CANNON
CGL Connectors
www.ittcannon.com2
Our connector portfolio remains the most extensive in the industry, offering a reliable and cost effec-
tive range of interconnect solutions with the brands of Cannon, VEAM and BIW Connector Systems.
Continuous investment in technology and research & development have enabled ITT to provide new,
innovative products and solutions to markets including:
ITT
Corporation
ITT is a diversified leading manufacturer of highly engineered critical
components and customized technology solutions for the energy, trans-
portation and industrial markets. Building on its heritage of innovation,
ITT partners with its customers to deliver enduring solutions to the key
industries that underpin our modern way of life. Founded in 1920, ITT
is headquartered in White Plains, N. Y., with employees in more than 35
countries and sales in a total of approximately 125 countries. The com-
pany generated 2012 revenues of $ 2.2 billion. For more information,
visit www.itt.com.
www.ittcannon.com 3
Our connector portfolio
remains the most extensive
in the industry, offering a reliable and
cost effective range of interconnect
solutions
Automotive
Oil & Gas
Commercial & Military Aerospace
Computer, Telecom &
Consumer Electronics
Transportation
lndustrial / lnstrumentation
Defense Vehicles
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
4
Introduction to CGL
Circular connectors featured by metal shells are usually only good for an
operating voltage of 50 Volts. Voltages in access to that are considered to
be potentially hazardous for any human body. ITT Cannon already in 1987
took appropriate measures to develop the essential design features to
respond to this fact.
There was an increasing need for connectors of such nature seen in
industrial applications like motors and drives and numerous other options
wherever goods or things have to be moved. Usually such applications are
featured by the utilization of mains power which often has to be connected.
Features and benefits
• The products in this catalogue are designed to be utilized with mains power which means 250 – 700 VRMS depending on the insulator
style and the contact arrangement.
• All the plugs and receptacles equipped with a rst to mate last to break grounding contact are electrically linked to the shell.
• There are various backshell or adapter options available like PG and metric gland adapters. As there are hundreds of PG and
metric gland versions on the market available we would like our valued customers to purchase these parts separately.
• The Universal Endbell is an ITT Cannon development which offers a shielding option and sealing up to IP69k.
• The 700 V products are coined by a UL certication.
Contact us for detail or your request for a customized solution.
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
5
How to use this catalogue .................................... 6
CGL 250 V– 500 V versions
Product overview ................................................. 7
Ordering reference .................................................9
Contact arrangements ..........................................10
Box mounting receptacle CGL02 ...........................12
Straight plug CGL06 .............................................13
90˚ plug CGL08 ....................................................14
Connectors with Universal Endbells ......................15
300 V special versions ...........................................16
Accessories ..........................................................18
Tooling ................................................................20
CGL 700 V special versions
Product overview .................................................21
Contact arrangements ..........................................22
Size 28 .................................................................23
Size 36 .................................................................24
Tooling ................................................................25
Product safety information ...................................26
Table of contents
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
6
Select your product using the “ordering reference”
Select your product using the “contact arrangement” on
page 22
Use the detail pages to better understand the available
options and choose the best solution for your needs
Use the detail pages to better understand the available
options and choose the best solution for your needs
Add accessories and tooling as required on the related
pages
Add contacts from the contact tables and tooling as
required on the related pages
Use the contact information on the back cover to contact
us for further questions or to get advise on where you can
purchase our products
Use the contact information on the back cover to contact
us for further questions or to get advise on where you can
purchase our products
1
1
2
2
3
3
4
4
How to use
This catalog is split in several sections that help you to
• get a general overview of all product lines (product overview)
• get all required detail information (dimensions, product details)
• get all required support products (accessories, tooling)
The fastest way to find your product of choice is to follow these steps
First section: CGL 250 V–500 V (see page 7–20)
Second section: CGL 700 V special versions (see page 21–25)
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
7
Product overview CGL 250 V–500 V
ELECTRICAL DATA
Contact rating at 20°C (68°F)
Contact size (AWG/metric) Rated Current (Amax.)
16S /15S 22
16 /15 22
12 41
8/60/100 74
4 /160 135
For air and creepage paths, test and operating voltage see page 10 -11
Current rating
Contacts resistance
The contact resistance has to be tested acc. to VG95319 part 2, Test no 5.10.1
Contact size Contact resistance
metric AWG mΩ max..
15S /15 16S /16 6,0
25 12 3,0
60 /100 81,0
160 4 0,3
MECHANICAL FEATURES
Ambient temperature
–55/125°C (-67/257°F)
Safety provisions
Bayonet coupling: IP 68 acc. to ISO 20653 (1 bar pressure within 16 hours)
Threaded coupling: IP65 acc. to ISO 20653
Vibration test
200 m /s² at 10 – 2000 Hz
Mating cycles
min. 500
Separating force per contact
The separating force has to be measured acc. to VG 95319 part 2, test no 5.7. using
the required test gage.
Contact size Separating force
metric AWG N min Gage
15S /15 16S /16 1,0 G 1,56
25 12 1,5 G 2,36
60/100 83,0 G 3,58
160 4 4,0 G 5,69
Gage see also VG95234 Part 1
Gage d DIA l
+0,01 –1
G 1,56 1,56 9
G 2,36 2,36 12
G 3,58 3,58 13
G 5,69 5,69 13
Contact retention
The contact retention has to be tested acc. to VG95319 part 2, Test no 5.4. Apply
test force in mating direction
Contact size Test force
metric AWG N
15S /15 16S /16 35
25 12 55
60/100 8 80
160 4 90
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
8
Product overview CGL 250 V–500 V
MECHANICAL FEATURES (continued)
Separating and mating force
Shell size A B
min. max
10SL 80 7,2
18 90 7,2
20 100 7,2
22 100 8,0
24 110 9,5
28 110 9,5
Coupling torques
The allowable coupling torques have to be tested under full bundle conditions of
the connectors acc. to VG95319 part 2, Test no. 5.8.2.
Shell size Allowable coupling torque Nm
Closing and opening Opening
CGL-B max. CGL/CGL-B min.
