(R) (R) Table of Contents General Production Program.......................................................................................................page 3 Main Characteristics and Types .............................................................................................................3 Series and Types......................................................................................................................................4 LEMO's Push-Pull Self-Latching Connection System ..........................................................................5 Single contact and Multicontact Connectors Production Program ....................................................5 Series and Contact configuration...........................................................................................................6 Introduction ..............................................................................................................................................7 General Characteristics...................... Selection of watertight connectors .............................................................................................................8 IP68 watertight assembly, Definition of degree of protection (IP code) .....................................................8 Selection of contact types (solder, crimp, printed circuit) ...........................................................................9 Series specification by cable diameter .....................................................................................................10 Part Numbering System ...........................................................................................................................11 B Series ...................................................... Interconnections .......................................................................................................................................15 Model Description ....................................................................................................................................16 Part Section Showing Internal Components ................................................................................................17 Technical Characteristics ..........................................................................................................................17 Available Models (series and type) ..........................................................................................................17 Alignment Key and Polarized Keying System ..........................................................................................18 Part Number Example ..............................................................................................................................19 Models - Series ........................................................................................................................................20 K Series ...................................................... Interconnections .......................................................................................................................................41 Model Description, Part Section Showing Internal Components ................................................................42 Technical Characteristics ..........................................................................................................................42 Available Models (series and type) ..........................................................................................................43 Alignment Key and Polarized Keying System ..........................................................................................43 Part Number Example ..............................................................................................................................44 Models - Series ........................................................................................................................................45 Type (B and K series) ...........................................................................................................................55 Housings, Insulators, Contacts (B and K series) ..................................................................................60 Collets (B and K series) ........................................................................................................................61 Variant (B and K series)........................................................................................................................66 S Series ...................................................... Interconnections .......................................................................................................................................69 Model Description, Part Section Showing Internal Components ................................................................70 Technical Characteristics ..........................................................................................................................70 Available Models (series and type) ..........................................................................................................71 Part Number Example ..............................................................................................................................72 Models - Series ........................................................................................................................................73 E Series ...................................................... Interconnections .......................................................................................................................................91 Model Description ....................................................................................................................................91 Part Section Showing Internal Components ................................................................................................92 Technical Characteristics ..........................................................................................................................92 Available Models (series and type) ..........................................................................................................92 Part Number Example ..............................................................................................................................93 Models - Series ........................................................................................................................................94 Type (S and E series) .........................................................................................................................103 Housings, Insulators, Contacts (S and E series) ................................................................................111 Contact configuration for RMA, RAD and SWH fixed couplers...........................................................112 Collets (S and E series) ......................................................................................................................113 Variant (S and E series)......................................................................................................................124 F Series....................................................... Interconnections, Model Description and Part Section Showing Internal Components ..........................127 Technical Characteristics ........................................................................................................................128 Available Models (series and type) ........................................................................................................128 Polarized Keying System .......................................................................................................................128 Part Number Example ............................................................................................................................129 Models - Series ......................................................................................................................................130 Type .......................................................................................................................................................133 Accessories ............................................................................................................................................134 Tooling ...................................................................................................................................................136 Panel cut-outs ........................................................................................................................................138 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 1 (R) (R) Table of Contents 2C Series.................................................... Interconnections, Model Description and Part Section Showing Internal Components ..........................143 Technical Characteristics ........................................................................................................................143 Part Number Example ............................................................................................................................144 Models - Series ......................................................................................................................................145 Type, Housings, Contact ........................................................................................................................148 Collets, Variant .......................................................................................................................................149 Accessories and Tooling ........................................................................................................................149 Panel cut-outs ........................................................................................................................................150 2G Series ................................................... Interconnections, Model Description and Part Section Showing Internal Components ..........................151 Technical Characteristics ........................................................................................................................151 Part Number Example ............................................................................................................................152 Models - Series ......................................................................................................................................153 Type, Housings, Contact ........................................................................................................................154 Collets, Accessories ...............................................................................................................................155 Tooling, Panel cut-outs ..........................................................................................................................156 1D Series.................................................... Interconnections, Model Description and Part Section Showing Internal Components ..........................159 Technical Characteristics ........................................................................................................................159 Part Number Example ............................................................................................................................160 Models - Series ......................................................................................................................................161 Type, Collets, Variant .............................................................................................................................163 Accessories and Tooling ........................................................................................................................164 Panel cut-outs ........................................................................................................................................164 Patch Panels ............................................ Patch Panel for audio application...........................................................................................................165 Accessories.............................................. Insulators for crimp contacts ..................................................................................................................169 Crimp contacts .......................................................................................................................................170 Caps .......................................................................................................................................................171 Bend relief ..............................................................................................................................................175 Insulating washers and double panel washers ......................................................................................178 Locking washers, tapered washers and nuts .........................................................................................179 Grounding lug and lead-through with cable collet ..................................................................................181 Tooling ........................................................ Wrenches ...............................................................................................................................................183 Assembly tools, pliers for assembling plugs, taps..................................................................................185 Manual and pneumatic crimping tools, positioners ................................................................................186 Extraction tools.......................................................................................................................................188 Panel Cut-Outs........................................ B and S series ........................................................................................................................................189 K and E series ........................................................................................................................................190 PCB Drilling Pattern ............................. Fixed receptacle with straight printed circuit contact (B and K series) ...................................................191 Length of straight printed circuit contacts (B and K series) ....................................................................192 Fixed receptacle for printed circuit (B series) .........................................................................................193 Fixed receptacle with elbow printed circuit contact (B and K series) .....................................................193 Elbow receptacle (90) for printed circuit (B series) ...............................................................................194 Fixed receptacle with straight printed circuit contact (S and E series) ...................................................194 Length of straight printed circuit contacts (S and E series) ....................................................................195 Elbow receptacle (90) for printed circuit (S series) ...............................................................................195 Fixed receptacle with elbow printed circuit contact (S and E series) .....................................................196 Technical Characteristics.................. Outer shell ..............................................................................................................................................197 Insulator .................................................................................................................................................201 Electrical contact ....................................................................................................................................202 Test voltage, rated current .....................................................................................................................204 Cable fixing ............................................................................................................................................205 Maximum collet nut tightening torque ....................................................................................................208 Technical tables .....................................................................................................................................209 2 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) General Production Program Connectors Patch Panels Single contact from 2 to 150 Amps Coaxial 50 and 75 Coaxial 50 (NIM-CAMAC) Coaxial 50 for frequency 12 GHz Multicoaxial 50 and 75 Multicontact from 2 to 106 contacts High Voltage 3, 5, 8, 10, 15, 30 and 50 kV cc Multi High Voltage 3, 5, and 10 kV cc Triaxial 50 and 75 Quadrax Mixed: High Voltage (HV) + Low Voltage (LV) Mixed: Coax + LV Mixed: Triax + LV Thermocouple Multithermocouple Fiber optic singlemode Fiber optic multimode Mixed: fiber optic + LV Mixed: fiber optic + coax + LV Fiber optic singlemode OPTABALL(R) Fluidic Multifluidic Mixed: fluidic + LV Subminiature Miniature Plastic Printed circuit board Remote handling Watertight Sealed (pressure and/or vacuum) With plastic outer shell With aluminium outer shell With stainless steel outer shell With special radiation resistant insulator material With screw thread coupling for very high pressure With microswitch Patch Panels For video HDTV applications: 3 coax 75 + 2LV For fiber optic applications Adaptors For BNC, C, UHF, N, CINCH, GEN-RADIO connectors For TNC, SMA connectors Accessories Insulator for crimp contacts Crimp contacts Coaxial contacts Triaxial contacts Fiber optic contacts Fiber optic ferrules Caps and bend relief Insulating washers Double plastic panel washers Locking washers Tapered washers Hexagonal nuts Conical nuts Round nuts Notched nuts Grounding washers Lead-through with cable collet For audio-mono applications: triax For audio-mono applications: 3 contacts For audio-stereo applications: quadrax For audio-stereo applications: 6 contacts For video applications: coax 75 Tooling On request Filtered connectors Connectors with special alloy housing Mixed special connectors Assembly onto cable Wrenches Wrenches for assembling plug Assembly tool Pliers Tap Crimping tools Positioners Crimping dies Extractors Insertion testing tool for crimp contacts Fiber optic termination workstation Fiber optic polishing tools Connectors, accessories and tools found in this catalog. Main Characteristics and Types Series STANDARD WATERTIGHT KEYED KEYED WATERTIGHT SCREW 01 (Minax) 00 (NIM-CAMAC) 00 (single contact) 05 / R0 0S to 6S 0A / 4A 1D / 2C 1Y-3Y-6Y 0E to 6E 3T 4M 00 (multicontact) 0B to 5B 2G/5G 0K to 5K 0F to 5F 3N to 5N 03 0V to 5V 0W to 5W 2U to 5U Latching Key Push-Pull Stepped insert (Half-Moon) Contact Key (G) or other key-way code Metal or plastic Shell Insert Screw Key (G) or stepped insert (Half-Moon) Metal Hermaphroditic or cylindrical Cylindrical Hermaphroditic or cylindrical Solder or printed circuit Solder, crimp or printed circuit Solder (crimp or printed circuit) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 3 (R) (R) Series and Types Standard 0A Thermocouple Mixed fluidic+LV 3T 00 0B 1B 2B 3B 4B 5B 2G 5G 0K 1K 2K 3K 4K 5K 0F to 5F 3N to 5N 03 0W to 5W 2U to 5U Note: = included in this catalog, = available but not included in this catalog. 4 Multi fluidic Fluidic Mixed FO+LV Multi FO Fiber Optic 4M Screw Mixed Triax+LV 1Y-3Y-6Y 0V 1V 2V 3V 4V 5V Mixed Coax+LV 4A Keyed watertight Mixed HV+LV 2C Keyed Multi Coaxial 1D Watertight Multi HV R0 0E 1E 2E 3E 4E 5E 6E Quadrax Triaxial 75 Triaxial 50 05 0S 1S 2S 3S 4S 5S 6S High Voltage Multicontact 01 00 Coaxial 75 Coaxial 50 Series Single contact Types LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) LEMO's Push-Pull Self-Latching Connection System This self-latching system is renowned worldwide for its easy and quick mating and unmating features. It provides absolute security against vibration, shock or pull on the cable, and facilitates operation in a very limited space. The LEMO self-latching system allows the connector to be mated by simply pushing the plug straight into the receptacle. Once firmly latched, connection cannot be broken by pulling on the cable or any other component part other than the outer release sleeve. When required, the connector is disengaged by a single straight pull on the outer release sleeve. This first disengages the latches and then withdraws the plug from the receptacle. Single contact and Multicontact Connectors Production Program The production program is divided into seven families of connectors. Their main characteristics and features are shown below. Series 00 multicontact 0B to 5B 0K to 5K 00 single contact 0S to 6S Feature Metal or plastic Metal Metal or plastic Metal Keyed Keyed watertight Hermaphroditic insert Watertight hermaphroditic Insulator type Multicontact Multicontact or single contact Contact type Solder, crimp or printed circuit Solder or printed circuit Page 0F to 5F 2C/2G 1D Push-Pull Latching Shell 0E to 6E 13 to 40 41 to 54 67 to 90 91 to 102 Metal Light compact Shortened version Multicontact 4 concentric contacts Quadrax Crimp or printed circuit Solder or printed circuit Solder 125 to 140 141 to 156 157 to 164 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 5 (R) (R) Series and contact configurations Series 2C 00 00 0F 2G 5B/5K 6S/6E 5F 1D Note: = available contact configuration 6 1D 2G 2C 5F 4F 3F 2F 1F 0F 6S-6E 5S-5E 4S-4E 3S-3E 2S-2E 1S-1E 0S-0E 3B-3K 00 2B-2K 5B-5K 1B-1K 4B-4K 0B-0K 1 2 3 4 5 6 7 8 9 10 12 13 14 16 18 19 20 22 24 26 28 30 32 36 40 44 48 50 54 55 60 62 64 66 72 106 00 Number of contacts LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Introduction This catalog gives the complete description of LEMO single contact and multicontact type connectors. Our manufacturing program has been extended to almost 40 series divided into seven product families, each product with specific mating and environmental characteristics. The Watertight Keyed Series Each series includes a wide variety of plug, receptacle, coup-ler and bridge plug models, available in contact configurations adapted to all round cables, including up to 106 conductors, and a maximum diameter of 30 mm. Vacuum-tight models are also available. This product family includes the 0K to 5K series (IEC 60529/IP 68), available in the same types as the 0B to 5B series and the 0F to 5F series (IP 67), specially designed for applications requiring minimum weight, small size and splash-proofness. Since LEMO connectors are perfectly screened and designed to guarantee very low resistance to shell electrical continuity, they are particularly adapted to applications where electromagnetic compatibility (EMC) is important. Patch Panels A large number of accessories, as well as tooling for cable assembly, are available. The Standard Series The characteristic feature of these connector series is the hermaphroditic insulator in the multicontact version. They include principally the 0S and 6S series, as well as the 00 single contact series. The following series, explained in a separate chapter, also belong to this group: The 1D quadrax type, with four concentric contacts used for audio-stereo applications; and The 2C multicontact type, shortened version of connector for space saving. These connector series combine the characteristics of The Watertight Series and the technical features of the keyed series. LEMO patch panels have been specifically developed to meet the requirements of radio and television broadcasting companies to facilitate the switching of large numbers of audio mono signals (0B series multicontact three contacts) or audio stereo (1B series multicontact six contacts and 1D series quadrax type) on 19'' panels. On the front side connection is made either by LEMO bridge plugs with or without a monitoring output. On the rear side connection onto the panel is either by plugs specific to the existing system or permanent cable assemblies. UL Recognition (R) Many of our connectors are recognized by the Underwriters Laboratories (UL). This recognition is the result of tests carried out on products (product standards) according to the safety hazards for human life and property. The Watertight Series Our products are tested principally for certain properties with regard to flammability and toxicity. These series are watertight (IEC 60529/IP 68) when mated and assembled to an appropriate cable. They include the 0E to 6E series and are available in the same types as the S series. This marking is only used for components incorporated in a complete product or equipment. The approval of the complete equipment is easier if the component bears the Recognized Component Mark. The Keyed Series The listed connectors are subject to a follow-up procedure carried out under the responsibility of UL. The Follow-up is carried out by sampling. Compared to previous series, keyed connectors offer a variety of new features: - alignment key preventing all errors in alignment; - polarized keying system, the various keying alternatives preventing unwanted cross mating of otherwise similar connectors; - higher contact density; and - possible use of crimp contacts to reduce cable assembly time. These connector series, also including some vacuumtight models, range from 0B to 5B. The 00 multicontact and 2G (shortened version of the 2B series) for space saving also belong to these series. (R) The recognition and the follow-up apply to the insulator raw material (PEEK) as much as the actual connectors. CE marking CE marking means that the appliance or equipment bearing it complies with the protection requirements of one or several European safety directives. CE marking applies to complete products or equipment, but not to electromechanical components, such as connectors. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 7 (R) (R) General Characteristics Selection of watertight connectors For the selection of watertight connector series or watertight (or vacuum-tight) receptacle models, the conditions and the environment specific to the application should be carefully considered. Two typical situations may occur: A) Connectors are either used for outdoor applications or in an environment exposed to splashing water. The selected series must be watertight when mated. The K or E series should be selected. For example an FGG plug and an EGG receptacle of the K series or an FFA plug and an ERA receptacle of the E series. B) The inside of the container is under vacuum or filled with pressurized gas. No leakage is allowed between the outside and the inside of this container. A watertight or vacuum-tight receptacle should be selected, depending on the requirements. To give you an example: an FGG plug and a HGG receptacle of the B series or an FFA plug and a HGP receptacle of the S series. Watertight receptacles are guaranteed to IP 68 protection index. They allow the device on which they are fitted to reach the specified protection index. Measurements are carried out unmated without electrical power. Vacuum-tight receptacles are assembled according to a special assembly procedure and are fully tested with a helium leakage detector. A and B situations may be simultaneously present. In this case, an FGG plug and an HGG receptacle of the K series or an FFA plug and an HGP receptacle of the E series should be selected. A B epoxy resin seal FGG plug B series HGG receptacle B series FGG plug K series EGG receptacle K series IP 68 watertight cable assembly All K and E series models with cable collet can be made watertight to IP 68 protection index for applications requiring up to 10 bars if assembled onto appropriate cable. Please consult us for instructions. Definition of degree of protection (IP code) IEC 60529 outlines an international classification system for the sealing effectiveness of enclosures of electrical equipment against the intrusion into the equipment of foreign bodies (i.e., tools, dust, fingers) and moisture. This classification system utilizes the letters IP (Ingress Protection) followed by two digits. Example: IP 64 = IP Degree of protection - First digit Degree of protection - Second digit The first digit of the IP code indicates the degree that persons are protected against contact with moving parts and the degree that equipment is protected against solid foreign bodies intruding into an enclosure. Second digit indicates the degree of protection of the equipment inside the enclosure against the harmful entry of various forms of moisture (e.g. dripping, spraying, submersion, etc.) 0 No special protection 1 Protection from a large part of the body such as hand or from solid objects greater than 50 mm in diameter 2 Protection against objects not greater than 80 mm in length and 12 mm in diameter 3 Protection from entry by tools, wires, etc., with a diameter or thickness greater than 2.5 mm 4 Protection from entry by solid objects with a diameter or thickness greater than 1.0 mm 5 Protection from the amount of dust that would interfere with the operation of the equipment 6 Dust-tight 0 1 2 3 4 5 6 8 6 4 IP letter code 1st digit 2nd digit No special protection Protection from vertically dripping water Protection from dripping water when tilted up to 15 Protection from sprayed water Protection from splashed water Protection from water projected from a nozzle Protection against heavy seas, or powerful jets of water 7 Protection against temporary immersion 8 Protection against complete continuous submersion in water LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Selection of contact types Solder contacts Contact The conductor bucket of these contacts is machined at an angle to form a cup into which the solder can flow. oA oC oA oC Note: 1) For S, E, 2C, 2G and 1D series 2) For 00 multicontact series 3) For a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor diameter is smaller than o C. Conductor oA (mm) oC (mm) 0.52) 0.5 0.71) 0.7 0.9 1.3 1.6 2.0 3.0 4.0 5.0 6.0 8.0 12.0 0.402) 0.45 0.601) 0.80 0.80 1.00 1.40 1.80 2.70 3.70 5.20 5.20 7.00 6.20 Solid Stranded AWG max. Section max (mm2) 28 28 24 22 22 20 16 14 10 10 - - - - 0.09 0.09 0.25 0.34 0.34 0.50 1.00 1.50 4.00 6.00 - - - - AWG max. Section max (mm2) 30 28 26 223) 223) 203) 18 16 12 10 8 8 4 6 0.05 0.09 0.14 0.34 0.34 0.50 1.00 1.50 4.00 6.00 10.00 10.00 16.00 16.00 Crimp contacts The crimp contacts are designed to be crimped with the standard four-indent method according to MIL-C-22520F, class 1, type 1. Fig. 1 oA Contacts are provided in two forms: with a standard crimp barrel for large conductors (see fig. 1), or with a reduced crimp barrel for smaller conductors (see fig. 2). Contact oC o A o C Form (mm) (mm) per fig. 0.5 oA oC 0.7 Fig. 2 oA oC oA oC 0.9 1.3 1.6 2.0 Note: 1) For a given AWG, the diameter of some stranded conductor designs is larger than the solder cup diameter. Make sure that the maximum conductor diameter is smaller than o C. A detailed range of conductor dimensions that can be crimped into our contacts is given on the table at right. See also the section on tooling (pages 183 to 188). 3.0 4.0 0.45 0.80 0.45 1.10 0.80 0.45 1.40 1.10 0.80 1.90 1.40 2.40 1.90 2.90 4.00 1 1 2 1 2 2 1 2 2 1 2 1 2 1 1 Conductor stranded AWG stranded Section (mm2) min. max. min. max. 32 26 32 24 26 32 20 24 26 18 22 16 18 14 12 28 221) 28 20 221) 28 18 20 221) 141) 18 121) 14 101) 10 0.035 0.140 0.035 0.250 0.140 0.035 0.500 0.250 0.140 1.000 0.340 1.500 1.000 2.500 4.000 0.09 0.34 0.09 0.50 0.34 0.09 1.00 0.50 0.34 1.50 1.00 2.50 1.50 4.00 6.00 Fr (N) 12 22 30 40 50 65 75 90 Note: Fr = mean contact retention force in the insulator (according to IEC 60512-8 test 15a). Printed circuit contacts Printed circuit contacts are available in straight or elbow versions for certain connector types. Connection is possible by soldering on flexible or rigid printed circuit boards. Straight printed circuit contacts are gold-plated which guastraight rantees optimum soldering, even after longterm storage. Printed circuit elbow contacts include a tinned copper wire crimped into a contact. L dimensions and C o are detailed in the section on PCB drilling patterns. elbow oA oC oA L oA L oC L oC LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 9 (R) (R) Series specification by cable diameter Series C type collet min. max. D type collet min. max. Cable diameter range (mm) K type collet L type collet min. max. min. max. M type collet min. max. With heatshrink boot min. max. 001) 0B 1B 2B 3B 4B 5B - - - - - - - - - - - - - - 1.1 1.5 3.1 4.1 5.1 9.1 9.6 3.4 5.5 7.5 9.7 11.7 16.0 25.0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2.2 1.5 4.1 5.1 - - - 3.0 4.0 5.0 9.0 - - - - - - - - - - - - - - - 0K 1K 2K 3K 4K 5K 1.0 1.3 1.3 2.6 4.8 9.6 5.0 6.5 8.5 10.5 15.0 23.5 - - - - - - - - - - - - - 6.6 8.6 10.6 15.6 - - 8.5 11.0 15.0 23.5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 002) 0S 1S 2S 3S 4S 5S 6S 1.1 1.3 1.3 1.3 2.5 4.1 6.1 11.1 3.0 4.3 6.7 8.5 10.5 13.0 22.0 30.0 - - - - - - - - - - - - - - - - 3.0 3.8 6.1 8.1 11.1 13.1 22.1 - 4.1 6.7 8.5 10.5 13.0 22.0 30.0 - 1.3 1.3 1.3 1.7 3.1 4.1 8.1 11.1 3.0 4.3 6.5 8.5 10.5 13.0 21.0 30.0 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0E 1E 2E 3E 4E 5E 6E 1.0 1.3 1.3 2.6 4.8 9.6 13.0 5.0 6.5 8.5 10.5 15.0 23.5 30.0 - - - - - - - - - - - - - - - 6.6 8.6 10.6 15.6 - - - 8.5 11.0 15.0 23.5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 0F 1F 2F 3F 4F 5F - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3.8 3.8 3.8 3.8 5.3 7.4 11 13 16 18 25 34 2C 2G 2.2 - 7.9 - - 4.5 - 7.9 - - - - 0.8 - 8.1 - - - - - - - - - 1D - - 3.1 7.5 - - - - - - - - Note: 1) For multicontact only 2) For single contact only; crimping (type E) is also available for cables from 1.8 to 3.0 mm. 10 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Part Numbering System Series Connectors series can be selected according to environmental requirements or the particular characteristics of each application, such as indoor or outdoor applications, etc. @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ See table on p. 5 (single contact and multicontact connectors production progr.) and p. 8 (selection of watertight connectors). @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ The size of the series can be defined by the number of conductors, the conductor diameter and the cable jacket diameter. B 2 B B series 2B series See table on p. 6 (series and contact configurations) and p. 10 (acceptable cable diameters). Type Contact arrangements (type) within a given size can be defined according to the cable design (single contact or multicontact) and the required electrical characteristics (rated current). @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ Models within a given series can be selected according to the application and the panel mounting conditions. See models available in each series. When available make the right key-way selection. Housing material The housing material and surface finish depends on the environmental requirements. See material available in each series. Insulator material @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ = contact diameter multicontact 3 = number of contacts @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ F plug E receptacle @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ ?@@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ chrome-plated brass @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ PEEK (multicontact) L PTFE (single contact) T @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ A male to solder L female to solder @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ = collet diameter Several variants are available according to special requirements of the application (bend relief backnut, etc.). @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Different clamping systems are proposed in various diameters for screened or unscreened cables. D @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ nut for fitting a bend relief See variant in each series. = Application @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ The contact type can be selected according to the model (male or female), conductor retention (solder or crimp) or the application (straight or elbow printed circuit). = Environment @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ See collets type of each series and p. 10 (acceptable cable diameter). Not applicable for receptacles E or H Variant @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ 1 The insulator material should be selected according to the insulator type. See contact available in each series. Verify again the contact size matches with the conductor diameter. Collet @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ single contact C See material available in each series. Contact @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ See type tables in each series. Model @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ Z @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@g ?