S5EPROM / EEPROM modules and S5 memory cards to be

programmed using the SIMATIC USB-PROMMER.

With this program, you can transfer, compare and read blocks from an S5 program file (*ST.S5D

file) onto SIMATIC S5 modules. Transferring data from a file onto a memory module is also

described as “load” with STEP 5.

The contents of binary files can be transferred onto a module. It is not possible to read binary

files.

2 Installation

On installing the STEP 5 package V7.2, the installation process is automatically run for the

program S5EPROM.

Program file S5EPROM.EXE is then copied into the current STEP 5 systems directory, e.g.

according to C:\STEP5\S5_SYS\S5EPROM.EXE.

A link to the program S5EPROM.EXE is created in your Windows start menu under Start ->

Simatic -> STEP 5. From here, you can easily call up the program S5EPROM.

3 Run Environment / Requirements

The program can run under Windows 95/98/Me or Windows 2000.

For all functions of the program S5EPROM, a SIMATIC USB-PROMMER is necessary,

connected via a USB interface. The SIMATIC USB-Prommer must be installed as a USB device

and connected via the DC 12V power supply cable.

The SIMATIC USB and installation software is not included in the STEP 5 scope of supply.

The SIMATIC USB-Prommer can be ordered as a product under MLFB no.

6ES7 792-0AA00-0XA0.

For the print function, it is assumed that a local printer or a network printer is reliably set up on

your computer's Windows operating system.

To create the STEP 5 program file with S5 blocks, an executable STEP 5 is required in versions

V6.x or V7.x.

4 Restrictions

When a German version of Windows is installed, the program S5EPROM logs on in German.

With all other Windows language versions, the S5EPROM logs on in English.

French, Spanish and Italian are not supported.

System functions that are called by S5EPROM such as 'Print' or 'File Selection' always appear in

the current Windows language, however.

Reference Guide S5EPROM for USB prommer

S5EPROM - Reference Guide

4A5E00137384-01

5 Program Description

The following functions are available:

• Loading S5 blocks into S5 EPROM/EEPROM modules or S5 memory cards (Load) .

• Loading the contents of binary files into EPROM/EEPROM modules (Load).

• Reading S5 blocks from EPROM/EEPROM modules or S5 memory cards and transferring

into an existing preset program file (Read).

• Erasing EEPROM modules or S5 memory cards (Erase).

• Comparing EPROM/EEPROM module contents or S5 memory cards with S5 program file

contents.

• Disp laying information on EPROM/EEPROM or S5 memory cards (parameters, directory).

Note

Commentary blocks, documentation blocks and display driver blocks cannot be shot onto the

module.

S5EPROM for USB prommer Reference Guide

S5EPROM - Reference Guide

A5E00137384-01 5

5.1 File Name

The path and file name for the data transfer must be entered in the input box "STEP 5 program

file / binary file".

You have two ways of making the entries:

• Entering the path and file name directly, e.g. C:\STEP5\S5_DATEN\S5PROGST.S5D

• Selecting the file by clicking the appropriate button with three dots (…).

Warning

The *.ST.S5D file indicated in the input box must always be present, even with the read

function.

If the data is to be transferred into a new *.ST.S5D file, this file must first be created using the

STEP 5 program. A file without program blocks can be created in STEP 5 by entering e.g. a

display driver block (block type BB) into a new *.ST.S5D file.

5.2 Block

Possible entries include:

Individual blo ck nam es e.g. PBn,FBn,... (up to 6 individual blocks can be selected)

All blocks of one type e.g.: PB (only one block type in each case can be selected).

All program blocks of the preset S5 program file B

You have two ways of entering the block:

• Entering the above block symbol directly

• Selecting the block by clicking the appropriate button with three dots (…).

Reference Guide S5EPROM for USB prommer

S5EPROM - Reference Guide

6A5E00137384-01

If you wish to line up several individual block names, you must add the block number to the

inserted blo ck ty pe.

Note

Display driver blocks and documentation blocks (block type BB, # and %) cannot be transferred

onto one module.

5.3 Programming Number

Here you have to enter the programming number. This number allows the required S5-

EPROM/EEPROM module or S5 memory card to be identified.