10SL 1,7 0,23
18 8,0 0,58
20 9,0 0,70
22 11,0 0,80
24 14,0 0,80
28 17,0 0,92
MECHANICAL FEATURES (continued)
Mounting dimension
Mounting holes for box
mounting connectors,
Style CGL02/CGL02-B
Shell size CGL02 CGL02-B CGL02/CGL02-B
ØD H12 ØD H13 ØD H12 ØD H13 E±0,1
10SL 16,0 3,1 18,5 3,2 18,2
18 28,7 3,1 31,1 3,2 27,0
20 31,8 3,1 34,5 3,2 29,4
22 35,0 3,1 37,8 3,2 31,8
24 38,2 3,7 41,3 3,7 34,9
28 44,5 3,7 47,1 3,7 39,7
CGL 06PG-B / CGL 06ME-B
CGL 06PG / CGL 06ME
A
B
CGL 02A-B
CGL 02A
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
9
Ordering reference
Series
Shell type
02 – box mounting receptacle with square ange see page 12
06 – straight plug see page 13
08 – plug with 90° adapter see page 14
Class
IN – Universal Endbell (nickel plated)
PG – with PG adapter (nickel plated)
ME – with metric adapter (nickel plated)
A – without endbell (style 02 only)
Shell size
10SL, 18, 20, 22, 24, 28
Contact arrangement see page 10–11
Contact type
P – pin
S – socket
Performance class
D1 – Grounding contact
Insulator type
L – long insulator = 250 V / 500 V
Bayonet coupling (for threaded version: omit indication)
Contacts*
F80 – crimp contacts
Outer cable diameter (Universal Endbell only)
Modication
F0 – without contacts
F42 – without endbell
*Crimp contacts are solderable
Part number explanation CGL IN A16 F80 D14PD1L– B– ***08 28
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
10
CONTACT ARRANGEMENTS
Shell size Figure Contact arrangement Contact number
Contact size
Grounding contact
in cavity
Admissible operating
voltage (VAC)
Examples of
available connectors
10SL A
B
C10SL-3 3
16S C 250
CGL02A10SL-3P-C1L***
CGL06PG10SL-3S-C1L-***
18
18-10 4
12 D 500
CGL02A18-10P-D1L-***
CGL02A18-10S-D1L-***
CGL06PG18-10P-D1L-***
CGL06PG18-10S-D1L-***
CGL08PG18-10S-D1L-***
CGL06IN18-10S-D1L-***
18-11 5
12 C 500
CGL02A18-11P-C1L-***
CGL06PG18-11S-C1L-***
CGL08PG18-11S-C1L-***
20
20G10 10
10x16 A 400
CGL02A20G10P-A1L-***
CGL02A20G10S-A1L-***
CGL06PG20G10P-A1L-***
CGL06PG20G10S-A1L-***
22 A
B
C
D
22-22 4
8D 500
CGL02A22-22P-D1L-***
CGL02A22-22S-D1L-***
CGL06PG22-22P-D1L-***
CGL06PG22-22S-D1L-***
CGL08PG22-22S-D1L-***
22-23 8
12 D 400
CGL02A22-23P-D1L-***
CGL02A22-23S-D1L-***
CGL06PG22-23P-D1L-***
CGL06PG22-23S-D1L-***
CGL08PG22-23S-D1L-***
24 A
B
C
D
E
F
G
H
24G8* 8
12 A 400
CGL02AH24G8P-A1L-***
CGL02AH24G8S-A1L-***
CGL06PGH24G28P-A1L-***
CGL06PGH24G28S-A1L-***
28
A
BC
DEF
GH
J
28A16
9
4x4
5x36
D 400
CGL02A28A16P-D1L-***
CGL02A28A16S-D1L-***
CGL06PG28A16P-D1L-***
CGL06PG28A16S-D1L-***
28G24*
24
4x12
20x16
A 500
CGL02AH28G24P-A1L-***
CGL02AH28G24S-A1L-***
CGL06PGH28G24P-A1L-***
CGL06PGH28G24S-A1L-***
* The insulator material is FKM. ***Modication codes please see ordering reference, page 9
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
11
CONTACT ARRANGEMENTS
LAYOUT SPECIFIC DATA
Contact arrangement Min. air distance (mm) / mating face Rated Voltage
Power-Contact Power-Grounding Signal-Contact Signal-Grounding Class
10SL-3 3,3 3,3 – – 250 V
18-10 5,0 5,0 – – 500 V
18-11 5,0 5,0 – – 500 V
20G10 4,3 4,0 – – 400 V
22-22 6,1 5,4 – – 500 V
22-23 4,3 4,0 – – 400 V
24G8 5,9 4,0 – – 400 V
28A16 8,0 4,6 6,1 5,0 400 V
28G24 7,5 5,6 3,4 2,7 500 V
Contact arrangement Min. creepage distance (mm) / mating face Rated Voltage
Power-Contact Power-Grounding Signal-Contact Signal-Grounding Class
10SL-3 3,3 3,3 – – 250 V
18-10 5,0 5,0 – – 500 V
18-11 5,0 5,0 – – 500 V
20G10 4,3 4,3 – – 400 V
22-22 6,1 6,1 – – 500 V
22-23 4,3 4,3 – – 400 V
24G8 5,9 4,0 – – 400 V
28A16 8,0 4,6 6,1 5,0 400 V
28G24 7,5 5,6 3,4 2,7 500 V
Admissible operating voltage
The admissible operating voltages indicated in this catalogue are mainly based on customer information for certain projects. The
tables above indicate the actual value for the air and creepage distances and can be used as a calculation basis in connection with
DIN EN 61984. All the plugs and receptacles equipped with a rst to mate last to break grounding contact are electrically linked
to the shell.
Basis and assumptions
The pollution degree for industrial plants is normally "3". However, the calculation of the admissible operating voltage is based on the
pollution degree "2", as the connectors are completely sealed and the contact parts are not subject to direct contamination or humidity.