@@ @@@@@@@@ ?@@@@@@@@ @@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@ ?@@@@@@@@ = Cable LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 11 (R) 12 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com K SERIES (watertight) B SERIES (R) 14 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) B Series B series connectors provide the following main features: - security of the Push-Pull self-latching system - multicontact types 2 to 64 contacts - solder, crimp or printed circuit contacts (straight or elbow) - keying system (G key standard) for connector alignment - multiple key options to avoid cross mating of similar connectors - high packing density for space savings - 360 screening for full EMC shielding. Interconnections Fixed plugs Straight plugs Fixed receptacles Fixed receptacles FWG FGG EGG ECG PKG FBG FGG ENG ECG PFG FAG FCG EKG EZG PEG Elbow plugs Fixed coupler FFG ESG EYG FNG EHG XPF FHG R** Elbow receptacles FMG FEG Fixed receptacles with microswitch EJG EPG EMG FDG EBG 2 1 FKG 3 EXG EMG FYG EEG XBG FZG EFG Free receptacles FIG ECG PHG Plastic housing models Straight plugs Fixed receptacles PHG PNG FGG ENG Plug with two parallel receptacles Bridge plugs FGY ENY FTG FGY CFF, CRG LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 15 (R) (R) Interconnections Threaded-fixing models Watertight or vacuum-tight models Fixed plug Fixed coupler Fixed receptacles HGG HHG Straight plugs FVG HEG Fixed receptacle ESG Elbow receptacle YHG S** HNG HCG HMG FVB XRB Model Description CFF Bridge plug with two non-latching plugs CRG Bridge plug with two non-latching plugs, and monitoring receptacle and key (G) or keys (A...M) EBG Fixed receptacle, nut fixing, round flange, key (G) or keys (A...L and R), screw fixing (back panel mounting) ECG Fixed receptacle with two nuts, key (G) or keys (A...M and R) (back panel mounting) ECG Fixed receptacle with two nuts, key (G) or keys (A...F and R) and straight contact for printed circuit (back panel mounting) ECG Fixed receptacle with two nuts, key (G) or keys (A...F) with elbow (90) contact for printed circuit (back panel mounting) EEG Fixed receptacle, nut fixing, key (G) or keys (A...M and R) (back panel mounting) EFG Fixed receptacle, nut fixing, key (G) or keys (A...M), with two flats on the shell and O-ring (back panel mounting) EGG Fixed receptacle, nut fixing, key (G) or keys (A...M and R) EHG Fixed receptacle, nut fixing, key (G) or keys (A...M and R), and protruding shell EJG Fixed receptacle, press or adhesive fit, key (G) or keys (A...M) EKG Fixed receptacle, nut fixing, key (G) or keys (A...L and R), special alignment mark on the front EMG Fixed receptacle, nut fixing, microswitch, key (G) or keys (A...L) EMG Fixed receptacle, with two nuts, microswitch, key (G) or keys (A...L) ENG Fixed receptacle with grounding tab, nut fixing, with key (G) or keys (A...M) ENG Fixed receptacle with grounding tab, nut fixing, key (G or J), PEEK outer shell ENY Fixed receptacle with grounding tab, nut fixing, keys (Y), PSU or PPSU outer shell EPG Elbow (90) receptacle for printed circuit, key (G) or keys (A...F) (solder or screw fixing) ESG Fixed receptacle with two round nuts, key (G) or keys (A...L), long threaded shell (back panel mounting) EXG Elbow (90) receptacle for printed circuit with two nuts, key (G) or keys (A...F) (solder or screw fixing) EYG Fixed receptacle for printed circuit, nut fixing, key (G) or keys (A...F) (back panel mounting) EZG Straight receptacle for printed circuit, key (G) or keys (A...F) 16 FAG Fixed plug, non-latching, nut fixing, key (G) or keys (A...M and R) FBG Fixed plug, nut fixing, round flange, key (G) or keys (A...L and R), screw fixing FCG Straight plug, key (G) or keys (A...L and R), cable collet and safety locking ring FDG Straight plug, long version, key (G) or keys (A...L), cable collet FEG Straight plug, key (G) or keys (A...L), cable collet, front seal and nut for fitting a bend relief FFG Straight plug, non-latching, key (G) or keys (A...M), cable collet FGG Straight plug, key (G) or keys (A...M and R), cable collet FGG Straight plug, key (G) or keys (A...M), cable collet and nut for fitting a bend relief FGG Straight plug, key (G or J), cable collet, PEEK outer shell FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell and nut for fitting a bend relief FHG Elbow (90) plug, key (G) or keys (A...M and R), cable collet FIG Straight plug for remote handling, key (G) or keys (A...L and R), special alignment mark, knurled handling surface, cable collet FKG Elbow (90) plug for remote handling, key (G) or keys (A...L), special alignment mark, knurled handling surface, cable collet FMG Elbow (90) plug, key (G) or keys (A...M), cable collet and lanyard release FNG Straight plug, key (G) or keys (A...M and R), cable collet and lanyard release FTG Straight plug, key (G) and two parallel receptacles FYG Straight plug, conical shell, key (G) or keys (A...M), cable collet FVB Straight plug, keys (B), threaded-fixing for special cable crimping FVG Straight plug, key (G) or keys (A, B), cable collet, threaded-fixing FWG Fixed plug, nut fixing, key (G) or keys (A...L) FZG Straight plug for remote handling, key (G) or keys (A...L and R), cable collet HCG Fixed receptacle, nut fixing, key (G) or keys (A...M), watertight or vacuum-tight (back panel mounting) HEG Fixed receptacle, nut fixing, key (G) or keys (A...M), or vacuum-tight (back panel mounting) HGG Fixed receptacle, nut fixing, key (G) or keys (A...M and R), watertight or vacuum-tight HHG Fixed receptacle, nut fixing, key (G) or keys (A...M), watertight or vacuum-tight HMG Fixed receptacle with grounding tab, nut fixing, key (G) or keys (A...M), watertight or vacuum-tight (back panel mounting) HNG Fixed receptacle, nut fixing, with grounding tab, key (G) or keys (A...M), watertight or vacuum-tight PEG Fixed receptacle, nut fixing, key (G) or keys (A...L), cable collet (back panel mounting) PFG Fixed receptacle, with two nuts, key (G) or keys (A...M and R), cable collet (back panel mounting) PHG Free receptacle, key (G) or keys (A...M and R), cable collet PHG Free receptacle, key (G) or keys (A...M), cable collet and nut for fitting a bend relief PKG Fixed receptacle, nut fixing, key (G) or keys (A...M and R), cable collet PNG Free receptacle, nut fixing, key (G) or keys (A...L and R), cable collet with lanyard release R Fixed coupler, nut fixing, key (G) or keys (A and J) at the flange end and keys (J, K or M) at the other end S Fixed coupler, nut fixing, key (G) or keys (A, B, J, K and L) at the flange end and key (G) or keys (A, B, J, K and L) at the other end, watertight or vacuum-tight XBG Elbow (90) receptacle fixing nut for printed circuit, key (G) or keys (A, B) (back panel mounting) XPF Fixed receptacle, nut fixing, long shell, keys (F) for printed circuit (back panel mounting) XRB Elbow (90) receptacle fixing nut for printed circuit, keys (B), short shell, threaded-fixing (back panel mounting) YHG Fixed plug, nut fixing, non-latching, key (G) or keys (A...M) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Part Section Showing Internal Components Straight plug Fixed receptacle 6 7 1 2 3 4 5 6 7 2 3 4 1 1 5 6 5 4 2 7 3 outer shell groundind crown retaining ring hexagonal nut locking washer insulator female contact 1 2 3 4 5 6 7 outer shell latch sleeve collet nut split insert carrier insulator male contact collet Technical Characteristics Mechanical and Climatic Electrical Characteristics Value Standard Characteristics > 5000 cycles IEC 60512-5 test 9a up 95% to 140 F -67 F, +482 F 10-2000 Hz, 15 g IEC 60512-4 test 6d 100 g, 6 ms IEC 60512-4 test 6c > 144h IEC 60512-6 test 11f IP50 IEC 60529 55/175/21 IEC 60068-1 Endurance Humidity Temperature range1) Resistance to vibration Shock resistance Salt spray corrosion test Protection index (mated) Climatic category1) Value at 10 MHz at 1 GHz Shielding efficiency Standard > 75 dB > 40 dB IEC 60169-1-3 IEC 60169-1-3 Note: The various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 197. 1) For watertight or vacuum-tight models see page 37. Available Models (series and types) Model CFF CRG EBG ECG ECG 2) EEG EFG EGG EHG EJG EKG EMG ENG ENG 3) ENY 4) EPG ESG EXG EYG EZG Multicontact 00 0B 1B 2B 3B 4B 5B Model FAG FBG FCG FDG FEG FFG FGG FGG 5) FGG 3) FGY 4) 6) FGY 4) 5) 6) FHG FIG FKG FMG FNG FTG 1) FVB FVG FWG Multicontact 00 0B 1B 2B 3B 4B 5B Model FYG FZG HCG HEG HGG HHG HMG HNG PEG PFG PHG PHG 5) PKG PNG R S XBG XRB XPF YHG Multicontact 00 0B 1B 2B 3B 4B 5B Note: CFF, CRG, EMG, EPG, EXG and FTG models are not available in all types. Please consult pages corresponding to the models. 1) only available with G key 2) with elbow (90) printed circuit contact 3) with PEEK outer shell 4) only available with Y key 5) with nut for fitting a bend relief 6) with PSU or PPSU outer shell = available models by series and types LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 17 (R) (R) Alignment Key and Polarized Keying System B series connector model part numbers are composed of three letters. The LAST LETTER indicates the key position and the contact type (male or female). For example, straight plugs with G key or A, B, C, D, E, F, R or Y keys, are fitted with male contacts, whereas with J, K, L, M keys, plugs are fitted with female contacts. Y 3 Front view of a receptacle Model 5 - - 00 0B 1B 0 30 60 - - - - 45 - - - - - 0 30 60 90 135 145 155 45 70 80 110 - - 0 30 60 90 135 145 155 45 70 80 - - - 0 30 45 60 95 120 145 37.5 52.5 70 - - 112.5 100 Series 00 0B 1B - - - - - - - - - - - - Contact type Note 2B 3B 0 30 45 60 95 120 145 37.5 52.5 70 - 126 102 4B 5B 0 0 30 30 45 45 60 60 95 95 120 120 145 145 37.5 37.5 52.5 52.5 70 70 - - - - - - Plug Receptacle Coupler 1) male male male male male male male female female female female female female female female female female female male male male male male-female male-female male-female male-female male-female male-female male-female female-male female-male female-male female-male male female - Series 2) Contact type 2B 3B 4B 5B Plug Receptacle Coupler 1) - - - - - - - - - - - - 95 115 20 30 male female male-female Note # of keys Series Angles 1 2 2 2 2 2 2 2 2 2 2 Angles G A B C D E F J K L M Series Angles # of keys Angles Front view of a receptacle Model Receptacles with G key or A, B, C, D, E, F, R or Y keys, are fitted with female contacts; whereas with J, K, L, M keys, receptacles are fitted with male contacts. R Note: FTG, FGY, ENY models are not available with all the keys. Please consult pages corresponding to these models. For R models see explanation on page 32 and for S models see explanation on page 39. 1) The first contact type mentioned is always the one at the flange end. 2) Only FGY and ENY models are available. First choice alternative 18 Special order alternative LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Part Number Example Straight plug with cable collet FGG 1B 306 C L A D 62 Model: (page 20) Series: (page 20) Variant: see note 1) Type: (page 55) Cable o: (page 61) Housing: (page 60) Collet type: (page 61) Insulator: (page 60) Contact: (page 60) FGG.1B.306.CLAD62 = straight plug with key (G) and cable collet, 1B series, multicontact type with 6 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, D type collet for 6.0 mm diameter cable. Fixed receptacle EGG 2B 319 K L M Model: (page 24) Series: (page 24) Variant: see note 1) Type: (page 55) Contact: (page 60) Housing: (page 60) Insulator: (page 60) EGG.2B.319.KLM = fixed receptacle, nut fixing, with key (G), 2B series, multicontact type with 19 contacts, black chromeplated brass outer shell, PEEK insulator, female crimp contacts. Fixed coupler RJG 0B 304 C L A Model: (page 32) Series: (page 32) Variant: see note 1) Type: (page 55) Contact: (page 60) Housing: (page 60) Insulator: (page 60) RJG.0B.304.CLA = straight fixed coupler with keys (J) at the flange end and key (G) at the other end, 0B series, multicontact type with 4 contacts, chrome-plated brass outer shell, PEEK insulator, male-female contacts. Note: 1) The Variant position in the reference is used to specify either the presence of a collet nut for fitting the bend relief, or the anodized color of the housing in aluminium alloy, or the color of the bridge plug housing. For models with collet nut for fitting the bend relief, a Z should be indicated and a bend relief can be ordered separately as indicated in the Accessories section. An order for a connector with bend relief should thus include two part numbers. For the various housings available in colors, the corresponding letter in the part number for the color is indicated on page 66. For the watertight models of receptacle, the letter P is used; for the vacuum-tight models of receptacle the letters PV shall be indicated. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 19 (R) (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Models - Series FGG Straight plug, key (G) or keys (A...M and R), cable collet Reference ~L oA ~M S2 S1 Model Series FGG FGG FGG FGG FGG FGG FGG 001) 0B 1B 2B 3B 4B 5B Dimensions (mm) A L 6.4 28.5 9.5 36.0 12.0 43.0 15.0 50.0 18.0 58.0 25.0 75.0 35.0 103.0 M S1 S2 20.5 26.0 32.0 38.0 43.0 57.0 78.0 5.5 8.0 10.0 13.0 15.0 21.0 31.0 5 7 9 12 14 20 30 Note: 1) The surface design of the 00 series is different. FGG Straight plug, key (G) or keys (A...M), cable collet and nut for fitting a bend relief Reference ~L oA ~M S2 S1 Dimensions (mm) Model Series A L M S1 S2 FGG FGG FGG FGG FGG FGG 001) 0B 1B 2B 3B 4B 6.4 9.5 12.0 15.0 18.0 25.0 27.5 35.0 42.0 48.0 56.5 71.0 18.5 25.0 33.0 36.0 41.5 53.0 5.5 8.0 10.0 13.0 15.0 21.0 5 7 9 12 15 20 Note: 1) The surface design of the 00 series is different. The bend relief must be ordered separately (see page 175). FCG Straight plug, key (G) or keys (A...L and R), cable collet and safety locking ring Reference ~L oA ~M S2 Dimensions (mm) Model Series A L M S1 S2 FCG FCG FCG 1B 4B 5B 12 25 35 43 75 103 32 57 78 10 21 31 9 20 30 S1 FFG Straight plug, non-latching, key (G) or keys (A...M), cable collet Reference ~L oA ~M S2 20 Dimensions (mm) Model Series A L M S1 S2 FFG FFG FFG FFG FFG 0B 1B 2B 3B 4B 9.5 12.0 15.0 18.0 25.0 36 43 49 58 75 26 32 37 43 57 8 10 13 15 21 7 9 12 14 20 S1 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) FNG Straight plug, key (G) or keys (A...M and R), cable collet and lanyard release Reference ~L B N oA ~M Dimensions (mm) Model Series A FNG FNG FNG FNG FNG FNG 0B 1B 2B 3B 4B 5B 9.5 12.0 15.0 18.0 25.0 35.0 B L 19.4 28.5 19.4 43.0 22.6 49.0 25.6 58.0 35.2 75.0 47.0 103.0 M N S1 S2 20.5 32.0 37.0 43.0 57.0 78.0 140 140 160 190 230 300 8 10 13 15 21 31 7 9 12 14 20 30 Note: Cable material: stainless steel with PVC sheath. The outer shell of the FNG.0B model is similar to the FMG.0B model. S2 S1 FEG Straight plug, key (G) or keys (A...L), cable collet, front seal and nut for fitting a bend relief (IP 54 protection index when mated) Reference ~L oA ~M Model Series FEG FEG FEG 1B 2B 3B Dimensions (mm) A L M 13.5 42.0 33.0 16.5 48.0 36.0 19.0 56.5 41.5 S1 S2 10 13 15 9 12 15 Note: The bend relief must be ordered separately (see page 175). S2 S1 FDG Straight plug, long version, key (G) or keys (A...L), cable collet Reference ~L Model Series A L M S1 S2 FDG FDG 1B 2B 12 15 68 79 57 67 10 13 9 12 oA ~M Dimensions (mm) S2 S1 FYG Straight plug, conical shell, key (G) or keys (A...M), cable collet Reference Dimensions (mm) ~L Model Series A L M S1 S2 FYG 0B 15.5 36 26 8 7 oA ~M S2 S1 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 21 (R) (R) FZG Straight plug for remote handling, key (G) or keys (A...L and R), cable collet Reference ~L oA ~M S2 S1 Dimensions (mm) Model Series A L M N S1 S2 S3 FZG FZG FZG FZG 2B 3B 4B 5B 20 22 30 40 49 58 75 103 37 43 57 78 15 18 25 35 13 15 21 31 12 14 20 30 15 18 25 35 S3 N FIG Straight plug for remote handling, key (G) or keys (A...L and R), special alignment mark, knurled handling surface, cable collet ~L Reference ~M S2 S1 S3 Model Series A L M N S1 S2 S3 FIG FIG FIG FIG 2B 3B 4B 5B 20 22 30 40 49 58 75 103 37 43 57 78 17.5 21.5 28.5 41.0 13 15 21 31 12 14 20 30 15 18 25 35 oA N Dimensions (mm) FWG Fixed plug, nut fixing, key (G) or keys (A...L) L maxi N Reference oA M e oB S3 Series FWG FWG 1B 2B A B e E L M N1) S1 Note: 1) Maximum length with crimp contacts FBG Fixed plug, nut fixing, round flange, key (G) or keys (A...L and R), screw fixing L maxi oG M 22 E maxi oA e oB Reference oH S3 18.0 16.0 M12x1.0 3.0 24.9 17 24.8 10.5 14 19.5 19.5 M15x1.0 5.2 28.6 18 27.3 13.5 17 Panel cut-out: P9 S1 E maxi Model Dimensions (mm) Dimensions (mm) Model Series A B e FBG 5B 54 40 M35x1.0 E G H 9 3 47 61.5 44.5 Panel cut-out: P8 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com L M (R) (R) FAG Fixed plug, non-latching, nut fixing, key (G) or keys (A...M and R) Reference L maxi Dimensions (mm) Model Series A B e E L M FAG FAG FAG FAG FAG FAG FAG 00 0B 1B 2B 3B 4B 5B 8 10 14 18 22 28 40 10.3 12.5 16.0 19.5 25.2 32.0 40.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 2.0 3.5 7.0 7.0 8.0 8.0 7.0 16.9 21.1 24.9 28.6 32.1 36.6 47.4 9.0 11.2 12.5 13.8 17.0 20.5 28.0 N1) S1 S3 15.5 19.8 23.3 26.8 30.3 34.8 43.8 9 11 14 17 22 30 - N oA M e oB S3 E maxi S1 6.3 8.2 10.5 13.5 16.5 23.5 33.5 Note: 1) Maximum length with crimp contacts. The 5B series is delivered without locking washer or tapered washer and with a round nut. Panel cut-out: P1 FHG Elbow (90) plug, key (G) or keys (A...M and R), cable collet L S1 Reference ~H oA M S3 S2 D Model Series FHG FHG FHG FHG FHG FHG FHG 001) 0B 1B 2B 3B 4B 5B Dimensions (mm) A D 7.7 5.2 11.0 6.5 13.5 8.0 16.5 9.0 19.0 10.0 26.0 15.0 36.0 21.0 H L M S1 S2 S3 18 23 28 34 37 52 74 24.5 30.0 36.0 41.5 50.0 67.0 90.0 16.5 20.0 25.0 29.5 35.0 49.0 65.0 7 9 11 14 17 22 32 5 7 9 12 14 20 30 5.5 8.0 10.0 13.0 15.0 21.0 31.0 Note: 1) The surface design of the 00 series is different. FMG Elbow (90) plug, key (G) or keys (A...M), cable collet and lanyard release L S1 ~H oA M Reference Dimensions (mm) S3 B N S2 M ~H Series A B H L M N FMG 0B 11 17 26 31.6 21.6 140 S1 S2 S3 10 7 8 Note: Dimension D is the same as for the FHG model. Cable material: stainless steel with PVC sheath. FKG Elbow (90) plug for remote handling, key (G) or keys (A...L), special alignment mark, knurled handling surface, cable collet L S1 Model Reference S4 S3 S2 N Dimensions (mm) Model Series A H L M FKG FKG 3B 4B 25 51 37 52 50 67 35 49 N S1 S2 S3 S4 21.0 17 28.5 22 14 20 15 21 21 28 oA Note: Dimension D is the same as for the FHG model. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 23 (R) (R) EGG Fixed receptacle, nut fixing, key (G) or keys (A...M and R) Reference Dimensions (mm) L maxi Model Series A B e E L M EGG EGG EGG EGG EGG EGG EGG 00 0B 1B 2B 3B 4B 5B 8 10 14 18 22 28 40 10.3 12.5 16.0 19.5 25.0 32.0 40.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 5.5 7.0 7.5 8.5 11.5 12.0 11.0 15.5 20.7 23.0 26.7 30.7 35.7 43.5 1.0 1.2 1.5 1.8 2.0 2.5 3.0 N1) S1 S3 N M oA e oB S3 S1 E maxi 13.7 19.1 21.1 24.6 28.1 32.6 39.6 6.3 8.2 10.5 13.5 16.5 23.5 33.5 9 11 14 17 22 30 - Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. The 5B series is delivered with a tapered washer and a round nut. ENG Fixed receptacle with grounding tab, nut fixing, key (G) or keys (A...M) Reference L maxi N Model Series A B e E L M ENG ENG ENG ENG ENG 0B 1B2) 2B 3B 4B 10 14 18 22 28 12.5 16.0 19.5 25.0 32.0 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 7.0 7.5 8.5 11.5 12.0 20.7 23.0 26.7 30.7 35.7 1.2 1.5 1.8 2.0 2.5 N1) S1 S3 M e oA S3 oB Dimensions (mm) E maxi 19.1 21.1 24.6 28.1 32.6 8.2 10.5 13.5 16.5 23.5 11 14 17 22 30 S1 Panel cut-out: P1 Note: 1) 2) Maximum length with crimp contacts. For the 1B series the grounding tab is on the upper side. EKG Fixed receptacle, nut fixing, key (G) or keys (A...L and R), special alignment mark on the front L maxi Reference N M oA e oB S3 E maxi Dimensions (mm) Model Series A B e E L M EKG EKG EKG EKG 2B 3B 4B 5B 18 22 28 40 19.5 25.0 32.0 40.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 8.5 11.5 12.0 11.0 26.7 30.7 35.7 43.5 1.8 2.0 2.5 3.0 N1) S1 24.6 28.1 32.6 39.6 13.5 16.5 23.5 33.5 S3 17 22 30 - S1 Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. The 5B series is delivered with a tapered washer and a round nut. ESG Fixed receptacle with two round nuts, key (G) or keys (A...L), long threaded shell (back panel mounting) L maxi N 3.2 mini oA e oB M E maxi Reference Model Series ESG ESG 00 1B Dimensions (mm) A B e E L 9.5 9 M7x0.5 4.0 15.5 14.0 14 M12x1.0 8.0 23.0 M N1) S1 2 2 13.7 - 21.1 10.5 S1 Panel cut-out: P1 1B series Panel cut-out: P2 00 series Note: 1) Maximum length with crimp contacts. 24 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) EHG Fixed receptacle, nut fixing, key (G) or keys (A...M and R), and protruding shell Reference L maxi N oA M e oB S3 E maxi S1 Dimensions (mm) Model Series A B e E L M N1) EHG EHG EHG EHG EHG EHG 00 0B 1B 2B 3B 5B 8.8 10.0 14.0 18.0 22.0 40.0 10.3 12.5 16.0 19.5 25.0 40.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M35x1.0 2.0 2.5 4.2 5.2 4.2 2.5 15.5 19.5 21.7 22.7 30.7 43.5 8.5 12.5 12.0 12.5 12.5 28.5 13.7 19.1 20.8 24.3 27.8 40.3 S1 S3 6.3 8.2 10.5 13.5 16.5 33.5 9 11 14 17 22 - Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. The 5B series is delivered without locking washer or tapered washer and with a round nut. EJG Fixed receptacle, press or adhesive fit, key (G) or keys (A...M) L maxi Reference N oA oB M Model Series EJG EJG EJG 0B 1B 2B Dimensions (mm) A B L 9.2 8.35 20.7 12.5 11.20 23.0 16.5 14.00 26.7 M N1) 1.5 1.5 1.5 19.1 21.1 24.6 Panel cut-out: P5 Note: 1) Maximum length with crimp contacts. EBG Fixed receptacle, nut fixing, round flange, key (G) or keys (A...L and R), screw fixing (back panel mounting) Reference L maxi N Dimensions (mm) Model Series A EBG 5B 41 B e E H L M N1) S4 M e 54 M35x1.0 4.0 34 43.5 5.0 39.6 37 Panel cut-out: P6 oA oB H Note: 1) Maximum length with crimp contacts. S4 E maxi M 3 (4 x 90) EEG Fixed receptacle, nut fixing, key (G) or keys (A...M and R) (back panel mounting) L maxi Reference N P e M S2 E maxi oA oB S1 Dimensions (mm) Model Series A B e E L M N1) EEG EEG EEG EEG EEG EEG 00 0B 1B 2B 3B 5B 10 12 16 20 24 41 9.5 12.5 16.0 20.0 25.0 40.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M35x1.0 2.3 2.4 6.0 3.0 5.0 13.5 15.5 20.7 23.0 26.7 30.7 43.5 2.5 2.5 3.5 3.5 4.5 5.0 13.7 6.0 6.3 7.5 19.1 6.3 8.2 9.0 21.1 11.0 10.5 13.0 24.6 9.0 13.5 15.0 28.1 12.0 16.5 20.0 39.6 19.5 33.5 38.0 P S1 S2 Note: 1) Maximum length with crimp contacts. Panel cut-out: P1 The 3B and 5B series are delivered with a conical nut. The 5B series is delivered without locking washer or tapered washer. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 25 (R) (R) EFG Fixed receptacle, nut fixing, key (G) or keys (A...M), with two flats on the shell and O-ring (back panel mounting) L maxi N P Reference e oA oB M Model Series EFG 0B Dimensions (mm) N1) P S2 12 12.5 M9x0.6 5.5 20.7 2.5 19.1 9 8 A B e E L M Panel cut-out: P2 E maxi S2 Note: 1) Maximum length with crimp contacts. ECG Fixed receptacle with two nuts, key (G) or keys (A...M and R) (back panel mounting) Reference L maxi N oA M e oB S3 S1 E maxi Dimensions (mm) Model Series A B e E L M N1) S1 S3 ECG ECG ECG ECG ECG ECG ECG 00 0B 1B 2B 3B 4B 5B 10 12 16 20 24 30 41 9.5 12.5 16.0 20.0 25.0 32.0 40.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 4.3 5.5 6.0 6.5 9.0 10.0 9.0 13.7 20.7 23.0 26.7 30.7 35.7 43.5 2.5 2.5 3.5 3.5 4.5 4.5 5.0 13.7 19.1 21.1 24.6 28.1 32.6 39.6 6.3 8.2 10.5 13.5 16.5 23.5 33.5 9 11 14 17 22 30 - Note: 1) Maximum length with crimp contacts. Panel cut-out: P1 The 3B, 4B and 5B series are delivered with a conical nut. The 5B series is delivered with a tapered washer and a round nut. ECG Fixed receptacle with two nuts, key (G) or keys (A...F and R) and straight contact for printed circuit (back panel mounting) Reference L N M oA e oB S3 S1 E maxi Dimensions (mm) Model Series A B ECG ECG ECG ECG ECG ECG ECG 00 0B 1B 2B 3B 4B 5B 10 12 16 20 24 30 41 9.5 12.5 16.0 20.0 25.0 32.0 40.0 e E M7x0.5 4.3 M9x0.6 5.5 M12x1.0 6.0 M15x1.0 6.5 M18x1.0 9.0 M25x1.0 10.0 M35x1.0 9.0 M N S1 S3 2.5 2.5 3.5 3.5 4.5 4.5 5.0 13.7 16.4 19.8 21.8 25.8 29.8 36.8 6.3 8.2 10.5 13.5 16.5 23.5 33.5 9 11 14 17 22 30 - Panel cut-out: P1 PCB drilling pattern: P15 Note: This contact type is available for E receptacle models fitted with female contacts. Length L depends on the number of contacts, see table on page 192. The 5B series is delivered with a tapered washer and a round nut. The 3B, 4B and 5B series are delivered with a conical nut. ECG Fixed receptacle with two nuts, key (G) or keys (A...F) with elbow (90) contact for printed circuit (back panel mounting) Reference N M 20 mini E maxi 2 26 oB S1 e S3 oA L Dimensions (mm) Model Series A ECG ECG ECG ECG 0B 1B 2B 3B 12 16 20 24 Panel cut-out: P1 B e E 12.5 M9x0.6 2.4 16.0 M12x1.0 6.0 20.0 M15x1.0 6.5 25.0 M18x1.0 9.0 M 2.5 3.5 3.5 4.5 N S1 max 18.3 8.2 20.3 10.5 22.3 13.5 25.8 16.5 S3 11 14 17 22 PCB drilling pattern: P17 Note: This female contact type is available for all back panel mounting receptacle models. Length L depends on the number of contacts, see PCB drilling pattern on page 193. For male contacts, receptacles are available upon request, with J, K or L keys. The 3B series is delivered with a conical nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) EZG Straight receptacle for printed circuit, key (G) or keys (A, B) Reference B 3 Model Series A B H K N EZG 00 6.8 7 5.08 7 14 H N o 0.5 oA o 0.7 Dimensions (mm) PCB drilling pattern: P15 + P16 K EZG Straight receptacle for printed circuit, key (G) or keys (A...F) Reference Dimensions (mm) Model Series A EZG EZG EZG 0B 1B 2B 9 11 14 B H K N 8 8 9 15.0 19.0 22.5 L H N oA M 1.6 B 10 7.62 12 7.62 15 10.16 PCB drilling pattern: P15 + P16 Note: Length L depends on the number of contacts; see table on page 192. K EYG Fixed receptacle for printed circuit, nut fixing, key (G) or keys (A...F) (back panel mounting) Reference N L 9 P B S1 M 1.6 M Series EYG EYG 0B 1B A B C e E M N P S1 12 10 12.5 M9x0.6 2.6 2.5 15 6 8.2 14 12 16.0 M11x0.5 5.0 3.5 19 10 - Panel cut-out: P1 0B series oA e oC 7.62 Model Dimensions (mm) Panel cut-out: P10 1B series PCB drilling pattern: P15 + P16 E maxi Note: Length L depends on the number of contacts; see table on page 192. XPF Fixed receptacle, nut fixing, long shell, keys (F) for printed circuit (back panel mounting) Reference N L P Model Series XPF 0B A B e E M N P R 12 11 M9x0.6 1.5 2.5 19 5 4 e 5.08 Panel cut-out: P2 oA oB M Dimensions (mm) PCB drilling pattern: P15 + P16 R E maxi 1 Note: Length L depends on the number of contacts; see table on page 192. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 27 (R) (R) Elbow (90) receptacles for printed circuit These receptacle models are fixed onto the printed circuit either by soldering the four pins, or with four screws (M1.6) replacing the pins. EXG receptacles are two nut fixing and are recommended in cases where a flexible printed circuit is used. Technical Characteristics Materials and Treatment Types Component Surface treat. (m) Material Cu PPS Brass Brass Bronze PEEK Bronze Housing Series Metallic parts Grounding crown Insulator Female contact Type 1 302 - 3 3 3 - 3 0.5 0.5 0.5 0.5 Au - - - 1.5 Note: 1) Not used for all sizes. The surface treatment standards are as follows: Nickel: FS QQ-N-290A; Gold: ISO 4523. 1 0B, 1B Ni 1) 2 2 1 2 1 1 4 2 3 Electrical 1 2 304 0B, 1B 1 4 3 2 3 Model Series EPG-XBG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG-EXG EPG 00 0B 0B 0B 0B 0B 0B 1B 1B 1B 1B 1B 1B 1B 1B 1B Types 1 2 305 0B, 1B 1 5 4 2 3 0B, 1B 306 6 5 4 1 2 3 5 3 4 1 6 3 4 5 2 1 0B, 1B 7 307 2 3 1B 6 5 4 2 3 4 1 7 1 1B 6 2 7 5 4 8 308 1 2 7 3 8 6 4 5 10 310 1 8 2 9 7 3 10 6 4 5 5 3 4 9 8 6 7 6 5 302-303-304 302 303 304 305 306 307 302 303 304 305 306 307 308 310 314 Rated current (A) 3 3 Test voltage (kV rms)1) Contact-shell 2 Test voltage (kV rms)1) Contact-contact 303 0B, 1B 1.00 1.45 1.70 1.30 1.25 1.25 1.00 1.70 1.60 1.70 1.30 1.35 1.45 1.30 1.00 1.00 1.00 1.20 1.60 1.10 1.20 1.20 1.00 1.45 1.85 1.80 1.55 1.45 1.45 1.30 1.00 1.30 2.0 4.5 4.5 4.5 4.5 2.5 2.0 4.5 4.5 4.5 4.5 4.5 2.0 2.0 1.5 1.0 Note: 1) See calculation method, caution and suggested standard on page 204. oA 5.08 EPG Elbow (90) receptacle for printed circuit, key (G) or keys (A, B) Reference L EPG.00.302.NLN EPG.00.303.NLN EPG.00.304.NLN K D 6.8 11 Dimensions (mm) H I K 3.5 7 7 L N 17.5 7 H I N A 3 PCB drilling pattern: P18 28 o 0.7 D LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) EPG Elbow (90) receptacle for printed circuit, key (G) or keys (A...F) (solder or screw fixing) 2.54 7.62 Reference oA EPG.0B.302.HLN EPG.0B.303.HLN EPG.0B.304.HLN EPG.0B.305.HLN EPG.0B.306.HLN EPG.0B.307.HLN EPG.1B.302.HLN EPG.1B.303.HLN EPG.1B.304.HLN EPG.1B.305.HLN EPG.1B.306.HLN EPG.1B.307.HLN EPG.1B.308.HLN EPG.1B.310.HLN L N 3 H I K o 0.7 M 1.6 D o 0.7 2.54 A 9 D Dimensions (mm) H I K L N 14.5 6.9 12.7 13.2 25 11.6 11 16.5 7.7 14.0 13.2 27 12.6 PCB drilling pattern: P19 Note: To replace the four ground pins by four screws (M1.6) add an S to the end of the part number. (e.g.: EPG.0B.307.HLNS) oA 12.7 EPG Elbow (90) receptacle for printed circuit, key (G) or keys (A...F) (solder or screw fixing) L N Reference K EPG.1B.314.NLN A D 11 21 Dimensions (mm) H I K L 7.7 14.3 19 N 36 15.4 3 H I PCB drilling pattern: P20 Note: To replace the four ground pins by four screws (M1.6) add an S to the end of the part number. (e.g.: EPG.1B.314.NLNS) o 0.7 o 0.6 M 1.6 D XBG Elbow (90) receptacle fixing nut for printed circuit, key (G) or keys (A, B) (back panel mounting) K 5.08 e M Reference XBG.00.302.NLN XBG.00.303.NLN XBG.00.304.NLN L P H I oA N A D e Dimensions (mm) E H I K L 10 11.5 7x0.5 1.8 3.5 7 M N P 7 17.5 2.5 7 9 Panel cut-out: P2 3 PCB drilling pattern: P18 o 0.7 E maxi D LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 29 (R) (R) EXG Elbow (90) receptacle for printed circuit with two nuts, key (G) or keys (A...F) (solder or screw fixing) (back panel mounting) 7.62 Reference K L S3 oB H I 3 o 0.7 M 1.6 E maxi D 2.54 oA M e N EXG.0B.302.HLN EXG.0B.303.HLN EXG.0B.304.HLN EXG.0B.305.HLN EXG.0B.306.HLN EXG.0B.307.HLN EXG.1B.302.HLN EXG.1B.303.HLN EXG.1B.304.HLN EXG.1B.305.HLN EXG.1B.306.HLN EXG.1B.307.HLN EXG.1B.308.HLN EXG.1B.310.HLN A B D e Dimensions (mm) E H I K L M N S3 12 12.5 14.5 M9x0.6 6.0 6.9 12.7 13.2 25 2.5 10.5 11 14 15.0 16.5 M11x0.5 7.5 7.7 14.0 13.2 27 3.5 14.0 13 Panel cut-out: P2 0B series Panel cut-out: P10 1B series PCB drilling pattern: P19 Note: To replace the four ground pins by four screws (M1.6) add an S to the end of the part number. (e.g.: EXG.0B.307.HLNS). PHG Free receptacle, key (G) or keys (A...M and R), cable collet Reference oA ~L S2 S1 Dimensions (mm) Model Series A L S1 S2 PHG PHG PHG PHG PHG PHG PHG 001) 6.4 9.5 12.5 16.5 19.0 24.4 34.2 27.0 35.5 40.5 47.0 56.0 73.0 99.0 5.5 8.0 10.0 13.0 15.0 21.0 31.0 5 7 9 12 14 20 30 0B 1B 2B 3B 4B 5B Note: 1) The surface design of the 00 series is different. PHG Free receptacle, key (G) or keys (A...M), cable collet and nut for fitting a bend relief Reference oA ~L S2 Dimensions (mm) Model Series A L S1 S2 PHG PHG PHG PHG PHG PHG 001) 6.4 9.5 12.5 16.5 19.0 24.4 26.0 34.5 39.5 46.0 54.5 69.0 5.5 8.0 10.0 13.0 15.0 21.0 5 7 9 12 15 20 0B 1B 2B 3B 4B S1 Note: 1) The surface design of the 00 series is different. The bend relief must be ordered separately (see page 175). 30 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) PNG Free receptacle, nut fixing, key (G) or keys (A...L and R), cable collet with lanyard release Reference B N oA ~L Dimensions (mm) Model Series A B L N S1 S2 PNG PNG PNG PNG PNG 1B 2B 3B 4B 5B 12.5 16.5 19.0 26.0 36.0 20.0 24.2 26.6 36.2 48.0 40.5 47.0 56.0 73.0 99.0 140 160 190 230 300 10 13 15 21 31 9 12 14 20 30 Note: Cable material: stainless steel with PVC sheath. S2 S1 PKG Fixed receptacle, nut fixing, key (G) or keys (A...M and R), cable collet Reference ~L S3 S2 oB e oA M S1 E maxi Dimensions (mm) Model Series A B e E L M S1 S2 S3 PKG PKG PKG PKG PKG PKG PKG 00 0B 1B 2B 3B 4B 5B 8 10 14 18 22 28 40 10.3 12.5 16.0 19.5 25.0 32.0 40.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 6.5 7.0 7.5 8.5 11.5 12.0 11.0 27.0 35.5 40.5 47.0 56.0 73.0 99.0 1.0 1.2 1.5 1.8 2.0 2.5 3.0 6.3 8.2 10.5 13.5 16.5 23.5 33.5 5 7 9 12 14 20 30 9 11 14 17 22 30 - Note: Panel cut-out: P1 The 5B series is delivered with a tapered washer and a round nut. PFG Fixed receptacle, with two nuts, key (G) or keys (A...M and R), cable collet (back panel mounting) Reference ~L M S2 oA e oB S3 S 1 E maxi Dimensions (mm) Model Series A B e E L M S1 S2 S3 PFG PFG PFG PFG PFG PFG PFG 00 0B 1B 2B 3B 4B 5B 8 12 16 20 24 30 41 10.3 12.5 16.0 20.0 25.0 32.0 40.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 5.3 5.0 5.0 6.5 9.0 11.0 10.0 27.0 35.5 40.5 47.0 56.0 73.0 99.0 2.5 2.5 3.5 3.5 4.5 4.5 5.0 6.3 8.2 10.5 13.5 16.5 23.5 33.5 5 7 9 12 14 20 30 9 11 14 17 22 30 - Note: Panel cut-out: P1 The 3B, 4B and 5B series are delivered with a conical nut. The 5B series is delivered with a tapered washer and a round nut. PEG Fixed receptacle, nut fixing, key (G) or keys (A...L), cable collet (back panel mounting) Reference ~L P S2 E maxi Model Series A PEG PEG 3B 4B 24 32 B e E L M S1 56 73 4.5 16.5 5.0 23.5 S2 S4 P 14 20 20 27 12 20 S4 oA M e oB S1 Dimensions (mm) 22 M18x1.0 5.0 34 M25x1.0 12.5 Panel cut-out: P1 Note: The 4B series has an o-ring on the flange. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 31 (R) (R) R Fixed coupler, nut fixing, key (G) or keys (A and J) at the flange end and keys (J, K or M) at the other end M E maxi S1 e oA S3 G Reference G Model RGG RGG 1) RGG 2) RJG RGJ RAK RGM RGG 2) RJG RGJ RJG RGJ RGJ RGJ G RJG J G RGJ J A RAK K G Dimensions (mm) Series Type 0B 0B female - female female - female male - female female - male female - male female - male female - female male - female female - male male - female female - male female - male female - male 0B 1B 1B 2B 3B 4B A B e E L M S1 S3 12 13.8 M10x0.75 12 13.8 M10x0.75 8.0 34 2.0 8.0 43 2.0 9.0 12 9.0 12 12 13.8 M10x0.75 8.0 34 2.0 9.0 12 16 19.5 M14x1.00 8.5 47 2.5 12.5 17 16 19.5 M14x1.00 8.5 39 2.5 12.5 17 20 21.8 M16x1.00 12.0 44 4.0 15.0 19 25 27.5 M20x1.00 32.0 53 4.0 18.5 24 34 32.0 M25x1.00 50.0 65 4.0 23.5 30 Panel cut-out: P4 Note: 1) Only available with two contacts. 2) Only available with three contacts. For this fixed coupler, the first contact type mentioned is always the one at the flange end. On request, these couplers can be produced in other series, with other keys. RGM M Contacts oB L Models with microswitch Some receptacles are available fitted with a microswitch. The microswitch is independent from the electrical contacts of the receptacle. The introduction of a plug into the receptacle activates the microswitch. EMG Fixed receptacle, nut fixing, microswitch, key (G) or keys (A...L) Reference L M 1 2 oA e oB S3 3 S1 E maxi Series EMG EMG 0B 1B A B e E 10 12.5 M9x0.6 5.5 14 16.0 M12x1.0 7.0 L 35 38 M S1 S3 1.2 8.2 11 1.5 10.5 14 Panel cut-out: P1 Note: Only available with 2 or 3 contacts (type 302, 303) in 0B series. Only available with 3 or 6 contacts (type 303, 306) in 1B series. For the microswitch: maximum operating voltage: 270 Veff/Vdc; rated current: 8.5A/0.5A. EMG Fixed receptacle, with two nuts, microswitch, key (G) or keys (A...L) L maxi S3 S1 Model Dimensions (mm) M oA e 2 oB 3 Reference Dimensions (mm) 1 Model Series EMG 2B A B e E L M S1 S3 E maxi 20 19.5 M15x1.0 2.2 26.7 3.5 13.5 17 Panel cut-out: P1 2 3 32 1 Note: For the microswitch: maximum operating voltage: 250 Veff/Vdc; rated current: 7A/0.25A. