1
Connectors (Inlets/Outlets) 6061
https://www.schurter.com /PG07
Connectors
IEC Appliance Inlet C14/C18, Screw-on Mounting, Front Side, Solder or Quick-connect, Screw Terminal
Approvals and Compliances
C14
70° C
C18
70° C
Description
- Panel Mount :
Screw-on mounting , Front Side
- 1 Function
- Appliance Inlet , Pin temperature 70 °C , protection class I or II
- Solder, Quick Connect or Screw Terminals
Other versions on request
- Variant with notch for V-Lock mating Cordsets
- PCB terminals
Weblinks
pdf datasheet, html-datasheet, General Product Information, Distributor-
Stock-Check, Accessories, Detailed request for product, Microsite
Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.
The cord latching system prevents against accidental removal of the cordset.
Technical Data
Ratings IEC 10 A / 250 VAC; 50 Hz
Ratings UL/CSA 15 A / 250 VAC; 60 Hz
Dielectric Strength > 3 kVAC between L-N
> 1.5 kVAC between L/N-PE
(1 min/50 Hz)
Allowable Operation Tempe-
rature
-25 °C to 70 °C
IP-Protection from front side IP 20 acc. to IEC 60529
Insulation cover Suitable for appliances with protection
class I or II acc. to IEC 61140
Material: Housing PA6, black / grey / white, UL 94V-0
appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1
UL 60320-1, CSA C22.2 no. 60320-1
(for cold conditions) pin-temperature 70
°C, 10 A, Protection Class I or II
Approvals and Compliances
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about
Approvals
Approvals
The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.
Approval Reference Type: 6061
Approval Logo Certificates Certification Body Description
VDE Approvals VDE Certificate Number: 40011871
UL Approvals UL UL File Number: E96454
CSA Approvals CSA CSA Certification Record: 27324
CSA Approvals CSA CCC File Number: 27324
2
Connectors (Inlets/Outlets)
6061 https://www.schurter.com /PG07
Connectors
Product standards
Product standards that are referenced
Organization Design Standard Description
Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes
Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles
Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices
Application standards
Application standards where the product can be used
Organization Design Standard Description
Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information
technologyequipment.
Compliances
The product complies with following Guide Lines
Identification Details Initiator Description
CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable
requirements laid down in the harmonisation of Community legislation on
its affixing in accordance with EU Regulation 765/2008.
RoHS SCHURTER AG EU Directive RoHS 2011/65/EU
China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March
2007. It is similar to the EU directive RoHS.
REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,
Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as
"REACH") entered into force.
MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The
connector is equipped with a notch intended for use with the latching
cordset. The cord latching system prevents against accidental removal of
the cordset.
Dimensions [mm]
Countersunk mounting holes, 40 mm distance, quick connect and solder terminals
22.5
ø 3.2
40
27.3
E50 5
s= 40
27
+0.20
- 0
19.5
19.3
+0.20
- 0
max. R 4
R 7
ø 3.5/M3
2
E: Quick-connect terminals 4.8x0.8 mm: 25.3 mm
E: Quick-connect terminals 6.3x0.8 mm: 26.3 mm
E: Solder terminals short: 21.1 mm
E: Solder terminals long: 24.5 mm
3
Connectors (Inlets/Outlets) 6061
https://www.schurter.com /PG07
Connectors
V-Lock version, countersunk mounting holes, 40 mm distance, quick connect and solder terminals
23
ø 3.2
40
27.6
E50 6
s= 40
27.3
+0.20
- 0
19.9
19.7
+0.20
- 0
max. R 3
R 5
ø 3.5/M3
3
V-Lock
E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm
E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm
E: Solder terminals short: 19.6 mm
E: Solder terminals long: 23.0 mm
Through hole mounting holes, 40 mm distance, quick connect and solder terminals
22.5
ø 3.2
40
27.3
E50 5
s= 40
27
+0.20
- 0
19.5
19.3
+0.20
- 0
max. R 4
R 6
ø 3.5/M3
2
E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm
E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm
E: Solder terminals short: 21.9 mm
E: Solder terminals long: 25.3 mm
4
Connectors (Inlets/Outlets)
6061 https://www.schurter.com /PG07
Connectors
Countersunk mounting holes, 36 mm distance, quick connect and solder terminals
22.5
ø 3.2
36
27.3
E48 5
s= 36
27
+0.20
- 0
19.5
19.3
+0.20
- 0
max. R 4
R 6
ø 3.5/M3
2
E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm
E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm
E: Solder terminals short: 21.9 mm
E: Solder terminals long: 25.3 mm
Countersunk mounting holes, 40 mm distance, screw terminals
23
ø 3.2
40
27.3
20.350 5
s= 40
27
+0.20
- 0
19.3
19
+0.20
- 0
max. R 4
R 7
ø 3.5/M3
2
5
Connectors (Inlets/Outlets) 6061
https://www.schurter.com /PG07
Connectors
Protection class II, countersunk mounting holes, 40 mm distance, quick connect and solder terminals
23
ø 3.2
40
27.6
E50 6
s= 40
27.3
+0.20
- 0
19.9
19.7
+0.20
- 0
max. R 3
R 5
ø 3.5/M3
3
V-Lock
E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm
E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm
E: Solder terminals short: 19.3 mm
E: Solder terminals long: 23.0 mm
Config. Code
6061|-|H|-|A|B|C|0-|D|-|E|G|O|
The characters are placeholders for the correspondingly keys of selections from the key tables.