Caculation basis for rated connector impulse voltage
Overvoltage category 250/500 V III
Material class 250/500 V III
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
12
BOX MOUNTING RECEPTACLE CLASS E CGL02
CGL02A-B with bayonet coupling
CGL02-B is a box mounting receptacle for front panel mounting. It mates with plugs CGL06-B and CGL08-B
Part No. (pin insert) Ø A E L M N Ø P S Ø T
max. ± 0,1 max. +0,4 ± 0,3 max. ± 0,3 +0,2/– 0,1
CGL02A10SL-3P-C1L-B-F80 18,2 18,2 33,6 14,2 2,8 16,2 25,4 3,2
CGL02A18-10P-D1L-B-F80 30,8 27,0 46,0 19,0 4,0 25,6 35,0 3,2
CGL02A18-11P-C1L-B-F80 30,8 27,0 33,8 19,0 4,0 25,6 35,0 3,2
CGL02A20G10P-A1L-B-F80 34,2 29,4 33,8 19,0 4,0 29,0 38,0 3,2
CGL02A22-22P-D1L-B-F80 37,4 31,8 46,0 19,0 4,0 32,2 41,0 3,2
CGL02A22-23P-D1L-B-F80 37,4 31,8 46,0 19,0 4,0 32,2 41,0 3,2
CGL02AH24G8P-A1L-B-F80 40,9 34,9 46,0 20,6 4,0 35,3 44,5 3,7
CGL02A28A16P-D1L-B-F80 46,7 39,7 46,0 20,6 4,0 41,4 50,8 3,7
CGL02AH28G24P-A1L-B-F80 46,7 39,7 46,0 20,6 4,0 41,4 50,8 3,7
For socket inserts substitute P with S
CGL02A with threaded coupling
CGL02A is a box mounting receptacle for front panel mounting. It mates with plugs CGL06 and CGL08
Part No. (pin insert) A E L M N Ø P S Ø T
Thread ±0,1 max. +0,4 ±0,3 max. ±0,3 +0,2/– 0,1
CGL02A10SL-3P-C1L-F80 5/8-24UNEF-2A 18,2 33,6 14,2 2,8 15,9 25,4 3,1
CGL02A18-10P-D1L-F80 1-1/8-18UNEF-2A 27,0 46,0 19,0 4,0 25,4 35,0 3,1
CGL02A18-11P-C1L-F80 1-1/8-18UNEF-2A 27,0 46,0 19,0 4,0 25,4 35,0 3,1
CGL02A20G10P-A1L-F80 1-1/4-18UNEF-2A 29,4 47,0 19,0 4,0 29,0 38,0 3,1
CGL02A22-22P-D1L-F80 1-3/8-18UNEF-2A 31,8 46,0 19,0 4,0 32,2 41,0 3,1
CGL02A22-23P-D1L-F80 1-3/8-18UNEF-2A 31,8 46,0 19,0 4,0 32,2 41,0 3,1
CGL02AH24G8P-A1L-F80 1-1/2-18UNEF-2A 34,9 46,0 20,6 4,0 35,3 44,5 3,7
CGL02A28A16P-D1L-F80 1-3/4-18UNS-2A 39,7 46,0 20,6 4,0 41,2 50,8 3,7
CGL02AH28G24P-A1L-F80 1-3/4-18UNS-2A 39,7 46,0 20,6 4,0 41,2 50,8 3,7
For socket inserts substitute P with S
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
13
STRAIGHT PLUG CLASS PG CGL06
CGL06PG/ME-B with bayonet coupling
CGL06PG/ME-B designates a straight plug for the use of heat shrink boots or PG terminations (optional a metric adapter is available). It mates with receptacle CGL02A-B
Part No. (socket insert) Ø A Ø E L W
max. max. max. PG Thread ME Thread
CGL06PG10SL-3S-C1L-B-F80 22,8 21,0 58,0 PG9 M 16 x 1,5
CGL06PG18-10S-D1L-B-F80 36,5 32,0 70,0 PG21 M 25 x 1,5
CGL06PG18-11S-C1L-B-F80 36,5 32,0 70,0 PG21 M 25 x 1,5
CGL06PG20G10S-A1L-B-F80 39,9 32,0 77,0 PG21 M 25 x 1,5
CGL06PG22-22S-D1L-B-F80 43,1 32,0 82,0 PG21 M 32 x 1,5
CGL06PG22-23S-D1L-B-F80 43,1 32,0 82,0 PG21 M 32 x 1,5
CGL06PGH24G8S-A1L-B-F80 46,6 40,0 82,0 PG28 M 32 x 1,5
CGL06PG28A16S-D1L-B-F80 53,4 50,0 87,0 PG36 M 32 x 1,5
CGL06PGH28G24S-A1L-B-F80 53,4 50,0 87,0 PG36 M 32 x 1,5
For pin inserts substitute S with P For ME-adapter substitute PG with ME
CGL06PG/ME with threaded coupling
CGL06PG/ME designates a straight plug for the use of heat shrink boots or PG terminations (optional a metric adapter is available). It mates with receptacle CGL02A.
Part No. (socket insert) Ø A C Ø E L W
max. Thread max. max. PG Thread ME Thread
CGL06PG10SL-3S-C1L-F80 24,1 5/8-24UNEF-2B 21,0 60,0 PG9 M 16 x 1,5
CGL06PG18-10S-D1L-F80 36,5 1-1/8-18UNEF-2B 32,0 70,0 PG21 M 25 x 1,5
CGL06PG18-11S-C1L-F80 36,5 1-1/8-18UNEF-2B 32,0 70,0 PG21 M 25 x 1,5
CGL06PG20G10S-A1L-F80 37,3 1-1/4-18UNEF-2B 32,0 77,0 PG21 M 25 x 1,5
CGL06PG22-22S-D1L-F80 43,1 1-3/8-18UNEF-2B 32,0 82,0 PG21 M 32 x 1,5
CGL06PG22-23S-D1L-F80 40,5 1-3/8-18UNEF-2B 32,0 82,0 PG21 M 32 x 1,5
CGL06PGH24G8S-A1L-F80 43,7 1-1/2-18UNEF-2B 40,0 82,0 PG29 M 32 x 1,5
CGL06PG28A16S-D1L-F80 50,0 1-3/4-18UNS-2B 50,0 87,0 PG36 M 32 x 1,5
CGL06PGH28G24S-A1L-F80 50,0 1-3/4-18UNS-2B 50,0 87,0 PG36 M 32 x 1,5
For pin inserts substitute S with P For ME-adapter substitute PG with ME
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
14
90° PLUG CLASS PG CGL08
CGL08PG-B with bayonet coupling
CGL08PG-B designates a 90° plug for the use of heat shrink boots or PG terminations. It mates with receptacle CGL02A-B (metric thread option not available)
Part No. (pin Insert) Ø A L W
max. max. PG Thread
CGL08PG10SL-3P-C1L-B-F80 22,8 57,0 PG9
CGL08PG18-10P-D1L-B-F80 36,5 77,0 PG16
CGL08PG18-11P-C1L-B-F80 36,5 77,0 PG16
CGL08PG20G10P-D1L-B-F80 39,9 82,0 PG21
CGL08PG22-22P-D1L-B-F80 43,1 82,0 PG21
CGL08PG22-23P-F1L-B-F80 43,1 82,0 PG21
For socket inserts substitute P with S
CGL08PG with threaded coupling
CGL08PG designates a 90° plug for the use of heat shrink boots or PG terminations. It mates with receptacle CGL02A (metric thread option not available)
Part No. (pin Insert) Ø A C L W
max. Thread max. PG Thread
CGL08PG10SL-3P-C1L-F80 24,1 5/8-24UNEF-2B 57,0 PG9
CGL08PG18-10P-D1L-F80 34,1 1-1/8-18UNEF-2B 77,0 PG16
CGL08PG18-11P-C1L-F80 34,1 1-1/8-18UNEF-2B 77,0 PG16
CGL08PG20G10P-D1L-F80 37,4 1-1/4-18UNEF-2B 82,0 PG21
CGL08PG22-22P-D1L-F80 40,5 1-3/8-18UNEF-2B 82,0 PG21
CGL08PG22-23P-F1L-F80 40,5 1-3/8-18UNEF-2B 82,0 PG21
For socket inserts substitute P with S
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
15
CONNECTORS WITH UNIVERSAL ENDBELL, STRAIGHT PLUG
CGL06IN-B with bayonet coupling
Part No. (pin Insert) Ø A Ø E L Cable entry diameter D Cable sealing area
max. ±0,2 max.