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Bridge plug The LEMO audio-video connector system consists of two receptacles, with or without microswitch, a bridge plug with or without output monitoring and a plug with or without bend relief. This system is already widely used in telecommunication equipment and in radio and television broadcasting centers. The connectors of this system are fully compatible with all other connector models of the same series and type. However, when designing systems, it should be considered that the distance between the assembled nut-fixing models should correspond to that between the outputs of the bridge plug. In order to provide the user with a coding system, the bridge plug housing, the double panel washers and the bend reliefs are available in nine colors. Technical Characteristics Mechanical and Climatic Electrical Characteristics Value Endurance Working temperature Standard Characteristics Value Contact resistance > 1000 cycles IEC 60512-5 test 9a maximum 194 F < 6 m 0.5 0.5 3 3 - 0.3 Rated current (A) Insulator Male contact Female contact 3 3 Test voltage (kV rms) 1) 2) Metallic parts - 0.5 0.5 Audio-Stereo Polyamide Brass Brass PEEK Brass Bronze Audio-Mono Cu Ni Cr Au Plastic housing 0B 0B 0B 0B 0B 1B 1B 1B 1B - - - - - - - - - 1.05 1.05 0.80 0.80 0.40 1.25 1.25 0.80 0.80 4 4 4 4 2 5 5 3 3 Characteristics Surface treat. (m) Material - - - - 1.0 - 1.5 Note: The surface treatment standards are as follows: - Nickel: FS QQ-N-290A - Chrome: FS QQ-C-320B - Gold: ISO 4523 CFF.0B.302.PLCG CRG.0B.302.PLEG CFF.0B.303.PLCG CRG.0B.303.PLEG CRG.0B.306.PLEG CFF.1B.303.PLCG CRG.1B.303.PLEG CFF.1B.306.PLCG CRG.1B.306.PLEG IEC 60512-2 test 2a Series Materials and Treatment Component Standard Note: The last letter of the part number indicates the color of the housing. Ex. G (standard) is grey. To obtain another color, replace this letter by the letter corresponding to the selected color (see table on page 66). 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. CFF Bridge plug with two non-latching plugs CRG Bridge plug with two non-latching plugs, and monitoring receptacle, key (G) or keys (A...M) M maxi A 1) N B H Reference L maxi Dimensions (mm) Model Series A B CFF-CRG CFF-CRG 0B 1B 13.5 15.0 14 20 H L M N 27.5 37.2 27.2 22.5 35.0 42.0 31.0 22.0 Note: 1) Receptacles are to be mounted with the keys mounted on the opposite side. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 33 (R) (R) Plugs with parallel receptacles These plug models have been designed to divide one or more signals originating from the same source to two different points. They are used in various fields of application, particularly in audio signal transmission. FTG Straight plug, key (G) and two parallel receptacles Reference FTG.0B.302.PLFG FTG.0B.303.PLFG FTG.0B.304.PLFG Technical Characteristics 27.8 12 24 Model FTG.0B.302.PLFG FTG.0B.303.PLFG FTG.0B.304.PLFG Nominal current (A) 15 Test voltage (kV rms) 1) 2) 37.8 Number of contacts Electrical 2 3 4 1.05 0.80 0.80 4 4 3 Materials and Treatment Component Cu Ni Cr Au 1 1 3 2 2 1 4 2 3 Plastic housing Metallic parts 1 1 2 3 2 1 1 2 Type 302 34 2 Type 303 Surface treat. (m) Material 3 4 1 3 2 1 4 2 3 Type 304 Insulator Male contact Female contact Polyamide Brass Special brass PEEK Brass Bronze - 0.5 0.5 3 3 0.5 0.5 3 3 - 0.3 - - - - 1.0 - 1.5 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. The surface treatment standards are as follows: - Nickel: FS QQ-N-290A - Chrome: FS QQ-C-320B - Gold: ISO 4523 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Plastic housing models FGG, FGY, ENG and ENY plug and receptacle models are available with the outer shell and collet nut made with various insulating materials. These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated. The design, including a latch sleeve and a metal grounding crown, guarantees EMC screening efficiency to meet most require- Technical Characteristics Mechanical and Climatic Characteristics Value PSU PEEK Color Endurance Humidity Temperature range Sterilization resistance 1) Resistance to solvents Standard PPSU natural (beige) > 5000 cycles white or grey cream - > 5000 cycles > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F - -58 F/+482 F -58 F/+302 F -58 F/+356 F - > 200 cycles ~20 cycles > 100 cycles IEC 60601-1 44.7 very good limited good - Note: 1) Steam sterilization FGG Straight plug, key (G or J), cable collet, PEEK outer shell Reference ~L oA ~M Model Series FGG FGG FGG 1B 3B 4B Dimensions (mm) A L M 13.5 43.0 32.0 19.0 62.0 47.0 26.0 78.5 60.5 S2 10 15 20 Note: Model also available with a nut for fitting a bend relief. S2 FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell Reference ~L Model Series FGY FGY 2B 3B A L M 16.5 50.5 39.5 19.0 58.0 43.0 S2 13 15 oA ~M Dimensions (mm) S2 FGY Straight plug, keys (Y), cable collet and PSU or PPSU outer shell and nut for fitting a bend relief Reference ~L oA ~M Model Series FGY FGY 2B 3B Dimensions (mm) A L M 16.5 49.5 38.5 19.0 56.5 41.5 S2 13 15 Note: The bend relief must be ordered separately (see page 175). S2 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 35 (R) (R) ENG Fixed receptacle with grounding tab, nut fixing, key (G or J), PEEK outer shell L maxi N oA e oB Reference M S3 E maxi S1 Model Series ENG ENG ENG 1B 3B 4B Dimensions (mm) A B e E L M N1) S1 S3 14 16.0 M12x1.0 7.5 23.0 1.5 21.1 10.5 14 22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22 28 32.0 M25x1.0 12.0 35.7 2.5 32.6 23.5 30 Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. ENY Fixed receptacle with grounding tab, nut fixing, keys (Y), PSU or PPSU outer shell L maxi N Reference M oA e oB S3 E maxi S1 Model Series ENY ENY 2B 3B Dimensions (mm) A B e E L M S3 18 19.5 M15x1.0 8.5 26.7 1.8 24.6 13.5 17 22 25.0 M18x1.0 11.5 30.7 2.0 28.1 16.5 22 Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. Note: Other models with plastic outer shell are available on request. 36 N1) S1 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Watertight or vacuum-tight models YHG, HGG, HCG, HNG, HHG, HMG and S plug, receptacle or coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter P at the end of the reference. Most of these models are also available in a vacuum-tight version. Such models are identified by an additional letter V at the end of the part number (certificate on request). Technical Characteristics Mechanical and Climatic Charateristics Value Endurance Humidity Temperature range Salt spray corrosion test Protection index (mated) Climatic category Leakage rate (He)1) Epoxy resin is used to seal these models. Please refer to page 8 to locate the chapter on selecting watertight connectors. 00 0B 1B 2B 3B 4B 5B Maximum operating pressure2) Part number example: Watertight receptacle - HGG.1B.306.CLLP Vacuum-tight receptacle - HGG.1B.306.CLLPV Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F -4 F/+176 F > 144h IEC 60512-6 test 11f IP 68 IEC 60529 20/80/21 IEC 60068-1 < 10-6 mbar.l.s-1 IEC 60512-7 test 14b 60 bars 60 bars 60 bars 40 bars IEC 60512-7 test 14d 30 bars 15 bars 5 bars Note: 1) Only for vacuum-tight models. 2) This value corresponds to the maximum allowed pressure difference for the assembled receptacle. YHG Fixed plug, nut fixing, non-latching, key (G) or keys (A...M) L maxi Reference oA M e oB S3 S1 E maxi Dimensions (mm) Model Series A YHG YHG YHG YHG 0B 1B 2B 3B 14.0 16.0 19.5 22.0 B e E 12.5 M9x0.6 2.5 16.0 M12x1.0 4.5 19.5 M15x1.0 4.0 25.2 M18x1.0 5.0 L 21.2 25.0 31.5 34.0 M S1 14.6 8.2 16.4 10.2 18.2 13.5 22.4 16.5 S3 11 14 17 22 Panel cut-out: P9 Note: This model does not include an O-ring behind the flange, it ensures only IP61 protection index. Consequently, it is not vacuum-tight. Watertightness (when mated) is only ensured with HHG and HCG receptacles. HGG Fixed receptacle, nut fixing, key (G) or keys (A...M and R), watertight or vacuum-tight Reference L maxi oA M e oB S3 E maxi S1 Dimensions (mm) Model Series A B HGG HGG HGG HGG HGG HGG HGG 00 0B 1B 2B 3B 4B 5B 11 13 18 20 25 34 45 10.3 12.5 16.0 19.5 25.0 32.0 40.0 e E L M M7x0.5 8.0 18.3 1.5 M9x0.6 7.0 20.7 3.0 M12x1.0 7.0 26.0 4.5 M15x1.0 8.0 29.7 4.0 M18x1.0 11.5 36.2 4.0 M25x1.0 11.0 44.7 4.0 M35x1.0 11.0 51.7 5.0 S1 S3 - 8.2 10.5 13.5 16.5 23.5 33.5 9 11 14 17 22 30 - Panel cut-out: P9 Note: The 5B series is delivered with a tapered washer and a round nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 37 (R) (R) HNG Fixed receptacle, nut fixing, with grounding tab, key (G) or keys (A...M), watertight or vacuum-tight L maxi S3 M oA e oB Reference E maxi Model Series HNG 0B Dimensions (mm) A B e 13 12.5 M9x0.6 E L M S1 S3 7 20.7 3 8.2 11 S1 Panel cut-out: P9 HHG Fixed receptacle, nut fixing, key (G) or keys (A...M), watertight or vacuum-tight (watertight when mated) Reference L maxi M oA e oB S3 Dimensions (mm) Model Series A HHG HHG HHG HHG 0B 1B 2B 3B 13 18 22 25 B e E 12.5 M9x0.6 7.0 16.0 M12x1.0 7.0 19.5 M15x1.0 8.0 25.2 M18x1.0 11.5 L 23.7 29.7 33.7 41.4 M S1 4.8 8.2 5.2 10.5 6.0 13.5 7.2 16.5 S3 11 14 17 22 Panel cut-out: P9 E maxi S1 HCG Fixed receptacle, nut fixing, key (G) or keys (A...M), watertight or vacuum-tight (watertight when mated) (back panel mounting) Reference Dimensions (mm) L maxi P e oA e1 oB oC Model Series HCG HCG HCG 0B 1B 2B A B C e e1 E F L M P 18 18 12.0 M14x1.0 M9x0.6 3.9 1.0 23.7 3.5 7.5 12.5 20 20 14.5 M16x1.0 M12x1.0 6.2 2.0 29.7 3.5 10.0 14.5 24 24 17.5 M19x1.0 M14x1.0 6.7 1.5 33.7 3.5 11.3 17.0 Panel cut-out: P3 E maxi S1 HEG Fixed receptacle, nut fixing, key (G) or keys (A...M), watertight or vacuum-tight (back panel mounting) Reference L maxi P S2 S1 Dimensions (mm) Model Series A B e E L HEG 2B 20 20 M15x1.0 5.4 33.7 M P S1 3.5 9.6 13.5 e oA oB S2 M Panel cut-out: P9 E maxi 38 S1 M F maxi LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 15 (R) (R) HMG Fixed receptacle with grounding tab, nut fixing, key (G) or keys (A...M), watertight or vacuum-tight (back panel mounting) Reference L maxi P S1 oA e oB M Dimensions (mm) Model Series A B e E L M HMG HMG HMG 0B 1B 3B 12 16 24 13 M9x0.6 4.7 20.7 18 M12x1.0 5.5 26.0 25 M18x1.0 7.5 36.2 P S1 2.5 9.0 8.2 3.5 11.0 10.5 4.5 13.6 16.5 Panel cut-out: P9 Note: The 3B series is delivered with a conical nut. E maxi S Fixed coupler, nut fixing, key (G) or keys (A, B, J, K and L) at the flange end and key (G) or keys (A, B, J, K and L) at the other end, watertight or vacuum-tight L S1 oA M e oB S3 E maxi Reference J G SGJ J G SJG K A SKA B SLB L A K SAK B SBL L Model SGJ SJG SGJ SJG SGJ SJG SGJ SJG SAK SBL SAK SBL SGJ SJG SGJ SJG SKA SLB SAK SBL Series 0B 1B 2B 3B 4B 5B Panel cut-out: P4 Contacts Type female - male male - female female - male male - female female - male male - female female - male male - female female - male female - male female - male female - male female - male male - female female - male male - female male - female male - female female - male female - male Dimensions (mm) A B e E L M S1 S3 14 13.8 M10x0.75 17 34 2.0 9.0 12 17 16.0 M12x1.00 28 39 2.5 10.5 14 20 21.8 M16x1.00 25 44 4.0 15.0 19 25 27.1 M20x1.00 30 53 4.0 18.5 24 34 32.0 M25x1.00 50 65 4.0 23.5 30 45 40.0 M35x1.00 58 80 5.0 33.5 - Panel cut-out: P9 1B series Note: For this fixed coupler, the first contact type mentioned is always the one at the flange end. On request these couplers can be produced in other series, with other keys. The 5B series is delivered with a round nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 39 (R) (R) Threaded-fixing models The 00 multicontact series includes two threaded-fixing plug models. These plugs can be mated with receptacles with a threaded front end (XRB or ESG). Plugs include an O-ring, guaranteeing an IP64 protection index when mated. FVG Straight plug, key (G) or keys (A, B), cable collet, threaded-fixing Reference ~L oA ~M S1 Dimensions (mm) Model Series A L M S1 S2 FVG 00 9 28.5 24 5 5 Note: To be ordered with nut for fitting a bend relief to obtain the rating IP 64. S2 FVB Straight plug, keys (B), threaded-fixing for special cable crimping L Reference oA M Dimensions (mm) Model Series A L M FVB 00 9 20 15.4 Note: After assembly the special bend relief GMF.00.018.D (to be ordered separately) is to be fitted. XRB Elbow (90) receptacle fixing nut for printed circuit, keys (B), short shell, threaded-fixing (back panel mounting) 2.05 5.5 = = 1.2 Reference L P Dimensions (mm) Model Series A e E I L M P XRB 00 10 M7x0.5 1.8 7 14 2.5 7 e I oA 2.5 mini 1) M Panel cut-out: P2 PCB drilling pattern: P18 for contact only 3 Note: 1) Minimum length of free thread to ensure mating. 2 x M 1.4 E maxi ESG Fixed receptacle with two round nuts, key (G), or keys (A, B), long threaded shell (back panel mounting) L maxi N 3.2 mini 1) oA e oB M E maxi Reference Dimensions (mm) Model Series A B ESG 00 9.5 9 e E M7x0.5 4.2 L M N 15.5 2 13.7 Panel cut-out: P2 Note: 1) Minimum length of free thread to ensure mating. 40 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) K Series K series connectors have been specifically designed for outdoor applications. They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free socket, fixed socket or coupler. All models of this series are watertight when mated to give a protection index of IP68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP66 otherwise). K series connectors have the same insulators as the B series and have the following main features: - security of the Push-Pull latching system - watertight connection (IP 68/IP 66) - multicontact types 2 to 64 contacts - solder, crimp or printed circuit (straight or elbow) contacts - keying system (G key standard) for connector alignment - multiple key options to avoid cross mating of similar connectors - high packing density for space savings - 360 screening for full EMC shielding - rugged housing for extreme working conditions. Interconnections Fixed plugs Straight plugs FGG FXG Fixed receptacles EGG EBG Free receptacles Fixed receptacle with microswitch PHG EMG Free coupler FAG FGG ENG EDG PHG Elbow plug TGL FGG FHG EEG EHG PHG Fixed receptacles FNG EEG T-plug with receptacles (90) EVG PKG FTG Watertight or vacuum-tight models Fixed receptacles EEG PBG Fixed coupler PEG HGG HEG S** LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 41 (R) (R) Model Description EBG Fixed receptacle with square flange, key (G) or keys (A to F, L and R), screw fixing EDG Fixed receptacle with square flange, key (G) or keys (A to F, L and R), protruding shell and grounding tab, screw fixing EEG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R), (back panel mounting) EEG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R) with straight printed circuit contacts for printed circuit (back panel mounting) EEG Fixed receptacle, nut fixing, key (G) or keys (A to F and R) with elbow (90) contacts for printed circuit (back panel mounting) EGG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R) EHG Fixed receptacle, nut fixing, key (G) or keys (A to F and L), protruding shell EMG Fixed receptacle, nut fixing, with microswitch, key (G) or keys (A to F and L) ENG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R) and grounding tab EVG Fixed receptacle, nut fixing, key (G) or keys (A to F and L) and dust cap (spring loaded) FAG Fixed plug, nut fixing, non-latching, key (G) or keys (A to F, L and R) FGG Straight plug, key (G) or keys (A to F, L and R), cable collet FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and oversize cable collet FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief FHG Elbow (90) plug, key (G) or keys (A to F, L and R), cable collet FNG Straight plug, key (G) or keys (A to F and L), cable collet and lanyard release FTG T-plug, key (G) with receptacles (90), key (G) FXG Fixed plug with round flange, key (G) or keys (A to F, L and R), screw fixing HEG Fixed receptacle, nut fixing, key (G) or keys (A to F and L), watertight or vacuum-tight (back panel mounting) HGG Fixed receptacle, nut fixing, key (G) or keys (A to F and L), watertight or vacuum-tight PBG Fixed receptacle, key (G) with square flange, cable collet, screw fixing PEG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R), cable collet (back panel mounting) PHG Free receptacle, key (G) or keys (A to F, L and R), cable collet PHG Free receptacle, key (G) or keys (A to F, L and R), cable collet and oversize cable collet PHG Free receptacle, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief PKG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R), cable collet S Fixed coupler, nut fixing, key (G) or keys (L) at the flange end, and key (G) or keys (C or L) at the other end, watertight or vacuum-tight TGL Free coupler, key (G) on one side and keys (L) on the other Part Section Showing Internal Components Straight plug Fixed receptacle 1 outer shell 5 1 2 3 4 5 6 7 2 4 3 7 7 1 6 8 2 3 7 6 4 1 9 11 12 10 5 outer shell grounding crown retaining ring hexagonal nut insulator female contact O-ring 2 latch sleeve 3 inner shell 4 retaining ring 5 collet nut 6 split insert carrier 7 insulator 8 male contact 9 grounding cone 10 collet 11 gasket 12 washer Technical Characteristics Mechanical and Climatic Characteristics Endurance Humidity Temperature range1) 2) Resistance to vibrations Shock resistance Salt spray corrosion test Protection index (mated) Climatic category1) 42 Electrical Value Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F -58 F, +392 F 10-2000 Hz, 15 g IEC 60512-4 test 6d 100 g, 6 ms IEC 60512-4 test 6c > 144h IEC 60512-6 test 11f IP 68/IP 66 IEC 60529 50/175/21 IEC 60068-1 Characteristics Shielding efficiency at 10 MHz at 1 GHz Value > 95 dB > 80 dB Standard IEC 60169-1-3 IEC 60169-1-3 Note: The various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell, PEEK insulator and silicone O-ring. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 197. 1) For watertight or vacuum-tight models see page 52. 2) Minimum operating temperature is -4F for receptacles fitted with an FPM (Viton) O-ring. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Available Models (series and types) Model EBG EDG EEG EEG 4) EGG EHG EMG ENG EVG Multicontact 0K 1K 2K 3K 4K 5K FAG FGG FGG 1) FGG 2) FHG FNG FTG FXG HEG Multicontact 0K 1K 2K 3K 4K 5K Model Model HGG PBG PEG PHG PHG 1) PHG 2) PKG S TGL 3) Multicontact 0K 1K 2K 3K 4K 5K Note: 1) With oversize cable collet. 2) With nut for fitting a bend relief. 3) The TGL model is not available in all types. Please consult the page corresponding to this model. 4) With elbow (90) printed circuit contacts. = available models by series and types Alignment Key and Polarized Keying System Part numbers for the keyed series are composed of three letters. The LAST LETTER indicates the key position and the contact type (male or female). For example, straight plugs with G key or A, B, C, D, E, F, R keys, are fitted with male contacts; whereas with L keys, plugs are fitted with female contacts. G A B C D E F L 1 2 2 2 2 2 2 2 # of keys 5 Series Contact type Note 0K 1K 2K 3K 4K 5K Plug Receptacle Coupler 1) 0 30 45 60 95 120 145 75 0 30 45 60 95 120 145 75 0 30 45 60 95 120 145 75 0 30 45 60 95 120 145 75 0 30 45 60 95 120 145 75 0 30 45 60 95 120 145 75 male male male male male male male female female female female female female female female male female-male female-male female-male female-male female-male female-male female-male male-female Series Contact type 0K 1K 2K 3K 4K 5K Plug Receptacle - - - - - - - - - - - - 95 115 35 25 - - - - - - - - male female Front view of a receptacle Angles # of keys Angles Model Front view of a receptacle Model Straight receptacles with G key or A, B, C, D, E, F, R keys, are fitted with female contacts; whereas with L keys, receptacles are fitted with male contacts. Note Coupler 1) R female-male Note: S and TGL models are not available with all the keys. For S models see explication on page 53. Please consult the pages corresponding to these models. 1) The first contact type mentioned is always the one at the flange end. First choice alternative Special order alternative LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 43 (R) (R) Part Number Example Straight plug with cable collet FGG 2K 310 C L A C 65 Model: (page 45) Series: (page 45) Variant: see note 1) Type: (page 55) Cable o: (page 61) Housing: (page 60) Collet type: (page 61) Insulator: (page 60) Contact: (page 60) FGG.2K.310.CLAC65 = straight plug with key (G) and cable collet, 2K series, multicontact type with 10 contacts, outer shell in chrome-plated brass, PEEK insulator, male solder contacts, C type collet for 6.5 mm diameter cable. Fixed receptacle EGG 1K 306 C L M Model: (page 46) Series: (page 46) Variant: see note 1) Type: (page 55) Contact: (page 60) Housing: (page 60) Insulator: (page 60) EGG.1K.306.CLM = fixed receptacle, nut fixing, with key (G), 1K series, multicontact type with 6 contacts, outer shell in chromeplated brass, PEEK insulator, female crimp contacts. Straight receptacle PKG 4K 304 C L L C 65 Model: (page 49) Series: (page 49) Variant: see note 1) Type: (page 55) Cable o: (page 61) Housing: (page 60) Cable fixing type: (page 61) Insulator: (page 60) Contact: (page 60) PKG.4K.304.CLLC65 = straight receptacle, nut fixing, with key (G), 4K series, multicontact type with 4 contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts, C type collet for 6.5 mm diameter cable. Note: 1) The Variant position in the reference is used to specify either the presence of a collet nut for fitting the bend relief or the anodized color of the housing in aluminium alloy. For models with collet nut for fitting the bend relief, a Z should be indicated and a bend relief can be ordered separately as indicated in the Accessories section. An order for a connector with bend relief should thus include two part numbers. For the various housings available in colors, the corresponding letter in the part number for the color is indicated on page 66. For the watertight models of receptacle, the letter P is used; for the vacuum-tight models of receptacle the letters PV shall be indicated. For the plug and receptacle that should be fitted with an FPM (Viton) O-ring the letter H shall be indicated. 44 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ (R) Models - Series @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ FGG Straight plug, key (G) or keys (A to F, L and R), cable collet Reference ~L oA ~M Dimensions (mm) Model Series A L M S2 FGG FGG FGG FGG FGG FGG 0K 1K 2K 3K 4K 5K 11 13 16 19 25 38 34 42 52 61 71 92 23.0 28.0 36.0 41.0 50.5 67.0 8 9 12 15 19 32 S2 FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and oversize cable collet Reference Dimensions (mm) Model Series A B L M S1 S2 FGG FGG FGG FGG 1K 2K 3K 4K 13 16 19 25 14.5 17.0 22.0 36.0 55 65 80 105 41.0 49.0 60.0 84.5 12 15 19 30 12 15 19 32 ~L oB oA ~M S2 Note: The fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up. S1 FGG Straight plug, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief Reference Dimensions (mm) Model Series A L M S2 FGG FGG FGG FGG FGG 0K 1K 2K 3K 4K 11 13 16 19 25 34 42 52 60 71 23.0 28.0 36.0 40.0 50.5 7 9 12 15 19 ~L oA ~M S2 Note: The bend relief must be ordered separately (see page 175). FNG Straight plug, key (G) or keys (A to F and L), cable collet and lanyard release Reference Dimensions (mm) ~L B N oA ~M Model Series A B L M N S2 FNG FNG 2K 4K 16 25 23.6 35.2 52 71 36.0 50.5 160 230 12 19 Note: Cable material - stainless steel with PVC sheath. S2 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 45 (R) (R) FXG Fixed plug with round flange, key (G) or keys (A to F, L and R) and screw fixing Reference ~L P M oB oG Model Series A B G H FXG FXG FXG 3K 4K 5K 38 47 65 22.5 28.5 42.5 3.4 3.4 4.4 20.6 27.0 38.0 L M P 61 10.0 30.0 71 11.0 32.0 100 12.5 38.5 S2 15 19 30 Panel cut-out: P6 oA H Dimensions (mm) Note: This model does not include an O-ring behind the flange, it allows the device on which it is fitted to reach only IP50 protection index. It does not have a cable collet. S2 FAG Fixed plug, nut fixing, non-latching, key (G) or keys (A to F, L and R) L maxi N Reference oA M e oB S3 Dimensions (mm) Model Series A B e E L M N1) S1 S3 FAG FAG FAG FAG 2K 3K 4K 5K 25 31 37 55 27.5 34.5 41.5 54.0 M20x1.0 M24x1.0 M30x1.0 M45x1.5 4.5 4.0 4.0 4.0 28.2 34.3 35.3 43.5 18.0 22.5 23.0 28.5 28.3 33.8 36.3 42.3 18.5 24 22.5 30 28.5 36 42.5 - S1 E maxi Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. FHG Elbow (90) plug, key (G) or keys (A to F, L and R), cable collet ~L S1 ~M ~H oA Reference S3 S2 D Model Series FHG FHG FHG FHG FHG 0K 1K 2K 3K 4K Dimensions (mm) A D 11.5 7.6 14.0 8.8 17.5 10.5 21.0 11.5 27.5 15.5 H L M S1 S2 S3 27 33 40 47 57 36 43 51 60 72 25.0 29.0 35.0 40.0 51.5 10 12 15 18 24 8 9 12 15 19 8 10 13 15 20 EGG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R) L maxi Reference N oA M e oB S3 E maxi Dimensions (mm) Model Series A B EGG EGG EGG EGG EGG EGG 0K 1K 2K 3K 4K 5K 18 20 25 31 37 55 19.5 21.5 27.5 34.5 41.5 54.0 e E L M M14x1.0 6 21.7 4.0 M16x1.0 9 27.0 4.5 M20x1.0 9 30.7 5.0 M24x1.0 11 36.2 6.0 M30x1.0 9 40.2 6.5 M45x1.5 10 47.5 9.0 S1 Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. The 5K series is delivered with a round nut. 46 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com N1) 20.1 25.1 28.6 33.6 37.1 43.6 S1 S3 12.5 14.5 18.5 22.5 28.5 42.5 17 19 24 30 36 - (R) (R) ENG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R) and grounding tab L maxi N S3 M oA e oB Reference Model Series ENG 3K Dimensions (mm) A B e E L M N1) 6 33.6 22.5 30 31 34.7 M24x1.0 11.3 36.2 S1 S3 Panel cut-out: P1 E maxi S1 Note: 1) Maximum length with crimp contacts. EEG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R) (back panel mounting) L maxi N Reference P S1 oA e oB M E maxi Dimensions (mm) M N1) Model Series A B e E L EEG EEG EEG EEG EEG 0K 1K 2K 3K 4K 18.0 20.0 25.0 30.0 41.5 18 20 25 31 37 M14x1.0 M16x1.0 M20x1.0 M24x1.0 M30x1.0 3.4 6.2 5.0 7.5 6.0 21.7 27.0 30.7 36.2 40.2 3.5 3.5 3.5 4.5 7.0 P 20.1 7.0 25.1 10.0 28.6 10.0 33.6 12.0 37.1 13.5 S1 12.5 14.5 18.5 22.5 28.5 Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. The 3K and 4K series are delivered with a conical nut. EEG Fixed receptacle, nut fixing, key (G) or keys (A to F and R) with straight printed circuit contacts for printed circuit (back panel mounting) L N Reference Dimensions (mm) P S1 oA e oB M Model Series A B e E M EEG EEG EEG EEG EEG 0K 1K 2K 3K 4K 18.0 20.0 25.0 30.0 41.5 18 20 25 31 37 M14x1.0 M16x1.0 M20x1.0 M24x1.0 M30x1.0 3.4 6.2 5.0 7.5 6.0 3.5 3.5 3.5 4.5 7.0 N P 17.6 7.0 23.8 10.0 25.8 10.0 31.3 12.0 34.3 13.5 S1 12.5 14.5 18.5 22.5 28.5 E maxi Panel cut-out: P1 PCB drilling pattern: P15 Note: This contact type is available for E receptacle models fitted with female contact. Length L depends on the number of contacts, see table page 192. The 3K and 4K series are delivered with a conical nut. L EEG Fixed receptacle, nut fixing, key (G) or keys (A to F and R) with elbow (90) contacts for printed circuit (back panel mounting) N P M 20 mini E maxi oA Reference e oB S1 Model Series A B e E M N P S1 EEG EEG EEG EEG 0K 1K 2K 3K 18 20 25 30 18 20 25 31 M14x1.0 M16x1.0 M20x1.0 M24x1.0 3.4 6.2 5.0 7.5 3.5 3.5 3.5 4.5 19.3 24.3 26.6 31.3 7 10 10 12 12.5 14.5 18.5 22.5 Panel cut-out: P1 2 Dimensions (mm) PCB drilling pattern: P17 Note: Length L depends on the number of contacts, see PCB drilling pattern page 193. The 3K series is delivered with a conical nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 47 (R) (R) EBG Fixed receptacle with square flange, key (G) or keys (A to F, L and R) and screw fixing Reference L N A M oB H Dimensions (mm) Model Series A B F G EBG EBG EBG 3K 4K 5K 29 37 54 23 30 45 3 3 4 3.4 3.4 4.4 H L N1) M 23 36.2 6.0 32.6 29 40.2 6.5 36.6 44 47.5 8.0 42.1 Panel cut-out: P7 Note: 1) Maximum length with crimp contacts. F oG EDG Fixed receptacle with square flange, key (G) or keys (A to F, L and R), protruding shell and grounding tab, screw fixing L Reference Dimensions (mm) N A M oB Model Series A B C F G EDG 3K 29 18 23 3 3.4 H L N1) M 23 36.2 22.5 32.6 Panel cut-out: P7 oC H Note: 1) Maximum length with crimp contacts. F oG EHG Fixed receptacle, nut fixing, key (G) or keys (A to F and L), protruding shell L maxi N S4 M oA e oB Reference S 3 E maxi S1 Model Series EHG EHG 1K 2K Dimensions (mm) A B e E L N1) S1 S3 S4 M 20 21.5 M16x1.0 1.5 27.0 15.5 25.1 14.5 19 17 25 27.5 M20x1.0 1.5 30.7 17.0 27.1 18.5 24 20 Panel cut-out: P1 Note: 1) Maximum length with crimp contacts. EVG Fixed receptacle, nut fixing, key (G) or keys (A to F and L) and dust cap (spring loaded) L maxi N M oA P e oB S3 Dimensions (mm) Reference Model Series EVG 0K A B e E L M N1) 48 S1 S1 S3 18 19.5 M14x1.0 6 24.8 7.2 23.3 21.6 12.5 17 Panel cut-out: P1 E maxi P Note: 1) Maximum length with crimp contacts. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) PHG Free receptacle, key (G) or keys (A to F, L and R), cable collet Reference oA ~L S2 Dimensions (mm) Model Series A L S2 PHG PHG PHG PHG PHG PHG 0K 1K 2K 3K 4K 5K 13 15 19 23 29 42 34.0 45.0 54.0 65.0 75.5 95.0 8 9 12 15 19 32 PHG Free receptacle, key (G) or keys (A to F, L and R), cable collet and oversize cable collet Reference oB oA ~L Model Series A B L S1 S2 PHG PHG PHG PHG 1K 2K 3K 4K 15 19 23 29 14.5 17.0 22.0 36.0 58 67 84 109 12 15 19 30 12 15 19 32 Note: The fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up. S1 S2 Dimensions (mm) PHG Free receptacle, key (G) or keys (A to F, L and R), cable collet and nut for fitting a bend relief Reference oA ~L Dimensions (mm) Model Series A L S2 PHG PHG PHG PHG PHG 0K 1K 2K 3K 4K 13 15 19 23 29 34.0 45.0 54.0 64.0 75.5 7 9 12 15 19 S2 Note: The bend relief must be ordered separately (see page 175). PKG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R), cable collet Reference ~L oA M e oB S3 Dimensions (mm) Model Series A B PKG PKG PKG PKG PKG PKG 0K 1K 2K 3K 4K 5K 18 20 25 31 37 55 19.5 21.5 27.5 34.5 41.5 54.0 e E L M M14x1.0 6 34.0 4.0 M16x1.0 9 45.0 4.5 M20x1.0 9 54.0 5.0 M24x1.0 11 65.0 6.0 M30x1.0 9 75.5 6.5 M45x1.0 15 95.0 9.0 S1 S2 S3 12.5 14.5 18.5 22.5 28.5 42.5 8 9 12 15 19 32 17 19 24 30 36 - Panel cut-out: P1 S2 E maxi S1 Note: The 5K series is delivered with a round nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 49 (R) (R) PBG Fixed receptacle, key (G) with square flange, cable collet and screw fixing Reference ~L A M oB oC H S2 oG Dimensions (mm) Model Series A B C F G H L M S2 PBG 3K 29 19 23 3 3.4 23 65 22.5 15 Panel cut-out: P7 F PEG Fixed receptacle, nut fixing, key (G) or keys (A to F, L and R), cable collet (back panel mounting) Reference Dimensions (mm) ~L Model Series A B e E L M P S1 PEG PEG PEG PEG 0K 1K 2K 3K 18 20 25 30 18 20 25 31 M14x1.0 M16x1.0 M20x1.0 M24x1.0 3.4 6.2 2.5 7.5 34 45 54 65 3.5 3.5 3.5 4.5 7 10 10 12 12.5 14.5 18.5 22.5 P e M oA oB S1 Panel cut-out: P1 S2 50 E maxi Note: The 3K series is delivered with a conical nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Model with microswitch Some receptacles are available fitted with a microswitch. The microswitch is independent from the electrical contacts of the receptacle. The introduction of a plug into the receptacle activates the microswitch. EMG Fixed receptacle, nut fixing, with microswitch, key (G) or keys (A to F and L) Reference L S3 Model Series EMG 2K Dimensions (mm) A B e E L 9 49 M S1 S3 5 18.5 24 M 25 27.5 M20x1.0 1 2 oA e oB Panel cut-out: P1 4 E maxi Note: For the microswitch - maximum operating voltage: 270 Veff/Vdc; - rated current: 8.5A/0.5A. S1 TGL Free coupler, key (G) on one side and keys (L) on the other Reference oA L Dim. (mm) Model Series A L TGL 3K 24 64.2 Note: This model is only available in type 308, 310, 316, 318, 320 and 324. FTG T-plug, key (G) with receptacles (90), key (G) Reference L oA Model Series A B H L M FTG 2K 16 19 48 77 60 Note: This model is only available in type 304. H oB M Dimensions (mm) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 51 (R) (R) Watertight or vacuum-tight models HEG, HGG and S receptacle or coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc.These models are identified by a letter P at the end of the reference. Most of these models are also available in a vacuum-tight version. Such models are identified by an additional letter V at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Please refer to page 8 to locate the chapter on selecting watertight connectors. Part number example: Watertight receptacle - HGG.0K.304.CLLP Vacuum-tight receptacle - HGG.0K.304.CLLPV Technical Characteristics Mechanical and Climatic Characteristics Value Endurance Humidity Temperature range Salt spray corrosion test Protection index (mated) Climatic category Leakage rate (He)1) 0K 1K 2K 4K 5K Maximum operating pressure2) Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F -4 F/+176 F > 144h IEC 60512-6 test 11f IP 68 IEC 60529 20/80/21 IEC 60068-1 < 10-6 mbar.l.s-1 IEC 60512-7 test 14b 60 bars 60 bars 40 bars IEC 60512-7 test 14d 15 bars 5 bars Note: 1) Only for vacuum-tight models. 2) This value corresponds to the maximum allowed pressure difference for the assembled receptacle. HGG Fixed receptacle, nut fixing, key (G) or keys (A to F and L), watertight or vacuum-tight L maxi M Reference oA e oB S3 E maxi Dimensions (mm) Model Series A B e E L M HGG HGG HGG HGG 0K 1K 2K 5K 18 20 25 55 19.5 21.5 27.5 54.0 M14x1.0 M16x1.0 M20x1.0 M45x1.5 5.5 9.0 13.0 10.0 21.7 30.0 33.7 55.7 4.0 4.5 5.0 9.0 S1 S3 12.5 17 14.5 19 18.5 24 42.5 - S1 Panel cut-out: P1 Note: The 5K series is delivered with a round nut. HEG Fixed receptacle, nut fixing, key (G) or keys (A to F and L), watertight or vacuum-tight (back panel mounting) L maxi P S1 M oA e oB Reference Model Series HEG HEG HEG 0K 1K 2K Dimensions (mm) A B e E L M S1 18 18 M14x1.0 2.4 21.7 3.5 7 12.5 20 20 M16x1.0 6.2 30.0 3.5 10 14.5 25 25 M20x1.0 5.0 33.7 3.5 10 18.5 E maxi Panel cut-out: P1 52 P LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) S Fixed coupler, nut fixing, key (G) or keys (L) at the flange end, and key (G) or keys (C or L) at the other end, watertight or vacuum-tight L M oA S1 e oB S3 E maxi G SGL L G SLG L Reference Contacts Dimensions (mm) Model Series Type A B e E L M S1 S3 SGL 2K female - male 25 27.5 M20x1.0 25 52.4 5.0 18.5 24 SLG SLC 4K male - female 37 40.0 M30x1.0 48 74.0 6.5 28.5 36 SLC 5K male - female 55 54.0 M45x1.5 58 88.0 9.0 42.5 - C Panel cut-out: P1 SLC L Note: For this fixed coupler, the first contact type mentioned is always the one at the flange end. On request, these couplers can be produced in other series, with other keys, the 5K series is delivered with a round nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 53 (R) 54 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ (R) Type (B and K series) @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ oA Multicontact Number of contacts o A (mm) Solder Crimp Printed circuit (straight) Printed circuit (elbow) Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Test voltage (kV rms)1) Contact-shell Rated current (A)1) Female crimp contacts 00 2 0.5 1.00 0.95 1.15 1.20 5.0 303 3 0.5 0.80 0.95 1.35 1.10 3.0 304 4 0.5 0.80 0.65 1.05 1.05 2.0 0B 0K 302 2 0.9 1.30 1.05 1.45 1.20 10.02) 303 3 0.9 1.20 0.90 1.70 1.60 8.02) 304 4 0.7 0.85 0.70 1.35 1.10 7.02) 305 5 0.7 1.00 0.70 1.25 1.20 6.52) 306 6 0.5 0.85 0.65 1.40 1.20 2.5 307 7 0.5 0.80 0.70 1.40 1.20 2.5 309 9 0.5 0.60 0.50 1.00 0.85 2.0 1B 1K 302 2 1.3 1.50 1.35 1.70 1.45 15.03) 303 3 1.3 1.30 1.55 1.60 1.85 304 4 0.9 1.35 1.45 1.70 1.80 10.02) 305 5 0.9 1.25 1.15 1.30 1.55 9.02) 306 6 0.7 1.05 1.20 1.35 1.45 7.02) 307 7 0.7 0.95 1.05 1.45 1.45 7.02) 308 8 0.7 0.95 1.15 1.30 1.30 5.0 310 10 0.5 0.90 1.50 1.20 1.80 2.5 314 14 0.5 0.80 1.20 0.95 1.60 2.0 316 16 0.5 0.80 1.25 0.95 1.60 1.5 First choice alternative Special order alternative Note: 1) 2) 3) Test voltage (kV rms)1) Contact-contact Reference Male crimp contacts Crimp contact 302 Female solder contacts oA Male solder contacts Solder contact Contact type 12.0 See calculation method, caution and suggested standard on page 204. Rated current = 6A for receptacle with elbow (90) contact for printed circuit. Rated current = 12A for receptacle with elbow (90) contact for printed circuit. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 55 (R) (R) oA Multicontact Number of contacts o A (mm) Solder Crimp Printed circuit (straight) Printed circuit (elbow) Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Female crimp contacts 2B 2K 2 2.0 2.10 1.75 2.85 2.70 30.03) 303 3 1.6 2.40 1.85 1.90 1.90 17.03) 304 4 1.3 1.85 1.85 2.20 2.20 15.03) 305 5 1.3 1.75 1.60 2.15 2.15 14.03) 306 6 1.3 1.35 1.45 2.00 2.35 12.0 307 7 1.3 1.75 1.60 1.95 2.15 11.0 308 8 0.9 1.50 1.25 1.95 1.95 10.02) 310 10 0.9 1.45 1.30 1.80 2.10 8.02) 312 12 0.7 1.25 1.35 1.65 2.00 7.02) 314 14 0.7 1.15 1.35 1.55 1.95 6.52) 316 16 0.7 0.95 1.25 1.55 1.75 6.0 318 18 0.7 0.85 1.20 1.45 2.10 5.5 319 19 0.7 0.95 1.25 1.55 1.65 5.0 326 26 0.5 - 0.95 1.30 1.20 1.80 2.0 332 32 0.5 - 0.80 0.95 1.60 1.5 First choice alternative 56 Special order alternative Note: 1) 2) 3) 1.2 Rated current (A)1) Reference Male crimp contacts Crimp contact 302 Female solder contacts oA Male solder contacts Solder contact Contact type See calculation method, caution and suggested standard on page 204. Rated current = 6A for receptacle with elbow (90) contact for printed circuit. Rated current = 12A for receptacle with elbow (90) contact for printed circuit. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) oA Multicontact o A (mm) Solder Crimp Printed circuit (straight) Printed circuit (elbow) Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Test voltage (kV rms)1) Contact-contact 3B 3K 2 3.0 - 2.10 1.55 2.30 1.80 50.0 303 3 2.0 - 1.90 1.50 3.20 2.65 25.0 304 4 2.0 - 1.45 1.25 2.50 2.20 19.0 305 5 1.6 - 1.90 1.25 2.40 1.75 19.0 306 6 1.6 - 1.60 1.15 1.90 1.80 17.0 307 7 1.6 - 1.70 1.25 2.00 2.05 15.0 308 8 1.3 1.65 1.15 1.85 1.75 13.0 309 8 1 1.3 2.0 - 1.35 1.35 1.05 1.05 1.10 1.05 1.10 1.05 6.0 15.0 310 10 1.3 1.25 0.90 1.50 1.80 12.0 312 12 0.9 1.45 1.00 1.65 1.85 9.0 314 14 0.9 1.20 1.20 1.80 1.65 9.02) 316 16 0.9 1.20 0.85 1.80 1.50 8.0 318 18 0.9 1.20 1.05 1.85 1.60 7.0 320 20 0.7 1.00 0.90 1.35 1.55 6.0 322 22 0.7 1.00 0.90 1.70 1.45 5.5 324 24 0.7 0.95 0.80 1.35 1.35 4.0 326 26 0.7 0.95 0.70 1.50 1.30 4.0 330 30 0.7 0.80 0.70 1.35 1.20 3.5 First choice alternative Special order alternative Note: 1) 2) Rated current (A)1) Number of contacts Female crimp contacts Test voltage (kV rms)1) Contact-shell Reference Male crimp contacts Crimp contact 302 Female solder contacts oA Male solder contacts Solder contact Contact type See calculation method, caution and suggested standard on page 204. Rated current = 6A for receptacle with elbow (90) contact for printed circuit. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 57 (R) (R) oA Multicontact Number of contacts o A (mm) Solder Crimp Printed circuit (straight) Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Rated current (A)1) Female crimp contacts 4B 4K First choice alternative 58 Special order alternative Note: 1) Crimp contact Reference Male crimp contacts Solder contact 304 4 3.0 2.10 1.50 1.80 1.20 30.0 306 6 2.0 2.00 1.75 2.75 2.40 24.0 307 7 2.0 2.00 1.80 1.50 1.35 20.0 310 10 1.6 1.85 1.30 1.90 1.95 17.0 312 12 1.3 1.45 1.60 1.90 1.85 12.0 316 16 0.9 1.35 1.50 2.30 2.10 10.0 320 20 0.9 1.35 1.00 1.05 0.95 8.0 324 24 0.9 1.20 1.45 1.80 2.05 7.0 330 30 0.9 0.95 0.85 1.75 1.45 5.0 340 40 0.7 0.95 1.00 1.35 1.30 2.0 Female solder contacts oA Male solder contacts Contact type See calculation method, caution and suggested standard on page 204. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) oA Multicontact Number of contacts o A (mm) Solder Crimp Printed circuit (straight) Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Rated current (A)1) Female crimp contacts 5B 5K First choice alternative Special order alternative Note: 1) Crimp contact Reference Male crimp contacts Solder contact 302 2 6.0 - - 3.60 2.95 - - 50.0 304 4 4.0 2.95 2.65 3.20 2.40 35.0 310 10 3.0 2.35 2.30 2.65 3.20 20.0 314 14 2.0 2.35 2.00 2.85 2.95 18.0 316 16 2.0 1.85 1.95 2.45 3.05 12.0 320 20 1.6 1.90 1.70 2.20 2.40 10.0 330 30 1.3 1.45 1.60 2.05 2.45 8.0 340 40 1.3 1.30 1.45 2.00 1.95 7.0 348 48 1.3 1.20 1.10 2.00 1.55 6.0 350 50 0.9 1.30 1.60 1.20 1.45 6.0 354 54 0.9 1.15 1.55 2.00 2.10 5.0 364 64 0.9 1.30 1.55 1.35 1.85 3.0 Female solder contacts oA Male solder contacts Contact type See calculation method, caution and suggested standard on page 204. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 59 (R) (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Housings (B and K series) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Surface treatment Material Ref. C N K S T U L H G P P R X Brass Brass Brass Stainless steel Stainless steel Stainless steel1) Aluminium alloy2) PPS3)/brass PEEK4) PA.65) PSU6) PPSU7) Avional8) Note Latch sleeve and grounding crown Outer shell and collet nut chrome nickel black chrome without treatment without treatment without treatment anodized without treat./Ni without treatment without treatment without treatment without treatment nickel nickel nickel nickel nickel-plated brass stainless steel stainless steel nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brass nickel-plated brass @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Material Ref. L Y 2) @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Contacts for plugs, free or fixed receptacles A C B G L Male solder Male crimp (fig. 1)1) Male crimp (fig. 2)1) Male crimp (fig. 2)1) Female solder Ref. M P U N V Female crimp (fig. 1)1) Female crimp (fig. 2)1) Female crimp (fig. 2)1) Female straight printed circuit Female elbow printed circuit Contacts for couplers, plug with receptacle and bridge plug A C E Contact type Male - Female Male - Male Male - Male - Female Contacts (B and K series) Dimension of crimp barrels Contact Ref. contact type o A o C Form (mm) (mm) per fig. 0.5 0.7 0.9 1.3 Ref. Contact type 1.6 F L Female - Female - Male Female - Male 2.0 Note: The first contact type mentioned is always the one at the flange end. 60 Insulators (B and K series) Contact type Note: 1) There are two forms of crimp barrels. Please consult adjacent table for contact selection and the page 9. Ref. Special order alternative Note: Detailed characteristics of these materials are presented on page 201. For solder or printed circuit contacts. Only for crimp contacts. For the type 3B.309; 4B.304; 4B.307; 4B.320; 5B.304 and 5B.350, the reference shall be L instead of Y. @@ @@ @@ @@ @@ @@ @@ @@ Contact type First choice alternative 1) 2) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ Ref. Note: detailed characteristics of these materials and treatments are presented on page 198. 1) The other metallic parts are in stainless steel. 2) The variant position of the reference is used to specify the anodized color. 3) Only available for elbow (90) receptacles for printed circuit of the B and S series. 4) Only available for FGG and ENG models of the B series. 5) Only for CFF and CRG bridge plugs. 6) Only available for ENY and FGY models of the B series. For the color, see the variant position. 7) Only available for ENY and FGY models of the B series. 8) Anthracite color. Note 1) PEEK PEEK @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ 3.0 4.0 0.45 0.80 0.45 1.10 0.80 0.45 1.40 1.10 0.80 1.90 1.40 2.40 1.90 2.90 4.00 1 1 2 1 2 2 1 2 2 1 2 1 2 1 1 Male Female C C B C B G C B G C B C B C C M M P M P U M P U M P M P M M Conductor AWG Section (mm2) min. max. min. max. 32 26 32 24 26 32 20 24 26 18 22 16 18 14 12 28 22 28 20 22 28 18 20 22 14 18 12 14 10 10 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 0.035 0.140 0.035 0.250 0.140 0.035 0.500 0.250 0.140 1.000 0.340 1.500 1.000 2.500 4.000 0.09 0.34 0.09 0.50 0.34 0.09 1.00 0.50 0.34 1.50 1.00 2.50 1.50 4.00 6.00 (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ (R) Collets (B and K series) @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ oB oA D and M type collets Reference 00 0B 1B 2B 3B Collet o Cable o Part number of the reducer 2) Part number of the reducing cone 2) Part number of the collet nut Type o oA oB max. min. Part number of the collet 1) D D D D D 17 22 27 30 35 1.7 2.2 2.7 3.1 3.5 - - - 2.8 2.8 1.6 2.1 2.6 3.0 3.4 1.1 1.6 2.1 2.5 2.9 FGG.00.717.DN FGG.00.722.DN FGG.00.727.DN FGG.00.730.DN FGG.00.735.DN - - - - - - - - - - FGG.00.130.LC FGG.00.130.LC FGG.00.130.LC FGG.00.130.LC FGG.00.130.LC D D D D D 21 31 42 52 56 2.1 3.1 4.2 5.2 5.6 - - - 4.7 4.7 2.0 3.0 4.0 5.0 5.5 1.5 2.1 3.1 4.1 5.1 FGG.0B.721.DN FGG.0B.731.DN FGG.0B.742.DN FGG.0B.752.DN FGG.0B.756.DN 3) - - - - - - - - - - FGG.0B.130.LC FGG.0B.130.LC FGG.0B.130.LC FGG.0B.130.LC FGG.0B.132.LC M M D D D D D 27 31 42 52 62 72 76 2.7 3.1 4.2 5.2 6.2 7.2 7.6 - - - - - 6.7 6.7 2.6 3.0 4.0 5.0 6.0 7.0 7.5 2.2 2.6 3.1 4.1 5.1 6.1 7.1 FFC.00.727.CN FFC.00.731.CN FGG.1B.742.DN FGG.1B.752.DN FGG.1B.762.DN FGG.1B.772.DN FGG.1B.776.DN 3) FGG.1B.138.LN FGG.1B.138.LN - - - - FGG.1B.158.LN FGG.1B.158.LN - - - - - - FGG.1B.130.LC FGG.1B.130.LC FGG.1B.130.LC FGG.1B.130.LC FGG.1B.130.LC FGG.1B.130.LC FGG.1B.132.LC M M M D D D D D D 21 31 42 52 62 72 82 92 99 2.1 3.1 4.2 5.2 6.2 7.2 8.2 9.2 9.9 - - - - - - - 8.6 8.6 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 9.7 1.5 2.1 3.1 4.1 5.1 6.1 7.1 8.1 9.1 FGG.0B.721.DN FGG.0B.731.DN FGG.0B.742.DN FGG.2B.752.DN FGG.2B.762.DN FGG.2B.772.DN FGG.2B.782.DN FGG.2B.792.DN FGG.2B.799.DN 3) FGG.2B.138.LN FGG.2B.138.LN FGG.2B.138.LN - - - - - - FGG.2B.158.LN FGG.2B.158.LN FGG.2B.158.LN - - - - - - FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.130.LC FGG.2B.132.LC M D D D D D D D 52 62 72 82 92 10 11 12 5.2 6.2 7.2 8.2 9.2 10.2 11.2 11.9 - - - - - - 10.2 10.2 5.0 6.0 7.0 8.0 9.0 10.0 11.0 11.7 4.1 5.1 6.1 7.1 8.1 9.1 10.1 11.1 FGG.1B.752.DN FGG.3B.762.DN FGG.3B.772.DN FGG.3B.782.DN FGG.3B.792.DN FGG.3B.710.DN FGG.3B.711.DN FGG.3B.712.DN 3) FGG.3B.138.LN - - - - - - - FGG.3B.158.LN - - - - - - - FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.130.LC FGG.3B.132.LC Note: 1) For ordering collets separately. 2) For ordering an M type collet, a reducer and its reducing cone should also be ordered. 3) These collets cannot be used for connector models with nut for fitting a bend relief. All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 61 (R) (R) oB oA D and M type collets Reference 4B 5B Collet o Cable o Part number of the collet 1) Part number of the reducer 2) Part number of the reducing cone 2) Part number of the collet nut Type o oA oB max. min. M M M M D D D D D 62 72 82 92 10 12 13 15 16 6.2 7.2 8.2 9.2 10.8 12.3 13.8 15.3 16.3 - - - 8.6 - - 12.5 12.5 12.5 6.0 7.0 8.0 9.0 10.5 12.0 13.5 15.0 16.0 5.1 6.1 7.1 8.1 9.1 10.6 12.1 13.6 15.1 FGG.2B.762.DN FGG.2B.772.DN FGG.2B.782.DN FGG.2B.792.DN FGG.4B.710.DN FGG.4B.712.DN FGG.4B.713.DN FGG.4B.715.DN FGG.4B.716.DN 3) FGG.4B.138.LN FGG.4B.138.LN FGG.4B.138.LN FGG.4B.138.LN - - - - - FGG.4B.158.LN FGG.4B.158.LN FGG.4B.158.LN FGG.4B.158.LN - - - - - FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.130.LC FGG.4B.132.LC D D D D D D D D 11 13 15 17 19 21 23 25 11.8 13.8 15.8 17.8 19.8 21.8 23.8 25.3 - - - - - - 21.8 21.8 11.5 13.5 15.5 17.5 19.5 21.5 23.5 25.0 9.6 11.6 13.6 15.6 17.6 19.6 21.6 23.6 FGG.5B.711.DN FGG.5B.713.DN FGG.5B.715.DN FGG.5B.717.DN 3) FGG.5B.719.DN 3) FGG.5B.721.DN 3) FGG.5B.723.DN 3) FGG.5B.725.DN 3) - - - - - - - - - - - - - - - - FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.130.LC FGG.5B.132.LC Note: 1) For ordering collet separately. 2) For ordering an M type collet, a reducer and its reducing cone should also be ordered. 3) These collets cannot be used for connector models with collet nut for fitting a bend relief. Bend relief collet nut and bend relief Reference Part number of the collet nut Bend relief to be used 1) 17 to 35 FFM.00.131.LC GMA.00.. GMB.00.. D 21 to 52 FFM.0B.130.LC GMA.0B.. M D 27 and 31 42 to 72 FFM.1B.130.LC FFM.1B.130.LC GMA.1B.. GMA.1B.. M M D 21 and 31 42 52 to 92 FFM.2B.132.LC FFM.2B.130.LC FFM.2B.130.LC GMA.0B.. GMA.2B.. GMA.2B.. M D 52 62 to 11 FFM.3B.131.LC FFM.3B.130.LC GMA.1B.. GMA.3B.. M M D 62 and 72 82 and 92 10 to 15 FFM.4B.132.LC FFM.4B.130.LC FFM.4B.130.LC GMA.2B.. GMA.4B.. GMA.4B.. D 11 to 15 FFM.5B.130.LC GMA.4B.. Type o 00 D 0B 1B 2B 3B 4B 5B Note: 1) The bend relief is to be ordered separately (see pages 175 and 176). All dimensions are in millimeters. 62 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) oB oA C and K type collets Reference 0K 1K 2K Collet o Cable o Type o oA oB max. min. Part number of the collet system 1) Part number of the oversize collet and of the two split center-pieces 2) Part number of the collet nut 2) C C C C C C C C C 10 15 20 25 30 35 40 45 50 1.6 1.6 2.1 3.1 3.1 4.2 4.2 5.2 5.2 - - - - - 4.2 4.2 5.2 5.2 1.2 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1.0 1.3 1.6 2.1 2.6 3.1 3.6 4.1 4.6 FFA.0E.710.CNS FFA.0E.715.CNS FFA.0E.720.CNS FFA.0E.725.CNS FFA.0E.730.CNS FFA.0E.735.CNS FFA.0E.740.CNS FFA.0E.745.CNS FFA.0E.750.CNS - - - - - - - - - FFA.0E.130.LC FFA.0E.130.LC FFA.0E.130.LC FFA.0E.130.LC FFA.0E.130.LC FFA.0E.130.LC FFA.0E.130.LC FFA.0E.130.LC FFA.0E.130.LC C C C C C C C C C C C K K K K 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 1.6 2.2 3.2 3.2 4.2 4.2 5.2 5.2 6.2 6.2 7.2 7.2 8.2 8.2 9.2 - - - - - - - - 6.2 6.2 6.7 - 8.2 8.2 8.6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 1.3 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 FFA.1E.715.CNS FFA.1E.720.CNS FFA.1E.725.CNS FFA.1E.730.CNS FFA.1E.735.CNS FFA.1E.740.CNS FFA.1E.745.CNS FFA.1E.750.CNS FFA.1E.755.CNS FFA.1E.760.CNS FFA.1E.765.CNS FFA.2E.770.CNS FFA.2E.775.CNS FFA.2E.780.CNS FFA.2E.785.CNS - - - - - - - - - - - FFA.1K.137.LCN FFA.1K.137.LCN FFA.1K.137.LCN FFA.1K.137.LCN FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.2E.130.LC 2) FFA.2E.130.LC 2) FFA.2E.130.LC 2) FFA.2E.130.LC 2) C C C C C C C C C C C C C C C K K K K 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 10 11 2.2 2.2 3.2 3.2 4.2 4.2 5.2 5.2 6.2 6.2 7.2 7.2 8.2 8.2 9.2 9.2 10.2 10.2 11.2 - - - - - - - - - - - - 8.2 8.2 8.6 - 10.2 10.2 10.6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 11.0 1.3 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 10.1 FFA.2E.715.CNS FFA.2E.720.CNS FFA.2E.725.CNS FFA.2E.730.CNS FFA.2E.735.CNS FFA.2E.740.CNS FFA.2E.745.CNS FFA.2E.750.CNS FFA.2E.755.CNS FFA.2E.760.CNS FFA.2E.765.CNS FFA.2E.770.CNS FFA.2E.775.CNS FFA.2E.780.CNS FFA.2E.785.CNS FFA.3E.790.CNS FFA.3E.795.CNS FFA.3E.710.CNS FFA.3E.711.CNS - - - - - - - - - - - - - - - FFA.2K.137.LCN FFA.2K.137.LCN FFA.2K.137.LCN FFA.2K.137.LCN FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.3E.130.LC 2) FFA.3E.130.LC 2) FFA.3E.130.LC 2) FFA.3E.130.LC 2) Note: 1) For ordering the collet system separately. 2) For ordering the K type collet, the oversize collet and the split center-pieces, as well as the corresponding collet nut should also be ordered. All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 63 (R) (R) oB oA C and K type collets Reference 3K 4K Collet o Cable o Type o oA oB max. min. Part number of the collet system 1) Part number of the oversize collet and of the two split center-pieces 2) Part number of the collet nut 2) C C C C C C C C C C C C C C C C K K K K K 30 35 40 45 50 55 60 65 70 75 80 85 90 95 10 11 11 12 13 14 15 3.2 4.2 4.2 5.2 5.2 6.2 6.2 7.2 7.2 8.2 8.2 9.2 9.2 10.2 10.2 11.2 12.3 13.8 13.8 15.3 15.3 - - - - - - - - - - - - - 10.2 10.2 11.2 - 13.8 13.8 15.3 15.3 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 12.0 12.8 13.5 14.0 15.0 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 10.1 10.6 12.1 12.9 13.6 14.1 FFA.3E.730.CNS FFA.3E.735.CNS FFA.3E.740.CNS FFA.3E.745.CNS FFA.3E.750.CNS FFA.3E.755.CNS FFA.3E.760.CNS FFA.3E.765.CNS FFA.3E.770.CNS FFA.3E.775.CNS FFA.3E.780.CNS FFA.3E.785.CNS FFA.3E.790.CNS FFA.3E.795.CNS FFA.3E.710.CNS FFA.3E.711.CNS FFA.4E.711.CNS FFA.4E.712.CNS FFA.4E.713.CNS FFA.4E.714.CNS FFA.4E.715.CNS - - - - - - - - - - - - - - - - FFA.3K.137.LCN FFA.3K.137.LCN FFA.3K.137.LCN FFA.3K.137.LCN FFA.3K.137.LCN FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.4E.130.LC 2) FFA.4E.130.LC 2) FFA.4E.130.LC 2) FFA.4E.130.LC 2) FFA.4E.130.LC 2) C C C C C C C C C C C C C C C C K K K K K K K K 50 55 60 65 70 75 80 85 90 95 10 11 12 13 14 15 16 17 18 19 20 21 22 23 6.3 6.3 6.3 7.3 7.3 8.3 8.3 9.3 9.3 10.8 10.8 12.3 13.8 13.8 15.3 15.3 17.8 17.8 19.8 19.8 21.8 21.8 23.8 23.8 - - - - - - - - - - - - 13.8 13.8 15.3 15.3 - - - - - - 23.8 23.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.5 12.0 12.8 13.5 14.0 15.0 16.5 17.5 18.5 19.5 20.5 21.5 22.5 23.5 4.8 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 10.6 12.1 12.9 13.6 14.1 15.6 16.6 17.6 18.6 19.6 20.6 21.6 22.6 FFA.4E.750.CNS FFA.4E.755.CNS FFA.4E.760.CNS FFA.4E.765.CNS FFA.4E.770.CNS FFA.4E.775.CNS FFA.4E.780.CNS FFA.4E.785.CNS FFA.4E.790.CNS FFA.4E.795.CNS FFA.4E.710.CNS FFA.4E.711.CNS FFA.4E.712.CNS FFA.4E.713.CNS FFA.4E.714.CNS FFA.4E.715.CNS FFA.4K.716.CNS FFA.4K.717.CNS FFA.4K.718.CNS FFA.4K.719.CNS FFA.4K.720.CNS FFA.4K.721.CNS FFA.4K.722.CNS FFA.4K.723.CNS - - - - - - - - - - - - - - - - FFA.4K.137.LCN 3) FFA.4K.137.LCN FFA.4K.137.LCN FFA.4K.137.LCN FFA.4K.137.LCN FFA.4K.137.LCN FFA.4K.137.LCN FFA.4K.137.LCN FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4K.136.LC 2) FFA.4K.136.LC 2) FFA.4K.136.LC 2) FFA.4K.136.LC 2) FFA.4K.136.LC 2) FFA.4K.136.LC 2) FFA.4K.136.LC 2) FFA.4K.136.LC 2) Note: 1) For ordering the collet system separately. 2) For ordering the K type collet, the oversize collet and the split center-pieces, as well as the corresponding collet nut should also be ordered. 3) In 4K series, the center-piece is made of one piece. All dimensions are in millimeters. 64 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Reference 5K Collet o Cable o oA oB C type collets Type o oA oB max. min. Part number of the collet system 1) Part number of the collet nut C C C C C C C C C C C C C C 10 11 12 13 14 15 16 17 18 19 20 21 22 23 11.8 11.8 13.8 13.8 15.8 15.8 17.8 17.8 19.8 19.8 21.8 21.8 23.8 23.8 - - - - - - - - - - - - 23.8 23.8 10.5 11.5 12.5 13.5 14.5 15.5 16.5 17.5 18.5 19.5 20.5 21.5 22.5 23.5 9.6 10.6 11.6 12.6 13.6 14.6 15.6 16.6 17.6 18.6 19.6 20.6 21.6 22.6 FFA.5K.710.CNS FFA.5K.711.CNS FFA.5K.712.CNS FFA.5K.713.CNS FFA.5K.714.CNS FFA.5K.715.CNS FFA.5K.716.CNS FFA.5K.717.CNS FFA.5K.718.CNS FFA.5K.719.CNS FFA.5K.720.CNS FFA.5K.721.CNS FFA.5K.722.CNS FFA.5K.723.CNS FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC Note: 1) For ordering the collet system separately. Bend relief collet nut and bend relief Reference Part number of the collet nut Bend relief to be used 1) Type o 0K C 10 to 50 FFM.0E.130.LC GMA.0B.. 1K C K 15 to 65 70 to 85 FFM.1E.130.LC FFM.2E.130.LC GMA.1B.. GMA.2B.. 2K C K 15 to 85 90 to 11 FFM.2E.130.LC FFM.3E.130.LC GMA.2B.. GMA.3B.. 3K C K 30 to 10 11 to 15 FFM.3E.130.LC FFM.4E.130.LC GMA.3B.. GMA.4B.. 4K C 50 to 15 FFM.4E.130.LC GMA.4B.. Note: 1) The bend relief is to be ordered separately (see pages 175 and 176). All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 65 (R) (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Variant (B and K series) @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Color of the bridge plug shells and connectors shell made of plastic material Anodized color The variant position of the reference is used to specify the color of the shell according to the table below. The variant position of the reference is used to specify the anodized color according to the table below. Ref. A B1) G1) Color blue white grey Ref. J M N Color yellow brown black Ref. R S V Color red orange green Note: 1) PSU connector shells are only available in white or grey colors. The variant position is also used to indicate epoxy filling of watertight and vacumm-tight receptacle models, the reference P is used. Part number for connector with standard collet nut Ref. A J N Anodized color blue yellow black Ref. R T V Anodized color red natural green Part number for connector with collet nut for bend relief Ref. L X Anodized color black natural Note: Other anodizing colors are available for connectors with collet nut for bend relief. Please consult us. 66 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com E SERIES (watertight) S SERIES (R) 68 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) S series S series connectors have main features as follows: - security of the Push-Pull self-latching system - single contact types transmitting current up to 230 A and multicontact types with up to 106 contacts - solder or printed circuit contacts (straight or elbow) - polarization by stepped insert (half-moon) fitted with male and female contacts - 360 screening for full EMC shielding - wide range of models satisfying most applications. Interconnections Straight plugs Straight plugs FFF Fixed receptacles Free receptacles FFA, FFP ERA EBC PCA, PCP FFS FFA ERN ERT PCA FZP FFA, FFP ERC EEP PCA, PCP FFB ERS ERD PZP Fixed plug Fixed receptacles FAA Elbow plugs FFE EHP ERY PSA, PSP FLA FFL EBD ECP PSS EBS ECP FLS Fixed receptacles with microswitch ECP Plastic housing models Straight plugs EMD Fixed receptacle Elbow receptacles ERM EPL FFA, FFP ERZ FFP ERN EXP Plug with resistor Free coupler FFL FRT Watertight or vacuum-tight models RMA Fixed receptacles Fixed coupler Fixed coupler T-plug FTA RAD HGP EWB SWH Straight coupler with two plugs FTR HCP HGW FEF LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 69 (R) (R) Model Description EBC Fixed receptacle with square flange, protruding shell and screw fixing EBD Fixed receptacle with square flange and screw fixing EBS Fixed receptacle with round flange and screw fixing ECP Fixed receptacle with two nuts, long threaded shell (back panel mounting) ECP Fixed receptacle with two nuts, long threaded shell, with straight contact for printed circuit (back panel mounting) ECP Fixed receptacle with two nuts, long threaded shell, with elbow (90) contacts for printed circuit (back panel mounting) EEP Fixed receptacle, nut fixing (back panel mounting) EHP Fixed receptacle, nut fixing, protruding shell EMD Fixed receptacle with two nuts and microswitch (back panel mounting) EPL Elbow (90) receptacle for printed circuit ERA Fixed receptacle, nut fixing ERC Fixed receptacle, nut fixing with slot in the flange ERD Fixed receptacle with two nuts (back panel mounting) ERM Fixed receptacle, nut fixing with microswitch ERN Fixed receptacle, nut fixing, with grounding tab ERN Fixed receptacle, nut fixing, with grounding tab, PEEK or POM outer shell ERS Fixed receptacle, nut fixing, long threaded shell, without flats ERT Fixed receptacle, force fit, with grounding tab ERY Fixed receptacle, protruding shell, screw fixing on the panel (back panel mounting) ERZ Fixed receptacle, nut fixing with double microswitch and printed circuit contacts EWB Fixed receptacle, nut fixing, with two flats on the flange, watertight or vacuum-tight EXP Elbow (90) receptacle for printed circuit with two nuts (back panel mounting) FAA Fixed plug non-latching, nut fixing FEF Straight coupler with two plugs and front seal FFA Straight plug, cable collet FFA Straight plug with oversize cable collet FFA Straight plug, cable collet and nut for fitting a bend relief FFA Straight plug, cable collet, PEEK or POM outer shell FFB Straight plug, cable collet and safety locking ring FFE Straight plug, cable collet, front seal and nut for fitting a bend relief FFF Straight plug, non-latching, cable collet FFL Straight plug, flats on latch sleeve, cable collet and inner anti-rotating device FFL Straight plug, cable collet, with PSU and PPSU outer shell, inner anti-rotating device and nut for fitting a bend relief FFP Straight plug, cable collet and inner anti-rotating device FFP Straight plug, cable collet and inner anti-rotating device and nut for fitting a bend relief FFP Straight plug, cable collet, PEEK or POM outer shell and inner anti-rotating device FFP Straight plug, cable collet, PEEK or POM outer shell, inner anti-rotating device and nut for fitting a bend relief FFS Straight plug for cable crimping FLA Elbow (90) plug, cable collet FLS FRT FTA FTR FZP Elbow (90) plug for cable crimping Straight plug with resistor T-plug with two in line receptacles Elbow (90) plug with receptacle Straight plug for remote handling, cable collet and inner anti-rotating device HCP Fixed receptacle, nut fixing, watertight or vacuum-tight (back panel mounting) HGP Fixed receptacle, nut fixing, watertight or vacuum-tight HGW Fixed receptacle, nut fixing, with back washer, watertight or vacuum-tight PCA Free receptacle, cable collet PCA Free receptacle, with oversize cable collet PCA Free receptacle, cable collet and nut for fitting a bend relief PCP Free receptacle, cable collet and inner anti-rotating device PCP Free receptacle, cable collet and inner anti-rotating device and nut for fitting a bend relief PSA Fixed receptacle, nut fixing, cable collet PSP Fixed receptacle, nut fixing, cable collet and inner anti-rotating device PSS Free receptacle, nut fixing for cable crimping PZP Free receptacle for remote handling, cable collet and inner anti-rotating device RAD Fixed coupler, nut fixing RMA Free coupler SWH Fixed coupler, nut fixing, watertight or vacuum-tight Part Section Showing Internal Components Straight plug Fixed receptacle 2 6 3 1 4 5 8 7 1 7 6 5 4 2 8 3 1 outer shell 1 outer shell 2 grounding crown 2 latch sleeve 3 retaining ring 3 collet nut 4 hexagonal nut 4 center-piece 5 locking washer 5 insulator 6 insulator 6 male contact 7 male contact 7 female contact 8 collet 8 female contact Technical Characteristics Mechanical and Climatic Characteristics Endurance Humidity Temperature range1) Resistance to vibrations Shock resistance Salt spray corrosion test Protection index (mated) Climatic category1) 70 Electrical Value Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F -67 F, +482 F 10-2000 Hz, 15 g IEC 60512-4 test 6d 100 g, 6 ms IEC 60512-4 test 6c > 144h IEC 60512-6 test 11f IP 50 IEC 60529 55/175/21 IEC 60068-1 Characteristics Shielding efficiency at 10 MHz at 1 GHz Value > 75 dB > 40 dB Standard IEC 60169-1-3 IEC 60169-1-3 Note: The various tests have been carried out with FFA and ERA connector pairs, with chrome-plated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 197. 1) For watertight or vacuum-tight models: see page 88. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Available Models (series and types) Model EBC EBD EBS ECP ECP 1) EEP EHP EMD EPL ERA ERC ERD ERM ERN ERN 2) ERS ERT ERY ERZ EWB EXP FAA FEF FFA FFA 3) FFA 4) FFA 6) FFB FFE Single contact Multicontact 00 0S 1S 2S 3S 4S 5S 0S 1S 2S 3S 4S 5S 6S Model FFF FFL FFL 5) FFP FFP 4) FFP 2) FFP 6) FFS FLA FLS FRT FTA FTR FZP HCP HGP HGW PCA PCA 3) PCA 4) PCP PCP 4) PSA PSP PSS PZP RAD RMA SWH Single contact Multicontact 00 0S 1S 2S 3S 4S 5S 0S 1S 2S 3S 4S 5S 6S Note: 1) With elbow (90) printed circuit contact. 2) With PEEK or POM outer shell. 3) With oversize collet. 4) With nut for fitting a bend relief. 5) With PSU outer shell. 6) With PEEK or POM outer shell. = available models by series and types LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 71 (R) (R) Part Number Example Straight plug with cable collet FFA 0S 303 C L A C 32 Model: (page 73) Series: (page 73) Variant: see note 1) Type: (page 103) Cable o: (page 113) Housing: (page 111) Cable fixing type: (page 113) Insulator: (page 111) Contact: (page 111) FFA.0S.303.CLAC32 = straight plug with cable collet, 0S series, multicontact type with three contacts, outer shell in chromeplated brass, PEEK insulator, two male and one female solder contacts, C type collet for a 3.2 mm diameter cable. Fixed receptacle ERA 2S 140 C T L Model: (page 76) Series: (page 76) Variant: see note 1) Type: (page 103) Contact: (page 111) Housing: (page 111) Insulator: (page 111) ERA.2S.140.CTL = fixed receptacle, nut fixing, 2S series, single contact type o 4.0 mm contacts, chrome-plated brass outer shell, PTFE insulator, female solder contact. Fixed coupler RAD 4S 308 C L L Model: (page 85) Series: (page 85) Variant: see note 1) Type: (page 103) Contact: (page 111 and 112) Housing: (page 111) Insulator: (page 111) RAD.4S.308.CLL = straight coupler, nut fixing, 4S series, multicontact type with eight contacts, chrome-plated brass outer shell, PEEK insulator, four female and four male contacts each end. Note: 1) The Variant position of the part number is used to specify either the presence of a nut for fitting a bend relief, or the anodized color of the aluminium housings or the color of housings using plastic material. For models with collet nut for fitting a bend relief, a Z should be indicated and a bend relief can be ordered separately as indicated in the Accessories section. An order for a connector with bend relief should thus include two part numbers. For the various housings available in colors, the corresponding letter in the part number for the color is indicated on page 124. For the watertight models of receptacle, the letter P is used; for the vacuum-tight models of receptacle the letters PV shall be indicated. 72 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ (R) Models - Series @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ FFA Straight plug, cable collet Reference ~L oA ~M S2 Model Series FFA FFA FFA FFA FFA FFA FFA FFA 00 0S 1S 2S 3S 4S 5S 6S Dimensions (mm) A L M 6.4 26.0 18.0 9.0 34.5 24.5 12.0 42.5 31.5 14.8 52.0 40.0 17.8 61.0 46.0 24.8 77.0 59.0 35.1 103.0 78.0 46.0 106.0 81.0 S2 4.5 6.5 8.5 11.0 14.0 19.0 29.0 38.0 FFA Straight plug with oversize cable collet Reference ~L oB oA ~M S2 S1 Dimensions (mm) Model Series A FFA FFA FFA FFA FFA FFA FFA 00 0S 1S 2S 3S 4S 5S 6.4 9.0 12.0 14.8 17.8 24.8 35.1 B L M 8.0 34.0 26.0 10.0 45.5 35.5 13.0 57.0 46.0 18.0 67.0 55.0 21.0 85.0 70.0 31.8 107.0 89.0 41.8 138.0 113.0 S1 S2 7.0 9.0 12.0 14.0 19.0 28.5 37.5 6.5 8.5 11.0 14.0 19.0 29.0 38.0 Note: The fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up. FFA Straight plug, cable collet and nut for fitting a bend relief Reference ~L oA ~M Dimensions (mm) Model Series A L M S2 FFA FFA FFA FFA FFA FFA 00 0S 1S 2S 3S 4S 6.4 9.0 12.0 14.8 17.8 24.8 26.0 34.5 42.5 52.0 61.0 77.0 18.0 24.5 31.5 40.0 46.0 59.0 6 7 9 12 14 20 S2 Note: The bend relief must be ordered separately (see page 175). FFP Straight plug, cable collet and inner anti-rotating device Reference ~L oA ~M Dimensions (mm) Model Series A L FFP FFP FFP FFP FFP 0S 1S 2S 3S 4S 9.0 12.0 14.8 17.8 24.8 34.5 42.5 52.0 61.0 77.0 M S2 24.5 6.5 31.5 8.5 40.0 11.0 46.0 14.0 59.0 19.0 S2 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 73 (R) (R) FFB Straight plug, cable collet and safety locking ring Reference ~L oA ~M Dimensions (mm) Model Series A L FFB FFB FFB FFB 0S 1S 2S 3S 9.0 12.0 14.8 17.8 36.8 45.0 55.5 65.0 M S2 26.8 6.5 34.0 8.5 43.5 11.0 50.0 14.0 Note: Not available with nut for fitting a bend relief. S2 FFE Straight plug, cable collet, front seal and nut for fitting a bend relief (protected to IP54 when mated) Reference ~L oA ~M Dimensions (mm) Model Series A L M S2 FFE FFE FFE FFE FFE 00 0S 1S 2S 3S 7.4 10.0 13.0 16.0 19.0 26.0 34.5 42.5 52.0 61.0 18.0 24.5 31.5 40.0 46.0 6 7 9 12 14 Note: The bend relief must be ordered separately (see page 175). S2 FFL Straight plug, flats on latch sleeve, cable collet and inner anti-rotating device Reference ~L oA ~M S2 Model Series FFL 2S Dimensions (mm) A L M 15.0 49.0 37.0 S1 S2 13 12 Note: This model is fitted with a D or M type collet system (see page 206). It is also adapted for crimp contacts. S1 FFF Straight plug, non-latching, cable collet Reference ~L oA ~M Dimensions (mm) Model Series A L FFF FFF FFF FFF 00 0S 1S 2S 6.4 9.0 12.0 14.8 26.0 34.5 42.5 52.0 M S2 18.0 4.5 24.5 6.5 31.5 8.5 40.0 11.0 S2 74 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) FFS Straight plug for cable crimping Reference Dimensions (mm) L Model Series A L M S1 S2 FFS 00 6.4 31 23 5.5 5.5 oA M S1 S2 FZP Straight plug for remote handling, cable collet and inner anti-rotating device Reference ~L oA ~M S2 N Dimensions (mm) Model Series A L M N S2 S3 FZP FZP FZP FZP FZP FZP 1S 2S 3S 4S 5S 6S 16 24 24 35 43 60 42.5 52.0 61.0 77.0 103.0 106.0 31.5 40.0 46.0 59.0 78.0 81.0 15 21 24 30 44 44 8.5 11.0 14.0 19.0 29.0 38.0 12 18 18 28 35 50 S3 FAA Fixed plug non-latching, nut fixing Reference L maxi oA M e oB S3 S1 E maxi Dimensions (mm) Model Series A B e E L L1) M S1 S3 FAA FAA FAA FAA FAA FAA FAA FAA 00 0S 1S 2S 3S 4S 5S 6S 8 10 14 18 22 28 40 54 10.3 12.5 16.0 19.5 25.2 32.0 40.0 54.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 M48x1.5 2.0 2.0 2.5 4.0 4.0 2.5 2.5 2.5 - 18.5 22.5 25.0 31.0 35.5 45.0 45.0 15.5 18.0 21.7 25.3 29.0 39.0 - - 9.0 11.2 12.5 13.8 17.0 20.5 28.0 28.0 6.3 8.2 10.5 13.5 16.5 23.5 33.5 - 9 11 14 17 22 30 - - Panel cut-out: P1 Panel cut-out: P2 6S series Note: 1) Single contact model. FLA Elbow (90) plug, cable collet Reference L M A A1 ~H S1 S2 fig. 1 fig. 2 Dimensions (mm) Model Series A A1 H L M S1 S2 FLA FLA FLA FLA FLA FLA FLA FLA 00 0S 1S 2S 3S 4S 5S 6S 9 13 16 20 21 28 - - - 13 16 20 21 28 37 48 16.0 24.5 28.5 37.0 44.0 56.0 76.5 94.0 17.5 23.0 26.5 31.0 38.5 49.0 65.0 81.0 9.5 13.0 15.5 19.0 23.5 31.0 40.0 56.0 - 8 10 13 15 20 30 40 4.5 6.5 8.5 11.0 14.0 19.0 29.0 38.0 Note: Fig. 1 is used for the single contact type, fig. 2 is used for the multicontact type. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 75 (R) (R) FLS Elbow (90) plug for cable crimping L A M Reference Dimensions (mm) Series A H L M FLS 00 9 16 17.5 9.5 H Model ERA Fixed receptacle, nut fixing Reference Dimensions (mm) Model Series A B e E L L1) M S1 S3 ERA ERA ERA ERA ERA ERA ERA ERA 00 0S 1S 2S 3S 4S 5S 6S 8 10 14 18 22 28 40 54 10.3 12.5 16.0 19.5 25.2 32.0 40.0 54.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 M48x1.5 5.5 7.0 7.5 8.5 11.5 12.0 15.5 16.0 - 17.5 20.2 24.5 29.0 34.0 45.0 45.0 15.2 18.5 21.5 26.0 30.0 36.0 78.5 - 1.0 1.2 1.5 1.8 2.0 2.5 3.0 3.5 6.3 8.2 10.5 13.5 16.5 23.5 33.5 45.5 9 11 14 17 22 30 - - L maxi M oA e oB S3 E maxi S1 Note: 1) Single contact model. Panel cut-out: P1 Note: The 5S series is delivered with a tapered washer and a round nut. The 6S series is delivered without a locking washer and with a round nut. ERN Fixed receptacle, nut fixing, with grounding tab L maxi oA e oB Reference M S3 E maxi S1 Dimensions (mm) Model Series A B ERN ERN ERN ERN 0S 1S 2S 3S 10 14 18 22 12.5 16.0 19.5 25.2 e L L1) 19.3 23.0 26.3 29.8 19.3 23.0 26.3 30.0 E M9x0.6 7.0 M12x1.0 7.5 M15x1.0 8.5 M18x1.0 11.5 M S1 S3 1.2 8.2 11 1.5 10.5 14 1.8 13.5 17 2.0 16.5 22 Panel cut-out: P1 Note: 1) Single contact model. ERC Fixed receptacle, nut fixing with slot in the flange L maxi Reference F M E maxi oA e oB S3 Model Series ERC ERC ERC 00 0S 1S Dimensions (mm) A B e E F L L1) S1 S3 8 10.3 M7x0.5 5.5 1.6 - 15.1 1.0 6.3 9 10 12.5 M9x0.6 7.0 2.0 17.5 18.5 1.2 8.2 11 14 16.0 M12x1.0 7.5 2.5 20.2 21.5 1.5 10.5 14 S1 Panel cut-out: P1 Note: 1) Single contact model. 76 M LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) ERS Fixed receptacle, nut fixing, long threaded shell, without flats L maxi M Reference oA e oB S3 Model Series ERS 0S Dimensions (mm) A B e E L1) L M S3 10 12.5 M9x0.6 10.5 17.5 18.5 1.2 11 Panel cut-out: P2 E maxi Note: 1) Single contact model. EHP Fixed receptacle, nut fixing, protruding shell L maxi Reference oA M e oB S3 E maxi Model Series EHP EHP EHP 0S 1S 3S Dimensions (mm) A B e E L1) L M S1 S3 10 12.5 M9x0.6 2.5 17.5 18.5 12.5 8.2 11 14 16.0 M12x1.0 3.5 20.2 21.5 12.0 - 14 22 25.2 M18x1.0 4.0 29.0 30.0 18.7 - 22 S1 Panel cut-out: P2 Panel cut-out: P1 0S series Note: 1) Single contact model. EBD Fixed receptacle with square flange and screw fixing L maxi A M H oB Reference Dimensions (mm) Model Series A B C EBD 2S 22 15 3.2 L1) M 26 2 L1) M 12.4 20.2 21.5 1.5 H L 15.5 24.5 Panel cut-out: P6 oC Note: 1) Single contact model. EBS Fixed receptacle with round flange and screw fixing L maxi M H oA oB Reference Dimensions (mm) Model Series A B C EBS 1S 22 11 2.5 H L Panel cut-out: P7 oC Note: 1) Single contact model. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 77 (R) (R) EBC Fixed receptacle with square flange, protruding shell and screw fixing Reference A L maxi M oB H oC Dimensions (mm) Model Series A B C H L L1) M N EBC EBC EBC EBC 1S 2S 3S 5S 18 22 25 45 11.5 15.0 18.0 40.0 3.2 3.2 3.2 4.3 12.7 15.5 18.0 36.8 20.2 24.5 29.0 45.0 21.5 26.0 30.0 53.5 16.5 18.5 23.5 15.0 2.8 4.4 3.0 4.0 Panel cut-out: P6 Note: 1) Single contact model. N ERT Fixed receptacle, force fit, with grounding tab L maxi M oA oB Reference E Model Series ERT 1S Dimensions (mm) A B E 14 11.98 L 3.5 L1) M 20.2 21.5 1.5 Panel cut-out: P5 Note: 1) Single contact model. EEP Fixed receptacle, nut fixing (back panel mounting) L maxi P M oA Reference e oB S2 S1 Model Series EEP 2S Dimensions (mm) A B e E L 20 19.5 M15x1.0 3.5 24.5 L1) M P 26 3.5 9 S1 13.5 15 Panel cut-out: P1 E maxi Note: 1) Single contact model. ERD Fixed receptacle with two nuts (back panel mounting) Reference L maxi S 1 E maxi oA M e oB S3 Dimensions (mm) Model Series A B e E L L1) M S1 S3 ERD ERD ERD ERD ERD 0S 1S 2S 3S 4S 12 16 20 24 30 12.5 16.0 19.5 25.2 32.0 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 5.5 6.0 6.5 9.0 10.0 17.5 20.2 24.5 29.0 34.0 18.5 21.5 26.0 30.0 36.0 2.5 3.5 3.5 4.5 4.5 8.2 10.5 13.5 16.5 23.5 11 14 17 22 30 Panel cut-out: P1 Note: 1) Single contact model. The 3S and 4S series are delivered with a conical nut. 78 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com S2 (R) (R) ERY Fixed receptacle, protruding shell, screw fixing on the panel (back panel mounting) L maxi S1 M S3 Model Series ERY 2S Dimensions (mm) A B e E L L1) M 6 24.5 26 3.1 13.5 S1 S3 e oA oB Reference 13.5 19.5 M15x1.0 17 Panel cut-out: P1 E maxi Note: 1) Single contact model. ECP Fixed receptacle with two nuts, long threaded shell (back panel mounting) L maxi Reference e oA oB S1 Dimensions (mm) M S3 Model Series A ECP ECP ECP ECP 0S 1S 2S 3S 12 16 20 24 B e E L 12.5 M9x0.6 8.5 17.5 16.0 M12x1.0 10.0 20.2 19.5 M15x1.0 11.0 24.5 25.2 M18x1.0 14.0 29.0 L1) 18.5 21.5 26.0 30.0 M S1 2.5 8.2 3.5 10.5 3.5 13.5 4.5 16.5 S3 11 14 17 22 E maxi Panel cut-out: P1 Note: 1) Single contact model. The 3S series is delivered with a conical nut. ECP Fixed receptacle with two nuts, long threaded shell, with straight contact for printed circuit (back panel mounting) L Reference N e oB oA M S3 S1 E maxi Dimensions (mm) Model Series A ECP ECP ECP ECP 0S 1S 2S 3S 12 16 20 24 B e E M 12.5 M9x0.6 8.5 2.5 16.0 M12x1.0 10.0 3.5 19.5 M15x1.0 11.0 3.5 25.2 M18x1.0 14.0 4.5 N S1 15.0 8.2 17.5 10.5 20.0 13.5 24.0 16.5 Panel cut-out: P1 S3 11 14 17 22 PCB drilling pattern: P21 Note: This contact type is available for all E receptacle models. See page 195 for table of available types. Length L depends on the number of contacts, see table on page 195. The 3S series is delivered with a conical nut. ECP Fixed receptacle with two nuts, long threaded shell, with elbow (90) contacts for printed circuit (back panel mounting) L N 20 mini E maxi Reference oA M e oB S3S1 Dimensions (mm) Model Series A ECP ECP ECP ECP 0S 1S 2S 3S 12 16 20 24 Panel cut-out: P1 B e E M 12.5 M9x0.6 8.5 2.5 16.0 M12x1.0 10.0 3.5 19.5 M15x1.0 11.0 3.5 25.2 M18x1.0 14.0 4.5 N S1 15.0 8.2 17.5 10.5 20.0 13.5 24.0 16.5 S3 11 14 17 22 PCB drilling pattern: P24 2 Note: This contact type is available for all back panel mounting receptacle types. See page 196 for available types. Length L depends on the number of contacts, see PCB drilling pattern on page 196. The 3S series is delivered with a conical nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 79 (R) (R) Elbow (90) receptacles for printed circuit These receptacle models are fixed onto the printed circuit either by soldering the corner pins or with four screws (M1.6) replacing the pins. EXP receptacles are two nut fixing and are recommended in cases where a flexible printed circuit is used. Technical Characteristics Types Materials and Treatment Component Surface Treat. (m) Material Cu PPS 1) Brass Brass Bronze PEEK Bronze Housing Metallic parts Grounding crown Insulator Female contact Series 0.5 0.5 0.5 0.5 Ni - 3 3 3 - 3 Au - - - 1.5 Type Note: 1) Not used for all sizes. The surface treatment standards are as follows: Nickel FS QQ-N-290A; Gold ISO 4523. 