6061|-| H |-|A|B|C|0-|D|-|E|G|O| = Type
Type Configuration
key
protection class II B
protection class I X
Protection class II only with V-Lock
6061|-|H|-| A |B|C|0-|D|-|E|G|O| = Terminals
Terminal L Configuration
key
short solder terminal (L = 4.8 mm)
2
long solder terminal (L = 8.5 mm)
3
Blade terminal (4.8 x 0.8 mm)
8
Blade terminal (6.3 x 0.8 mm)
9
screw terminal A
6061|-|H|-|A| B |C|0-|D|-|E|G|O| = Terminals
Terminal N Configuration
key
short solder terminal (L = 4.8 mm) 2
long solder terminal (L = 8.5 mm) 3
Blade terminal (4.8 x 0.8 mm) 8
Blade terminal (6.3 x 0.8 mm) 9
screw terminal A
Symbols similar as in table A
6061|-|H|-|A|B| C |0-|D|-|E|G|O| = Terminals
Terminal Ground Configuration
key
without terminal 0
short solder terminal (L = 4.8 mm) 2
long solder terminal (L = 8.5 mm) 3
Blade terminal (4.8 x 0.8 mm) 8
Blade terminal (6.3 x 0.8 mm) 9
screw terminal A
Symbols similar as in table A
6
Connectors (Inlets/Outlets)
6061 https://www.schurter.com /PG07
Connectors
6061|-|H|-|A|B|C|0-| D |-|E|G|O| = Color
Color Configuration
key
Black A
Grey B
White D
6061|-|H|-|A|B|C|0-|D|-| E |G|O| = Style
Style Configuration
key
flange with countersunk holes 1
flange with through holes 2
6061|-|H|-|A|B|C|0-|D|-|E| G |O| = DimensionS
Dimension "S" Configuration
key
36
40
The dimension "S" is displayed in (1/10 mm). This information is also valid for the
order code
6061|-|H|-|A|B|C|0-|D|-|E|G| O | = Features
Features Configuration
key
without V-Lock
V-Lock V
V-Lock only with Dimension "X" = 40
All Variants
Config. Code Description Order Number
6061-X-2220-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal
(L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36,
features:
6162.0045
6061-X-2220-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal
(L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40,
features:
6162.0046
█
6061-X-2220-A-240 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L =
4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with through holes, dimension S: 40, features:
6162.0047
6061-X-2220-B-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L =
4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features:
6162.0048
6061-X-3330-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L
= 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Black, design: flange with countersunk holes, dimension S: 36,
features:
6162.0049
6061-X-3330-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L
= 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Black, design: flange with countersunk holes, dimension S: 40,
features:
6162.0050
6061-X-3330-B-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L =
8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features:
6162.0052
6061-X-8880-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm),
ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features:
6162.0054
6061-X-8880-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm),
ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features:
6162.0055
6061-X-9990-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm),
ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features:
6162.0057 █
6061-X-9990-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm),
ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features:
6162.0058 █
6061-X-9990-B-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm),
ground: Blade terminal (6.3 x 0.8 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features:
6162.0059
6061-X-AAA0-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: screw terminal, N: screw terminal, ground: screw terminal, co-
lor: Black, design: flange with countersunk holes, dimension S: 40, features:
6162.0061 █
6061-X-2220-A-140V 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal
(L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40,
features: V-Lock
6162.0157
6061-X-8880-A-140V 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm),
ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock
6162.0158
6061-X-9990-A-140V 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm),
ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock
6162.0159 █
6061-B-9900-A-140V 6061, IEC Appliance Inlet C18, 70°C, version: protection class II, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8
mm), ground: without terminal, color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock
6162.0175
The listet variants should be available from stock Other versions on request www.schurter.com/contact
█ Most Popular.
Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER
7
Connectors (Inlets/Outlets) 6061
https://www.schurter.com /PG07
Connectors
Packaging unit 50 Pcs
Accessories
Description
Assorted Covers
Rear Cover
Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091
Appliance Outlet further types to 6061
Connector Overview complete
4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782
4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022
4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785
4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06
4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012
Connector further types to 6061 ...
Mating Outlets/Connectors shuttered
Power Cord Overview complete
VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS
Power cord with IEC connector C17, V-Lock, straight VAC17KS
Power Cord further types to 6061
The specifications, descriptions and illustrations indicated in this document are based on current
information. All content is subject to modifications and amendments. Information furnished is believed
to be accurate and reliable. However, users should independently evaluate the suitability and test each
product selected for their own applications.
29.11.2017
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Schurter:
6162.0045 6162.0046 6162.0047 6162.0048 6162.0049 6162.0051 6162.0052 6162.0053 6162.0054 6162.0055
6162.0056 6162.0057 6162.0058 6162.0059 6162.0061 6162.0062 6162.0158 6162.0159 6162.005 6162.006
6162.0060 6162.0050 6162.0157