CGL06IN10SL-3P-C1L-B-F80 22,8 17,9 82 D07 = 4,5 mm – 7,2 mm D07
CGL06IN18-10P-D1L-B-F80 36,5 30,0 88 D11 = 8,0 mm – 10,3 mm D11, D13, D14
CGL06IN18-11P-C1L-B-F80 36,5 30,0 88 D13 = 9,0 mm – 12,5 mm D11, D13, D14
CGL06IN20G10P-A1L-B-F80 39,9 33,6 92 D14 =11,5 mm – 14,2 mm D13, D14, D17
CGL06IN22-22P-D1L-B-F80 43,1 33,6 98 D17 =14,5 mm – 16,6 mm D14, D17, D19
CGL06IN22-23P-D1L-B-F80 43,1 33,6 98 D19 =16,1 mm – 18,4 mm D14, D17, D19
CGL06IN28-A16P-D1L-B-F80 53,4 33,6 105 D20 =17,8 mm – 20,0 mm D14, D17, D19, D20
CGL06INH28G24P-A1L-B-F80 53,4 33,6 105 D14, D17, D19, D20
For socket inserts substitute P with S
CGL06IN with threaded coupling
Part No. (pin Insert) Ø A Ø E L C Cable entry diameter D Cable sealing area
max. ±0,2 max. Thread
CGL06IN10SL-3P-C1L-F80 22,8 17,9 82,0 5/8-24UNEF-2B D07 = 4,5 mm – 7,2 mm D07
CGL06IN18-10P-D1L-F80 36,5 30,0 88,0 1-1/8-18UNEF-2B D11 = 8,0 mm – 10,3 mm D11, D13, D14
CGL06IN18-11P-C1L-F80 36,5 30,0 88,0 1-1/8-18UNEF-2B D13 = 9,0 mm – 12,5 mm D11, D13, D14
CGL06IN20G10P-A1L-F80 39,9 33,6 92,0 1-1/4-18UNEF-2B D14 =11,5 mm – 14,2 mm D13, D14, D17
CGL06IN22-22P-D1L-F80 43,1 33,6 98,0 1-3/8-18UNEF-2B D17 =14,5 mm – 16,6 mm D14, D17, D19
CGL06IN22-23P-D1L-F80 40,5 33,6 98,0 1-3/8-18UNEF-2B D19 =16,1 mm – 18,4 mm D14, D17, D19
CGL06IN28-A16P-D1L-F80 53,4 33,6 105,0 1-3/4-18UNS-2B D20 =17,8 mm – 20,0 mm D14, D17, D19, D20
CGL06INH28G24P-A1L-F80 53,4 33,6 105,0 1-3/4-18UNS-2B D14, D17, D19, D20
For socket inserts substitute P with S
CONNECTORS WITH UNIVERSAL ENDBELL, 90°-VERSION
CGL08IN-B with bayonet coupling CGL08IN with threaded coupling
CGL 250 V– 500 V VERSIONS
For more information
please contact your local
ITT customer service.