1 0S, 1S 1 302 2 2 2 3 0S, 1S 303 2 304 2 3 305 3 Electrical 1 3 1 1 1 4 2 3 1 4 2 3 306 5 1 4 5 16 1S 6 Model Series EPL EXP EPL EXP EPL EXP 0S 0S 1S 1S 1S 1S 302-303-304 1.20 4.5 305-306 0.70 4.5 Types 2 1S 5 1 4 Rated current (A) 3 Test voltage (kV rms)1) 2 0S, 1S 2 5 3 4 4 Note: 1) See calculation method, caution and suggested standard on page 204. EPL Elbow (90) receptacle for printed circuit (solder or screw fixing) oA 7.62 2.54 EPL.0S.302.HLN EPL.0S.303.HLN EPL.0S.304.HLN EPL.1S.302.HLN EPL.1S.303.HLN EPL.1S.304.HLN EPL.1S.305.HLN EPL.1S.306.HLN L K A 9 D Dimensions (mm) H I K L N 14.5 6.9 12.7 13.2 25 11.6 11 16.5 7.7 14.0 13.2 27 12.6 3 H I N Part Number o 0.7 M 1.6 D 2.54 80 Note: To replace the 4 ground pins by 4 screws (M1.6) add an S to the end of the part number. (e.g.: EPL.1S.303.HLNS) PCB drilling pattern: P22 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) EPL Elbow (90) receptacle for printed circuit K 5.08 Part Number 2.54 EPL.0S.116.DTL L N A D 8.8 16 Dimensions (mm) H I K L 12 9 7.7 22.7 N 9 3 I oA Note: Available only in single contact version. O1 PCB drilling pattern: P23 D EXP Elbow (90) receptacle for printed circuit with two nuts (solder or screw fixing) 7.62 Part Number K L S3 I B D e Dimensions (mm) E H I K L M N S3 12 12.5 14.5 M9x0.6 6.0 6.9 12.7 13.2 25 2.5 11.6 11 14 15.0 16.5 M11x0.5 7.5 7.7 14.0 13.2 27 3.5 12.6 13 3 oB H oA M e N EXP.0S.302.HLN EXP.0S.303.HLN EXP.0S.304.HLN EXP.1S.302.HLN EXP.1S.303.HLN EXP.1S.304.HLN EXP.1S.305.HLN EXP.1S.306.HLN A o 0.7 M 1.6 E maxi D Note: To replace the four ground pins by four screws (M1.6) add an S to the end of the part number. (e.g.: EXP.1S.303.HLNS). Panel cut-out: P2 0S series Panel cut-out: P10 1S series 2.54 PCB drilling pattern: P22 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 81 (R) (R) PCA Free receptacle, cable collet Reference oA ~L S2 Model Series PCA PCA PCA PCA PCA PCA PCA PCA 00 0S 1S 2S 3S 4S 5S 6S Dimensions (mm) A L 6.5 25.0 8.9 33.5 11.9 40.5 14.8 50.0 17.8 59.0 24.8 75.0 34.7 99.0 46.0 102.0 S2 4.5 6.5 8.5 11.0 14.0 19.0 29.0 38.0 PCA Free receptacle with oversize cable collet Reference oA oB ~L S2 S1 Dimensions (mm) Model Series A PCA PCA PCA PCA PCA PCA 00 0S 1S 2S 3S 4S 6.5 8.9 11.9 14.8 17.8 24.8 B L 8.0 33.0 10.0 44.5 13.0 55.0 18.0 65.0 21.0 83.0 31.8 105.0 S1 S2 7.0 9.0 12.0 14.0 19.0 28.5 6.5 8.5 11.0 14.0 19.0 29.0 Note: The fitting of oversize collets onto this model allows it to be fitted to the cables that can be accommodated by the next housing size up. PCA Free receptacle, cable collet and nut for fitting a bend relief Reference oA ~L Dimensions (mm) Model Series A L S2 PCA PCA PCA PCA PCA PCA 00 0S 1S 2S 3S 4S 6.5 8.9 11.9 14.8 17.8 24.8 25.0 33.5 40.5 50.0 59.0 75.0 6 7 9 12 14 20 S2 Note: The bend relief must be ordered separately (see page 175). PCP Free receptacle, cable collet and inner anti-rotating device Reference oA ~L Dimensions (mm) Model Series A PCP PCP PCP PCP PCP 0S 1S 2S 3S 4S 8.9 11.9 14.8 17.8 24.8 L S2 33.5 6.5 40.5 8.5 50.0 11.0 59.0 14.0 75.0 19.0 S2 82 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) PZP Free receptacle for remote handling with cable collet and inner anti-rotating device Reference oA ~L S2 N Dimensions (mm) Model Series A L N S2 S3 PZP PZP PZP 1S 2S 3S 16 24 24 40.5 50.0 59.0 15 21 24 8.5 11.0 14.0 12 18 18 S3 PSA Fixed receptacle, nut fixing, cable collet Reference ~L e oA M E maxi S2 oB S3 Dimensions (mm) Model Series A B e E L M S1 PSA PSA PSA PSA PSA PSA PSA PSA 00 0S 1S 2S 3S 4S 5S 6S 8 10 14 18 22 28 40 54 10.3 12.5 16.0 19.5 25.2 32.0 40.0 54.0 M7x0.5 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 M35x1.0 M48x1.5 5.5 7.0 7.5 8.5 11.5 12.0 15.5 16.0 25.0 33.5 40.5 50.0 59.0 75.0 99.0 102.0 1.0 1.2 1.5 1.8 2.0 2.5 3.0 3.5 6.3 8.2 10.5 13.5 16.5 23.5 33.5 45.5 S2 S3 4.5 6.5 8.5 11.0 14.0 19.0 29.0 38.0 9 11 14 17 22 30 - - Panel cut-out: P1 S1 Note: The 5S series is delivered with a tapered washer and a round nut. The 6S series is delivered without a locking washer and with a round nut. PSP Fixed receptacle, nut fixing, cable collet and inner anti-rotating device Reference ~L e oA M oB S3 Dimensions (mm) Model Series A B e E L M PSP PSP PSP PSP PSP 0S 1S 2S 3S 4S 10 14 18 22 28 12.5 16.0 19.5 25.2 32.0 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M25x1.0 7.0 7.5 8.5 11.5 12.0 33.5 40.5 50.0 59.0 75.0 1.2 1.5 1.8 2.0 2.5 S1 S2 S3 8.2 6.5 11 10.5 8.5 14 13.5 11.0 17 16.5 14.0 22 23.5 19.0 30 Panel cut-out: P1 E maxi S2 S1 PSS Free receptacle, nut fixing for cable crimping Reference L S2 E maxi oA oB M e S3 Model Series PSS 00 Dimensions (mm) A B e 8 10.3 M7x0.5 E L M S1 S2 S3 5.5 30 1 6.3 5.5 9 Panel cut-out: P1 S1 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 83 (R) (R) Models with microswitch Some receptacles are available fitted with a microswitch. The microswitch is independent from the electrical contacts of the receptacle. The introduction of the plug into the receptacle activates the microswitch (the drawings below are of corresponds to the receptacles without the plug). EMD Fixed receptacle with two nuts and microswitch (back panel mounting) L maxi M S3 S1 e oA 2 oB 3 Reference 1 E maxi Model Series EMD 2S Dimensions (mm) A B e E L M S1 20 19.5 M15x1.0 2.2 26.7 3.5 13.5 S3 17 Panel cut-out: P1 2 3 Note: Only exists in 10-contact version (type 310). For the microswitch: maximum operating voltage: 250Veff/Vdc rated current: 7A/0.25A. 1 ERM Fixed receptacle, nut fixing with microswitch Reference L M 1 oA e oB S3 2 S1 E maxi Dimensions (mm) Model Series A ERM 1S 14 B e E 16 M12x1.0 7.5 L M S1 38 1.5 10.5 S3 14 Panel cut-out: P1 Note: Only exists in 2 or 5-contact versions (type 302, 305). For the microswitch: maximum operating voltage: 270Veff/Vdc rated current: 8.5A/0.5A. ERZ Fixed receptacle, nut fixing with double microswitch and printed circuit contacts L N M S3 oA e Dimensions (mm) Model Series A B C e E ERZ 1S 14 16 0.4 M12x1.0 7.5 L M N O 39 1.5 2.7 0.9 10.5 14 oC oB O Reference 3 4 5 Panel cut-out: P1 S1 1 4 2 5 3 6 Note: Only exists in 3 or 6-contact versions (type 303, 306). For the microswitch: maximum operating voltage: 28 Veff rated current: 0.1 A. o 0.4 1 2 2.54 2.54 E maxi 6 2.54 84 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com S1 S3 (R) (R) RMA Free coupler Reference oA ~L Dim. (mm) Model Series A L RMA RMA RMA RMA RMA RMA RMA 00 0S 1S 2S 3S 4S 5S 6.4 8.9 11.9 14.8 17.8 24.8 34.7 22.0 25.0 28.5 31.5 38.5 46.5 60.5 Note: See page 112 for the available plug and contact configurations and in order to ensure correct contact alignment. RAD Fixed coupler, nut fixing Reference Dimensions (mm) L oA e oB M S3 S1 E maxi Model Series A B e RAD RAD RAD RAD RAD RAD RAD 00 0S 1S 2S 3S 4S 5S 8 10 14 18 22 28 40 10.3 12.5 16.0 19.5 25.2 32.0 40.0 L M S1 S2 M7x0.5 5.5 22.0 1.0 6.3 9 M9x0.6 7.0 25.0 1.2 8.2 11 M12x1.0 7.5 28.5 1.5 10.5 14 M15x1.0 8.5 31.5 1.8 13.5 17 M18x1.0 11.5 38.5 2.0 16.5 22 M25x1.0 12.0 46.5 2.5 - 30 M35x1.0 15.5 60.5 3.0 - - Panel cut-out: P1 Note: See page 112 for the available plug and contact configurations and in order to ensure correct contact alignment. E Panel cut-out: P2 4S and 5S series Note: The 5S series is delivered with a tapered washer and a round nut. FEF Straight coupler with two plugs and front seal Reference Dimensions (mm) Model Series A L M ~M FEF 5S 39 130 80 oA ~L FRT Straight plug with resistor Reference Dimensions (mm) Resistor L Series A L M FRT 00 6.4 33 25 50 1/8 W oA M Model LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 85 (R) (R) FTA T-plug with two in line receptacles Reference A H I L Dimensions (mm) Model Series A FTA FTA FTA FTA 00 0S 1S 3S 9 13 16 21 H I 17.5 9.5 23.0 13.0 26.5 16.5 38.5 23.5 L 30 38 45 64 Note: Multicontact version available only with 2 contacts (type 302). FTR Elbow (90) plug with receptacle Reference L Model Series A FTR FTR FTR 00 3S 4S 9 21 28 H I L 17.5 9.5 18.5 38.5 23.5 41.5 49.0 31.0 54.0 Note: Available only in single contact version. H I A Dimensions (mm) 86 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Plastic housing models FFA, FFP, FFL and ERN plug and receptacle models are also available with the outer shell and the collet nut made from various insulating materials. These connectors are particularly recommended for all applications requiring maximum electrical insulation when mated, such as medical applications. The design, including a latch sleeve and a metal grounding crown, guarantees EMC screening efficiency to meet most requirements. Technical Characteristics Mechanical and Climatic Value Characteristics PEEK Color Endurance Humidity Temperature range Sterilization resistance 1) Resistance to organic solvents POM natural (beige) > 5000 cycles PSU black white or grey > 5000 cycles > 5000 cycles up to 95% at 140 F -58 F/+482 F -58 F/+239 F -58 F/+302 F > 200 cycles none ~20 cycles very good very good limited Standard PPSU cream > 5000 cycles - IEC 60512-5 test 9a - -58 F/+356 F - > 100 cycles IEC 60601-1 44.7 good - Note: 1) Steam sterilization FFA Straight plug, cable collet, PEEK or POM outer shell FFP Straight plug, cable collet, PEEK or POM outer shell and inner anti-rotating device Reference ~L Dimensions (mm) Model Series A L FFA FFP FFP FFP FFP 00 0S 1S 2S 3S 7.0 9.5 12.0 15.0 18.0 33.5 34.5 42.5 52.0 61.0 M S2 oA ~M S2 25.5 6.0 24.5 8.0 31.5 10.0 40.0 12.0 46.0 14.0 FFP Straight plug, cable collet, PEEK or POM outer shell, inner anti-rotating device and nut for fitting a bend relief Reference ~L Dimensions (mm) Model Series A L FFP FFP FFP FFP 0S 1S 2S 3S 9.5 12.0 15.0 18.0 33.5 41.5 51.0 61.0 M S2 oA ~M 23.5 7.0 30.5 10.0 39.0 12.0 46.0 14.0 S2 Note: The bend relief must be ordered separately (see page 175). FFL Straight plug, cable collet, with PSU and PPSU outer shell, inner anti-rotating device and nut for fitting a bend relief Reference ~L Model Series FFL 2S Dimensions (mm) A L M S2 oA ~M 16.5 51.5 39.5 13 Note: The bend relief must be ordered separately (see page 175). This model is fitted with a D or M type collet system (see page 206). It is also adapted for crimp contacts. S2 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 87 (R) (R) ERN Fixed receptacle, nut fixing, with grounding tab, PEEK or POM outer shell Reference L maxi M oA e oB S3 E maxi S1 Dimensions (mm) Model Series A B ERN ERN ERN ERN ERN 00 0S 1S 2S 3S 9 11 14 18 22 10.3 12.5 16.0 19.5 25.2 e E M7x0.5 5.5 M9x0.6 7.0 M12x1.0 7.5 M15x1.0 8.5 M18x1.0 11.5 L L1) - 19.3 23.0 26.3 29.8 15.1 19.3 23.0 26.3 30.0 M S1 S3 1.0 6.3 9 1.2 8.2 11 1.5 10.5 14 2.0 13.5 17 2.0 16.5 22 Panel cut-out: P1 Note: 1) Single contact model. Watertight or vacuum-tight models HGP, HGW, EWB, HCP, SWH receptacle or coupler models allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter P at the end of the reference. Most of these models are also available in a vacuum-tight version. Such models are identified by an additional letter V at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Please refer to page 8 to locate the chapter on selecting watertight connectors. Part number example: Watertight receptacle - HGP.1S.304.CLLP Vacuum-tight receptacle - HGP.1S.304.CLLPV Technical Characteristics Mechanical and Climatic Characteristics Value Endurance Humidity Temperature range Salt spray corrosion test Protection index (mated) Climatic category Leakage rate (He)1) 0S 1S 2S 3S 4S 5S 6S Maximum operating pressure2) Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F - 4 F/+176 F > 144h IEC 60512-6 test 11f IP 68 IEC 60529 20/80/21 IEC 60068-1 < 10-6 mbar.l.s-1 IEC 60512-7 test 14b 60 bars 60 bars 40 bars 30 bars IEC 60512-7 test 14d 15 bars 5 bars 5 bars Note: 1) Only for vacuum-tight models. 2) This value corresponds to the maximum allowed pressure difference for the assembled receptacle. HGP Fixed receptacle, nut fixing, watertight or vacuum-tight Reference L maxi M oA e oB S3 S1 E maxi Dimensions (mm) Model Series A B e E L L1) M S1 S3 HGP HGP HGP HGP HGP HGP HGP 0S 1S 2S 3S 4S 5S 6S 18 20 20 28 34 45 58 16.0 19.5 21.8 27.5 32.0 40.0 54.0 M12x1.0 M14x1.0 M16x1.0 M20x1.0 M25x1.0 M35x1.0 M48x1.5 11.5 15.5 17.0 19.0 22.5 28.0 20.0 22.0 25.5 28.0 35.5 41.0 54.5 57.0 20.5 25.5 28.0 34.5 42.0 78.5 - 4.0 4.0 4.0 6.0 6.5 7.5 6.0 10.5 12.5 14.5 18.5 23.5 33.5 45.5 14 17 19 24 30 - - Panel cut-out: P3 Note: 1) Single contact model Note: The 5S and 6S series are delivered with a round nut. 88 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) HGW Fixed receptacle, nut fixing, with back washer, watertight or vacuum-tight L maxi S3 M oA e oB Reference Model Series HGW HGW 0S 1S Dimensions (mm) A B e E 10 15 M9x0.6 14 18 M12x1.0 2 4 L M S3 17.5 1.2 11 20.2 1.5 14 E maxi Panel cut-out: P11 Note: Vacuum-tight version is only available in the 0S series. EWB Fixed receptacle, nut fixing, with two flats on the flange, watertight or vacuum-tight L maxi S3 S1 M oA e oB Reference S4 E maxi Dimensions (mm) Model Series A B e E L L1) M EWB EWB EWB EWB 0S 1S 2S 4S 18 20 20 34 16.0 19.5 21.8 32.0 M12x1.0 M14x1.0 M16x1.0 M25x1.0 11.5 17.0 19.0 22.5 22.0 25.5 28.0 41.0 - 25.5 26.5 - 4.0 4.0 4.0 6.5 S1 S3 S4 10.5 12.5 14.5 23.5 14 17 19 30 14 16 16 27 Note: 1) Single contact model Panel cut-out: P3 HCP Fixed receptacle, nut fixing, watertight or vacuum-tight (back panel mounting) L maxi M S1 E maxi P oA e oB Reference Dimensions (mm) Model Series A B e E L M P S1 HCP HCP HCP 1S 2S 4S 18 20 27 20 M14x1.0 8.6 25.5 3.5 12.0 - 20 M16x1.0 12.5 29.0 3.5 16.5 14.5 34 M25x1.0 15.5 41.0 4.5 20.0 23.5 Panel cut-out: P3 Note: The 4S series is delivered with a conical nut. SWH Fixed coupler, nut fixing, watertight or vacuum-tight Dimensions (mm) Reference L M oA e oB S3 E maxi S1 Model Series A B e E L M S1 S3 SWH SWH SWH SWH SWH SWH SWH 0S 1S 2S 3S 4S 5S 6S 14 17 20 25 34 45 58 13.8 16.0 21.8 27.0 32.0 40.0 54.0 M10x0.75 M12x1.00 M16x1.00 M20x1.00 M25x1.00 M35x1.00 M48x1.50 17 28 25 30 50 58 55 34 39 44 53 65 80 81 2.0 2.5 4.0 4.0 4.0 5.0 6.0 9.0 10.5 15.0 18.5 23.5 33.5 45.5 12 14 19 24 30 - - Panel cut-out: P4 Note: See page 112 for the available plug and contact configurations and in order to ensure correct contact alignment. The 5S and 6S series are delivered with a round nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 89 (R) 90 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) E Series E series connectors have been specifically designed for outdoor applications. They include an inner sleeve and two seals to prevent penetration of solids or liquids into the housing formed by the plug, free receptacle, fixed receptacle or coupler. All models of these series are watertight when mated and give a protection index of IP 68 as per IEC 60529 standard (in mated condition) when correctly assembled to an appropriate cable (IP 66 otherwise). - security of the Push-Pull latching system - watertight connection (IP 68/IP 66) - single contact types transmitting current up to 230 A and multicontact types with up to 106 contacts - solder or printed circuit contacts (straight or elbow) - polarization by stepped insert (half-moon) fitted with male and female contacts - wide range of models satisfying most applications - 360 screening for full EMC shielding - rugged housing for extreme working condition. Interconnections Straight plug Straight plugs FZP FFA, FFP Fixed receptacles ERA EEP ERC EEP ERB EEP Free receptacles PCA, PCP Fixed plug FFA PCA FAA Elbow plug FFA PCA Fixed receptacle FLA FFF EHP Watertight or vacuum-tight models Fixed receptacles HGP EBR PSA, PSP Fixed coupler Free coupler SWH RMA Model Description EBR Fixed receptacle with round flange, watertight, protruding shell and screw fixing EEP Fixed receptacle, nut fixing (back panel mounting) EEP Fixed receptacle, nut fixing, with elbow (90) contacts for printed circuit (back panel mounting) EEP Fixed receptacle, nut fixing, with straight contacts for printed circuit (back panel mounting) EHP Fixed receptacle, nut fixing, protruding shell ERA Fixed receptacle, nut fixing ERB Fixed receptacle, nut fixing with two flats in the flange ERC Fixed receptacle, nut fixing with slot in the flange FAA Fixed plug non-latching, nut fixing FFA Straight plug, cable collet FFA Straight plug with oversize cable collet FFA Straight plug, cable collet and nut for fitting a bend relief FFF Straight plug non-latching, cable collet FFP Straight plug, cable collet and inner anti-rotating device FLA Elbow (90) plug, cable collet FZP Straight plug for remote handling, cable collet and inner anti-rotating device HGP Fixed receptacle, nut fixing, watertight or vacuum-tight PCA Free receptacle, cable collet PCA Free receptacle with oversize cable collet PCA Free receptacle, cable collet and nut for fitting a bend relief PCP Free receptacle, cable collet and inner anti-rotating device PSA Fixed receptacle, nut fixing, cable collet PSP Fixed receptacle, nut fixing, cable and inner anti-rotating device RMA Free coupler SWH Fixed coupler, nut fixing, watertight or vacuum-tight LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 91 (R) (R) Part Section Showing Internal Components Straight plug Fixed receptacle 5 1 2 3 4 5 6 7 8 2 3 8 4 9 6 7 8 1 8 2 3 7 6 1 4 10 13 12 outer shell latch sleeve inner shell retaining ring collet nut center-piece insulator male contact female contact grounding cone collet gasket washer 1 2 3 4 5 6 7 8 9 10 11 12 13 5 11 outer shell grounding crown retaining ring hexagonal nut insulator male contact female contact O-ring Technical Characteristics Mechanical and Climatic Electrical Characteristics Value Endurance Humidity Temperature range1) 2) Resistance to vibrations Shock resistance Salt spray corrosion test Protection index (mated) Climatic category1) Standard Characteristics > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F -58 F, +392 F 10-2000 Hz, 15 g IEC 60512-4 test 6d 100 g, 6 ms IEC 60512-4 test 6c > 144h IEC 60512-6 test 11f IP 68/IP 66 IEC 60529 50/175/21 IEC 60068-1 Value at 10 MHz at 1 GHz Shielding efficiency Standard > 95 dB > 80 dB IEC 60169-1-3 IEC 60169-1-3 Note: The various tests have been carried out with FFA and ERA connector pairs, with chrome-plated brass shell, PEEK insulator and silicone Oring. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 197. 1) For watertight or vacuum-tight models see page 100. 2) Minimum operating temperature is -4 F for receptacles fitted with an FPM (Viton) O-ring. Available Models (series and types) Model EBR EEP EEP 1) EGG 5) EHP ERA ERB ERC FAA FFA FFA 2) FFA 3) FFF FFP Single contact Multicontact 0E 1E 2E 3E 4E 5E 0E 1E 2E 3E 4E 5E 6E Model FGG 5) FLA FZP HGP 4) PCA PCA 2) PCA 3) PCP PHG 5) PKG 5) PSA PSP RMA SWH 4) Single contact Multicontact 0E 1E 2E 3E 4E 5E 0E 1E 2E 3E 4E 5E 6E Note: RMA and SWH models are not available in all types. Please consult pages corresponding to the models. 1) with elbow (90) printed circuit contacts 2) with oversize cable collet 3) with cable collet and nut for fitting a bend relief 4) with key (6E series) 5) with key (G) = available models by series and types 92 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Part Number Example Straight plug with cable collet FFA 1E 304 C L A C 35 Model: (page 94) Series: (page 94) Variant: see note 1) Type: (page 103) Cable o: (page 113) Housing: (page 111) Cable fixing: (page 113) Insulator: (page 111) Contact: (page 111) FFA.1E.304.CLAC35 = straight plug with cable collet, 1E series, multicontact type with four contacts, chrome-plated brass shell and PEEK insulator, male solder contacts, C type collet for a 3.5 mm diameter cable. Fixed receptacle ERA 0E 302 C L L Model: (page 96) Series: (page 96) Variant: see note 1) Type: (page 103) Contact: (page 111) Housing: (page 111) Insulator: (page 111) ERA.0E.302.CLL = fixed receptacle, nut fixing, 0E series, multicontact type with two contacts, chrome-plated outer shell, PEEK insulator, female solder contacts. Straight coupler RMA 4E 324 C L L Model: (page 99) Series: (page 99) Variant: see note 1) Type: (page 103) Contact: (page 111 and 112) Housing: (page 111) Insulator: (page 111) RMA.4E.324.CLL = straight coupler, 4E series, multicontact type with 24 contacts, chrome-plated brass outer shell, PEEK insulator, 12 female and 12 male contacts each end. Note: 1) The Variant position of the part number is used to specify either the presence of a nut for fitting a bend relief, or the anodized color of the aluminium housings. For models with collet nut for fitting a bend relief, a Z should be indicated and a bend relief can be ordered separately as indicated in the Accessories section. An order for a connector with bend relief should thus include two part numbers. For the various housings available in colors, the corresponding letter in the part number for the color is indicated on page 124. For the watertight models of receptacle, the letter P is used; for the vacuum-tight models of receptacle the letters PV shall be indicated. For the plug and receptacle that should be fitted with an FPM (Viton) O-ring the letter H shall be indicated. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 93 (R) (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Models - Series FFA Straight plug, cable collet Reference Model FFA FFA FFA FFA FFA FFA FGG1) ~L oA ~M S2 Dimensions (mm) Series A L M S2 0E 1E 2E 3E 4E 5E 6E 11 13 16 19 25 38 47 34 42 52 61 71 92 118 23.0 28.0 36.0 41.0 50.5 67.0 89.0 8 9 12 15 19 32 38 Note: 1) With key (G) FFA Straight plug with oversize cable collet Reference ~L oB oA ~M S2 Dimensions (mm) Model Series A B L M S1 S2 FFA FFA FFA FFA 1E 2E 3E 4E 13 16 19 25 14.5 17.0 22.0 36.0 55 65 80 105 41 49 60 84 12 15 19 30 12 15 19 32 Note: The fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up. S1 FFA Straight plug, cable collet and nut for fitting a bend relief Reference ~L oA ~M Dimensions (mm) Model Series A L M S2 FFA FFA FFA FFA FFA 0E 1E 2E 3E 4E 11 13 16 19 25 34 42 52 60 71 23.0 28.0 36.0 40.0 50.5 7 9 12 15 19 Note: The bend relief must be ordered separately (see page 175). S2 FFF Straight plug non-latching, cable collet Reference ~L Model Series A L M S2 FFF FFF 0E 1E 11 13 34 42 23 28 8 9 oA ~M Dimensions (mm) S2 94 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) FFP Straight plug, cable collet and inner anti-rotating device Reference ~L Model Series A L M S2 FFP FFP 3E 4E 19 25 61 71 41.0 50.5 15 19 oA ~M Dimensions (mm) S2 FZP Straight plug for remote handling, cable collet and inner anti-rotating device ~L Reference oA ~M S2 S1 N Dimensions (mm) Model Series A L M N S1 S2 FZP FZP FZP FZP FZP 1E 2E 3E 4E 5E 20 22 23 32 44 42 52 61 71 92 28.0 36.0 41.0 50.5 67.0 15.0 16.0 20.0 29.0 39.5 15 16 19 25 36 9 12 15 19 32 FAA Fixed plug non-latching, nut fixing L maxi M Reference oA e oB S3 S1 E maxi Dimensions (mm) Model Series A B e E L L1) M S1 S3 FAA FAA FAA FAA 0E 1E 2E 3E 18 20 25 31 19.5 21.5 27.5 34.5 M14x1.0 M16x1.0 M20x1.0 M24x1.0 3.5 3.5 4.0 4.5 19.5 23.0 27.0 32.5 19.5 23.0 27.0 32.5 13.0 16.0 18.0 22.5 12.5 14.5 18.5 22.5 17 19 24 30 Note: 1) Single contact model Panel cut-out: P1 FLA Elbow (90) plug, cable collet ~L S1 Reference H oA ~M S3 S2 Model Series FLA FLA FLA FLA FLA 0E 1E 2E 3E 4E Dimensions (mm) A D 11.5 7.6 14.0 8.8 17.5 10.5 21.0 11.5 27.5 15.5 H L M S1 S2 S3 27 33 40 47 57 36 43 51 60 72 25.0 29.0 35.0 40.0 51.5 10 12 15 18 24 8 9 12 15 19 8 10 13 15 20 D LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 95 (R) (R) ERA Fixed receptacle, nut fixing Reference L maxi Model oA M e oB S3 S1 E maxi ERA ERA ERA ERA ERA ERA EGG2) Dimensions (mm) Series A B e E L L1) M S1 S3 0E 1E 2E 3E 4E 5E 6E 18 20 25 31 37 55 65 19.5 21.5 27.5 34.5 41.5 54.0 65.0 M14x1.0 M16x1.0 M20x1.0 M24x1.0 M30x1.0 M45x1.5 M55x2.0 7.0 9.0 9.0 11.0 9.0 10.0 10.5 19.5 24.0 28.5 34.0 36.0 44.5 48.5 20.5 25.3 30.0 35.0 38.0 78.0 - 4.0 4.5 5.0 6.0 6.5 9.0 10.0 12.5 14.5 18.5 22.5 28.5 42.5 52.0 17 19 24 30 36 - - Note: 1) Single contact model Panel cut-out: P1 Note: 2) With key (G). The 5E and 6E series are delivered with a round nut. ERC Fixed receptacle, nut fixing with slot in the flange L maxi M Reference oA e oB F S3 S1 E maxi Model Series ERC ERC ERC 0E 3E 4E Dimensions (mm) A B e E F L L1) M S1 S3 18 19.5 M14x1.0 7 1.5 19.5 20.5 4.0 12.5 17 31 34.5 M24x1.0 11 3.0 34.0 35.0 6.0 22.5 30 37 41.5 M30x1.0 9 3.0 36.0 38.0 6.5 28.5 36 Panel cut-out: P1 Note: 1) Single contact model. ERB Fixed receptacle, nut fixing with two flats in the flange L maxi S4 Reference oA M e oB S3 Dimensions (mm) Model Series A B ERB ERB ERB ERB 0E 1E 2E 3E 18 20 25 31 19.5 21.5 27.5 34.5 e E M14x1.0 7 M16x1.0 9 M20x1.0 9 M24x1.0 11 L L1) M S1 S3 S4 19.5 24.0 28.5 34.0 20.5 25.3 30.0 35.0 4.0 4.5 5.0 6.0 12.5 14.5 18.5 22.5 17 19 24 30 14 17 20 24 S1 E maxi Panel cut-out: P1 Note: 1) Single contact model. EEP Fixed receptacle, nut fixing (back panel mounting) L maxi Reference P E maxi oA M e oB S1 Dimensions (mm) Model Series A B e E L L1) M P S1 EEP EEP EEP EEP 0E 1E 2E 3E 18 20 25 30 18 20 25 31 M14x1.0 M16x1.0 M20x1.0 M24x1.0 3.4 6.2 5.0 7.0 19.5 24.0 28.5 34.0 20.5 25.3 30.0 35.0 3.5 3.5 3.5 4.5 7 10 10 12 12.5 14.5 18.5 22.5 Panel cut-out: P1 Note: 1) Single contact model. Note: The 3E series is delivered with a conical nut. 96 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) EEP Fixed receptacle, nut fixing, with straight contact for printed circuit (back panel mounting) L N Reference P e oB oA M S1 Dimensions (mm) Model Series A B e E M N P S1 EEP EEP EEP EEP 0E 1E 2E 3E 18 20 25 30 18 20 25 31 M14x1.0 M16x1.0 M20x1.0 M24x1.0 3.4 6.2 5.0 7.0 3.5 3.5 3.5 4.5 18.4 23.5 25.5 30.5 7 10 10 12 12.5 14.5 18.5 22.5 Panel cut-out: P1 PCB drilling pattern: P21 E maxi Note: This contact type is available for all E receptacle models. See page 195 for table of available types. Length L depends on the number of contacts, see PCB drilling pattern on page 195. The 3E series is delivered with a conical nut. L EEP Fixed receptacle, nut fixing, with elbow (90) contacts for printed circuit (back panel mounting) N P M S1 e 20 mini oA oB Reference Dimensions (mm) Model Series A B e EEP 2E 25 25 M20x1.0 E M 5 3.5 24.5 10 18.5 Panel cut-out: P1 E maxi N P S1 PCB drilling pattern: P24 Note: This contact type is available for all back panel mounting receptacle types. See page 196 for available types. Length L depends on the number of contacts, see PCB drilling pattern on page 196. 2 EHP Fixed receptacle, nut fixing, protruding shell L maxi oA Reference e oB M S3 E maxi S4 Model Series EHP EHP EHP 0E 1E 2E Dimensions (mm) A B e E L L1) M S3 S4 18 19.5 M14x1.0 1.5 19.5 20.5 10.5 17 20 21.5 M16x1.0 1.5 24.0 25.3 15.5 19 25 27.5 M20x1.0 2.0 28.5 30.0 17.0 24 15 17 20 Panel cut-out: P1 Note: 1) Single contact model. PCA Free receptacle, cable collet Reference Model oA ~L S2 PCA PCA PCA PCA PCA PCA PHG1) Series 0E 1E 2E 3E 4E 5E 6E Dimensions (mm) A L 13 34.0 15 45.0 19 54.0 23 65.0 29 75.5 42 95.0 52 125.0 S2 8 9 12 15 19 32 38 Note: 1) With key (G). LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 97 (R) (R) PCA Free receptacle with oversize cable collet Reference oB oA ~L S2 Dimensions (mm) Model Series A PCA PCA PCA PCA 1E 2E 3E 4E 15 19 23 29 B L 14.5 58.0 17.0 67.0 22.0 84.0 36.0 109.0 S1 S2 12 15 19 30 12 15 19 32 Note: The fitting of oversize collets onto this model allows them to be fitted to the cables that can be accommodated by the next housing size up. S1 PCA Free receptacle, cable collet and nut for fitting a bend relief Reference oA ~L Dimensions (mm) Model Series A L S2 PCA PCA PCA PCA PCA 0E 1E 2E 3E 4E 13 15 19 23 29 34.0 45.0 54.0 64.0 75.5 7 9 12 15 19 Note: The bend relief must be ordered separately (see page 175). S2 PCP Free receptacle, cable collet and inner anti-rotating device Reference oA ~L Dimensions (mm) Model Series A L S2 PCP PCP 3E 4E 23 29 65.0 75.5 15 19 S2 PSA Fixed receptacle, nut fixing, cable collet Reference Model L maxi oA M e oB S3 PSA PSA PSA PSA PSA PSA PKG1) Dimensions (mm) Series A B 0E 1E 2E 3E 4E 5E 6E 18 20 25 31 37 51 65 19.5 21.5 27.5 34.5 41.5 54.0 65.0 e E L M M14x1.0 7.0 34.0 4.0 M16x1.0 9.0 45.0 4.5 M20x1.0 9.0 54.0 5.0 M24x1.0 11.0 65.0 6.0 M30x1.5 9.0 75.5 6.5 M45x1.5 10.0 95.0 9.0 M55x2.0 10.5 125.0 10.0 Panel cut-out: P1 S2 98 E maxi S1 Note: 1) With key (G). The 5E and 6E series are delivered with a round nut. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com S1 S2 S3 12.5 14.5 18.5 22.5 28.5 - - 8 9 12 15 19 32 38 17 19 24 30 36 54 - (R) (R) PSP Fixed receptacle, nut fixing, cable collet and inner anti-rotating device Reference Dimensions (mm) L maxi oA M e oB S3 Model Series PSP PSP PSP 3E 4E 5E A B e E L M S1 S2 S3 31 34.5 M24x1.0 11.0 65.0 6.0 22.5 15 30 37 41.5 M30x1.5 9.0 75.5 6.5 28.5 19 36 51 54.0 M45x1.5 10.0 95.0 9.0 - 32 54 Panel cut-out: P1 S2 E maxi Note: The 5E and 6E series are delivered with a round nut. S1 RMA Free coupler Reference oA L maxi Dim. (mm) Model Series A L RMA RMA RMA RMA RMA RMA 0E 1E 2E 3E 4E 5E 14 16 20 25 30 44 30 40 44 54 57 67 Note: See page 112 for the available plug and contact configurations and in order to ensure correct contact alignment. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 99 (R) (R) Watertight or vacuum-tight models HGP, EBR and SWH receptacle or coupler models allow the device on which they are fitted to reach a protection index of IP 68 as per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter P at the end of the reference. Most of these models are also available in a vacuum-tight version. Such models are identified by an additional letter V at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Please refer to page 8 to locate the chapter on selecting watertight connectors. Part number example: Watertight receptacle - HGP.1E.304.CLLP Vacuum-tight receptacle - HGP.1E.304.CLLPV Technical Characteristics Mechanical and Climatic Characteristics Value Endurance Humidity Temperature range Salt spray corrosion test Protection index (mated) Climatic category Leakage rate (He)1) 0E 1E 2E 3E 4E 5E 6E Maximum operating pressure2) Standard > 5000 cycles IEC 60512-5 test 9a up to 95% at 140 F -4 F/+176 F > 144h IEC 60512-6 test 11f IP 68 IEC 60529 20/80/21 IEC 60068-1 < 10-6 mbar.l.s-1 IEC 60512-7 test 14b 60 bars 60 bars 40 bars 30 bars IEC 60512-7 test 14d 15 bars 5 bars 5 bars Note: 1) Only for vacuum-tight models. 2) This value corresponds to the maximum allowed pressure difference for the assembled receptacle. HGP Fixed receptacle, nut fixing, watertight or vacuum-tight Reference L maxi Model M HGP HGP HGP HGP HGP HGP HGP1) oA e oB S3 S1 E maxi Dimensions (mm) Series A B e E L 0E 1E 2E 3E 4E 5E 6E 18 20 25 31 37 55 65 19.5 21.5 27.5 34.5 41.5 54.0 65.0 M14x1.0 M16x1.0 M20x1.0 M24x1.0 M30x1.0 M45x1.5 M55x2.0 7.0 9.0 10.5 15.5 17.5 20.0 20.5 23.5 28.0 32.5 39.5 43.0 52.0 52.0 L1) M 22.0 4.0 28.0 4.5 28.0 5.0 38.5 6.0 44.0 6.5 76.0 9.0 - 10.0 S1 S3 12.5 14.5 18.5 22.5 28.5 42.5 52.0 17 19 24 30 36 - - Note: 1) Single contact model Panel cut-out: P1 Note: 1) With key (G). The 5E and 6E series are delivered with a round nut. N EBR Fixed receptacle with round flange, watertight, protruding shell and screw fixing ~L H1 ~M oA H2 oB Reference Dimensions (mm) Model Series A B EBR 2E 28 19 C H1 H2 L M N 2.8 11.8 20.4 32.5 28.0 19 15 Panel cut-out: P6 oC Note: 1) Single contact model. This model is only available in a watertight version. 100 L1) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) SWH Fixed coupler, nut fixing, watertight or vacuum-tight Reference Model L M oA e oB S3 E maxi S1 SWH SWH SWH SWH SWH SWH SWH1) Dimensions (mm) Series A B e E 0E 1E 2E 3E 4E 5E 6E 18 20 25 31 37 55 65 19.5 21.5 27.5 34.5 41.5 54.0 65.0 M14x1.0 M16x1.0 M20x1.0 M24x1.0 M30x1.0 M45x1.5 M55x2.0 21 29 28 33 43 45 12 L M 36.0 4.0 47.0 4.5 52.5 5.0 64.0 6.0 70.0 6.5 81.0 9.0 75.0 10.0 S1 S3 12.5 14.5 18.5 22.5 28.5 42.5 - 17 19 24 30 36 - - Panel cut-out: P1 Note: 1) With key (G). The 5E and 6E series are delivered with a round nut. See page 112 for the available plug and contact configurations and in order to ensure correct contact alignment. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 101 (R) 102 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ (R) Type (S and E series) Single contact Contact type Standard Watertight o A (mm) Solder Crimp Test voltage (kV rms)1) Test voltage (kV dc)1) Rated current (A)1) 00 113 00 - 1.3 2) 0.8 1.2 8 0S 0E 116 0S 0E 1.6 2) - 1.5 2.1 12 1S 1E 120 1S 1E 2.0 2) - 1.8 2.7 18 130 1S 1E 3.0 - 1.5 2.1 25 130 2S 2E 3.0 - 2.1 3.0 30 140 2S 2E 4.0 - 1.8 2.4 40 140 3S 3E 4.0 - 2.4 3.3 43 160 3S 3E 6.0 - 1.8 2.4 65 140 4S - 4.0 - 3.0 4.2 46 160 4S 4E 6.0 - 2.7 3.9 70 112 5S 5E 12.0 - 1.5 2.1 230 oA Reference Series Male solder contacts 2S 2E 3S 3E 4S 4E Female solder contacts 5S 5E Note: 1) See calculation method, caution and suggested standard on page 204. 2) Also available with inversed contacts: plug = female, receptacle = male. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 103 (R) (R) Multicontact Contact type Standard Watertight Number of contacts o A (mm) Solder Crimp Printed circuit (straight) Printed circuit (elbow) Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 302 0S 0E 2 0.9 1.5 2.1 103) 303 0S 0E 3 0.7 1.0 1.5 73) 304 0S 0E 4 0.7 1.0 1.5 73) 302 1S 1E 2 1.3 1.2 1.8 153) 303 1S 1E 3 0.9 1.2 1.8 103) 304 1S 1E 4 0.9 1.2 1.8 103) 305 1S 1E 2 3 0.9 0.7 1.5 1.5 2.1 2.1 103) 73) 306 1S 1E 6 0.7 1.5 2.1 73) 302 2S 2E 2 1.6 1.8 2.4 204) 303 2S 2E 3 1.3 1.5 2.1 154) 304 2S 2E 4 1.3 1.8 2.4 154) 305 2S 2E 5 1.3 1.5 2.1 134) 306 2S 2E 6 1.3 5) 1.5 2.1 12 307 2S 2E 3 4 1.3 0.9 0.8 0.8 1.2 1.2 123) 93) 308 2S 2E 8 0.9 0.8 1.2 93) 310 2S 2E 10 0.9 0.8 1.2 73) 302 3S 3E 2 2.0 - 3.0 4.2 23 303 3S 3E 3 2.0 - 1.5 2.1 20 304 3S 3E 4 2.0 - 1.5 2.1 18 305 3S 3E 2 3 2.0 1.3 - 1.5 1.5 2.1 2.1 18 14 306 3S 3E 6 1.3 - 2.1 3.0 14 307 3S 3E 7 1.3 - 1.0 1.5 12 oA oA Reference Series Male solder contacts 0S 0E Female solder contacts 1 2 2 1 2 1 1 2 3 3 2 3 1S 1E 1 4 1 4 1 1 2 2 2 1 2 3 1 2 3 2 3 3 1 4 1 4 2 3 2 2 3 4 3 2 5 6 1 5 1 5 1 2 5 4 1 3 4 3 4 6 2S 2E 2 1 1 2 2 1 1 2 3 3 2 3 1 4 1 4 2 3 2 3 2 1 1 3 4 5 5 4 2 3 2 1 1 3 4 6 5 3 4 6 2 2 1 4 5 3 1 4 5 7 7 6 3 4 5 6 2 2 1 3 1 4 5 8 6 3 4 7 7 2 9 5 8 1 8 8 7 2 5 6 1 1 2 2 1 1 2 3 3 2 1 1 2 3 4 4 3 2 3 4 10 7 3S 3E 5 6 3 9 1 10 6 2 2 1 1 3 4 5 5 4 2 3 2 1 1 3 4 6 5 3 4 6 5 2 2 1 3 1 5 4 7 6 7 4 6 5 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. 3) Rated current = 6A for receptacle with elbow (90) contacts for printed circuit. 4) Rated current = 12A for receptacle with elbow (90) contacts for printed circuit. 5) Only for FFL model. 