You have two ways of entering this number:

• Enter the number directly

• Click on the appropriate button with three dots (…) to select the number. The assignments

are listed in a list provided with STEP 5. Use the selection box to display this list, which you

can page through. Once you have positioned the cursor on a module in the list and confirmed

this with the acceptance key, the corresponding program number is inserted into the

programming number box.

S5EPROM for USB prommer Reference Guide

S5EPROM - Reference Guide

A5E00137384-01 7

Explanatory note on list with programming numbers:

• MLFB number is a module’s order number

• Programming number allows the programming device

to identify the EPROM/EEPROM module or S5 memory card. This number is permanently

assigned to the order number.

• Capacity is the storage capacity of the EPROM/EEPROM module.

Note

Programming number 500 is reserved for SIMATIC memory cards. The loading and testing

sequence is identical to the sequences described in this chapter.

Once you have entered the programming number and confirmed with the START button, an

information module is displayed.

Caution

If you enter an incorrect programming number, this may destroy EPROM/EEPROM modules.

If, for example, you inadvertently only enter 57 instead of 457 as programming number for the

module 6ES5 372-1AA61, the module is destroyed.

5.4 Effect of Module Function Gr oup

All the following functions in each case start with an output of the module information.

They are terminated with the message:

EPROM Check FREE From nnnnnnn

The FREE is thereby the physical end address of the last block in the EPROM/EEPRO M module

or S5 memory card.

5.4.1 Loading from program file

Transferring blocks into an EPROM/EEPROM module or S5 memory card. Entries are required

for ’STEP 5 program file name’, ’block’ and ’programming number’.

Note

It is not possible to divide up the program blocks of a *ST.S5D file into several modules. If

module storage capacity is not sufficient for the selected program blocks, programming is

aborted when the first module is full.

Reference Guide S5EPROM for USB prommer

S5EPROM - Reference Guide

8A5E00137384-01

5.4.2 Loading from binary file

Transferring binary data into an EPROM/EEPROM module. Entries are required for ’binary file

name’ and ’programming number’.

5.4.3 Read

Transfer from an EPROM/EEPROM module or an S5 memory card to the selected program file.

Entries are required for ’STEP 5 program file name’, ’block’ and ’pr ogra mm ing num ber’.

5.4.4 Erasing

The erasing process (EEPROMs and S5 memory cards only) is concluded with the message:

Module... End address nnnnnnnn

EPROMs cannot be erased with this program but only with a UV erasing unit.

5.4.5 Directory

Output of directory information via the module set in the EPROM interface. Entries are required

for ’STEP 5 program file name’ and ’programm ing num ber’. Where a block field is bla nk, all blo ck s

are displayed.

If a block or block head is found, the block list is output on the screen.

Depending on the setting, the output is terminated with the following message:

For one block or a group of blocks:

Block name Length: nnnn Module address: nnnnnnnn

BIB-Nr.: nnnnnnnn

5.4.6 Comparison

Comparison of the S5 blocks stored in the EPROM/EEPROM or S5 memory card with those in

the selected program file. Entries are required for ’STEP 5 program file name’ and ’programming

number’. Where a block field is blank, all blocks are compared.

The result of the comparison is output in the list box. Messages are output during the comparison.

The following messages are displayed if there is any discrepancy in the comparison:

Address The relative block address in the module

Ref. Setpoint (value) = memory contents filed under the relative block address in the program file.

Act. current value = memory contents filed under the relative block address in the

EPROM/EEPROM module.

5.4.7 Parameters

Output of EPROM/EEPROM parameters or S5 memory card on the screen and comparison with

parameter values of the module set in the EPROM interface. When values are equal, the result is

displayed. ’Programming number’ must be entered in order to execute the function.

S5EPROM for USB prommer Reference Guide

S5EPROM - Reference Guide

A5E00137384-01 9

5.5 Print List Box

To print, press the button with the same name in the S5EPROM window. The system window

’Print’ appears for the standard printer.

Here you can go on to specify the print request by selecting the pages to be printed or the number

of copies. Start printing with the ’OK’ button.

5.6 Close

Close the S5EPROM program by pressing the ’Cancel’ button in the STEP 5 EPROM

programming window.

Reference Guide S5EPROM for USB prommer

S5EPROM - Reference Guide

10 A5E00137384-01

6 Deinstallation

The program S5EPROM is removed from your computer by deinstalling the STEP 5 package.