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
16
CA (CGL) 300V #22, SPECIAL VERSION
STRAIGHT PLUG WITH SHORT PG GLAND ADAPTER PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CA06COM-E22-23P-F0-SPL CA120001-47 CA06COM-E22-23S-F0-SPL CA120001-48
WALL MOUNTING RECEPTACLE PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CA02COM-E22-23P-F0-SPL CA120001-49 CA02COM-E22-23S-F0-SPL CA120001-50
CABLE CONNECTING PLUG WITH SHORT PG GLAND ADAPTER PIN CONTACTS*
Pin contacts*
Part number description Ordering designation
CA01COM-E22-23P-F0-SPL CA120001-51
*Ordering table for contacts (Contacts to be ordered separately)
Number of contacts permitted Contact size Terminal size Socket contact crimp Pin contact crimp Grounding screw
7 12 0,5² 031-8557-040 330-8515-104 –
7 12 1,5² 031-8557-020 330-8515-102 –
7 12 2,5² 031-8557-000 330-8515-101 –
7 12 4,0² 031-8557-010 330-8515-103 –
7 12 6,0² 031-8557-030 330-8515-105 –
1 12 Ground 0,5² 031-8665-020 330-8723-022 250-8501-023
1 12 Ground 1,5² 031-8665-021 330-8723-023 250-8501-023
1 12 Ground 2,5² 031-8665-010 330-8723-010 250-8501-023
1 12 Ground 4,0² 031-8665-002 330-8723-003 250-8501-023
1 12 Ground 6,0² 031-8665-024 330-8723-026 250-8501-023
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
17
CA (CGL) 300V #28, SPECIAL VERSION
STRAIGHT PLUG WITH SHORT PG ADAPTER PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CA06COM-E28-2009-16P-F0-SPL CA120001-52 CA06COM-E28-2009-16S-F0-SPL CA120001-53
WALL MOUNTING RECEPTACLE, PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CA02COM-E28-16P-2009-F0-SPL CA120001-54 CA02COM-E28-16S-2009-F0-SPL CA120001-55
CABLE CONNECTING PLUG WITH SHORT PG GLAND ADAPTER PIN CONTACTS*
Pin contacts*
Part number description Ordering designation
CA00COM-E28-2009-16P-F0-SPL CA120001-56
*Ordering table for contacts (Contacts to be ordered separately)
Number of contacts permitted Contact size Terminal size Socket contact crimp Pin contact crimp Grounding screw
5 16 0,5² 031-8639-120 330-8659-000 –
5 16 1,5² 031-8556-110 030-8587-000 –
3 4 10,0² 031-8560-020 030-8658-010 –
3 4 16,0² 031-8560-000 030-8658-020 –
1 4 Ground 10,0² 031-8502-003 030-8593-002 250-8501-023
1 4 Ground 16,0² 031-8502-002 030-8593-003 250-8501-023
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
18
ACCESSORIES
PROTECTIVE CAPS for receptacles with bayonet coupling
Part No. Shell size B Ø D L Ø T
max. max. ±10 +0,5
CA121003-701 10SL 19,5 23,4 100 4,3
CA121003-706 18 24,5 36,7 113 4,3
CA121003-707 20 24,5 40,1 127 4,3
CA121003-708 22 24,5 43,3 127 4,3
CA121003-709 24 24,5 46,8 127 4,3
CA121003-710 28 24,5 52,6 169 5,5
PROTECTIVE CAPS for receptacles with threaded coupling
Part No. Shell size A B L Ø T Ø D
Thread max. max. +0,4 max.
CA121003-601 10SL 5/8-24UNEF-2B 11,7 107 3,4 20,2
CA121003-606 18 1-1/8-20UNEF-2B 11,7 120 3,4 32,9
CA121003-607 20 1-1/4-18UNEF-2B 11,7 134 3,4 36,1
CA121003-608 22 1-3/8-18UNEF-2B 11,7 134 3,4 39,4
CA121003-609 24 1-1/2-18UNEF-2B 11,7 147 4,2 42,6
CA121003-610 28 1-3/4-18UNS-2B 13,3 200 4,2 48,9
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
19
ACCESSORIES
PROTECTIVE CAPS for plugs with bayonet coupling
Part No. Shell size B Ø D L Ø T
max. max. ±10 +0,5
CA121004-701 10SL 29,0 20,7 100 4,3
CA121004-706 18 37,0 33,3 127 4,3
CA121004-707 20 37,0 36,7 140 4,7
CA121004-708 22 37,0 39,9 140 4,7
CA121004-709 24 37,0 43,4 140 4,7
CA121004-710 28 37,0 49,2 197 4,7
PROTECTIVE CAPS for plugs with threated coupling
Part No. Shell size A B L Ø T Ø D
Thread max max +0,4 max.
CA121004-601 10SL 5/8-24UNEF-2A 20,5 16,7 107 4
CA121004-606 18 1-1/8-18UNEF-2A 25,0 29,4 120 4
CA121004-607 20 1-1/4-18UNEF-2A 25,0 32,5 134 4,8
CA121004-608 22 1-3/8-18UNEF-2A 25,0 35,7 134 4,8
CA121004-609 24 1-1/2-18UNEF-2A 25,0 38,9 147 4,8
CA121004-610 28 1-3/4-18UNS-2A 25,0 45,2 207 4,8
CGL 250 V– 500 V VERSIONS
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
20
CGL 250 V– 500 V VERSIONS
TOOLING
HYDRAULIC HAND CRIMPING TOOL HPW400U-ITT
for crimping contacts of size 60/100/8, 160/4 and 500/0.
Order No. 121586-5257
CRIMP DIE
Contact size Crimp dies for hydraulic tool Wrench Size Locator
60/100/8 CT 121586-5231 5,20 CT 121586-5232
160/4 CT 121586-5230 7,25
HAND CRIMPING TOOL M22520-1/01 for contacts 0,75 – 6,0 mm²
Order No. 121586-5257
CRIMP LOCATOR TH452*
Order No. 995-0002-052
HAND CRIMPING TOOL CCT-CGF-E for ground contacts 0,75 – 6,0 mm²
Order No. 121586-0087
*modied locators are availabe for connectors shown on page 16 –17. Please contact factory!
INSERTION TOOLS
Description Name Order No. ref.
Insertion tool for contact size #16 16CIT-1612 121086-3008
Insertion pliers for contact size #16 CIT-F80-16 121086-0097
Insertion tool for contact size #12 CIT-12 121086-3007
Insertion pliers for contact size #12 CIT-F80-12 121086-0096
Insertion tool for contact size #8 CIT-8 121086-0095
Insertion tool for contact size #4 CIT-4 121086-0094
Guide pin #12 27977-12T8
Guide pin #16 27977-16T50
Extraction tool for #16 CET-F80-16 121086-0081
Extraction tool #12 CET-F80-12 121086-0080
Extraction tool #8 CET-8 121086-0079
Extraction tool #4 CET-4 121086-0078
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
21
CGL 700 V SPECIAL VERSIONS
Product overview CGL 700 V
700 V POWER INPUT CONNECTOR
Specication CGL #II (28-11) CGL #III (36-11)
Electrical conditions
Operating voltage 700 V (DC) 700 V (DC)
Insulation category (DIN/VDE 0110) II II
Degree of pollution (DIN/VDE 0110) 3 3
Rated insulation voltage (DIN/VDE 0110) 7,2 KV 7,2 KV
Insulation resistance 20 – 80 TΩ (Tera=10¹²) 20 – 80 TΩ (Tera=10¹²)
Temperature range – 50 / 140°C – 50/140°C
Current rating
Power contacts 41 A 100 A
Signal contacts 22 A 22 A
Mating cycles 500 min. 500 min.