104 First choice alternative Special order alternative LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Multicontact Contact type Standard Watertight Number of contacts o A (mm) Solder Crimp Printed circuit (straight) Printed circuit (elbow) Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 308 3S 3E 8 1.3 1.0 1.5 10 310 3S 3E 10 1.3 1.0 1.5 9 312 3S 3E 12 0.9 1.5 2.1 8 313 3S 3E 13 0.9 1.5 2.1 8 314 3S 3E 14 0.9 1.5 2.1 7 316 3S 3E 16 0.9 1.0 1.5 7 318 3S 3E 18 0.9 1.0 1.5 6 302 4S 4E 2 4.0 - - 2.1 3.0 35 303 4S 4E 3 3.0 - - 2.1 3.0 25 304 4S 4E 4 3.0 - - 2.1 3.0 22 305 4S 4E 2 3 3.0 2.0 - - 2.1 2.1 3.0 3.0 22 16 306 4S 4E 6 2.0 - 2.1 3.0 16 307 4S 4E 3 4 2.0 1.3 - - 2.1 2.1 3.0 3.0 16 13 308 4S 4E 8 1.3 - - 2.7 3.9 13 309 4S 4E 9 1.3 - - 2.1 3.0 12 310 4S 4E 10 1.3 - - 2.1 3.0 11 312 4S 4E 12 1.3 - - 2.1 3.0 9 313 4S - 13 1.3 - - 2.1 3.0 9 oA oA Reference Series Male solder contacts 3S 3E 3 Female solder contacts 2 2 4 3 1 1 4 5 8 8 6 7 3 1 9 8 2 6 1 1 3 6 1 7 4 4 7 8 8 11 12 3 4 12 1 1 4 4 7 8 8 11 12 1 5 9 9 4 8 12 13 16 13 4 14 12 5 12 3 7 1 16 13 11 14 8 10 12 11 3 11 13 6 7 11 12 1 2 3 7 10 1 1 4 9 5 5 9 14 10 10 14 15 18 4S 4E 5 7 7 4 10 8 3 3 1 9 10 6 6 2 2 4 5 5 7 18 15 1 1 2 2 2 1 1 2 3 3 2 1 1 2 3 4 4 3 2 3 2 1 3 1 4 5 5 2 3 4 2 1 3 1 6 4 6 5 3 2 4 4 5 2 3 1 4 1 7 5 3 7 6 2 4 2 5 6 3 1 4 1 8 5 8 6 4 7 5 7 3 2 6 2 5 3 4 1 5 1 9 6 4 9 7 3 2 8 2 5 3 5 6 6 10 8 10 9 4 3 9 3 11 12 9 7 8 10 9 2 5 6 7 9 3 8 4 1 1 10 13 6 4 11 12 10 8 2 3 1 12 7 4 2 8 1 11 6 7 2 5 5 7 4 1 1 7 6 8 10 13 5 11 12 6 9 8 7 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. First choice alternative Special order alternative LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 105 (R) (R) Multicontact Contact type Standard Watertight Number of contacts o A (mm) Solder Printed circuit (straight) Printed circuit (elbow) Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 314 4S 4E 14 1.3 - 2.1 3.0 9 316 4S 4E 16 0.9 - 2.1 3.0 7 318 4S 4E 18 0.9 - 2.1 3.0 7 320 4S 4E 20 0.9 - 2.1 3.0 7 322 4S 4E 22 0.9 - 2.1 3.0 7 324 4S 4E 24 0.9 - 2.1 3.0 7 302 5S 5E 2 6.0 - - 3.7 5.2 50 303 5S 5E 1 2 6.0 4.0 - - 3.7 3.7 5.2 5.2 50 35 304 5S 5E 4 4.0 - - 3.7 5.2 35 305 5S 5E 2 3 4.0 3.0 - - 3.0 3.0 4.2 4.2 35 25 306 5S 5E 6 3.0 - - 3.0 4.2 25 308 5S 5E 8 3.0 - - 2.1 3.0 22 310 5S 5E 10 2.0 - - 2.1 3.0 18 oA oA Reference Series Male solder contacts 4S 4E 3 4 5 Female solder contacts 3 2 2 12 4 1 11 11 12 14 13 1 5 10 6 13 14 10 9 7 4 8 1 8 9 1 5 12 9 16 4 5 15 4 4 18 6 2 1 22 7 4 15 17 18 1 21 16 20 21 7 12 13 18 22 17 21 22 24 1 1 2 2 1 1 2 3 2 1 1 2 3 4 4 3 2 2 1 3 4 3 1 5 5 4 2 2 3 1 1 3 4 6 6 4 5 5 2 2 1 8 4 5 6 6 11 3 4 3 3 2 12 17 8 5S 5E 1 7 22 2 20 3 13 18 24 5 3 8 17 21 18 10 12 17 1 9 14 15 7 16 20 12 3 11 16 11 3 1 6 11 16 20 4 10 6 15 17 1 5 10 18 10 16 5 14 1 12 13 1 9 3 8 9 13 7 8 4 5 6 3 4 5 1 8 7 7 4 6 3 2 2 5 3 4 1 1 5 6 6 10 7 8 9 10 7 9 8 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. 106 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Multicontact Contact type Standard Watertight Number of contacts o A (mm) Solder Printed circuit (straight) Printed circuit (elbow) Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 312 5S 5E 12 2.0 - - 2.1 3.0 18 314 5S 5E 2 12 3.0 2.0 - - 1.8 1.8 2.4 2.4 20 15 316 5S 5E 16 2.0 - - 1.8 2.4 15 318 5S 5E 2 16 3.0 1.6 - - 1.8 1.8 2.4 2.4 18 11 320 5S 5E 20 1.6 - - 1.8 2.4 11 322 5S 5E 2 20 3.0 1.6 - - 1.8 1.8 2.4 2.4 16 9 324 5S 5E 24 1.6 - - 2.7 3.9 9 330 5S 5E 30 1.3 - - 1.8 2.4 8 336 5S 5E 36 1.3 - - 1.8 2.4 7 340 5S 5E 40 1.3 - - 1.2 1.8 7 344 5S 5E 44 1.3 - - 1.2 1.8 6 348 5S 5E 48 1.3 - - 1.2 1.8 6 oA oA Reference Series Male solder contacts 5S 5E 4 Female solder contacts 3 3 5 6 7 4 5 12 12 3 2 5 1 7 8 9 10 4 3 3 5 7 14 13 15 16 2 7 17 1 8 9 16 16 10 18 15 15 11 14 14 13 9 10 6 1 12 7 5 9 11 6 8 11 4 3 2 18 15 11 3 10 14 16 10 4 17 13 12 12 9 5 5 1 1 8 7 4 2 2 6 8 6 14 11 10 6 13 12 12 11 9 4 1 14 8 9 10 3 13 8 11 10 2 7 6 7 11 9 6 5 1 1 8 4 2 2 5 6 12 13 4 4 3 7 3 18 17 2 8 5 2 6 17 18 20 19 7 1 8 9 1 9 19 20 12 7 13 15 9 3 18 2 17 20 22 21 12 14 1 13 13 9 16 16 15 22 1 12 12 25 19 19 1 13 28 21 21 1 44 15 23 23 39 14 22 30 37 38 4 1 3 17 25 25 44 43 9 10 17 33 40 46 7 31 38 4 32 1 8 15 31 43 45 48 2 8 37 10 40 2 30 1 28 34 35 14 16 20 29 29 35 24 12 7 13 7 25 31 36 6 1 7 22 18 32 20 40 11 26 26 32 36 5 6 6 18 31 34 30 1 11 6 28 29 29 12 8 23 23 24 2 3 9 5 21 22 22 3 28 17 18 1 22 7 12 18 24 3 4 8 1 8 11 12 13 8 21 15 8 9 4 17 3 21 15 7 9 20 1 12 30 22 10 15 3 2 19 14 13 12 6 18 17 16 16 10 13 5 7 1 1 11 4 3 19 11 14 14 4 2 8 10 15 11 5 6 16 16 10 16 24 32 33 39 40 46 45 48 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 107 (R) (R) Multicontact Standard Watertight Number of contacts o A (mm) Solder contacts Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 303 - 6E 3 6.0 3.0 4.2 50 304 6S 6E 4 8.0 3.0 4.2 60 6S - 12 4.0 2.1 3.0 22 - 6E 12 5.0 316 - 6E 16 3.0 1.5 2.1 14 318 6S - 18 4.0 1.2 1.8 16 320 6S - 20 3.0 1.5 2.1 14 320 - 6E 20 3.0 1.5 2.1 14 oA oA Reference Series Male solder contacts 6S 6E Female solder contacts 1 1 2 3 3 2 2 1 1 2 3 4 4 3 4 2 3 2 5 11 6 4 11 1 3 9 2 12 9 13 6 8 9 6 14 16 17 2 1 2 10 16 19 20 4 3 3 6 16 15 16 20 7 5 11 11 19 18 6 6 10 5 13 10 14 15 5 9 17 1 2 6 10 18 4 5 2 2 15 16 1 1 17 9 6 17 7 15 18 18 8 6 7 1 16 14 3 3 5 13 15 1 13 12 16 8 7 2 4 11 9 1 15 5 5 10 1 16 14 8 3 2 10 312 7 9 8 5 10 10 7 11 5 6 12 12 4 3 1 19 20 11 12 14 13 10 14 20 19 13 12 11 8 9 10 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. 108 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Multicontact Standard Watertight Number of contacts o A (mm) Solder contacts Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 324 6S - 24 3.0 1.2 1.8 12 324 - 6E 24 3.0 1.2 1.8 12 330 6S 6E 30 2.0 2.1 3.0 10 332 - 6E 32 2.0 1.5 2.1 10 336 6S - 36 2.0 1.5 2.1 8 336 - 6E 30 6 1.3 5.0 1.5 1.5 2.1 2.1 4 22 340 - 6E 40 2.0 1.5 2.1 8 oA oA Reference Series Male solder contacts 6S 6E 3 Female solder contacts 1 1 7 8 12 17 13 21 18 24 5 18 21 13 17 22 5 19 2 18 21 24 22 23 1 2 16 1 12 13 19 21 16 26 22 30 4 9 15 16 21 22 26 27 30 1 5 24 8 16 9 17 28 17 24 25 25 28 29 29 1 7 4 5 9 3 13 12 1 8 32 14 10 27 16 32 1 4 12 10 11 5 10 15 4 23 1 5 9 22 24 15 1 4 21 17 14 9 8 20 18 16 15 11 6 7 3 17 10 24 4 3 20 9 12 4 6 8 7 8 22 7 3 4 4 3 4 8 7 8 12 18 13 13 18 24 19 19 24 29 25 33 25 30 36 1 5 5 11 6 12 30 12 21 36 36 1 6 11 20 21 30 35 31 36 32 34 33 1 1 7 12 31 35 34 6 33 34 20 32 29 30 34 33 6 12 7 20 13 13 20 28 21 21 28 34 29 40 35 29 34 35 40 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 109 (R) (R) Multicontact Standard Watertight Number of contacts o A (mm) Solder contacts Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 348 6S 6E 48 2.0 1.5 2.1 7 360 6S 6E 60 1.6 1.5 2.1 5 362 - 6E 62 1.6 1.5 2.1 5 364 6S 6E 64 1.3 1.2 1.8 4 372 6S 6E 72 1.3 1.2 1.8 4 106 - 6E 106 0.9 0.8 1.2 2 106 6S - 106 0.9 0.8 1.2 2 oA oA Reference Series Male solder contacts 6S 6E 3 Female solder contacts 1 1 4 9 16 10 24 39 17 17 25 25 16 24 32 33 33 39 40 48 9 10 32 45 3 4 40 45 46 46 6 1 1 13 14 30 39 47 13 14 22 22 31 31 40 54 6 7 7 21 21 30 39 40 48 60 47 48 54 55 55 60 1 1 7 2 2 14 8 15 22 40 23 22 32 32 31 40 48 41 49 61 14 15 23 41 48 55 7 8 31 49 55 56 56 61 62 62 5 1 1 13 14 32 42 51 23 23 22 33 33 32 42 43 51 52 64 52 60 1 3 18 36 55 27 37 37 47 26 36 46 47 56 55 56 64 1 3 36 37 48 37 48 70 60 60 80 89 71 81 26 36 47 59 70 71 81 90 80 89 90 98 97 98 105 1 4 4 30 41 53 65 77 95 87 96 11 20 30 31 42 42 54 54 66 86 3 21 31 76 1 106 12 21 104 104 105 12 106 17 27 47 59 20 9 18 27 104 2 10 18 97 72 1 3 10 17 106 70 71 26 3 63 64 71 2 9 17 18 27 46 70 9 10 26 63 2 3 10 72 64 1 9 103 59 60 17 11 13 14 43 59 5 6 6 22 2 48 41 53 65 66 76 77 86 87 95 96 104 106 103 Note: 1) See calculation method, caution and suggested standard on page 204. 2) Lowest measured value; contact to contact or contact to shell. 110 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Housings (S and E series) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (R) ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Surface treatment Ref. C D N K S T U L B H G P R Material Note Latch sleeve and grounding crown Outer shell and collet nut Brass1) Brass Brass Brass Stainless steel Stainless steel Stainless steel2) Aluminium alloy3) POM black4) PPS/brass5) PEEK4) PSU6) PPSU7) chrome gold-plated nickel black chrome without treatment without treatment without treatment anodized without treatment without treat./nickel without treatment without treatment without treatment nickel nickel nickel nickel nickel-plated brass stainless steel stainless steel nickel-plated brass nickel-plated brass nickel nickel-plated brass nickel-plated brass nickel-plated brass @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Ref. L T T Material or form Note PEEK PTFE 1) FEP 2) First choice alternative V N Note: 1) In the E series the latch sleeve is chrome-plated. 2) The other metallic components are in stainless steel. 3) The variant position of the reference is used to specify the anodized color. 4) Only available for FFP, ERN and PCP models of the S series. 5) For S series EPL and EXP elbow (90) receptacles for printed circuit. 6) Available only for the FFL model of the S series. See colors in variant position. 7) Available only for the FFL model of the S series. Detailed characteristics of these materials are presented on page 198. First choice alternative Special order alternative Insulators (S and E series) @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Ref. Material or form Note 2) PI PA6.6 3) Note: 1) Only for single contact types. 2) Only for multicontact types. 3) Material for 5S/5E and 6S/6E series multicontact inserts. Detailed characteristics of these materials are presented on page 201. Special order alternative @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Contacts for plugs, free or fixed receptacles Contacts (S and E series) Contacts for couplers and plug with receptacle Ref. Contact type Ref. A C L M N V Male solder Male crimp 1) 4) Female solder Female crimp 2) 4) Female printed circuit (straight) Female printed circuit (elbow) A L M F Contact type Male - Female Female - Male Female - Female Female - Female - Male 3) single contact multicontact - For RAD and SWH fixed couplers, the first contact type mentioned is always the one at the flange end. Contact configuration and receptacles to be used for a connection are explained on the following page. Multicontact connectors are fitted with hermaphroditic inserts including male and female contacts. However, by convention, the letter indicating the contact type in the part number composition will be the male contact (reference A) for plugs and female contact (reference L) for receptacles. Note: 1) For the FFS model of the 00 series and FFA or FFL models of the S series. 2) For the PSS model of the 00 series and PCA or PSA models of the S series. 3) For the FTA model of the S series. 4) For conductor range that can fit with crimp contacts consult page 9. In case of an odd number of contacts, the letter of reference corresponds to the one with the larger number of contacts. For example, a 309 type connector with contact (reference A) will include 5 male and 4 female contacts. Connectors can be configured inverted i.e. plugs equiped with female contacts (reference L), receptacles with male contacts (reference A). This solution is particularly useful when plugs are mated to a coupler and it is essential to respect contact alignment (see next page). LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 111 (R) (R) Contact configuration for RMA, RAD and SWH fixed couplers A A A Single contact 2 1 Multicontact (odd) 1 2 Reference for plug A Reference for plug Reference for plug Single contact Reference for plug L M Female - Male L A L A Female - Female Reference for plug L Male - Female Reference for plug A A Single contact 1 2 Multicontact (odd) 2 1 A1) 3 1 A1) 4 6 3 3 3 3 2 2 2 2 3 1 4 6 Multicontact (even) 5 1 3 6 4 5 A1) A 1 3 6 4 Multicontact (even) 5 5 Use of plugs for mating with RAD, RMA and SWH couplers Single contact type: Reference M For coupling two identical plugs fitted with male contact (contact reference A). Reference L For coupling a plug fitted with male contacts (contact reference A) at the flange end for RAD and SWH and an inverted plug fitted with female contacts (contact reference L) at the other end. Reference A For the inverted version of code L. Multicontact type: Reference L For coupling a standard plug (contact reference A) at the flange end for RAD and SWH and an inverted plug (contact reference as indicated in the above table) at the other end. Reference M For coupling two standard plugs (contact type A). Only available for RAD and RMA models. Note: 1) This connector combination does not allow for contact numbering. One of the plugs has to be cable mounted in a way to ensure correct signal continuity. 112 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Collets (S and E series) @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (R) ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ oA oA oB C, K and L type collets L type collets C or K type collets Reference 00 0S Collet Cable o Part number of the oversize collet and of the split center-pieces 3) Part number of the collet nut 3) 5) Type o oA oB max. min. Part number of the collet 1) C C C C C C K K C C C C C C L L L L L 15 17 22 27 29 31 37 42 16 19 22 27 29 31 17 22 27 29 31 1.5 1.7 2.2 2.7 2.9 3.1 3.7 4.2 1.6 1.9 2.2 2.7 2.9 3.1 1.7 2.2 2.7 2.9 3.1 - 1.5 - - 2.4 2.7 - 3.7 - 1.6 1.6 2.4 2.4 2.4 - - - - - 1.4 1.6 2.1 2.6 2.8 3.0 3.6 4.1 1.5 1.8 2.1 2.6 2.8 3.0 1.6 2.1 2.6 2.8 3.0 1.1 1.3 1.7 2.2 2.4 2.6 3.0 3.3 1.2 1.5 1.7 2.2 2.4 2.6 1.3 1.7 2.2 2.4 2.6 FFA.00.715.CN FFA.00.717.CN FFA.00.722.CN FFA.00.727.CN FFA.00.729.CN FFA.00.731.CN FFA.0S.737.CN FFA.0S.742.CN FFC.00.716.CN 2) FFC.00.719.CN 2) FFC.00.722.CN 2) FFC.00.727.CN 2) FFC.00.729.CN 2) FFC.00.731.CN 2) FFA.00.717.LN FFA.00.722.LN FFA.00.727.LN FFA.00.729.LN FFA.00.731.LN - - - - - - FFA.00.137.LCN FFA.00.137.LCN - - - - - - - - - - - FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC C C C C C C C K K K K K K C C C C C C C L L L L L L L 17 22 27 32 37 42 44 47 52 57 62 66 68 17 22 27 32 37 42 44 17 22 27 32 37 42 44 1.7 2.2 2.7 3.2 3.7 4.2 4.4 4.7 5.2 5.7 6.2 6.6 6.8 1.7 2.2 2.7 3.2 3.7 4.2 4.4 1.7 2.2 2.7 3.2 3.7 4.2 4.4 - - - - - 3.7 3.7 - - - 5.2 5.4 - - - - - - 3.7 3.7 - - - - - - - 1.6 2.1 2.6 3.1 3.6 4.1 4.3 4.6 5.1 5.6 6.1 6.5 6.7 1.6 2.1 2.6 3.1 3.6 4.1 4.3 1.6 2.1 2.6 3.1 3.6 4.1 4.3 1.3 1.7 2.2 2.7 3.0 3.3 3.5 3.8 4.3 4.8 5.3 5.9 6.0 1.3 1.7 2.2 2.7 3.0 3.3 3.5 1.3 1.7 2.2 2.7 3.0 3.3 3.5 FFA.0S.717.CN FFA.0S.722.CN FFA.0S.727.CN FFA.0S.732.CN FFA.0S.737.CN FFA.0S.742.CN FFA.0S.744.CN FFA.1S.747.CN FFA.1S.752.CN FFA.1S.757.CN FFA.1S.762.CN FFA.1S.766.CN FFA.1S.768.CN FLA.0S.717.CN 4) FLA.0S.722.CN 4) FLA.0S.727.CN 4) FLA.0S.732.CN 4) FLA.0S.737.CN 4) FLA.0S.742.CN 4) FLA.0S.744.CN 4) FFA.0S.717.LN FFA.0S.722.LN FFA.0S.727.LN FFA.0S.732.LN FFA.0S.737.LN FFA.0S.742.LN FFA.0S.744.LN - - - - - - - FFA.0S.137.LCN FFA.0S.137.LCN FFA.0S.137.LCN FFA.0S.137.LCN FFA.0S.137.LCN FFA.0S.137.LCN - - - - - - - - - - - - - - FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.132.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.131.LC FFA.1S.131.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.132.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.130.LC FFA.0S.132.LC Note: See following page for text of notes 1) through 5). All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 113 (R) (R) oA oA oB C, K and L type collets C or K type collet Reference 1S Collet L type collet Cable o Type o oA oB max. min. Part number of the collet 1) C C C C C C C C C C C C K K K K C C C C C C C C C C C C L L L L L L L L L L L L 17 22 27 32 37 42 47 52 57 62 66 68 72 77 82 87 17 22 27 32 37 42 47 52 57 62 66 68 17 22 27 32 37 42 47 50 52 57 62 66 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.6 6.8 7.2 7.7 8.2 8.7 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.6 6.8 1.7 2.2 2.7 3.2 3.7 4.2 4.7 5.0 5.2 5.7 6.2 6.6 - - - - - - - - - 5.2 5.4 - 6.7 6.7 6.7 6.7 - - - - - - - - - 5.2 5.4 5.5 - - - - - - - - - - - - 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.5 6.7 7.0 7.5 8.0 8.5 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.5 6.7 1.6 2.1 2.6 3.1 3.6 4.1 4.6 4.9 5.1 5.6 6.1 6.5 1.3 1.7 2.2 2.6 2.7 3.3 3.8 4.3 4.8 5.3 5.9 6.0 6.1 7.1 7.6 8.1 1.3 1.7 2.2 2.6 2.7 3.3 3.8 4.3 4.8 5.3 5.9 6.0 1.3 1.7 2.2 2.6 2.7 3.3 3.8 4.7 4.3 4.8 5.3 5.9 FFA.1S.717.CN FFA.1S.722.CN FFA.1S.727.CN FFA.1S.732.CN FFA.1S.737.CN FFA.1S.742.CN FFA.1S.747.CN FFA.1S.752.CN FFA.1S.757.CN FFA.1S.762.CN FFA.1S.766.CN FFA.1S.768.CN FFA.2S.772.CN FFA.2S.777.CN FFA.2S.782.CN FFA.2S.787.CN FLA.1S.717.CN 4) FLA.1S.722.CN 4) FLA.1S.727.CN 4) FLA.1S.732.CN 4) FLA.1S.737.CN 4) FLA.1S.742.CN 4) FLA.1S.747.CN 4) FLA.1S.752.CN 4) FLA.1S.757.CN 4) FLA.1S.762.CN 4) FLA.1S.766.CN 4) FLA.1S.768.CN 4) FFA.1S.717.LN FFA.1S.722.LN FFA.1S.727.LN FFA.1S.732.LN FFA.1S.737.LN FFA.1S.742.LN FFA.1S.747.LN FFA.1S.750.LN FFA.1S.752.LN FFA.1S.757.LN FFA.1S.762.LN FFA.1S.766.LN Part number of the oversize collet and of the split center-pieces 3) Part number of the collet nut 3) 5) - - - - - - - - - - - - FFA.1S.137.LCN FFA.1S.137.LCN FFA.1S.137.LCN FFA.1S.137.LCN - - - - - - - - - - - - - - - - - - - - - - - - FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.131.LC FFA.1S.131.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.131.LC FFA.1S.131.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.130.LC FFA.1S.131.LC Note: 1) For ordering collets separately. 2) These collets can only be used with the FLA model. 3) For ordering a K type collet separately, the oversize collet and the corresponding collet nut should also be ordered. 4) These collets should be used with FLA, FFP and PCP models. 5) For models with bend relief, the FFM..130.LC collet nut should be ordered (see page 120). All dimensions are in millimeters. 114 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) oA oA oB C, K and L type collets C or K type collet Reference 2S Collet L type collet Cable o Type o oA oB max. min. Part number of the collet 1) C C C C C C C C C C K K K K C C C C C C C C C C L L L L L L L L L 17 27 32 42 52 62 72 77 82 87 92 97 10 11 17 27 32 42 52 62 72 77 82 87 27 32 42 52 62 72 77 82 87 1.7 2.7 3.2 4.2 5.2 6.2 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 1.7 2.7 3.2 4.2 5.2 6.2 7.2 7.7 8.2 8.7 2.7 3.2 4.2 5.2 6.2 7.2 7.9 8.2 8.7 - - - - - - 6.7 6.7 6.7 6.7 8.7 8.7 8.7 9.0 - - - - - - 6.7 6.7 6.7 6.7 - - - - - - - - - 1.6 2.5 3.0 4.0 5.0 6.0 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 1.6 2.5 3.0 4.0 5.0 6.0 7.0 7.5 8.0 8.5 2.5 3.0 4.0 5.0 6.0 7.0 7.5 8.0 8.5 1.3 1.7 2.5 3.1 4.1 5.1 6.1 7.1 7.6 8.1 8.1 9.1 9.6 10.1 1.3 1.7 2.5 3.1 4.1 5.1 6.1 7.1 7.6 8.1 1.7 2.5 3.1 4.1 5.1 6.1 7.1 7.6 8.1 FFA.2S.717.CN FFA.2S.727.CN FFA.2S.732.CN FFA.2S.742.CN FFA.2S.752.CN FFA.2S.762.CN FFA.2S.772.CN FFA.2S.777.CN FFA.2S.782.CN FFA.2S.787.CN FFA.3S.792.CN FFA.3S.797.CN FFA.3S.710.CN FFA.3S.711.CN FLA.2S.717.CN 4) FLA.2S.727.CN 4) FLA.2S.732.CN 4) FLA.2S.742.CN 4) FLA.2S.752.CN 4) FLA.2S.762.CN 4) FLA.2S.772.CN 4) FLA.2S.777.CN 4) FLA.2S.782.CN 4) FLA.2S.787.CN 4) FFA.2S.727.LN FFA.2S.732.LN FFA.2S.742.LN FFA.2S.752.LN FFA.2S.762.LN FFA.2S.772.LN FFA.2S.777.LN FFA.2S.782.LN FFA.2S.787.LN Part number of the oversize collet and of the split center-pieces 3) Part number of the collet nut 3) 5) - - - - - - - - - - FFA.2S.137.LCN FFA.2S.137.LCN FFA.2S.137.LCN FFA.2S.137.LCN - - - - - - - - - - - - - - - - - - - FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC FFA.2S.130.LC Note: 1) For ordering collets separately. 3) For ordering a K type collet separately, the oversize collet and the corresponding collet nut should also be ordered. 4) These collets should be used with FLA, FFP and PCP models. 5) For models with bend relief, the FFM..130.LC collet nut should be ordered (see page 120). All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 115 (R) (R) oA oA oB C, K and L type collets C or K type collet Reference 3S Collet L type collet Cable o Type o oA oB max. min. Part number of the collet 1) C C C C C C C C C C K K C C C C C C C C C C L L L L L L L L L 32 42 52 62 72 82 92 97 10 11 12 13 32 42 52 62 72 82 92 97 10 11 42 52 62 72 82 92 97 10 11 3.2 4.2 5.2 6.2 7.2 8.2 9.2 9.7 10.2 10.7 12.2 13.2 3.2 4.2 5.2 6.2 7.2 8.2 9.2 9.7 10.7 10.7 4.2 5.2 6.2 7.2 8.2 9.2 9.7 10.2 10.7 - - - - - - 8.7 8.7 8.7 9.0 - 12.2 - - - - - - 8.7 8.7 8.7 9.0 - - - - - - - - - 3.0 4.0 5.0 6.0 7.0 8.0 9.0 9.5 10.0 10.5 12.0 13.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 9.5 10.5 10.5 4.0 5.0 6.0 7.0 8.0 9.0 9.5 10.0 10.5 2.5 3.1 4.1 5.1 6.1 7.1 8.1 9.1 9.6 10.1 11.1 12.1 2.5 3.1 4.1 5.1 6.1 7.1 8.1 9.1 9.8 10.1 3.1 4.1 5.1 6.1 7.1 8.1 9.1 9.6 10.1 FFA.3S.732.CN FFA.3S.742.CN FFA.3S.752.CN FFA.3S.762.CN FFA.3S.772.CN FFA.3S.782.CN FFA.3S.792.CN FFA.3S.797.CN FFA.3S.710.CN FFA.3S.711.CN FFA.4S.712.CN FFA.4S.713.CN FLA.3S.732.CN 4) FLA.3S.742.CN 4) FLA.3S.752.CN 4) FLA.3S.762.CN 4) FLA.3S.772.CN 4) FLA.3S.782.CN 4) FLA.3S.792.CN 4) FLA.3S.797.CN 4) FLA.3S.710.CN 4) FLA.3S.711.CN 4) FFA.3S.742.LN FFA.3S.752.LN FFA.3S.762.LN FFA.3S.772.LN FFA.3S.782.LN FFA.3S.792.LN FFA.3S.797.LN FFA.3S.710.LN FFA.3S.711.LN Part number of the oversize collet and of the split center-pieces 3) Part number of the collet nut 3) 5) - - - - - - - - - - FFA.3S.137.LCN FFA.3S.137.LCN - - - - - - - - - - - - - - - - - - - FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC FFA.3S.130.LC Note: 1) For ordering collets separately. 3) For ordering a K type collet separately, the oversize collet and the corresponding collet nut should also be ordered. 4) These collets should be used with FLA, FFP and PCP models. 5) For models with bend relief, the FFM..130.LC collet nut should be ordered (see page 120). All dimensions are in millimeters. 116 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) oA oA oB C, K and L type collets C or K type collet Reference 4S Collet L type collet Cable o Type o oA oB max. min. Part number of the collet 1) C C C C C C C C C K K K K K K K K K C C C C C C C C C L L L L L L L L L 52 62 72 82 92 10 11 12 13 14 15 16 17 18 19 20 21 22 52 62 72 82 92 10 11 12 13 52 62 72 82 92 10 11 12 13 5.2 6.2 7.2 8.2 9.2 10.2 11.2 12.2 13.2 14.2 15.2 16.2 17.2 18.2 19.2 20.2 21.2 22.2 5.2 6.2 7.2 8.2 9.2 10.2 11.2 12.2 13.2 5.2 6.2 7.2 8.2 9.2 10.2 11.2 12.2 13.2 - - - - - - - - 12.2 - - - - - - 19.7 19.7 19.7 - - - - - - - - 12.2 - - - - - - - - - 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 4.1 5.1 6.1 7.1 8.1 9.1 10.1 11.1 12.6 13.1 14.1 15.1 16.1 17.1 18.1 19.1 20.1 21.1 4.1 5.1 6.1 7.1 8.1 9.1 10.1 11.1 12.6 4.1 5.1 6.1 7.1 8.1 9.1 10.1 11.1 12.6 FFA.4S.752.CN FFA.4S.762.CN FFA.4S.772.CN FFA.4S.782.CN FFA.4S.792.CN FFA.4S.710.CN FFA.4S.711.CN FFA.4S.712.CN FFA.4S.713.CN FFA.5S.714.CN FFA.5S.715.CN FFA.5S.716.CN FFA.5S.717.CN FFA.5S.718.CN FFA.5S.719.CN FFA.5S.720.CN FFA.5S.721.CN FFA.5S.722.CN FLA.4S.752.CN 4) FLA.4S.762.CN 4) FLA.4S.772.CN 4) FLA.4S.782.CN 4) FLA.4S.792.CN 4) FLA.4S.710.CN 4) FLA.4S.711.CN 4) FLA.4S.712.CN 4) FLA.4S.713.CN 4) FFA.4S.752.LN FFA.4S.762.LN FFA.4S.772.LN FFA.4S.782.LN FFA.4S.792.LN FFA.4S.710.LN FFA.4S.711.LN FFA.4S.712.LN FFA.4S.713.LN Part number of the oversize collet and of the split center-pieces 3) Part number of the collet nut 3) 5) - - - - - - - - - FFA.4S.137.LCN FFA.4S.137.LCN FFA.4S.137.LCN FFA.4S.137.LCN FFA.4S.137.LCN FFA.4S.137.LCN FFA.4S.137.LCN FFA.4S.137.LCN FFA.4S.137.LCN - - - - - - - - - - - - - - - - - - FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC FFA.4S.130.LC Note: 1) For ordering collets separately. 3) For ordering a K type collet separately, the oversize collet and the corresponding collet nut should also be ordered. 4) These collets should be used with FLA, FFP and PCP models. 5) For models with bend relief, the FFM..130.LC collet nut should be ordered (see page 120). All dimensions are in millimeters. These notes also apply to the following page. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 117 (R) (R) oA oA oB C, K and L type collets C or K type collet Reference 5S 118 Collet L type collet Cable o Type o oA oB max. min. Part number of the collet 1) C C C C C C C C C C C C C C C C K K K K K K K K C C C C C C C C C C C C C C C C L L L L L L L L L L L L L 72 82 92 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 72 82 92 10 11 12 13 14 15 16 17 18 19 20 21 22 92 10 11 12 13 14 15 16 17 18 19 20 21 7.2 8.2 9.2 10.2 11.2 12.2 13.2 14.2 15.2 16.2 17.2 18.2 19.2 20.2 21.2 22.2 23.2 24.2 25.2 26.2 27.2 28.2 29.2 30.2 7.2 8.2 9.2 10.2 11.2 12.2 13.2 14.2 15.2 16.2 17.2 18.2 19.2 20.2 21.2 22.2 9.2 10.2 11.2 12.2 13.2 14.2 15.2 16.2 17.2 18.2 19.2 20.2 21.2 - - - - - - - - - - - - - 19.7 19.7 19.7 - - - - - 27.2 27.2 27.2 - - - - - - - - - - - - - 19.7 19.7 19.7 - - - - - - - - - - - - - 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 9.0 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 6.1 7.1 8.1 9.1 10.1 11.1 12.1 13.1 14.1 15.1 16.1 17.1 18.1 19.1 20.1 21.1 22.1 23.1 24.1 25.1 26.1 27.1 28.1 29.1 6.1 7.1 8.1 9.1 10.1 11.1 12.1 13.1 14.1 15.1 16.1 17.1 18.1 19.1 20.1 21.1 8.1 9.1 10.1 11.1 12.1 13.1 14.1 15.1 16.1 17.1 18.1 19.1 20.1 FFA.5S.772.CN FFA.5S.782.CN FFA.5S.792.CN FFA.5S.710.CN FFA.5S.711.CN FFA.5S.712.CN FFA.5S.713.CN FFA.5S.714.CN FFA.5S.715.CN FFA.5S.716.CN FFA.5S.717.CN FFA.5S.718.CN FFA.5S.719.CN FFA.5S.720.CN FFA.5S.721.CN FFA.5S.722.CN FFA.6S.723.CN FFA.6S.724.CN FFA.6S.725.CN FFA.6S.726.CN FFA.6S.727.CN FFA.6S.728.CN FFA.6S.729.CN FFA.6S.730.CN FLA.5S.772.CN 2) FLA.5S.782.CN 2) FLA.5S.792.CN 2) FLA.5S.710.CN 2) FLA.5S.711.CN 2) FLA.5S.712.CN 2) FLA.5S.713.CN 2) FLA.5S.714.CN 2) FLA.5S.715.CN 2) FLA.5S.716.CN 2) FLA.5S.717.CN 2) FLA.5S.718.CN 2) FLA.5S.719.CN 2) FLA.5S.720.CN 2) FLA.5S.721.CN 2) FLA.5S.722.CN 2) FFA.5S.792.LN FFA.5S.710.LN FFA.5S.711.LN FFA.5S.712.LN FFA.5S.713.LN FFA.5S.714.LN FFA.5S.715.LN FFA.5S.716.LN FFA.5S.717.LN FFA.5S.718.LN FFA.5S.719.LN FFA.5S.720.LN FFA.5S.721.LN Part number of the oversize collet and of the split center-pieces 3) Part number of the collet nut 3) - - - - - - - - - - - - - - - - FFA.5S.137.LCN FFA.5S.137.LCN FFA.5S.137.LCN FFA.5S.137.LCN FFA.5S.137.LCN FFA.5S.137.LCN FFA.5S.137.LCN FFA.5S.137.LCN - - - - - - - - - - - - - - - - - - - - - - - - - - - - - FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC FFA.5S.130.LC LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) oA oA oB C and L type collets C type collet Reference 6S Collet L type collet Cable o Type o oA oB max. min. Part number of the collet 1) C C C C C C C C C C C C C C C C C C C L L L L L L L L L L L L L L L L L L L 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 12.2 13.2 14.2 15.2 16.2 17.2 18.2 19.2 20.2 21.2 22.2 23.2 24.2 25.2 26.2 27.2 28.2 29.2 30.2 12.2 13.2 14.2 15.2 16.2 17.2 18.2 19.2 20.2 21.2 22.2 23.2 24.2 25.2 26.2 27.2 28.2 29.2 30.2 - - - - - - - - - - - - - - - - 27.2 27.2 27.2 - - - - - - - - - - - - - - - - - - - 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.0 24.0 25.0 26.0 27.0 28.0 29.0 30.0 11.1 12.1 13.1 14.1 15.1 16.1 17.1 18.1 19.1 20.1 21.1 22.1 23.1 24.1 25.1 26.1 27.1 28.1 29.1 11.1 12.1 13.1 14.1 15.1 16.1 17.1 18.1 19.1 20.1 21.1 22.1 23.1 24.1 25.1 26.1 27.1 28.1 29.1 FFA.6S.712.CN FFA.6S.713.CN FFA.6S.714.CN FFA.6S.715.CN FFA.6S.716.CN FFA.6S.717.CN FFA.6S.718.CN FFA.6S.719.CN FFA.6S.720.CN FFA.6S.721.CN FFA.6S.722.CN FFA.6S.723.CN FFA.6S.724.CN FFA.6S.725.CN FFA.6S.726.CN FFA.6S.727.CN FFA.6S.728.CN FFA.6S.729.CN FFA.6S.730.CN FFA.6S.712.LN FFA.6S.713.LN FFA.6S.714.LN FFA.6S.715.LN FFA.6S.716.LN FFA.6S.717.LN FFA.6S.718.LN FFA.6S.719.LN FFA.6S.720.LN FFA.6S.721.LN FFA.6S.722.LN FFA.6S.723.LN FFA.6S.724.LN FFA.6S.725.LN FFA.6S.726.LN FFA.6S.727.LN FFA.6S.728.LN FFA.6S.729.LN FFA.6S.730.LN Part number of the oversize collet and of the split center-pieces Part number of the collet nut - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC FFA.6S.130.LC Note: 1) For ordering collets separately. All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 119 (R) (R) Bend relief nut and bend relief Reference 00 0S 1S 2S 3S 4S Part number of the collet nut Bend relief to be used 1) Type o C C K L 15 to 31 16 to 31 37 to 42 17 to 31 FFM.00.130.LC FFM.00.130.LC FFM.0S.130.LC FFM.00.130.LC GMA.00.0.D GMA.00.0.D GMA.0B.0.D GMA.00.0.D C K L 27 to 42 47 to 62 27 to 42 FFM.0S.130.LC FFM.1S.130.LC FFM.0S.130.LC GMA.0B.0.D GMA.1B.0.D GMA.0B.0.D C K L 27 to 62 72 to 82 27 to 62 FFM.1S.130.LC FFM.2S.130.LC FFM.1S.130.LC GMA.1B.0.D GMA.2B.0.D GMA.1B.0.D C K L 42 to 82 92 to 10 42 to 82 FFM.2S.130.LC FFM.3S.130.LC FFM.2S.130.LC GMA.2B.0.D GMA.3B.0.D GMA.2B.0.D C K L 52 to 10 12 to 13 52 to 10 FFM.3S.130.LC FFM.4S.130.LC FFM.3S.130.LC GMA.3B.0.D GMA.4B.0.D GMA.3B.0.D C L 82 to 13 82 to 13 FFM.4S.130.LC FFM.4S.130.LC GMA.4B.0.D GMA.4B.0.D Note: 1) The bend relief is to be ordered separately (see pages 175 and 176). 120 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) oB oA C and K type collets Reference 0E 1E 2E Collet Cable o Part number of the oversize collet and of the split center-pieces 2) Part number of the collet nut 2) Type o oA oB max. min. Part number of the collet system 1) C C C C C C C C C 10 15 20 25 30 35 40 45 50 1.6 1.6 2.1 3.1 3.1 4.2 4.2 5.2 5.2 - - - - - 4.2 4.2 5.2 5.2 1.2 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 1.0 1.3 1.6 2.1 2.6 3.1 3.6 4.1 4.6 FFA.0E.710.CNS FFA.0E.715.CNS FFA.0E.720.CNS FFA.0E.725.CNS FFA.0E.730.CNS FFA.0E.735.CNS FFA.0E.740.CNS FFA.0E.745.CNS FFA.0E.750.CNS - - - - - - - - - FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC FFA.00.130.LC C C C C C C C C C C C K K K K 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 1.6 2.2 3.2 3.2 4.2 4.2 5.2 5.2 6.2 6.2 7.2 7.2 8.2 8.2 9.2 - - - - - - - - 6.2 6.2 6.7 - 8.2 8.2 8.6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 1.3 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 FFA.1E.715.CNS FFA.1E.720.CNS FFA.1E.725.CNS FFA.1E.730.CNS FFA.1E.735.CNS FFA.1E.740.CNS FFA.1E.745.CNS FFA.1E.750.CNS FFA.1E.755.CNS FFA.1E.760.CNS FFA.1E.765.CNS FFA.2E.770.CNS FFA.2E.775.CNS FFA.2E.780.CNS FFA.2E.785.CNS - - - - - - - - - - - FFA.1E.137.LCN FFA.1E.137.LCN FFA.1E.137.LCN FFA.1E.137.LCN FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.1E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC C C C C C C C C C C C C C C C K K K K 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 10 11 2.2 2.2 3.2 3.2 4.2 4.2 5.2 5.2 6.2 6.2 7.2 7.2 8.2 8.2 9.2 9.2 10.2 10.2 11.2 - - - - - - - - - - - - 8.2 8.2 8.6 - 10.2 10.2 10.6 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 11.0 1.3 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 10.1 FFA.2E.715.CNS FFA.2E.720.CNS FFA.2E.725.CNS FFA.2E.730.CNS FFA.2E.735.CNS FFA.2E.740.CNS FFA.2E.745.CNS FFA.2E.750.CNS FFA.2E.755.CNS FFA.2E.760.CNS FFA.2E.765.CNS FFA.2E.770.CNS FFA.2E.775.CNS FFA.2E.780.CNS FFA.2E.785.CNS FFA.3E.790.CNS FFA.3E.795.CNS FFA.3E.710.CNS FFA.3E.711.CNS - - - - - - - - - - - - - - - FFA.2E.137.LCN FFA.2E.137.LCN FFA.2E.137.LCN FFA.2E.137.LCN FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.2E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC Note: 1) For ordering the collet system separately. 2) For ordering a K type collet separately, the oversize collet and the corresponding collet nut should also be ordered. All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 121 (R) (R) Reference 3E 4E Collet Cable o oA oB C and K type collets Part number of the oversize collet and of the split center-pieces 2) Part number of the collet nut 2) Type o oA oB max. min. Part number of the collet system 1) C C C C C C C C C C C C C C C C K K K K K 30 35 40 45 50 55 60 65 70 75 80 85 90 95 10 11 11 12 13 14 15 3.2 4.2 4.2 5.2 5.2 6.2 6.2 7.2 7.2 8.2 8.2 9.2 9.2 10.2 10.2 11.2 12.3 13.8 13.8 15.3 15.3 - - - - - - - - - - - - - 10.2 10.2 11.2 - 13.8 13.8 15.3 15.3 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 11.0 12.0 12.8 13.5 14.0 15.0 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 10.1 10.6 12.1 12.9 13.6 14.1 FFA.3E.730.CNS FFA.3E.735.CNS FFA.3E.740.CNS FFA.3E.745.CNS FFA.3E.750.CNS FFA.3E.755.CNS FFA.3E.760.CNS FFA.3E.765.CNS FFA.3E.770.CNS FFA.3E.775.CNS FFA.3E.780.CNS FFA.3E.785.CNS FFA.3E.790.CNS FFA.3E.795.CNS FFA.3E.710.CNS FFA.3E.711.CNS FFA.4E.711.CNS FFA.4E.712.CNS FFA.4E.713.CNS FFA.4E.714.CNS FFA.4E.715.CNS - - - - - - - - - - - - - - - - FFA.3E.137.LCN FFA.3E.137.LCN FFA.3E.137.LCN FFA.3E.137.LCN FFA.3E.137.LCN FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.3E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC C C C C C C C C C C C C C C C C K K K K K K K K 50 55 60 65 70 75 80 85 90 95 10 11 12 13 14 15 16 17 18 19 20 21 22 23 6.3 6.3 6.3 7.3 7.3 8.3 8.3 9.3 9.3 10.8 10.8 12.3 13.8 13.8 15.3 15.3 17.8 17.8 19.8 19.8 21.8 21.8 23.8 23.8 - - - - - - - - - - - - 13.8 13.8 15.3 15.3 - - - - - - 23.8 23.8 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.5 12.0 12.8 13.5 14.0 15.0 16.5 17.5 18.5 19.5 20.5 21.5 22.5 23.5 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 9.1 9.6 10.6 12.1 12.9 13.6 14.1 15.6 16.6 17.6 18.6 19.6 20.6 21.6 22.6 FFA.4E.750.CNS FFA.4E.755.CNS FFA.4E.760.CNS FFA.4E.765.CNS FFA.4E.770.CNS FFA.4E.775.CNS FFA.4E.780.CNS FFA.4E.785.CNS FFA.4E.790.CNS FFA.4E.795.CNS FFA.4E.710.CNS FFA.4E.711.CNS FFA.4E.712.CNS FFA.4E.713.CNS FFA.4E.714.CNS FFA.4E.715.CNS FFA.4K.716.CNS FFA.4K.717.CNS FFA.4K.718.CNS FFA.4K.719.CNS FFA.4K.720.CNS FFA.4K.721.CNS FFA.4K.722.CNS FFA.4K.723.CNS - - - - - - - - - - - - - - - - FFA.4E.137.LCN 3) FFA.4E.137.LCN FFA.4E.137.LCN FFA.4E.137.LCN FFA.4E.137.LCN FFA.4E.137.LCN FFA.4E.137.LCN FFA.4E.137.LCN FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4E.130.LC FFA.4K.136.LC FFA.4K.136.LC FFA.4K.136.LC FFA.4K.136.LC FFA.4K.136.LC FFA.4K.136.LC FFA.4K.136.LC FFA.4K.136.LC Note: 1) For ordering the collet system separately. 2) For ordering a K type collet separately, the oversize collet and the corresponding collet nut should also be ordered. 3) In 4E series, the center-piece is made of one piece. All dimensions are in millimeters. 122 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Reference 5E 6E Collet Cable o oA oB C type collets Type o oA oB max. min. Part number of the collet system 1) Part number of the collet nut C C C C C C C C C C C C C C 10 11 12 13 14 15 16 17 18 19 20 21 22 23 11.8 11.8 13.8 13.8 15.8 15.8 17.8 17.8 19.8 19.8 21.8 21.8 23.8 23.8 - - - - - - - - - - - - 23.8 23.8 10.5 11.5 12.5 13.5 14.5 15.5 16.5 17.5 18.5 19.5 20.5 21.5 22.5 23.5 9.6 10.6 11.6 12.6 13.6 14.6 15.6 16.6 17.6 18.6 19.6 20.6 21.6 22.6 FFA.5K.710.CNS FFA.5K.711.CNS FFA.5K.712.CNS FFA.5K.713.CNS FFA.5K.714.CNS FFA.5K.715.CNS FFA.5K.716.CNS FFA.5K.717.CNS FFA.5K.718.CNS FFA.5K.719.CNS FFA.5K.720.CNS FFA.5K.721.CNS FFA.5K.722.CNS FFA.5K.723.CNS FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC FFA.5K.130.LC C C C C C C C C C C 14 15 16 17 18 21 22 23 27 30 14.2 15.2 15.7 16.7 18.2 23.2 23.2 23.2 27.2 30.2 - - - - - - - - - - 14.0 15.0 15.5 16.5 18.0 21.5 22.0 23.0 27.0 30.0 13.0 14.1 14.6 15.6 17.1 20.6 21.1 22.1 26.1 29.5 FFA.6E.714.CNS FFA.6E.715.CNS FFA.6E.716.CNS FFA.6E.717.CNS FFA.6E.718.CNS FFA.6E.721.CNS FFA.6E.722.CNS FFA.6E.723.CNS FFA.6E.727.CNS FFA.6E.730.CNS FGG.6E.130.LC FGG.6E.131.LC PKG.6E.131.LC PKG.6E.132.LC FGG.6E.132.LC FGG.6E.133.LC PKG.6E.133.LC FGG.6E.134.LC FGG.6E.135.LC FGG.6E.136.LC Note: 1) For ordering the collet system separately. Bend relief nut and bend relief Reference Part number of the collet nut Bend relief to be used 1) Type o 0E C 10 to 50 FFM.0E.130.LC GMA.0B.. 1E C K 15 to 65 70 to 85 FFM.1E.130.LC FFM.2E.130.LC GMA.1B.. GMA.2B.. 2E C K 15 to 85 90 to 11 FFM.2E.130.LC FFM.3E.130.LC GMA.2B.. GMA.3B.. 3E C K 30 to 10 11 to 15 FFM.3E.130.LC FFM.4E.130.LC GMA.3B.. GMA.4B.. 4E C 50 to 15 FFM.4E.130.LC GMA.4B.. Note: 1) The bend relief is to be ordered separately (see pages 175 and 176). All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 123 (R) (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Variant (S and E series) Anodized color The variant position of the reference is used to specify the anodized color according to the table below. Part number for connector with standard collet nut Ref. A J N Anodized color blue yellow black Ref. R T V Anodized color red natural green Part number for connector with bend relief backnut Ref. L X Anodized color black natural Note: Other anodizing colors are available for connectors with bend relief backnut. Please consult us. 124 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com F SERIES (watertight) (R) 126 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) F Series F series connectors have been specially developed to meet the most demanding requirements in terms of dimensions, weight and watertightness. This series provides customers with many features and benefits including: - Push-pull self-latching system for safe connection - Sealed to IP67 for environmental protection when mated according to IEC 60529 - Compact scoop-proof design and use of aluminium alloys - High shock and vibration resistance - Multicontact types with 2 to 66 contacts - Crimp or printed circuit contacts - Keys ensuring ease of blind mating - Color coded key options for system security Interconnections Straight receptacles Straight plug Watertight model Fixed receptacles Fixed receptacle EG PH EE PE FG HE FN EH PB Model Description EE EG EH FG FN Fixed receptacle, nut fixing, with keys (N, P, S or T), (back panel mounting) Fixed receptacle, nut fixing, with keys (N, P, S or T) Fixed receptacle, nut fixing, with keys (N, P, S, T, W or X) (back panel mounting) for printed circuits Straight plug with keys (N, P, S, T, W or X) Straight plug with keys (N, P or S) and lanyard release HE Fixed receptacle, nut fixing, for printed circuit, with keys (N, P, S, T, W or X), (back panel mounting) PB Straight receptacle with flange with keys (N, P, S, T, W or X), 2 holes fixing PE Straight receptacle, nut fixing, with keys (N, P, S, T, W or X), (back panel mounting) PH Straight receptacle with keys (N, P, S, T, W or X) Part Section Showing Internal Components Straight receptacle 1 2 3 4 5 6 outer shell grounding crown insulator female contact rear sealing gland front nut 5 3 2 4 1 6 1 4 5 3 5 2 Straight plug 6 1 2 3 4 5 6 outer shell latch sleeve insulator male contact gasket rear sealing gland LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 127 (R) (R) Technical Characteristics Mechanical and Climatic Characteristics Value Standard > 1000 cycles IEC 60512-5 test 9a up to 95% to 140 F +5 F, +392 F 10-2000 Hz, 15 g IEC 60512-4 test 6d 100 g, 6 ms IEC 60512-4 test 6c IP67 IEC 60529 15/200/21 IEC 60068-1 Endurance Humidity Operating temperature1) Vibration resistance Shock resistance Protection index (mated) Climatic category Note: 1) for the HEN model, operating temperature ranges from +5 F to +176 F. Available Models (series and types) Multicontact 0F 1F 2F 3F 4F 5F Model EEN EEP EES EET EGN EGP EGS EGT EHN EHP EHS EHT EHW EHX FGN FGP Multicontact 0F 1F 2F 3F 4F 5F Model FGS FGT FGW FGX FNN FNP FNS HEN HEP HES HET HEW HEX PBN PBP PBS PBT PBW PBX PEN PEP PES PET PEW PEX PHN PHP PHS PHT PHW PHX Multicontact 0F 1F 2F 3F 4F 5F Model Note: = available models by series and types Polarized Keying System F series connector model part numbers are composed of three letters. The LAST LETTER indicates the keys corresponding to a particular contact type. For example, straight plugs with N, P or W keys, are fitted with male contacts; whereas with S, T or X keys, plugs are fitted with female contacts. Receptacles with N, P or W keys, are fitted with female contacts; whereas with S, T or X keys, receptacles are fitted with male contacts. Nb of keys Series 0F to 2F Series 3F Angles Angles Contact type Color code 165 150 155 - 30 60 50 - 150 145 140 135 60 70 80 90 Note Plug Receptacle male male female female female female male male N P S T 3 Model Model Front view of a receptacle Nb of keys Front view of a receptacle Series 4F-5F W X First choice alternative 128 5 Angles 95 115 35 100 125 40 Color code 25 20 blue red blue yellow red green Contact type Note Plug Receptacle male female female male Special order alternative LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Part Number Example Straight plug FGN 0F 305 X L C Model: (page 130) = male crimp Contact: C M = female crimp Series: (page 130) Insulator: L = PEEK Type: (page 133) Outer shell: X = Avional FGN.0F.305.XLC = straight plug with key (code N), 0F series, multicontact with five contacts, Avional outer shell, PEEK insulator, male crimp contacts. Straight receptacle PEN 2F 310 X L M Model: (page 130) = male crimp Contact: C M = female crimp Series: (page 130) Insulator: L = PEEK Type: (page 133) Outer shell: X = Avional PEN.2F.310.XLM = straight receptacle with key (code N), (back panel mounting), 2F series, multicontact with 10 contacts, Avional outer shell, PEEK insulator, female crimp contacts. Fixed receptacle @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e @@@@@@@@e? @@@@@@@@e?