Degree of protection by enclosures
ISO 20653 IP67 (mated condition) IP67 (mated condition)
Contact arrangement / Plating / Termination
Number of contacts 3 Power, 1 Ground, 7 Signal 3 Power, 1 Ground, 7 Signal
Contact plating Silver Silver
Wire size Crimp 2,5 / 4 / 6 mm² Crimp 6 / 10 / 16 / 25 mm²
Grounding (pin rst to mate last to break) Crimp 2,5 / 4 / 6 mm² Crimp 6 / 10 / 16 /25 mm²
Signal contacts Crimp 1,5 mm² Crimp 1,5 mm²
Receptacle housing and straight plug
Coupling system Bayonet Bayonet
Plating Nickel Nickel
Polarization 5 key way 5 key way
Material Aluminium alloy Aluminium alloy
Available types see pages 23 see pages 24
Insulator
Material Plastic (UL94-V0) Plastic (UL94-V0)
Design Fully insulated pin contact for increased creepage distance Fully insulated pin contact for increased creepage distance
Contact insertion extraction principle Rear release Rear release
Sealing gaskets
Material Fluor elastomere Fluor elastomere
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
22
CONTACT ARRANGEMENTS
Shell size Figure Contact arrangement Contact number
Contact size
Grounding contact
in cavity
Admissible operating
voltage (VAC)
Available connectors
28
28-11
11
4x12
7x16
D 700
CGL66PG28-11P-E1D-B-F0-SPL
CGL66PG28-11S-E1D-B-F0-SPL
CGL61PG28-11P-E1D-B-F0-SPL
CGL62A28-11P-E1D-B-F0-SPL
CGL62A28-11S-E1D-B-F0-SPL
36
36-11
11
4x4
7x16
D 700
CGL66PG36-11S-E1D-B-F0-SPL
CGL61PG36-11P-E1D-B-F0-SPL
CGL62A36-11P-E1D-B-F0-SPL
CGL66PG36-11P-E1D-B-F0-SPL
CGL62A36-11S-E1D-B-F0-SPL
CGL 700 V SPECIAL VERSIONS
LAYOUT SPECIFIC DATA
Contact arrangement Min. air distance (mm) /mating face Min. creepage distance (mm) /mating face Rated Voltage
Power-Contact Power-Grounding Power-Power Power-Grounding Class
28-11 19,7 12,5 19,7 12,5 700 V
36-11 10,3 10,3 10,3 10,3 700 V
Admissible operating voltage
The admissible operating voltages indicated in this catalogue are mainly based on customer information for certain projects. The
table aboved indicates the actual value for the air and creepage paths and can be used as a calculation basis in connection with
DIN EN 61984. All the plugs and receptacles equipped with a rst to mate last to break grounding contact are electrically linked
to the shell.
Basis and assumptions
The pollution degree for industrial plants is normally "3". However, the calculation of the admissible operating voltage is based on the
pollution degree "2", as the connectors are completely sealed and the contact parts are not subject to direct contamination or humidity.
Caculation basis for rated connector impulse voltage
Overvoltage category 700 V III
Material class 700 V II
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
23
CGL 700V #28, SPECIAL VERSION
STRAIGHT PLUG WITH PG GLAND ADAPTER PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CGL66PG28-11P-E1D-B-F0-SPL CGL 120015-9 CGL66PG28-11S-E1D-B-F0-SPL CGL120015-8
CABLE CONNECTING PLUG WITH PG GLAND ADAPTER PIN CONTACTS*
Pin contacts*
Part number description Ordering designation
CGL61PG28-11P-E1D-B-F0-SPL CGL120015-10
WALL MOUNTING RECEPTACLE PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CGL62A28-11P-E1D-B-F0-SPL CGL120015-11 CGL62A28-11S-E1D-B-F0-SPL CGL120015-12
*Ordering table for contacts (Contacts to be ordered separately)
Number of contacts permitted Contact size Terminal size Socket contact crimp Pin contact crimp Grounding screw
3 12 2,5² 031-8716-021 030-8719-049 –
3 12 4,0² 031-8716-022 030-8719-070 –
3 12 6.0² 031-8716-025 030-8719-071 –
1 12 Ground 2,5² 031-8716-031 030-8719-074 250-8501-023
1 12 Ground 4,0² 031-8716-032 030-8719-075 250-8501-023
1 12 Ground 6,0² 031-8716-033 030-8719-076 250-8501-023
7 16 1,5² 031-8716-019 030-8719-045 –
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
24
STRAIGHT PLUG WITH PG GLAND ADAPTER PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CGL66PG36-11P-E1D-B-F0-SPL CGL120015-2 CGL66PG36-11S-E1D-B-F0-SPL CGL120015-1
CABLE CONNECTING PLUG WITH PG GLAND ADAPTER PIN CONTACTS*
Pin contacts*
Part number description Ordering designation
CGL61PG36-11P-E1D-B-F0-SPL CGL120015-3
WALL MOUNTING RECEPTACLE PIN AND SOCKET CONTACTS*
Pin contacts* Socket contacts*
Part number description Ordering designation Part number description Ordering designation
CGL62A36-11P-E1D-B-F0-SPL CGL120015-4 CGL62A36-11S-E1D-B-F0-SPL CGL120015-5
*Ordering table for contacts (Contacts to be ordered separately)
Number of contacts permitted Contact size Terminal size Socket contact crimp Pin contact crimp Grounding screw
3 4 6² 031-8716-014 030-8719-057
3 4 10² 031-8716-015 030-8719-058
3 4 16² 031-8716-016 030-8719-059
3 4 25² 031-8716-017 030-8719-043
1 4 Ground 6² 031-8716-020 030-8719-060 250-8501-023
1 4 Ground 10² 031-8716-028 030-8719-061 250-8501-023
1 4 Ground 16² 031-8716-029 030-8719-062 250-8501-023
1 4 Ground 25² 031-8716-027 030-8719-044 250-8501-023
7 16 1,5² 031-8716-019 030-8719-045
CGL 700 V #36, SPECIAL VERSIONS
3 4 6² 030-8719-057
3 4 10² 030-8719-058
3 4 16² 030-8719-059
3 4 25² 030-8719-043
1 4 Ground 6² 030-8719-060
1 4 Ground 10² 030-8719-061
1 4 Ground 16² 030-8719-062
1 4 Ground 25² 030-8719-044
7 16 1,5² 030-8719-045
www.ittcannon.com
Dimensions shown in mm | Specications and dimensions subject to change
25
TOOLING
TOOLS FOR CGL #28 Type Contacts Terminal size
Pin Socket
Hand crimp tool
(for #12 and #16 contacts as indicated) EUS101-2 030-8719-049
030-8719-070
030-8719-071
031-8716-021
031-8716-022
031-8716-025
2,5²
4,0²
6,0²
Crimp positioner CT120090-113
Contact insertion tool, #12 contacts CIT12
Contact extraction tool, #12 contacts CT121586-300
Contact insertion tool, #16 contacts CIT16 030-8719-045 031-8716-019
Contact extraction tool, #16 contacts CET-ATR-2160
Type Contacts Terminal size
Pin Socket
Hand crimp tool for grounding contact,
crimp positioner included in the tool above,
no insertion or extraction tool needed
CCT-CGF-E 030-8719-074 031-8716-031 2,5²
030-8719-075 031-8716-032 4,0²
030-8719-076 031-8716-033 6,0²
TOOLS FOR CGL #36 Type Contacts Terminal size
Pin Socket
Hand crimp tool (for #16 contacts as indicated) EUS101-2
030-8719-045 031-8716-019 1,5²
Crimp positioner CT120090-113
Contact insertion tool #16 contacts CIT16
Contact extraction tool #16 contacts CET-ATR-2160
Type Contacts Terminal size
Pin Socket
Hydraulic crimp tool for power and
grounding contacts
HPW400U-ITT
121586-5257
030-8719-057 031-8716-014 6²
030-8719-058 031-8716-015 10²
Crimp die for hydraulic tool 121586-5230 030-8719-059 031-8716-016 16²
Contact insertion tool CIT4 030-8719-043 031-8716-017 25²
Contact extraction tool #4 contacts CT120090-56 030-8719-060 031-8716-020 6²
030-8719-061 031-8716-028 10²
030-8719-062 031-8716-029 16²
030-8719-044 031-8716-027 25²
CGL 700 V SPECIAL VERSIONS
www.ittcannon.com26
PRODUCT SAFETY INFORMATION
1. MATERIAL CONTENT AND PHYSICAL
FORM
Electrical connectors do not usually contain
hazardous materials. They contain
conducting and non-conducting materials
and can be divided into two groups.
a) Printed circuit types and low cost audio
types which employ all plastic insulators and
casings.
b) Rugged, Fire Barrier and High Reliability
types with metal casings and either natural
rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary
with type of connector and also application
and are usually manufactured from either:
Copper, copper alloys, nickel, alumel,
chromel or steel. In special applications,
other alloys may be specied.
2. FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no re hazard when the connector
is correctly wired and used within the spec-
ied parameters.
Incorrect wiring or assembly of the connector
or careless use of metal tools or conductive
uids, or transit damage to any of the
component parts may cause electric shock
or burns. Live circuits must not be broken
by separating mated connectors as this may
cause arcing, ionization and burning. Heat
dissipation is greater at maximum resistance
in a circuit. Hot spots may occur when resis
-
tance is raised locally by damage, e.g.
cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect applica-
tion tools or from poor quality soldering or
slack screw terminals. Overheating may
occur if the ratings in the product Data
Sheet/Catalog are exceeded and can cause
breakdown of insulation and hence electric
shock. If heating is allowed to continue it
intensies by further increasing the local
resistance through loss of temper of spring
contacts, formation of oxide lm on contacts
and wires and leakage currents through
carbonization of insulation and tracking
paths. Fire can then result in the presence
of combustible materials and this may
release noxious fumes. Overheating may not
be visually apparent. Burns may result from
touching overheated components.
3. HANDLING
Care must be taken to avoid damage to any
component parts of electrical connectors
during installation and use. Although there
are normally no sharp edges, care must be
taken when handling certain components
to avoid injury to ngers.
Electrical connectors may be damaged in
transit to the customers, and damage may
result in creation of hazards. Products
should therefore be examined prior to instal-
lation/use and rejected if found to be
damaged.
4. DISPOSAL
Incineration of certain materials may release
noxious or even toxic fumes.
5. APPLICATION
Connectors with exposed contacts should
not be selected for use on the current supply
side of an electrical circuit, because an elec-
tric shock could result from touching
exposed contacts on an unmated connector.
Voltages in excess of 30 V ac or 42.5 V DC
are potentially hazardous and care should
be taken to ensure that such voltages cannot
be transmitted in any way to exposed metal
parts of the connector body. The connector
and wiring should be checked, before
making live, to have no damage to metal
parts or insulators, no solder blobs, loose
strands, conducting lubricants, swarf, or any
other undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting
paths. Always use the correct application
tools as specied in the Data Sheet/Catalog.
Do not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating
voltage. The admissible operating voltages
depend on the individual applications and
the valid national and other applicable
safety regulations. For this reason the air
and creepage path data are only reference
values. Observe reduction of air and
creepage paths due to PC board and/or
harnessing.
(ii) Temperature
All information given are temperature limits.
The operation temperature depends on the
individual application.
(iii) Other important information
Cannon continuously endeavors to improve
their products. Therefore, Cannon products
may deviate from the description, technical
data and shape as shown in this catalog and
data sheets.
ITT's Interconnect Solutions, is a division of
ITT Corporation who manufactures the
highest quality products available in the
marketplace; however these products are
intended to be used in accordance with the
specications in this publication. Any use or
application that deviates from the stated
operating specifications is not recom-
mended and may be unsafe. No information
and data contained in this publication shall
be construed to create any liability on the
part of Cannon. Any new issue of this publi-
cation shall automatically invalidate and
supersede any and all previous issues.
Product Warranty
A limited warranty applies to Cannon prod-
ucts. In general, except for obligations
assumed by Cannon under this warranty,
Cannon shall not be liable for any loss,
damage, cost of repairs, incidental or conse-
quential damages of any kind, whether or
not based on express or implied warranty,
contract, negligence or strict liability arising
in connection with the design, manufacture,
sale, use or repair of the products. Product
availability, prices and delivery dates are
exclusively subject to our respective order
conrmation form; the same applies to
orders based on development samples deliv-
ered. Please refer to www.ittcannon.com
(General Terms of Sale) for the complete text
of Cannon’s applicable Terms and Condi-
tions, including Warranty.
This publication is not to be construed as an
offer. It is intended merely as an invitation
to make an offer. By this publication, Cannon
does not assume responsibility or any
liability for any patent infringements or
other rights of third parties which may result
from its use.
Reprinting this publication is generally
permitted, indicating the source. However,
Cannon’s prior consent must be obtained in
all cases. “Engineered for life” is a registered
trademark of ITT Corporation ©2012. All
other trademarks or registered trademarks
are property of their respective owners. All
data subject to change without notice.
This document does not contain technical
data whose export is restricted by the Arms
Export Control Act (Title 22, U.S.C., App
2401 et. Seq.)
www.ittcannon.com 27
Circular / Filter / Hermetic / Fiber Optic Connectors
As a world leader in circular, lter, and hermetic connectors, ITT can
leverage its design and manufacturing expertise to t virtually any
application. Our expertise includes fast positive mating for a
wide range of military applications, as well as numerous sizes
and contact congurations for various harsh environments. Our
wide variety of ber optic products include hybrid contacts,
multi-channel, rack and panel, and hi-rel assemblies, including MIL
and ARINC standard solutions that meet numerous specications,
including NATO and MIL standards.
D-Subminiature Connectors
Cannon invented D-sub connectors in 1952. Our family of D-Subs
now includes combinations of signal, power and RF, as well as
severe service sealed connectors. Cannon D-Subs are available
with an extensive line of backshells and accessories and are one
of the most economical shielded connector solutions available. ITT
D-Sub connectors are qualied to the MIL-DTL-24308 specication.
Microminiature Connectors
Developed rst by Cannon in the 1960’s, ITT's Interconnect Solutions
microminiature connectors offer high performance and reliability
with exceptional versatility. Available in rectangular, circular, and strip
congurations for countless applications, many of our connectors meet
or exceed applicable requirements of the MIL-DTL-83513 specication.
Rack and Panel Connectors
Initially pioneered by Cannon during the 1930s, ITT's Interconnect Solutions
is the world leader in rack and panel connectors, offering unmatched
variety of shell congurations and insert arrangements, materials, plating,
and contact options. Many of our standard and custom designs meet the
stringent requirements of ARINC 600, ARINC 404 (MIL-C-81659), and
MIL-DTL-83733 standards.
Trident
Cannon’s Trident Connector System is a versatile range of electrical
connectors based on a standard contact design. These contacts are fully
interchangeable throughout the Trident Connector System. The connector
options include low cost rectangular, rack and panel, industrial grade
circulars, harsh environment circulars and shielded circulars.
Transportation
The ITT's Interconnect Solutions includes sealed circular and rectangular connectors in
metal or plastic shells. These congurations include board to cable or cable to cable /
bulkhead applications. Both signal and power contacts can be combined in various
layouts. All product lines within the Transportation segment offer very low contact
resistance providing maximum signal integrity.
ITT's Interconnect Solutions is an international manufacturer and supplier of connectors including circular, rectangular, ber optic, RF, power and
high voltage, audio, PMCIA, Compact Flash Card, enclosures, cable assemblies, and application specic custom solutions. The Interconnect
Solutions portfolio includes the brands Cannon, VEAM, and BIW Connector Systems. As a worldwide leader in connector technology for nearly a
century, ITT offers one of the broadest product offerings, six sigma manufacturing capability, Value Based Product Development with exception-
al engineering capability, and an extensive sales, distribution, and customer support network.
ITT Interconnect Solutions
Cannon, VEAM,
BIW Connector Systems
Visit our website at
www.ittcannon.com
© 2013 ITT Corporation ”Engineered for life” and “Cannon” are registered trademarks of
ITT Corporation. Specication and other data are based on information available at the time
of printing, and are subject to change without notice.
Global Design &
Manufacturing
Customer Support
CHINA – Cannon, VEAM
Tuopandun Industrial Area,
Jinda Cheng, Xiner Village, Shajing Town,
Boan District, Shenzhen City,
Guangdong Province, China 518125
phone: +86.755.2726.7238
fax: +86.755.2726.7515
HONG KONG – Cannon, VEAM
Units 2405-6, 24/F, ING Tower
308 Des Voeux Road Central
Hong Kong
phone: +852.2732.2720
fax: +852.2732.2919
INDIA – Cannon, VEAM
ITT Corporation India Pvt Ltd
Money Chamber, Unit No. 202
#6, KH Road, Bangalore
560027
phone: +91 22 67843000
fax: +91 22 26783033
JAPAN – Cannon, VEAM
5-11-3, Hibarigaoka,
Zama-shi, Kanagawa, Japan 252-0003
phone: +81.462.57.2010
fax: +81.462.57.1680
SINGAPORE – Cannon, VEAM
10 Jalan Kilang #06-01
Singapore 159410
phone: +65.62763693 ext 232
fax: +65.62763685
FRANCE – Cannon, VEAM
15, Boulevard Robert Thiboust
Serris, France 77700
phone: +33.1.60.04.93.93
fax: +33.1.60.04.93.90
GERMANY – Cannon, VEAM
Cannonstrasse 1
71384 Weinstadt
phone: +49.7151.699.0
fax: +49.7151.699.217
ITALY – VEAM
Corso Europa 41/43
Lainate (MI), Italy 20020
phone: +39.02938721
fax: +39.0293872300
LEBANON – BIW Connector
Systems
P.O. Box 199
Jounieh
Lebanon
phone: +961.9.911.560
fax: +961.9.912.126
UK – Cannon, VEAM
Jays Close, Viables Estate
Basingstoke, RG22 4BA
phone: +44.1256.311200
fax: +44.1256.323356
North America Europe & Middle East Asia
MEXICO – Cannon, VEAM
Av. Libre Comercio s/n-
entre Calzada Industrial
Nuevo Nogales y Calzada del Raquet Club,
Parque Industrial Nuevo Nogales
phone: +52.631.3110050
fax: +52.631.3110060
USA – Cannon
666 East Dyer Road
Santa Ana, CA 92705
toll free: +1.800.854.3028
phone: +1.714.557.4700
fax: +1.714.628.2142
USA – BIW Connector Systems
500 Tesconi Circle
Santa Rosa, CA 95401
phone: +1.707.523.2300
fax: +1.707.523.3567
USA - VEAM
100 New Wood Road
Watertown, CT 06795
phone: +1.860.274.9681
fax: +1.860.274.4963