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ HEN 1F 307 X L N @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ P ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@ ?@@@@@@@@?e@@@@@@@@e?@@@@@@@@?e@@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ Variant 1): P = potted Series: (page 131) C = male crimp = male printed circuit Contact 2): D M = female crimp N = female printed circuit Type: (page 133) Insulator: L = PEEK Model: (page 131) Outer shell: X = Avional HEN.1F.307.XLNP = fixed receptacle, nut fixing for printed circuit, key (code N), (back panel mounting), watertight, 1F series, multicontact with seven contacts, Avional outer shell, PEEK insulator, female printed circuit contacts. Note: 1) 2) Potting for HE only. HE available only in male or female to printed circuit. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 129 (R) (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Models - Series FG Straight plug with keys (N, P, S, T, W or X) Reference L M oA oB 8 Dimensions (mm) Model Series A B L M FG FG FG FG FGW FGX1) FGW FGX 0F 1F 2F 3F 4F 4F 5F 5F 12 14 17 19 26 26 35 35 9.0 10.7 14.0 16.0 21.2 21.2 30.2 30.2 27.5 27.5 27.5 27.5 30.0 30.7 30.0 30.0 18.0 18.1 18.2 18.2 20.8 20.8 20.8 20.8 Note: 1) The L length of this model is special. FN Straight plug with keys (N, P or S) and lanyard release Reference L Model Series FN 1F Dimensions (mm) A B L M N 19.3 10.7 27.5 18.1 140 M oA N oB 8 PH Straight receptacle with keys (N, P, S, T, W or X) Reference L oA oB 8 Dim. (mm) Model Series A B L PH PH PH PH PHS1) PHT1) PHW PHX1) PHW PHX 0F 1F 2F 3F 3F 3F 4F 4F 5F 5F 12 14 17 19 19 19 26 26 35 35 9.0 10.7 14.0 16.0 16.0 16.0 21.2 21.2 30.2 30.2 26.7 26.7 26.7 26.7 28.1 28.1 26.7 29.0 36.6 36.6 Note: 1) The L length of these models is special. 130 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) PE Straight receptacle, nut fixing, with keys (N, P, S, T, W or X), (back panel mounting) Dimensions (mm) Reference L S1 e oA M oB oC 8 S2 E maxi Model Series A B C e E L M S1 S2 PE PE PE PE PES1) PET1) PEW PEX1) PEW PEX 0F 1F 2F 3F 3F 3F 4F 4F 5F 5F 13 17 20 22 22 22 29 29 38 38 9.0 10.7 14.0 16.0 16.0 16.0 21.2 21.2 30.2 30.2 13 17 20 22 22 22 29 29 38 38 M10x0.75 M13x0.75 M16x1.00 M18x1.00 M18x1.00 M18x1.00 M24x1.00 M24x1.00 M33x1.00 M33x1.00 6.0 6.2 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 26.7 26.7 26.7 26.7 28.1 28.1 26.7 29.0 36.6 36.6 2.5 3.2 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 9.0 11.5 14.5 16.5 16.5 16.5 22.0 22.0 31.0 31.0 11 14 17 19 19 19 25 25 34 34 Panel cut-out (page 138) Note: 1) The L length of these models is special. PB Straight receptacle with flange with keys (N, P, S, T, W or X), 2 holes fixing Reference D L A H oB oC 8 Dimensions (mm) Model Series A B C d D H L M N PB PB PB PB PBS1) PBT1) PBW PBX1) PBW PBX 0F 1F 2F 3F 3F 3F 4F 4F 5F 5F 27 27 32 38 38 38 41 41 44 44 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 11 13 16 18 18 18 23 23 23 23 9.0 10.7 14.0 16.0 16.0 16.0 21.2 21.2 30.2 30.2 15 15 18 20 20 20 26 26 33 33 21.4 21.4 25.9 29.0 29.0 29.0 32.0 32.0 38.2 38.2 26.7 26.7 26.7 26.7 28.1 28.1 26.7 29.0 36.6 36.6 2 2 2 2 2 2 2 2 2 2 4 4 4 4 4 4 4 4 4 4 Panel cut-out (page 138) N M oC Note: 1) The L length of these models is special. EG Fixed receptacle, nut fixing, with keys (N, P, S or T) M oA e oB S3 E maxi Dimensions (mm) Reference L S1 Model Series A B e E L M S1 S3 EG EG EG EG EGS1) EGT1) 0F 1F 2F 3F 3F 3F 10 14 18 22 22 22 12.5 16.0 19.5 25.2 25.2 25.2 M9x0.6 M12x1.0 M15x1.0 M18x1.0 M18x1.0 M18x1.0 7 7 6 5 5 5 19.0 19.0 19.0 19.0 20.5 20.5 1.2 1.5 1.8 2.0 2.0 2.0 8.2 10.5 13.5 16.5 16.5 16.5 11 14 17 22 22 22 Panel cut-out (page 138) Note: 1) The L length of this model is special. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 131 (R) (R) EE Fixed receptacle, nut fixing, with keys (N, P, S or T), (back panel mounting) L Reference e S2 E maxi oA S1 M oB S3 Dimensions (mm) Model Series A B e E L M P S1 S2 EE EE EE EE EES1) EET1) 0F 1F 2F 3F 3F 3F 13 17 20 22 22 22 12 15 19 22 22 22 M10x0.75 M13x0.75 M16x1.00 M18x1.00 M18x1.00 M18x1.00 6.0 6.2 6.4 6.4 6.4 6.4 19.0 19.0 19.0 19.0 20.5 20.5 2.5 3.2 4.0 4.0 4.0 4.0 8.5 9.4 10.4 10.4 10.4 10.4 9.0 11.5 14.5 16.5 16.5 16.5 11 14 17 19 19 19 S3 10.5 14.0 16.0 20.0 20.0 20.0 P Panel cut-out (page 138) Note: 1) The L length of this model is special. EH Fixed receptacle, nut fixing, with keys (N, P, S, T, W or X), (back panel mounting) (printed circuit mounting possible) Reference L P 3 oA e oB S2 Dimensions (mm) Model Series A B e E H L2) M P S1 S2 EH EH EH EH EHS1) EHT1) EHW EHX1) EHW EHX1) 0F 1F 2F 3F 3F 3F 4F 4F 5F 5F 13 17 20 22 22 22 29 29 38 38 14 17 20 23 23 23 29 29 38 38 M10x0.75 M13x0.75 M16x1.00 M18x1.00 M18x1.00 M18x1.00 M24x1.00 M24x1.00 M33x1.00 M33x1.00 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 6.4 6.4 5.08 7.62 8.89 11.43 11.43 11.43 15.24 15.24 20.32 20.32 21.6 21.6 21.6 21.6 22.1 22.1 21.6 22.8 21.6 30.4 2.5 3.2 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 14.5 14.5 14.5 14.5 16.0 16.0 14.5 15.2 23.9 23.9 9.0 11.5 14.5 16.5 16.5 16.5 22.0 22.0 31.0 31.0 11 14 17 19 19 19 25 25 34 34 S1 E maxi Panel cut-out (page 138) Note: 1) The L length of these models is special. 2) In printed circuit version these dimensions are identical with the HEN model. Watertight model HEN fixed receptacles allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529 (unmated). They are fully compatible with all non-watertight models of the same series. HE Fixed receptacle, nut fixing, for printed circuit, with keys (N, P, S, T, W or X), (back panel mounting) Reference L 4 X e S2 E maxi S1 H oA P 3 o 0.9 oB 3 Dimensions (mm) Model Series A B e E H L M P S1 S2 X HE HE HE HE HES1) HET1) HEW HEX1) HEW HEX1) 0F 1F 2F 3F 3F 3F 4F 4F 5F 5F 13 17 20 22 22 22 29 29 38 38 14 17 20 23 23 23 29 29 38 38 M10x0.75 M13x0.75 M16x1.00 M18x1.00 M18x1.00 M18x1.00 M24x1.00 M24x1.00 M33x1.00 M33x1.00 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 6.4 6.4 5.08 7.62 8.89 11.43 11.43 11.43 15.24 15.24 20.32 20.32 21.6 21.6 21.6 21.6 22.1 22.1 21.6 22.8 21.6 30.4 2.5 3.2 4.0 4.0 4.0 4.0 5.0 5.0 5.0 5.0 14.5 14.5 14.5 14.5 16.0 16.0 14.5 15.2 23.9 23.9 9.0 11.5 14.5 16.5 16.5 16.5 22.0 22.0 31.0 31.0 11 14 17 19 19 19 25 25 34 34 16.5 16.5 16.5 16.5 18.0 18.0 16.5 18.2 16.5 26.4 Epoxy resin Panel cut-out (page 138) Note: 132 1) PCB drilling pattern (page 139) The L length of these models is special. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ (R) Type Multicontact Number of contacts o A (mm) Crimp Printed circuit AWG Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Rated current (A)1) 302 2 0.9 20-22-24 1.45 1.20 10.0 303 3 0.9 20-22-24 1.70 1.60 8.0 304 4 0.7 22-24-26 1.35 1.10 7.0 305 5 0.7 22-24-26 1.25 1.20 6.5 303 3 1.3 18-20 1.60 1.85 12.0 305 5 0.9 20-22-24 1.30 1.55 9.0 307 7 0.7 22-24-26 1.45 1.45 7.0 308 8 0.7 22-24-26 1.30 1.30 5.0 308 8 0.9 20-22-24 1.95 1.95 10.0 310 10 0.9 20-22-24 1.80 2.10 8.0 312 12 0.7 22-24-26 1.65 2.00 7.0 319 19 0.7 22-24-26 1.55 1.65 5.0 322 22 0.7 22-24-26 1.70 1.45 5.5 330 30 0.7 22-24-26 1.35 1.20 3.5 340 40 0.7 22-24-26 1.35 1.30 2.0 oA Reference Contact type Male crimp contacts 0F 1F 2F 3F Female crimp contacts 4F Note: 1) See calculation method, caution and suggested standard on page 204. Other types available on request, based on existing contact configurations of the B series. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 133 (R) (R) Multicontact Number of contacts o A (mm) Crimp Printed circuit AWG Test voltage (kV rms)1) Contact-contact Test voltage (kV rms)1) Contact-shell Rated current (A)1) 350 50 0.9 20-22-24 1.20 1.45 6.0 354 54 0.9 20-22-24 2.00 2.10 5.0 355 55 0.9 20-22-24 2.00 2.10 5.0 364 64 0.9 20-22-24 1.35 1.85 3.0 366 66 0.9 20-22-24 1.30 1.80 3.0 oA Reference Contact type Male crimp contacts Female crimp contacts 5F Note: 1) See calculation method, caution and suggested standard on page 204. Other types available on request, based on existing contact configurations of the B series. Accessories Crimp Contacts Contact part number Contact oA oC (mm) (mm) 134 female for plug FGG.0B.555.ZZC EGG.0B.655.ZZM FGG.0B.555.ZZC EGG.0B.655.ZZM FGG.0B.560.ZZC EGG.0B.660.ZZM FGG.0B.560.ZZC EGG.0B.660.ZZM 0.7 0.9 1.3 0.8 1.1 1.4 FGG.0B.555.ZZC EGG.0B.655.ZZM FGG.0B.555.ZZC EGG.0B.655.ZZM FGG.0B.560.ZZC EGG.0B.660.ZZM FGG.0B.560.ZZC EGG.0B.660.ZZM FGN.1F.565.ZZC EGN.1F.665.ZZM FGN.1F.565.ZZC EGN.1F.665.ZZM 2F 0.7 0.9 0.8 1.1 FGG.0B.555.ZZC EGG.0B.655.ZZM FGG.0B.555.ZZC EGG.0B.655.ZZM FGG.0B.560.ZZC EGG.0B.660.ZZM FGG.0B.560.ZZC EGG.0B.660.ZZM 3F 0.7 0.8 FGG.0B.555.ZZC EGG.0B.655.ZZM FGG.0B.555.ZZC EGG.1B.655.ZZM 4F 0.7 0.8 FGG.2B.555.ZZC EGG.0B.655.ZZM FGG.1B.555.ZZC EGG.2B.655.ZZM 5F 0.9 1.1 FGG.3B.560.ZZC EGG.3B.660.ZZM FGG.3B.560.ZZC EGG.3B.660.ZZM oC oC male for receptacle 0.8 1.1 1F oA female for receptacle 0.7 0.9 0F oA male for plug LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) BFN Cap for plug L Series BFN.1F.100 PCSG BFN.2F.100.PCSG 1F 2F B oA Part number N A Dimensions (mm) B L N 12.0 13.3 12.6 15.0 16.4 12.8 62 75 Body material: PA6.6 Cord material: Nylon Maximum operating temperature: 212F BRA Cap for receptacle L oB N oA M Straight boot Elbow boot BEFORE HEATING BEFORE HEATING Part number Series BRA.1F.200.PZSG BRA.2F.200.PZSG 1F 2F A Dimensions (mm) B L M 14.0 13.7 12.1 18.0 16.5 12.0 5.3 5.6 N 65.5 65.5 Body material: PA6.6 Band: PET Maximum operating temperature: 212F Heatshrink boot Elbow 90 cable o min. (mm) 222 A 111-25/86 222 A 111-25 222 A 121-25/86 222 A 121-25 222 A 142-25/86 222 A 142-25 1108-1-G 1106-1-G 1104-2-G 3.8 3.8 5.3 5.3 7.4 7.4 3.8 5.6 7.1 Part number Series Supplier Straight 202 A 111-25/861) 202 A 111-252) 202 A 121-25/861) 1F-2F-3F-4F 202 A 121-252) 202 A 142-25/861) 4F-5F 202 A 142-252) 0F-1F-2F-3F 104-1-G2) 1F-2F-3F-4F 105-1-G2) 101-1-G2) 4F-5F 0F-1F-2F-3F Raychem(R) AFTER HEATING AFTER HEATING Hellerman(R) Note: 1) Modified elastomer resistant to fluids with hot melt sealant. 2) Elastomer resistant to fluids. We recommend a thermosetting sealant with this type of boot. GRA Insulating washers Part number GRA.0F.269.G GRA.1F.269.G GRA.2F.269.G GRA.3F.269.G GRA.4F.269.G GRA.5F.269.G Ref. L oB M E maxi Color Series 0F 1F 2F 3F 4F 5F Keying A 15 19 22 24 31 40 Dimensions (mm) B E L M 12.0 15.0 18.5 20.5 27.5 36.5 4 4 4 4 4 4 Ref. 1.8 2.0 2.2 2.2 2.2 2.2 1.0 1.1 1.2 1.2 1.2 1.2 Color T 11 14 17 19 25 34 Keying oA T A J blue yellow N-W P R V red green S-X T Note: The last position "" of the part number indicates the color. To obtain the required color, refer to the above table and change position "" of the part number to the corresponding letter. For EG receptacles with a particular thread dimension, use B series insulating washers (see page 178). Material: Polyamide (PA.6) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 135 (R) (R) GEC Conical nut Part number Series GEC.0F.240.R GEC.1F.240.R GEC.2F.240.R GEC.3F.240.R GEC.4F.240.R GEC.5F.240.R A Ref. Color 0F 1F 2F 3F 4F 5F A 11 14 17 19 25 34 Dimensions (mm) B e 13 17 20 22 29 38 M10x0.75 M13x0.75 M16x1.00 M18x1.00 M24x1.00 M33x1.00 L 2.5 3.2 4.0 4.0 5.0 5.0 Keying L e oB A J R V blue yellow red green N-W P S-X T Note: The last position "" of the part number indicates the color. To obtain the required color, refer to the above table and change the position "" of the part number to the corresponding letter. Material: Avional Note: Other accessories are also available with the F series. See section Accessories on page 167. Tooling DPC Manual crimping tool Part number DPC.91.701.V According to specification MIL-C-22520/7-01. For LEMO contacts o 0.7-0.9-1.3 mm DCE Positioners for crimp contacts Connector Contact Conductor o AWG male female 1.3 18-20 0.9 20-22-24 0.7 22-24-26 Positioner part number Series For male contacts for plug 1F 0F 1F 2F 5F 0F 1F 2F 3F 4F DCE.91.131.FVC DCE.91.090.BVC DCE.91.090.BVC DCE.91.090.BVC DCE.91.093.BVC DCE.91.070.BVC DCE.91.070.BVC DCE.91.070.BVC DCE.91.070.BVC DCE.91.072.BVC For female For male contacts for receptacle contacts for receptacle DCE.91.131.FVM DCE.91.090.BVM DCE.91.090.BVM DCE.91.090.BVM DCE.91.093.BVM DCE.91.070.BVM DCE.91.070.BVM DCE.91.070.BVM DCE.91.070.BVM DCE.91.070.BVM DCE.91.131.FVC DCE.91.090.BVC DCE.91.090.BVC DCE.91.090.BVC DCE.91.093.BVC DCE.91.070.BVC DCE.91.070.BVC DCE.91.070.BVC DCE.91.070.BVC DCE.91.071.BVC For female contacts for plug DCE.91.131.FVM DCE.91.090.BVM DCE.91.090.BVM DCE.91.090.BVM DCE.91.093.BVM DCE.91.070.BVM DCE.91.070.BVM DCE.91.070.BVM DCE.91.071.BVM DCE.91.072.BVM Note: These positioners are suitable for use with both manual and pneumatic crimping tool according to the MIL-C-22520/7-01 standard. 136 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) DCF Extractor for crimp contact Extractors contact o 1.3 0.9 0.7 Part number DCF.91.131.2LT DCF.91.090.2LT DCF.91.070.2LT Note: This model is used for male and female contacts. Banding tool GLEN-AIR(R) Banding tool Tie wrap 600-061 600-057 Part number TIE-DEX(R) A30199 A31189 AXON(R) ACDBS100 AXCL0Z Note: The banding tool is to be used with screened cables to ensure a good ground contact. Note: Other tooling are also available with the F series. See section Tooling on page 183. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 137 (R) (R) Panel cut-outs Panel cut-outs Models EE-HE-PE-EG-EH PB EE EE EE EE - - L B +0.1 0 oA H oA + 0.1 0 L + 0.1 0 oB + 0.1 0 HE HE HE HE HE HE Series PE PE PE PE PE PE A Dimensions (mm) B L H 0F 1F 2F 3F 4F 5F 10.1 13.1 16.1 18.1 24.1 33.1 9.1 11.6 14.6 16.6 22.1 31.1 16.0 20.0 23.0 25.0 32.0 41.0 - - - - - - EG EG EG EG 0F 1F 2F 3F 9.1 12.1 15.1 18.2 8.3 10.6 13.6 16.6 13.5 17.0 21.5 27.0 - - - - PB PB PB PB PB PB 0F 1F 2F 3F 4F 5F 11.1 13.1 16.1 18.1 24.1 33.1 3.2 3.2 3.2 3.2 3.2 3.2 16.0 16.0 19.0 21.0 27.0 33.5 21.4 21.4 25.9 29.0 32.0 38.2 Mounting nut torque Series Torque (Nm) 0F 1F 2F 3F 4F 5F 1.0 1.5 2.0 2.5 5.0 8.0 138 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) PCB drilling patterns +0.1 0 5 x o 0.6 8 x o 0.6 2F.319 15 19 x o 0.6 +0.1 0 22 x o 0.6 15 7.62 +0.1 0 o19.2 o 8.36 40 o 3.1 120 o 7.94 4xo1 ' 40 20.32 +0.1 0 4xo1 2.2 11.43 18 ' o9 +0.1 0 +0.1 0 750' 2741 ' 9 15.24 2 51 o 11.64 6' +0.1 0 4xo1 5F.350 o 4.24 4xo1 o 5.7 22 30 1115' 1252' o5 +0.1 0 4F.340 36 2230' 4xo1 o 6.7 o 6.5 3F.330 6 30 90 8.89 o 6.2 12 x o 0.6 0 +0.1 0 o 2.8 4 +0.1 0 3F.322 +0.1 0 25 43 ' 2230' 4 x o 1 5 +0.1 0 45 45 o 2.15 45 10 x o 0.6 8 x o 0.6 8.89 2230' 4 x o 1 +0.1 0 o 3.5 2F.312 +0.1 0 o3 7.62 +0.1 0 +0.1 0 4xo1 o13.73 7 x o 0.6 45 11.43 4xo1 ' 25 51 8.89 +0.1 0 o 3.7 +0.1 0 2F.310 12 0 2F.308 +0.1 0 o 6.4 4xo1 30 +0.1 0 +0.1 0 3 x o 0.6 7.62 5 x o 0.6 5.08 o 2.8 +0.1 0 1F.308 60 o 3.4 +0.1 0 4xo1 o 8.8 4 x o 0.6 7.62 4xo1 72 +0.1 0 90 +0.1 0 1F.307 72 4xo1 1F.303 4xo1 8.89 1F.305 45 +0.1 0 o 3.8 3 x o 0.6 0F.305 5.08 o 2.3 12 0 +0.1 0 5.08 2 x o 0.6 4xo1 o 2.2 4xo1 0F.304 +0.1 0 5.08 0F.303 +0.1 0 o 2.5 0F.302 +0.1 0 50 x o 0.8 4 x o 1.3 60 18 57 ' 4xo1 20.32 o19.4 o9 o14.2 o 3.8 20.32 o19.4 o14.2 o9 36 o 3.8 36 655' 27 +0.1 0 41 ' 30 22 ' 54 x o 0.8 ' 50 3 20.32 730' 1 15 o19.84 4xo1 730' 90 90 15 5F.364 +0.1 0 o14.96 5F.355 +0.1 0 o 10.08 5F.354 +0.1 0 o 5.05 40 x o 0.6 2.6 +0.1 0 24 30 x o 0.6 55 x o 0.8 +0.1 0 +0.1 0 2111' 64 x o 0.8 +0.1 0 5F.366 655' 4 x o 1.3 +0.1 0 2 7 20.32 o19.84 o14.96 o 10.08 o 5.6 18 57 ' ' 26 51 ' 1 5 13 42 ' 66 x o 0.8 +0.1 0 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 139 (R) 140 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 2G SERIES 2C SERIES (R) 142 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) 2C Series In many applications, it is necessary to use multicontact connectors which have shortened dimensions but require high contact density. LEMO short series connectors, which are shorter than 30 mm, perfectly meet these needs. The 2C series, featuring a hermaphroditic insert, is available in multicontact type up to 14 contacts. Interconnections Fixed plug Straight plugs Fixed receptacles Free receptacles FFA PCA ERA FAA EEP FFA PCA ECP Fixed receptacle ERY Watertight or vacuum-tight models Fixed receptacles ECP PSA HEP HGP Model Description ECP Fixed receptacle with two nuts (back panel mounting) ECP Fixed receptacle with two nuts, straight contact for printed circuit (back panel mounting) EEP Fixed receptacle, nut fixing (back panel mounting) ERA Fixed receptacle, nut fixing ERY Fixed receptacle, protruding shell (screw fixing on the panel) FAA Fixed plug, nut fixing, non-latching FFA Straight plug, cable collet FFA Straight plug, cable collet and nut for fitting a bend relief HEP Fixed receptacle, nut fixing, watertight or vacuum-tight (back panel mounting) HGP Fixed receptacle, nut fixing, watertight or vacuum-tight PCA Free receptacle, cable collet PCA Free receptacle, cable collet and nut for fitting a bend relief PSA Fixed receptacle nut fixing, cable collet Part Section Showing Internal Components Straight plug Fixed receptacle 6 4 2 3 1 5 7 6 2 5 4 1 8 3 1 1 2 3 4 5 6 outer shell hexagonal nut locking washer insulator male contact female contact 2 3 4 5 6 7 8 outer shell latch sleeve collet nut split center-piece insulator male contact female contact collet Technical Characteristics Mechanical and Climatic Characteristics Endurance Humidity Temperature range1) Salt spray corrosion test Protection index Climatic category Value Standard > 500 cycles IEC 60512-5 test 9a up to 95% at 140 F -67 F +482 F > 144 h IEC 60512-6 test 11f IP50 IEC 60529 55/175/21 IEC 60068-1 Note: Various tests have been carried out with FFA and ERA connector pairs, with chromeplated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 197. 1) For watertight or vacuum-tight models: -4 F, +176 F LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 143 (R) (R) Part Number Example Straight plug with cable collet FFA 2C 306 C L A C 27 Model: (page 145) Series: 2C Variant: see note 1) Type: (page 148) Collet o: (page 149) Housing: (page 148) Cable fixing type: (page 149) Insulator: L = PEEK Contact: (page 148) FFA.2C.306.CLAC27 = straight plug with cable collet, 2C series, multicontact type with six contacts, outer shell in chromeplated brass, PEEK insulator, male solder contacts, C type collet for 2.7 mm diameter cable. Fixed receptacle ERA 2C 310 C L L Model: (page 145) Series: 2C Variant: see note 1) Type: (page 148) Contact: (page 148) Housing: (page 148) Insulator: L = PEEK ERA.2C.310.CLL = fixed receptacle, nut fixing, 2C series, multicontact type with 10 contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Free receptacle PCA 2C 314 C L L C 72 Model: (page 146) Series: 2C Variant: see note 1) Type: (page 148) Collet o: (page 149) Housing: (page 148) Cable fixing type: (page 149) Insulator: L = PEEK Contact: (page 148) PCA.2C.314.CLLC72 = straight receptacle with cable collet, 2C series, multicontact type with 14 contacts, outer shell in chromeplated brass, PEEK insulator, female contacts solder, C type collet for 7.2 mm diameter cable. Note: 1) The Variant position in the reference is used to specify either the presence of a collet nut for fitting the bend relief or the anodized color of the housing in aluminium alloy. For models with collet nut for fitting the bend relief, a Z should be indicated and a bend relief can be ordered separately as indicated in the Accessories section. An order for a connector with bend relief should thus include two part numbers. For the various housings available in colors, the corresponding letter in the part number for the color is indicated on page 148. For the watertight models of receptacle, the letter P is used; for the vacuum-tight models of receptacle the letters PV shall be indicated. 144 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Models - Series @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (R) ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ FFA.2C Straight plug, cable collet FFA.2C Straight plug, cable collet and nut for fitting a bend relief ~30 28.4 ~22 o 14 o 14 20.4 S 12 S 10.5 Note: The bend relief must be ordered separately (see page 175). FAA.2C Fixed plug, nut fixing, non-latching ERA.2C Fixed receptacle, nut fixing 15.6 maxi 17 maxi S 17 o 18 o 19.6 o 18 2 maxi 2 M15 x 1 9.5 M15 x 1 o 19.5 S 17 S 13.8 S 13.8 5 maxi Panel cut-out (page 150) Panel cut-out (page 150) ECP.2C Fixed receptacle with two nuts (back panel mounting) ECP.2C Fixed receptacle with two nuts, straight contact for printed circuit (back panel mounting) Panel cut-out (page 150) 12.5 4.2 maxi S 13.5 Panel cut-out (page 150) 3.5 M15 x 1 M15 x 1 o 19.5 S 17 o 20 M15 x 1 M15 x 1 o 19.5 S 13.5 3.5 o 20 3 15.6 maxi S 17 4.2 maxi PCB drilling pattern (page 150) Note: All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 145 (R) (R) EEP.2C Fixed receptacle, nut fixing (back panel mounting) ERY.2C Fixed receptacle, protruding shell, (screw fixing on the panel) 15.6 maxi S 13.5 M13 x 0.75 15.6 maxi 8.5 o 14 o 20 o 19.5 M15 x 1 3.5 4.2 maxi 9.5 Panel cut-out (page 150) Panel cut-out (page 150) PCA.2C Free receptacle, cable collet PCA.2C Free receptacle, cable collet and nut for fitting a bend relief ~28 o 14 o 14 26.4 S 12 S 10.5 Note: The bend relief must be ordered separately (see page 175). PSA.2C Fixed receptacle nut fixing, cable collet ~28 S 10.5 S 13.8 o 19.5 2 o 18 M15 x 1 S 17 5 maxi Panel cut-out (page 150) Note: All dimensions are in millimeters. 146 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Watertight or vacuum-tight models HGP and HEP receptacles allow the device on which they are fitted to reach a protection index of IP68 as per IEC 60529. They are fully compatible with plugs of the same series and are widely used for portable radios, military, laboratory equipment, aviation, etc. These models are identified by a letter P at the end of the reference. These models are also available in a vacuum-tight version. Such models are identified by an additional letter V at the end of the part number (certificate on request). Epoxy resin is used to seal these models. Please refer to page 8 to locate the chapter on selecting watertight connectors. Technical Characteristics Mechanical and Climatic Characteristics Endurance Humidity Temperature range Salt spray corrosion test Protection index (mated) Climatic category Leakage rate (He)1) Maximum operating pressure Value Standard > 500 cycles IEC 60512-5 test 9a up to 95% at 140 F -4 F, +176 F > 144h IEC 60512-6 test 11f IP 68 IEC 60529 20/80/21 IEC 60068-1 < 10-6 mbar.l.s-1 IEC 60512-7 test 14b 5 bars IEC 60512-7 test 14d Part number example: Watertight receptacle - HGP.2C.304.CLLP Vacuum-tight receptacle - HGP.2C.304.CLLPV Note: 1) only for vacuum-tight models. HGP.2C Fixed receptacle, nut fixing, watertight or vacuum-tight HEP.2C Fixed receptacle, nut fixing, watertight or vacuum-tight (back panel mounting) 20 maxi 20 maxi 10.6 4 S 17 5 maxi 5.2 maxi Panel cut-out (page 150) 3.5 M15 x 1 o 20 o 20 o 19.5 M15 x 1 5.7 o 20 S 13.8 S 13.8 Panel cut-out (page 150) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 147 (R) (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Number of contacts o A (mm) Solder Printed circuit Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 302 2 1.6 - 1.80 2.40 20 303 3 1.3 - 1.50 2.10 15 304 4 1.3 - 1.80 2.40 15 306 6 1.3 - 1.50 2.10 12 308 8 0.7 0.95 1.35 7 310 10 0.7 0.95 1.35 7 312 12 0.7 0.60 0.90 5 314 14 0.7 0.60 0.90 5 oA oA Reference Contact type Male solder contacts 2 Female solder contacts 1 1 2 2 1 1 2 3 3 1 4 2 3 2 3 2 1 1 3 4 6 6 5 4 3 2 2 1 6 4 3 5 6 7 4 5 5 7 2 8 2 3 1 11 8 7 4 9 10 5 6 1 3 2 7 10 6 11 12 1 3 8 11 7 4 14 12 1 3 7 4 7 6 3 12 11 7 4 5 8 1 10 3 1 8 2 9 1 10 8 6 Note: 2 3 1 4 12 14 1) See calculation method, caution and suggested standard on 2) Lowest measured value; contact to contact or contact to shell. page 204. @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Housings @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Surface treatment Ref. C N K L Material Brass Brass Brass Aluminium alloy1) Note Latch sleeve and grounding crown Outer shell and collet nut chrome nickel black chrome anodized nickel nickel nickel nickel-plated @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Ref. A L N 148 @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Note: 1) The Variant position of the reference is used to specify the anodized color. First choice alternative Special order alternative Contact Contact type Male solder Female solder Female printed circuit Multicontact connectors are fitted with hermaphroditic inserts including male and female contacts. However, by convention, the letter indicating the contact type in the part number composition will be the male contact (reference A) for plugs and female contact (reference L) for receptacles. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Reference Collets Long collet Collet o Cable o Type o oA o B max. min. C C C C C C C C C C C C 27 32 37 42 47 52 57 62 67 72 75 80 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.5 8.0 - - - - - - - - 6.2 6.2 6.2 6.2 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.4 7.9 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.5 oA oA oB Short collet (R) Part number of the collet 1) FFA.2C.727.CN FFA.2C.732.CN FFA.2C.737.CN FFA.2C.742.CN FFA.2C.747.CN FFA.2C.752.CN FFA.2C.757.CN FFA.2C.762.CN FFA.2C.767.CN FFA.2C.772.CN FFA.2C.775.CN FFA.2C.780.CN Reference Collet o Type o oA L L L L L L L L L L L L L 14 27 32 37 42 47 52 57 62 67 72 77 82 1.4 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 Cable o o B max. min. - - - - - - - - - - - - - 1.3 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 0.8 2.2 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 Part number of the collet 1) FFA.2C.714.LN FFA.2C.727.LN FFA.2C.732.LN FFA.2C.737.LN FFA.2C.742.LN FFA.2C.747.LN FFA.2C.752.LN FFA.2C.757.LN FFA.2C.762.LN FFA.2C.767.LN FFA.2C.772.LN FFA.2C.777.LN FFA.2C.782.LN Note: 1) For ordering collets separately. All dimensions are in millimeters. @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Variant Anodized color The variant position of the reference is used to specify the anodized color according to the table below. Part number for connector with standard collet nut: Ref. A J N Anodized color blue yellow black Ref. R T V Anodized color red natural green Part number for connector with bend relief backnut: Ref. L X Anodized color black natural Note: Other anodizing colors are available for connectors with bend relief backnut. Please consult us. Accessories Accessories for the 2C series are identical with the 2G series. Please refer to corresponding pages (page 155). Tooling Please consult the Tooling section (page 183). LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 149 (R) (R) Panel cut-outs Panel cut-outs Model B (mm) ERY 22 mini o 15.1 +0.1 0 ECP EEP ERA FAA HEP HGP PSA B +0.1 0 17 mini 13.6 13.6 13.9 13.9 13.9 13.9 13.9 M13 x 0.75 Note: Mounting nut torque: 6 Nm (1N = 0.102 kg) PCB drilling patterns 310 312 (4x) 1.5 150 314 (4x) 1.5 1 1 2.4 o 0.6 2.4 2.8 o 0.6 (6x) 1 2.4 2.4 1 2.8 1.1 1.1 2.8 o 0.6 2.8 1.1 1.1 o 0.6 1 308 (6x) 1 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) 2G Series The 2G series with key (G) provides the same advantages of space saving due to its small dimensions as the 2C series and is available in multicontact type with 18 contacts. Interconnections Straight plugs Fixed receptacles FGG PHG ECG EGG FGG Free receptacles EYG ECG PHG Model Description ECG Fixed receptacle with two nuts, key (G) (back panel mounting) ECG Fixed receptacle with two nuts, key (G), straight contact for printed circuit (back panel mounting) EGG Fixed receptacle, nut fixing, key (G) EYG Fixed receptacle, key (G), protruding shell (screw fixing on the panel) FGG Straight plug, key (G), cable collet FGG Straight plug, key (G), cable collet and nut for fitting a bend relief PHG Free receptacle, key (G), cable collet PHG Free receptacle, key (G), cable collet and nut for fitting a bend relief Part Section Showing Internal Components Straight plug 5 Fixed receptacle 4 2 3 1 6 5 2 4 1 7 3 1 1 2 3 4 5 outer shell hexagonal nut locking washer insulator female contact 2 3 4 5 6 7 outer shell latch sleeve collet nut split center-piece insulator male contact collet Technical Characteristics Mechanical and Climatic Characterisitcs Endurance Humidity Temperature range Salt spray corrosion test Protection index Climatic category Value Standard > 500 cycles IEC 60512-5 test 9a up to 95% at 140 F -67 F +482 F > 144 h IEC 60512-6 test 11f IP50 IEC 60529 55/175/21 IEC 60068-1 Note: The various tests have been carried out with FGG and EGG connector pairs, with chrome-plated brass shell and PEEK insulator. Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 197. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 151 (R) (R) Part Number Example Straight plug with cable collet FGG 2G 318 C L A D 52 Model: (page 153) Series: 2G Variant: see note 1) Type: (page 154) Collet o: (page 155) Housing: (page 154) Cable fixing type: (page 155) Insulator: L = PEEK Contact: (page 154) FGG.2G.318.CLAD52 = straight plug with cable collet, 2G series, multicontact type with 18 contacts, outer shell in chromeplated brass, PEEK insulator, male solder contacts, D type collet for 5.2 mm diameter cable. Fixed receptacle EGG 2G 318 C L L Model: (page 153) Series: 2G Type: (page 154) Contact: (page 154) Housing: (page 154) Insulator: L = PEEK EGG.2G.318.CLL = fixed receptacle, 2G series, multicontact type with 18 contacts, outer shell in chrome-plated brass, PEEK insulator, female solder contacts. Free receptacle PHG 2G 318 C L L D 72 Model: (page 154) Series: 2G Variant: see note 1) Type: (page 154) Collet o: (page 155) Housing: (page 154) Cable fixing type: (page 155) Insulator: L = PEEK Contact: (page 154) PHG.2G.318.CLLD72 = straight receptacle with cable collet, 2G series, multicontact type with 18 contacts, outer shell in chromeplated brass, PEEK insulator, female solder contacts, D type collet for 7.2 mm diameter cable. Note: 1) The Variant position of the part number is used to specify the presence of a nut for fitting a bend relief, a Z should be indicated and a bend relief can be ordered separately as indicated in the Accessories section. An order for a connector with bend relief should thus include two part numbers. 152 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Models - Series @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (R) ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ FGG.2G Straight plug, key (G), cable collet FGG.2G Straight plug, key (G), cable collet and nut for fitting a bend relief ~30 28.4 ~22 o 14 o 14 20.4 S 12 S 10.5 Note: The bend relief must be ordered separately (see page 175). EGG.2G Fixed receptacle, nut fixing, key (G) ECG.2G Fixed receptacle with two nuts, key (G) (back panel mounting) 15.6 maxi 15.6 maxi 5 maxi M15 x 1 3.5 M15 x 1 o 19.5 o 18 o 19.5 M15 x 1 S 13.8 S 17 S 13.8 o 20 2 S 17 4.2 maxi Panel cut-out (p. 156) Panel cut-out (p. 156) ECG.2G Fixed receptacle with two nuts, key (G), straight contact for printed circuit (back panel mounting) EYG.2G Fixed receptacle, key (G), protruding shell (screw fixing on the panel) 3 12.5 S 13.8 15.6 maxi 8.5 o 14 o 20 M13 x 0.75 3.5 M15 x 1 M15 x 1 o 19.5 S 17 4.2 maxi Panel cut-out (p. 156) Panel cut-out (p. 156) PCB drilling pattern (page 156) Note: All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 153 (R) (R) PHG.2G Free receptacle, key (G), cable collet PHG.2G Free receptacle, key (G), cable collet and nut for fitting a bend relief ~28 o 14 o 14 26.4 S 12 S 10.5 Note: The bend relief must be ordered separately (see page 175). @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Type @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Number of contacts o A (mm) Solder Printed circuit Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) 318 18 0.7 1.4 2.0 5.5 oA Reference Contact type Male solder contacts Note: Female solder contacts 1) See calculation method, caution and suggested standard on 2) Lowest measured value; contact to contact or contact to shell. @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Housings @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ page 204. ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Surface treatment Material Ref. C N K Brass Brass Brass Note Latch sleeve and grounding crown Outer shell and collet nut chrome nickel black chrome nickel nickel nickel @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Ref. A L N 154 @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ First choice alternative Special order alternative Contact Contact type Male solder Female solder Female printed circuit LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ oB Reference Collet o ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ oA @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Collets @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ @@ (R) Cable o Type o oA o B max. min. D D D D 52 62 72 80 5.2 6.2 7.2 8.0 - - 6.2 6.2 5.1 6.1 7.1 7.9 Part number of the collet 1) 4.5 5.5 6.5 7.5 FFA.2C.752.DN FFA.2C.762.DN FFA.2C.772.DN FFA.2C.780.DN Note: 1) For ordering collets separately. All dimensions are in millimeters. Accessories BRE Blanking caps for fixed and free receptacles L B M Part number 18 Dimensions (mm) B L M 12 10.6 6.0 N 85 Note: These caps are suitable for use with any alignment key configuration. The last letter S of the part number stands for the material of the O ring (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. o 3.5 N oA BRE.2G.200.NAS A Body material: Nickel-plated brass (Ni 3 m) Lanyard material: Stainless steel O-ring material: Silicone rubber or FPM Maximum operating temperature: 392 F Watertightness: IP61 according to IEC 60529 BRF Blanking caps for fixed receptacles L B M oA Part number 18 Dimensions (mm) B L M 12 14.0 6.0 N 85 N BRF.2G.200.NAS A sliding loop Note: This caps are suitable for use with any alignment key configuration. The last letter S of the part number stands for the material of the O ring (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. Body material: Nickel-plated brass (Ni 3 m) Lanyard material: Stainless steel O-ring material: Silicone rubber or FPM Maximum operating temperature: 392 F Watertightness: IP61 according to IEC 60529 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 155 (R) (R) FFM Nut for bend relief oA oC L Part number FFM.2C.130.LC S2 Dimensions (mm) A C L S2 14 8 12.2 12 Note: For bend reliefs to be used with this nut see section Accessories page 175. Material: Chrome-plated brass (0.3 m) Note: Other accessories are also available. See section Accessories on page 167. Tooling Please consult the Tooling section (page 183). Panel cut-outs Panel cut-outs PCB drilling pattern EYG 22 mini 60 15 o 15.1 +0.1 0 17 mini 13.9 +0.1 0 o 6.7 30 M13 x 0.75 o 0.6 o 3.5 EGG - ECG Note: Mounting nut torque - 6 Nm (1N = 0.102 kg) 156 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 1D SERIES (quadrax) (R) 158 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) 1D Series 1D series QUADRAX connectors have four concentric contacts insulated from the connector shell, ready to solve any kind of audio-stereo patch panel problems. Specially developed for major radio and television channels, this new connector type provides the possibility of blind mating with the full security of the LEMO Push-Pull self-latching system. They can also be fitted on panel in a star configuration for switching a single signal to different outputs. To enable the user to create his own coding system, bridge plug housings, double panel washers or insulating washers for receptacles as well as cable bend reliefs are available in nine colors. Interconnections Fixed plug Straight plugs FAA FFA Fixed receptacle Free receptacles ERN PCA Bridge plug PCA FFA CFF - CRF Model Description CFF Bridge plug with two non-latching plugs CRF Bridge plug with two non-latching plugs with monitoring output ERN Fixed receptacle nut fixing, with grounding tab FAA Fixed plug, nut fixing, non-latching FFA Straight plug, cable collet FFA Straight plug, cable collet and nut for fitting a bend relief PCA Free receptacle, cable collet PCA Free receptacle, cable collet and nut for fitting a bend relief Part Section Showing Internal Components Straight plug Fixed receptacle outer shell 6 2 7 3 2 grounding crown 3 retaining ring 4 hexagonal nut 5 locking washer 6 insulator 7 printed circuit 8 male contact 9 male intermediate contact 10 female intermediate contact 1 1 4 5 1 10 9 10 8 2 8 9 8 7 6 5 1 4 10 3 2 3 4 5 6 7 8 9 10 outer shell latch sleeve collet nut split center-piece insulator printed circuit female contact male intermediate contact female intermediate contact collet Technical Characteristics Mechanical and Climatic Characteristics Endurance Temperature range1) Salt spray corrosion test Protection index Electrical Value Standard > 1000 cycles IEC 60512-5 test 9a -40 F, +248 F > 144h IEC 60512-6 test 11f IP50 IEC 60529 Note: 1) For bridge plug: -40 F, +176 F Detailed electrical characteristics, as well as materials and treatment are presented in the chapter Technical Characteristics on page 197. Characteristics Insulation resistance Insul. res. after 48h 95%RH at 10 MHz Screening efficiency at 1 GHz Contact resistance Value > 1011 > 1010 > 70 dB > 35 dB < 20m Standard IEC 60512-2 test 3a IEC 60512-2 test 3a IEC 60169-1-3 IEC 60169-1-3 IEC 60512-2 test 2a LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 159 (R) (R) Part Number Example Straight plug with cable collet FFA 1D 694 C N L D 42 Model: (page 161) Series: 1D Variant: see note 1) Type: 694 = quadrax Collet o: (page 163) Housing: C = chromium-plated brass Cable fixing type: D = cable collet Insulator: N = PA6.6 Contact: L = female solder FFA.1D.694.CNLD42 = straight plug with cable collet, 1D series, quadrax type, outer shell in chrome-plated brass, PA6.6 insulator, female solder contacts, D type collet for 4.2 mm diameter cable. Fixed receptacle ERN 1D 694 C N A Model: (page 161) Series: 1D Type: 694 = quadrax Contact: A = male solder Housing: C = chromium-plated brass Insulator: N = PA6.6 ERN.1D.694.CNA = Fixed receptacle, 1D series, quadrax type, outer shell in chrome-plated brass, PA6.6 insulator, male solder contacts. Bridge plug CFF 1D 694 P N M Model: (page 162) Variant: see note 2) Series: 1D Type: 694 = quadrax Contact: M = female-female (CFF) F = female-female-male (CRF) Housing: P = polyamide 6 Insulator: N = PA6.6 CFF.1D.694.PNM = bridge plug with two non-latching plugs, 1D series, quadrax type, outer shell in polyamide 6, PA6.6 insulator, female-female contacts, grey color housing. Note: 1) The variant position of the part number is used to specify the presence of a nut for fitting a bend relief, a Z should be indicated and a bend relief can be ordered separately as indicated in the Accessories section. An order for a connector with bend relief should thus include two references. 2) For bridge plugs the variant position indicates the housing color (see page 163). 160 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Models - Series FFA Straight plug, cable collet Part number FFA.1D.694.CNLD42 FFA.1D.694.CNLD52 FFA.1D.694.CNLD62 FFA.1D.694.CNLD72 FFA.1D.694.CNLD76 ~43 o 12 ~32 S9 S 10 FFA Straight plug, cable collet and nut for fitting a bend relief Part number FFA.1D.694.CNLD42Z FFA.1D.694.CNLD52Z FFA.1D.694.CNLD62Z FFA.1D.694.CNLD72Z 42 o 12 33 S9 Note: The bend relief must be ordered separately (see page 175). S 10 FAA Fixed plug, nut fixing, non-latching 26.5 22.5 S 14 12.5 o 14 M 12 x 1 o 16 Part number FAA.1D.694.CNL Panel cut-out (p. 164) S 10.5 7 maxi ERN Fixed receptacle nut fixing, with grounding tab 21.7 maxi 19.5 S 14 1.5 o 14 M 12 x 1 o 16 Part number ERN.1D.694.CNA Panel cut-out (page 164) 7.5 maxi S 10.5 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 161 (R) (R) CFF Bridge plug with two non-latching plugs CRF Bridge plug with two non-latching plugs with monitoring output Part number 31 CFF.1D.694.PNMG CRF.1D.694.PNFG 22 20 35 15 Note: The last letter (G) of the part number indicates the grey color of the housing. For other colors, replace this letter (G) by the one corresponding to the required color. 42.5 PCA Free receptacle, cable collet Part number o 12.5 ~40 S9 PCA.1D.694.CNAD42 PCA.1D.694.CNAD52 PCA.1D.694.CNAD62 PCA.1D.694.CNAD72 PCA.1D.694.CNAD76 S 10 PCA Free receptacle, cable collet and nut for fitting a bend relief Part number o 12.5 39.5 S9 162 PCA.1D.694.CNAD42Z PCA.1D.694.CNAD52Z PCA.1D.694.CNAD62Z PCA.1D.694.CNAD72Z Note: The bend relief must be ordered separately (see page 175). S 10 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Type @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Note: 1) 2) Number of contacts Solder Test voltage (kV rms)1) 2) Test voltage (kV dc)1) 2) Rated current (A)1) Female solder contacts Reference Contact type Male solder contacts (R) 694 4 0.42 0.6 0.5 See calculation method, caution and suggested standard on page 204. Lowest measured value; contact to contact or contact to shell. @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ oB Reference Collet o Collets @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ oA @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Cable o Type o oA o B max. min. D D D D D 42 52 62 72 76 4.2 5.2 6.2 7.2 7.6 - - - 6.7 6.7 4.0 5.0 6.0 7.0 7.5 3.1 4.1 5.1 6.1 7.1 Part number of the collet 1) FGG.1B.742.DN FGG.1B.752.DN FGG.1B.762.DN FGG.1B.772.DN FGG.1B.776.DN 2) Note: 1) for ordering collets separately. 2) these collets can not be used with connector models using a nut for fitting a bend relief. All dimensions are in millimeters. @@@@@@@@e? @@@@@@@@e? @@@@@@@@e? @@@@@@@@e?@@@@@@@@ @@@@@@@@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@h? @@ @@ @@ @@ @@ @@ @@ @@ @@ @@g @@g @@g @@g @@g @@g @@@@@@@@ @@@@@@@@ Variant @@ @@ @@ @@ @@ @@ @@ @@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ ?@@@@@@@@ Bridge plug colors Ref. A B G J Color blue white grey yellow Ref. M N R V Color brown black red green Note: In standard version the letter G is not mentioned in the variant position and the grey color is chosen by default. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 163 (R) (R) Accessories and Tooling Accessories and tooling for the 1D series are identical with the 1B series. Please refer to corresponding pages (page 167 and 183). Panel cut-out Panel cut-out o 12.1 +0.1 0 20 10.6 +0.1 0 Note: Mounting nut torque: 4.5 Nm (1N = 0.102 kg) When connectors are assembled with double panel washers or insulating washers the mounting nut torque is 4 Nm. 164 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Patch Panels No more jacks - but a modern and reliable connection system which guarantees total security. LEMO offers audio patch panels fitted with Push-Pull connectors; this allows a reliable connection and avoids all risks of linkage interruption by accidentally pulling on the cable. This quality is even reinforced by the use of connectors with gold-plated contacts according to the ISO 4523 standard. Standard 19'' elements with various configurations are offered on panels with 1 or 2 units. Every connector row has a label holder for the identification of the signals. Our patch-panels have satin finish which is highly resistant to abrasion (standard colors black and grey) or a heat treated paint (standard color beige, other colors available on request) or a natural anodized finishing, reflecting the quality of your applications. P 1 U panel, with one row of 30 insulated receptacles of the 0B series (3 contacts) or 20 receptacles of the 1B series (3 or 6 contacts). 1 U panel with two rows of 30 insulated receptacles of the 0B series (3 contacts). 2 U panel with two rows of 20 insulated receptacles of the 1B series (3 or 6 contacts) for Audio stereo applications. Patch panel for AUDIO application "Brought out only" Outputs on rear panel with LEMO 0B-1B series connectors of the corresponding type. Front side connection Rear side connection T R S FGG.0B-1B FGG.0B-1B T R S CFF-CRF-CRG 0B-1B Part Number Example P A G 1B 306 MG 1B 20 =1 Units: A B=2 Total number of connectors Color (see table below) Rear side connection (see table below) Series: 0B - 1B Type (see table below) Ref. C G N T Color beige grey black natural anodized Type Series 303 303 306 0B 1B 1B Type and rear side connection LEMO (Multi. 3 contacts) LEMO (Multi. 3 contacts) LEMO (Multi. 3-6 contacts) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 165 (R) P (R) 1 U panel, with one or two rows of 12, 24 or 30 insulated receptacles of the 0B series (3 contacts) or 20 receptacles of the 1B series (3 or 6 contacts) or 1D (quadrax) for Audio stereo applications. 2 U panel, with two rows of 20 insulated receptacles of the 1B series (3 or 6 contacts) or 1D (quadrax) for Audio stereo applications. Patch panel for AUDIO application "Brought out only" Outputs on rear panel for cable or connector linkage with LEMO 5A series (36 contacts), Sub-D (37 contacts) or ELCO (90 contacts) connectors. Front side connection Rear side connection T R S FGG.5A T R S T R S Sub-D T R S FFA.1D ELCO FGG.0B-1B T R CFF-CRF-CRG 0B-1B-1D S Screened cable T Unscreened cable R S Part Number Example P A C 0B 303 GG 5A 12 Total number of connectors =1 Units: A B=2 Rear side connection (see table below) Color (see table below) Series: 0B - 1B - 1D Type (see table below) Ref. C G N T 166 Color beige grey black natural anodized Type Series 303 303 306 694 GG GG GG RN 0B 1B 1B 1D Type Multicontact (3) Multicontact (3) Multicontact (6) Quadrax Ref. Rear side connection 5A SD EL CA LEMO (36 contacts) Sub-D (37 contacts) ELCO (90 contacts) Cable (see table below) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com TOOLING ACCESSORIES (R) 168 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Accessories FGG-EGG Insulators for crimp contacts male Type female Insulator part number Male contact Female contact 302 303 304 FGG.00.302.YL FGG.00.303.YL FGG.00.304.YL EGG.00.402.YL EGG.00.403.YL EGG.00.404.YL 0B 0K 302 303 304 305 306 307 309 FGG.0B.302.YL FGG.0B.303.YL FGG.0B.304.YL FGG.0B.305.YL FGG.0B.306.YL FGG.0B.307.YL FGG.0B.309.YL EGG.0B.402.YL EGG.0B.403.YL EGG.0B.404.YL EGG.0B.405.YL EGG.0B.406.YL EGG.0B.407.YL EGG.0B.409.YL 1B 1K 302 303 304 305 306 307 308 310 314 316 FGG.1B.302.YL FGG.1B.303.YL FGG.1B.304.YL FGG.1B.305.YL FGG.1B.306.YL FGG.1B.307.YL FGG.1B.308.YL FGG.1B.310.YL FGG.1B.314.YL FGG.1B.316.YL EGG.1B.402.YL EGG.1B.403.YL EGG.1B.404.YL EGG.1B.405.YL EGG.1B.406.YL EGG.1B.407.YL EGG.1B.408.YL EGG.1B.410.YL EGG.1B.414.YL EGG.1B.416.YL 2B 2K 302 303 304 305 306 307 308 310 312 314 316 318 319 326 332 FGG.2B.302.YL FGG.2B.303.YL FGG.2B.304.YL FGG.2B.305.YL FGG.2B.306.YL FGG.2B.307.YL FGG.2B.308.YL FGG.2B.310.YL FGG.2B.312.YL FGG.2B.314.YL FGG.2B.316.YL FGG.2B.318.YL FGG.2B.319.YL FGG.2B.326.YL FGG.2B.332.YL EGG.2B.402.YL EGG.2B.403.YL EGG.2B.404.YL EGG.2B.405.YL EGG.2B.406.YL EGG.2B.407.YL EGG.2B.408.YL EGG.2B.410.YL EGG.2B.412.YL EGG.2B.414.YL EGG.2B.416.YL EGG.2B.418.YL EGG.2B.419.YL EGG.2B.426.YL EGG.2B.432.YL 302 303 304 305 306 307 FGG.3B.302.YL FGG.3B.303.YL FGG.3B.304.YL FGG.3B.305.YL FGG.3B.306.YL FGG.3B.307.YL EGG.3B.402.YL EGG.3B.403.YL EGG.3B.404.YL EGG.3B.405.YL EGG.3B.406.YL EGG.3B.407.YL 00 3B 3K Type Insulator part number Male contact Female contact 3B 3K 308 309 310 312 314 316 318 320 322 324 326 330 FGG.3B.308.YL FGG.3B.309.ML FGG.3B.310.YL FGG.3B.312.YL FGG.3B.314.YL FGG.3B.316.YL FGG.3B.318.YL FGG.3B.320.YL FGG.3B.322.YL FGG.3B.324.YL FGG.3B.326.YL FGG.3B.330.YL EGG.3B.408.YL EGG.3B.409.ML EGG.3B.410.YL EGG.3B.412.YL EGG.3B.414.YL EGG.3B.416.YL EGG.3B.418.YL EGG.3B.420.YL EGG.3B.422.YL EGG.3B.424.YL EGG.3B.426.YL EGG.3B.430.YL 4B 4K 304 306 307 310 312 316 320 324 330 340 FGG.4B.304.ML FGG.4B.306.YL FGG.4B.307.ML FGG.4B.310.YL FGG.4B.312.YL FGG.4B.316.YL FGG.4B.320.ML FGG.4B.324.YL FGG.4B.330.YL FGG.4B.340.YL EGG.4B.404.ML EGG.4B.406.YL EGG.4B.407.ML EGG.4B.410.YL EGG.4B.412.YL EGG.4B.416.YL EGG.4B.420.ML EGG.4B.424.YL EGG.4B.430.YL EGG.4B.440.YL 5B 5K 304 310 314 316 320 330 340 348 350 354 364 FGG.5B.304.ML FGG.5B.310.YL FGG.5B.314.YL FGG.5B.316.YL FGG.5B.320.YL FGG.5B.330.YL FGG.5B.340.YL FGG.5B.348.YL FGG.5B.350.ML FGG.5B.354.YL FGG.5B.364.YL EGG.5B.404.ML EGG.5B.410.YL EGG.5B.414.YL EGG.5B.416.YL EGG.5B.420.YL EGG.5B.430.YL EGG.5B.440.YL EGG.5B.448.YL EGG.5B.450.ML EGG.5B.454.YL EGG.5B.464.YL Note: Each insulator can be used both for crimp contacts of normal shape (fig. 1) or with reduced solder cups (fig. 2) as shown on page 170. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 169 (R) (R) FGG-EGG Crimp contacts oC Types oA oC oA oC Contact part number Types Male Female o C (mm) oA Fig. 2 o A (mm) oC o C (mm) oA o A (mm) Fig. 1 Contact part number Male Female 00 302 303 304 0.5 0.45 FGG.00.554.ZZC EGG.00.654.ZZM 0.5 0.45 FGG.00.554.ZZC EGG.00.654.ZZM 0.5 0.45 FGG.00.554.ZZC EGG.00.654.ZZM 0B 0K 302/303 302/303 304/305 0.9 0.80 FGG.0B.561.ZZC EGG.0B.661.ZZM 0.9 0.45 FGG.0B.562.ZZC EGG.0B.662.ZZM 0.7 0.45 FGG.0B.556.ZZC EGG.0B.656.ZZM 0B 0K 302/303 0.9 1.10 FGG.0B.560.ZZC EGG.0B.660.ZZM 304/305 0.7 0.80 FGG.0B.555.ZZC EGG.0B.655.ZZM 306/307/309 0.5 0.45 FGG.0B.554.ZZC EGG.0B.654.ZZM 0S 302 302 0.9 0.80 FGG.0B.561.ZZC EGG.0B.661.ZZM 0.9 0.45 FGG.0B.562.ZZC EGG.0B.662.ZZM 0S 302 0.9 1.10 FGG.0B.560.ZZC EGG.0B.660.ZZM 1B 1K 302/303 1.3 1.10 FGG.1B.566.ZZC EGG.1B.666.ZZM 304/305 0.9 0.80 FGG.1B.561.ZZC EGG.1B.661.ZZM 306/307/308 0.7 0.45 FGG.1B.556.ZZC EGG.1B.656.ZZM 1B 1K 302/303 304/305 306/307/308 310/314/316 1.3 0.9 0.7 0.5 1S 302 304 1.3 1.10 FGG.1B.566.ZZC EGG.1B.666.ZZM 0.9 0.80 FGG.1B.561.ZZC EGG.1B.661.ZZM 1S 302 304 1.3 1.40 FGG.1B.565.ZZC EGG.1B.665.ZZM 0.9 1.10 FGG.1B.560.ZZC EGG.1B.660.ZZM 2B 2K 2B 2K 302 303 304/305 306/307 308/310 312/314/316 318/319 326/332 2.0 1.6 1.3 1.3 0.9 0.7 0.7 0.5 302 303 304/305 306/307 304/305 306/307 308/310 308/310 312/314/316 318/319 2.0 1.6 1.3 1.3 1.3 1.3 0.9 0.9 0.7 0.7 2S 306 306 1.3 1.10 FGG.2B.566.ZZC EGG.2B.666.ZZM 1.3 0.80 FGG.2B.567.ZZC EGG.2B.667.ZZM 2S 306 1.3 1.40 FGG.2B.565.ZZC EGG.2B.665.ZZM 3B 3K 302 303/304/309 305/306/307 308/309/310 312/314 316/318 320/322/324 326/330 3.0 2.0 1.6 1.3 0.9 0.9 0.7 0.7 2.90 2.40 1.90 1.40 1.10 1.10 0.80 0.80 FGG.3B.580.ZZC FGG.3B.575.ZZC FGG.3B.570.ZZC FGG.3B.565.ZZC FGG.3B.560.ZZC FGG.3B.560.ZZC FGG.3B.555.ZZC FGG.3B.555.ZZC EGG.3B.680.ZZM EGG.3B.675.ZZM EGG.3B.670.ZZM EGG.3B.665.ZZM EGG.3B.660.ZZM EGG.3B.660.ZZM EGG.3B.655.ZZM EGG.3B.655.ZZM 3B 3K 303/304/309 305/306/307 308/309/310 312/314 316/318 320/322/324 326/330 2.0 1.6 1.3 0.9 0.9 0.7 0.7 1.90 1.40 1.10 0.80 0.80 0.45 0.45 FGG.3B.576.ZZC FGG.3B.571.ZZC FGG.3B.566.ZZC FGG.3B.561.ZZC FGG.3B.561.ZZC FGG.3B.556.ZZC FGG.3B.556.ZZC EGG.3B.676.ZZM EGG.3B.671.ZZM EGG.3B.666.ZZM EGG.3B.661.ZZM EGG.3B.661.ZZM EGG.3B.656.ZZM EGG.3B.656.ZZM 4B 4K 304 306/307 310 312 316/320 324/330 340 3.0 2.0 1.6 1.3 0.9 0.9 0.7 2.90 2.40 1.90 1.40 1.10 1.10 0.80 FGG.4B.580.ZZC FGG.4B.575.ZZC FGG.4B.570.ZZC FGG.4B.565.ZZC FGG.4B.560.ZZC FGG.4B.560.ZZC FGG.4B.555.ZZC EGG.4B.680.ZZM EGG.4B.675.ZZM EGG.4B.670.ZZM EGG.4B.665.ZZM EGG.4B.660.ZZM EGG.4B.660.ZZM EGG.4B.655.ZZM 306/307 310 312 316/320 324/330 340 2.0 1.6 1.3 0.9 0.9 0.7 1.90 1.40 1.10 0.80 0.80 0.45 FGG.4B.576.ZZC FGG.4B.571.ZZC FGG.4B.566.ZZC FGG.4B.561.ZZC FGG.4B.561.ZZC FGG.4B.556.ZZC EGG.4B.676.ZZM EGG.4B.671.ZZM EGG.4B.666.ZZM EGG.4B.661.ZZM EGG.4B.661.ZZM EGG.4B.656.ZZM 5B 5K 314/316 320 330/340/348 350/354/364 2.0 1.6 1.3 0.9 1.90 1.40 1.10 0.80 FGG.5B.576.ZZC FGG.5B.571.ZZC FGG.5B.566.ZZC FGG.5B.561.ZZC EGG.5B.676.ZZM EGG.5B.671.ZZM EGG.5B.666.ZZM EGG.5B.661.ZZM 304 310 314/316 320 330/340/348 350/354/364 4.0 3.0 2.0 1.6 1.3 0.9 4.00 2.90 2.40 1.90 1.40 1.10 FGG.5B.582.ZZC FGG.5B.580.ZZC FGG.5B.575.ZZC FGG.5B.570.ZZC FGG.5B.565.ZZC FGG.5B.560.ZZC EGG.5B.682.ZZM EGG.5B.680.ZZM EGG.5B.675.ZZM EGG.5B.670.ZZM EGG.5B.665.ZZM EGG.5B.660.ZZM 4B 4K 5B 5K 170 1.40 1.10 0.80 0.45 2.40 1.90 1.40 1.40 1.10 0.80 0.80 0.45 FGG.1B.565.ZZC FGG.1B.560.ZZC FGG.1B.555.ZZC FGG.1B.554.ZZC FGG.2B.575.ZZC FGG.2B.570.ZZC FGG.2B.565.ZZC FGG.2B.565.ZZC FGG.2B.560.ZZC FGG.2B.555.ZZC FGG.2B.555.ZZC FGG.2B.554.ZZC EGG.1B.665.ZZM EGG.1B.660.ZZM EGG.1B.655.ZZM EGG.1B.654.ZZM EGG.2B.675.ZZM EGG.2B.670.ZZM EGG.2B.665.ZZM EGG.2B.665.ZZM EGG.2B.660.ZZM EGG.2B.655.ZZM EGG.2B.655.ZZM EGG.2B.654.ZZM 1.90 1.40 1.10 1.10 0.80 0.80 0.80 0.45 0.45 0.45 FGG.2B.576.ZZC FGG.2B.571.ZZC FGG.2B.566.ZZC FGG.2B.566.ZZC FGG.2B.567.ZZC FGG.2B.567.ZZC FGG.2B.561.ZZC FGG.2B.562.ZZC FGG.2B.556.ZZC FGG.2B.556.ZZC EGG.2B.676.ZZM EGG.2B.671.ZZM EGG.2B.666.ZZM EGG.2B.666.ZZM EGG.2B.667.ZZM EGG.2B.667.ZZM EGG.2B.661.ZZM EGG.2B.662.ZZM EGG.2B.656.ZZM EGG.2B.656.ZZM LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) BFG Plug caps B oA L Part number Series Dimensions (mm) A B L N BFG.00.100 PCSG BFG.0B.100.PCSG 00 0S-0B 7.5 9.5 10 12 10.0 12.2 60 85 BFG.1B.100.PCSG 1S-1B 12.0 1D 15 13.8 85 BFG.2B.100.PCSG BFG.3B.100.PCSG 2S-2B 15.0 3S-3B 18.5 18 22 15.0 18.5 85 95 N Body material: Polyoxymethylene (POM) grey (or black) Cord material: Polyamide 6, white (or black) Gasket material: Silicone rubber Maximum operating temperature: 212 F Watertightness: IP61 according to IEC 60529 Note: This cap is available only with an alignment key (G). Upon request this cap can be supplied in black and the last letter G of the part number should be replaced with N. Fitting the cord Slide the plug into the loop of the cord. Place the loop into the groove in front of the collet nut and tighten the loop. BFA Plug caps L Part number N oA B sliding loop Body material: Nickel-plated brass (Ni 3m) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass + polyolefin O-ring material: Silicone rubber or FPM Maximum operating temperature: 275 F Watertightness: IP68 according to IEC 60529 for E series BFA.0E.100.NAS BFA.1E.100.NAS BFA.2E.100.NAS BFA.3E.100.NAS BFA.4E.100.NAS BFA.4S.100.NAS BFA.5E.100.NAS BFA.5S.100.NAS BFA.6S.100.NAS Series 0E 1E 2E 3E 4E 4S 5E 5S 6S Dimensions (mm) A B L N 14.0 16.0 19.5 23.0 29.0 25.0 44.0 36.0 46.0 6 6 6 6 10 10 10 10 10 15.0 18.0 20.0 24.0 24.5 22.0 29.0 30.0 33.0 85 85 85 120 120 120 150 150 150 Note: The last letter S of the part number corresponds to the alignment key of the plug. The last letter S of the part number stands for the material of the O-ring (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. BFG Plug caps with key (G) L Part number N oA B sliding loop Body material: Nickel-plated brass (Ni 3m) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass + polyolefin O-ring material: Silicone rubber or FPM Maximum operating temperature: 275 F Watertightness: IP68 according to IEC 60529 for E and K series BFG.0K.100.NAS BFG.1K.100.NAS BFG.2K.100.NAS BFG.3K.100.NAS BFG.4B.100.NAS BFG.4K.100.NAS BFG.5B.100.NAS BFG.5K.100.NAS BFG.6E.100.NAS Series 0K 1K 2K 3K 4B 4K 5B 5K 6E Dimensions (mm) A B L N 14.0 16.0 19.5 23.0 25.0 29.0 36.0 44.0 54.0 6 6 6 6 10 10 10 10 10 15.0 18.0 20.0 24.0 20.0 24.5 27.0 29.0 34.0 85 85 85 120 120 120 150 150 150 Note: This cap is available only with an alignment key (G). The last letter S of the part number corresponds to the alignment key of the plug. The last letter S of the part number stands for the material of the O-ring (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 171 (R) (R) BHG Plug caps, nut fixing or flange B L o 3.5 N oA Part number Body material: Nickel-plated brass (Ni 3m) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass + polyolefin O-ring material: Silicone rubber or FPM Maximum operating temperature: 275 F Watertightness: IP68 according to IEC 60529 for E and K series Series BHG.0K.100.NAS BHG.1K.100.NAS BHG.2K.100.NAS BHG.3K.100.NAS BHG.4B.100.NAS BHG.4K.100.NAS BHG.5B.100.NAS BHG.5K.100.NAS BHG.6E.100.NAS 0K 1K 2K 3K 4B 4K 5B 5K 6E Dimensions (mm) A B L N 14.0 16.0 19.5 23.0 25.0 29.0 36.0 44.0 54.0 6 6 6 6 10 10 10 10 10 15.0 18.0 20.0 24.0 20.0 24.5 27.0 29.0 34.0 85 85 85 120 120 120 150 150 150 Note: This cap is available only with an alignment key (G). The last letter S of the part number corresponds to the alignment key of the plug. The last letter S of the part number stands for the material of the O-ring (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. BFA Plug cap oA L Series Dimensions (mm) A B C H BFA.3K.170.800EN 3K-3E 24 28 10 80 L 27 C H Part number Material: black EPDM oB Note: These caps are suitable for use with any alignment key configura- BRA Blanking caps for fixed receptacles and free straight receptacles L M o 3.5 N Body material: Polyoxymethylene (POM) grey (or black) Cord material: Polyamide 6, white (or black) Gasket material: Silicone rubber Maximum operating temperature: 212 F Watertightness: IP61 according to IEC 60529 B oA Part number Series N BRA.00.200.PCSG BRA.0B.200.PCSG 00 7.5 10.0 8.2 0S-0B 10.0 12.5 11.0 2.7 4.8 60 60 BRA.1B.200.PCSG 1S-1B 14.0 17.0 13.5 1D 5.6 60 BRA.2B.200.PCSG 2S-2B 18.0 21.0 14.5 2C-2G 6.0 60 BRA.3B.200.PCSG 3S-3B 22.0 25.5 17.0 7.0 60 BRE Blanking caps for fixed and free receptacles B Part number Series o 3.5 N oA M Body material: Nickel-plated brass (Ni 3 m) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass + polyolefin O-ring material: Silicone rubber or FPM Maximum operating temperature: 275 F Watertightness: IP61 according to IEC 60529 172 Dimensions (mm) B L M Note: These caps are suitable for use with any alignment key configuration. On request this cap can be supplied in black. If so, replace the last letter G of the part number by N. L A A Dimensions (mm) B L M N BRE.00.200.NAS BRE.0S.200.NAS 00 0S-0B 8 10 9.5 8.8 10.5 10.5 3.5 4.5 60 85 BRE.1S.200.NAS 1S-1B 1D 14 11.0 12.5 5.0 85 BRE.2S.200.NAS BRE.3S.200.NAS BRE.4S.200.NAS BRE.5S.200.NAS BRE.6S.200.NAS BRE.6E.200.NAS 2S-2B 3S-3B 4S-4B 5S-5B 6S 6E 18 22 28 40 54 57 12.0 14.0 20.0 22.0 22.0 24.0 6.0 8.0 10.0 12.0 12.0 14.0 85 120 120 150 150 150 14.0 18.0 23.0 30.0 30.0 31.5 Note: These caps are suitable for use with any alignment key configuration. The last letter S of the part number stands for the O-ring material (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) BRE Blanking caps for fixed and free receptacles L B Part number o 3.5 N oA M BRE.0K.200.NAS BRE.1K.200.NAS BRE.2K.200.NAS BRE.3K.200.NAS BRE.4K.200.NAS BRE.5K.200.NAS Series 0K-0E 1K-1E 2K-2E 3K-3E 4K-4E 5K-5E A 15.0 17.0 20.5 24.0 30.0 44.0 Dimensions (mm) B L M 10 12 14 14 20 22 15.0 20.0 24.0 28.0 30.5 37.0 4 6 8 8 10 12 N 85 85 85 120 120 150 Note: These caps are suitable for use with any alignment key configuration. The last letter S of the part number stands for the O-ring material (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. Body material: Nickel-plated brass (Ni 3 m) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass + polyolefines O-ring material: Silicone rubber or FPM Maximum operating temperature: 275 F Watertightness: IP68 according to IEC 60529 BRA Blanking cap for free receptacles oA L H Part number Series BRA.3K.100.715EN 3K-3E Dimensions (mm) A H L 24 80 25 Material: black EPDM Note: These caps are suitable for use with any alignment key configura- BRD Blanking caps for free receptacles L M oA N Body material: Polyoxymethylene (POM) grey (or black) Cord material: Polyamide 6, white (or black) Gasket material: Silicone rubber Maximum operating temperature: 212 F Watertightness: IP61 according to IEC 60529 B Part number Series A Dimensions (mm) B L M N BRD.00.200.PCSG BRD.0B.200.PCSG 00 7.5 10.0 8.2 0S-0B 10.0 12.5 11.0 2.7 4.8 60 85 BRD.1B.200.PCSG 1S-1B 14.0 17.0 13.5 1D 5.6 85 BRD.2B.200.PCSG BRD.3B.200.PCSG 2S-2B 18.0 21.0 14.5 3S-3B 22.0 25.5 17.0 6.0 7.0 85 95 Note: On request this cap is available in black. If required, replace the last letter G of the part number by N. Fitting the cord Slide the receptacle into the loop of the cord. Place the loop into the groove in front of the collet nut. Tighten the loop. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 173 (R) (R) BRF Blanking caps for free receptacles L Part number B N oA M sliding loop Body material: Nickel-plated brass (Ni 3 m) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass + polyolefin O-ring material: Silicone rubber or FPM Maximum operating temperature: 275 F Watertightness: IP61 according to IEC 60529 Series Dimensions (mm) B L M N BRF.00.200.NAS BRF.0S.200.NAS 00 0S-0B 8 10 9.5 8.8 10.5 10.5 3.5 4.5 85 85 BRF.1S.200.NAS 1S-1B 1D 14 11.0 12.5 5.0 85 BRF.2S.200.NAS BRF.3S.200.NAS BRF.4S.200.NAS BRF.5S.200.NAS BRF.6S.200.NAS 2S-2B 3S-3B 4S-4B 5S-5B 6S 18 22 28 40 54 12.0 14.0 20.0 22.0 22.0 14.0 6.0 85 18.0 8.0 120 23.0 10.0 120 30.0 12.0 150 30.0 12.0 150 Note: These caps are suitable for use with any alignment key configuration. The last letter S of the part number stands for the O-ring material (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. BRF Blanking caps for free receptacles L B Part number Series N oA M BRF.0K.200.NAS BRF.1K.200.NAS BRF.2K.200.NAS BRF.3K.200.NAS BRF.4K.200.NAS BRF.5K.200.NAS 0K-0E 1K-1E 2K-2E 3K-3E 4K-4E 5K-5E A Dimensions (mm) B L M 15.0 17.0 20.5 24.0 30.0 44.0 10 12 14 14 20 22 15.0 20.0 24.0 28.0 30.5 37.0 4 6 8 8 10 12 N 85 85 85 120 120 150 Note: These caps are suitable for use with any alignment key configuration. The last letter S of the part number stands for the O-ring material (silicone rubber). O-rings made from FPM are also available; if required, replace the letter S by V. sliding loop A Body material: Nickel-plated brass (Ni 3 m) Lanyard material: Stainless steel Crimp ferrule material: Nickel-plated brass + polyolefin O-ring material: Silicone rubber or FPM Maximum operating temperature: 275 F Watertightness: IP68 according to IEC 60529 BRD Blanking caps for free receptacles oA L Series H Part number Dimensions (mm) B C H 24 28 10 80 L 25 C BRD.3K.170.800EN 3K-3E A Material: black EPDM oB Note: These caps are suitable for use with any alignment key configuration. BRR Spring loaded dust caps for ERA, ERN and EG receptacles or PSA and PK fixed receptacles Part number N Body material: Polyoxymethylene (POM) grey (or black) Gasket material: Silicone rubber 174 oC B E maxi M A B Dimensions (mm) C E L M N BRR.0S.200.PZSG 0S-0B 11.0 13.3 9.0 5.8 5.0 1.2 15.3 BRR.1S.200.PZSG 1S-1B 14.2 17.1 12.0 6.0 6.3 1.5 20.3 1D BRR.2S.200.PZSG 2S-2B 18.6 22.4 15.2 6.5 8.2 2.0 26.2 2C-2G BRR.3S.200.PZSG BRR.3K.200.PZSG 3S-3B 22.5 26.5 18.2 9.0 8.8 2.5 30.8 3K 29.0 27.5 23.0 9.0 7.7 3.0 29.2 L oA Series Note: On request, this cap is available in black. If so replace the last letter G of the part number by N. Spring material: Stainless steel Maximum operating temperature: 212 F Watertightness: IP61 according to IEC 60529 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) GM Bend relief (Polyurethane) A bend relief made from thermoplastic polyurethane elastomer (Desmopan 786) can be fitted over LEMO plugs and receptacles that are supplied with a specially fitted nut. They are available in nine different colors that match with the GRA insulating washers (see page 178). Use the part numbers shown below to order this accessory separately. oA L Main characteristics Material: Polyurethane elastomer Temperature range in dry atmosphere: Dimensions (mm) Bend relief Cable o A L max. min. Part number -40 F to +176 F Series Part number of nut for fitting the bend relief FFM.00.130.LC1) FFM.00.131.LC 2) GMA.00.012.DG GMA.00.018.DG GMB.00.025.DG GMB.00.028.DG GMB.00.032.DG GMD.00.025.DG GMD.00.028.DG GMD.00.032.DG 1.2 1.8 2.5 2.8 3.2 2.5 2.8 3.2 22 22 22 22 22 22 22 22 1.4 2.1 2.8 3.1 3.5 2.8 3.1 3.5 1.1 1.8 2.5 2.8 3.2 2.5 2.8 3.2 00 GMA.0B.025.DG GMA.0B.030.DG GMA.0B.035.DG GMA.0B.040.DG GMA.0B.045.DG 2.5 3.0 24 24 2.9 3.4 2.5 3.0 0B FFM.0B.130.LC FFM.2B.132.LC 1) 3.5 4.0 4.5 24 24 24 3.9 4.4 5.2 3.5 4.0 4.5 0S FFM.0S.130.LC 0E-0K FFM.0E.130.LC GMA.1B.025.DG GMA.1B.030.DG GMA.1B.035.DG GMA.1B.040.DG GMA.1B.045.DG GMA.1B.054.DG GMA.1B.065.DG 2.5 3.0 3.5 4.0 4.5 5.4 6.5 30 30 30 30 30 30 30 2.9 3.4 3.9 4.4 4.9 6.0 7.0 2.5 3.0 3.5 4.0 4.5 5.4 6.5 1B-1D FFM.1B.130.LC FFM.3B.131.LC 1) GMA.2B.040.DG GMA.2B.045.DG GMA.2B.050.DG GMA.2B.060.DG GMA.2B.070.DG GMA.2B.080.DG 4.0 4.5 5.0 6.0 7.0 7.8 36 36 36 36 36 36 4.5 5.0 5.5 6.5 7.7 8.8 4.0 4.5 5.0 6.0 7.0 7.8 GMA.3B.050.DG GMA.3B.070.DG GMA.3B.080.DG GMA.3B.090.DG 4.5 7.0 8.0 9.0 42 42 42 42 5.2 7.9 8.9 10.0 4.5 7.0 8.0 9.0 GMA.4B.080.DG GMA.4B.010.DG GMA.4B.011.DG GMA.4B.012.DG GMA.4B.013.DG 8.0 10.0 11.0 12.0 13.5 60 60 60 60 60 9.0 10.9 11.9 13.0 14.5 8.0 10.0 11.0 12.0 13.5 Note 1) 2) For single contact connectors For multicontact connectors The GMD are thin bend reliefs (for very flexible cables). 1S FFM.1S.130.LC 1E-1K FFM.1E.130.LC 2B FFM.2B.130.LC FFM.4B.132.LC 1) 2S FFM.2S.130.LC 2E-2K FFM.2E.130.LC 2C-2G FFM.2C.130.LC 3S 3B 3E-3K 4S FFM.3S.130.LC FFM.3B.130.LC FFM.3E.130.LC FFM.4S.130.LC 4S FFM.4S.130.LC 4B FFM.4B.130.LC 4E-4K FFM.4E.130.LC 1) For use only with connectors from series 2B equipped with cable fixing type M and where a bend relief from series 0B is used. 1) For use only with connectors from series 3B equipped with cable fixing type M and where a bend relief from series 1B is used. 1) For use only with connectors from series 4B equipped with cable fixing type M and where a bend relief from series 2B is used. Note: The last letter G of the part number indicates the grey color of the bend relief. For ordering a bend relief with another color, see table on page 176 and replace the letter G by the letter of the required color. See also detailed information for each series: B series on page 62: K series on page 65; S series on page 120; E series on page 123. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 175 (R) (R) GMA Bend relief (Silicone) A bend relief has been designed for connectors used in applications at high temperature or requiring vapor sterilization. These bend reliefs are different from previous ones; their material, a silicone elastomer, is noted for its retention of flexibility over a wide temperature range. They are available in nine colors. L oA Use the part numbers shown below to order this accessory separately. Main characteristics Material: Silicone elastomer VMQ Temperature range in dry atmosphere: -106 F to +392 Temperature range in water steam: +284 F Inflammability: not flammable (no UL classification) Dimensions (mm) Bend relief Cable o A L max. min. Part number F Series Part number of nut for fitting the bend relief GMA.0B.025.RG GMA.0B.030.RG GMA.0B.035.RG GMA.0B.040.RG GMA.0B.045.RG 2.5 3.0 27 27 2.9 3.4 2.5 3.0 0B FFM.0B.130.LC FFM.2B.132.LC 1) 3.5 4.0 4.5 27 27 27 3.9 4.4 5.2 3.5 4.0 4.5 0S FFM.0S.130.LC 0E-0K FFM.0E.130.LC GMA.1B.025.RG GMA.1B.030.RG GMA.1B.035.RG GMA.1B.040.RG GMA.1B.045.RG GMA.1B.051.RG GMA.1B.057.RG GMA.1B.063.RG 2.5 3.0 3.5 4.0 4.5 5.1 5.7 6.3 34 34 34 34 34 34 34 34 2.9 3.4 3.9 4.4 5.0 5.6 6.2 7.0 2.5 3.0 3.5 4.0 4.5 5.1 5.7 6.3 1B-1D FFM.1B.130.LC FFM.3B.131.LC 1) GMA.2B.040.RG GMA.2B.045.RG GMA.2B.051.RG GMA.2B.057.RG GMA.2B.063.RG GMA.2B.071.RG GMA.2B.080.RG 4.0 4.5 5.1 5.7 6.3 7.1 8.0 41 41 41 41 41 41 41 4.4 5.0 5.6 6.2 7.0 7.9 9.0 4.0 4.5 5.1 5.7 6.3 7.1 8.0 1S FFM.1S.130.LC 1E FFM.1E.130.LC 2B FFM.2B.130.LC FFM.4B.132.LC 1) 2S FFM.2S.130.LC 2E-2K FFM.2E.130.LC 2C-2G FFM.2C.130.LC Note 1) For use only with connectors from series 2B equipped with cable fixing type M and where a bend relief from series 0B is used. 1) For use only with connectors from series 3B equipped with cable fixing type M and where a bend relief from series 1B is used. 1) For use only with connectors from series 4B equipped with cable fixing type M and where a bend relief from series 2B is used. Note: The last letter G of the part number indicates the grey color of the bend relief. For ordering a bend relief with another color, see table on page 176 and replace the letter G by the letter of the required color. See also detailed information for each series: B series on page 62: K series on page 65; S series on page 120; E series on page 123. Note: The selection of pigments, which should remain stable at high temperature, is limited by new regulations. For this reason, some colors will be a shade different from those used for Desmopan bend reliefs. The selected solutions represent the best possible compromise. 176 Ref. A B G J M Color blue white grey yellow brown Ref. N R S V Color black red orange green LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) GM Overall protective covering with bend relief for plugs and receptacles Overall protective coverings with bend relief, type GMF for plugs and GMP for receptacles offer optimum protection against mechanical damage and give a protection index of IP65 according to IEC 60529 (mated position). These overall protective coverings with bend relief slide easily over the connector shell and are positioned by slightly pressing the bend relief backnut. The special design of the overall protective covering for plugs provides for easy use of the push-pull self-latching system. GMF Overall protective covering for plug Reference oA L Model Series GMF GMF GMF 0S-0B 1S-1B 2S-2B Dimensions (mm) Overall protective covering Cable o A L 14.7 60.5 16.0 72.0 22.0 95.0 max. min. 3.5 6.2 8.2 1.0 2.5 5.0 Material: Elastomere Operating temperature: -22 F to +248 F GMP Overall protective covering for free receptacle Reference oA L Model Series GMP GMP GMP 0S-0B 1S-1B 2S-2B Dimensions (mm) Overall protective covering Cable o A L max. min. 14.7 69.5 3.5 16.0 79.0 6.2 22.0 102.5 8.2 1.0 2.5 5.0 Material: Elastomere Operating temperature: -22 F to +248 F LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 177 (R) (R) GRA Insulating washers Receptacles or plugs mounted on panels can be fitted with insulating washers. The nine colors available combined with those for the overall protective coverings with bend relief makes color coding possible. Part number Series GRA.00.269.GG GRA.0S.269.GG GRA.1S.269.GG GRA.2S.269.GG GRA.3S.269.GG GRA.4S.269.GG 00 0S-0B 1S-1B 2S-2B 3S-3B 4S-4B Dimensions (mm) E L M S A B 10 12 16 21 25 32 8.8 10.8 13.8 17.8 21.8 28.8 4.5 6.0 6.5 7.3 10.3 10.5 1.8 1.8 1.8 2.2 2.2 2.5 1.0 1.0 1.0 1.2 1.2 1.5 6.4 8.3 10.6 13.6 16.6 23.7 T 8.0 9.9 12.2 16.2 20.2 27.2 Note: Insulating washers for series 5B are available on request. L Caution: These insulating washers can be used with fixed and straight receptacles with across flat dimension S1 equivalent to the S dimension of the washer. oA M S oB Ref. E maxi A B G J M T Ref. Color blue white grey yellow brown N R S V Color black red orange green Note: The last letter G of the part number indicates the color grey for the insulating washer. To obtain an insulating washer of another color, refer to the table above and change the letter G of the part number to the corresponding letter of the color required. Material: Polyamide Maximum operating temperature: 194 F For the panel cut-out, please consult chapter Panel cut-out on page 190. GRC Double panel washers Double panel washers have been designed to make the drilling of panel holes easier for mounting fixed and straight receptacles. The combination of the nine different colors of the double panel washers and of the overall protective coverings with bend relief makes color coding possible. Part number Series B Dimensions (mm) E H L M N R S GRC.0S.260.HG 0S-0B 10.9 5 14 2.5 1.5 26.5 12.5 8.3 GRC.1B.260.HG 1S-1B 13.9 5 20 3.3 1.8 34.5 14.5 10.6 Caution: These double panel washers can be used with fixed or free receptacles with across flat dimension S1 equivalent to the S dimension of the washer. L R M S oB A B G J M Color blue white grey yellow brown Ref. N R S V Color black red orange green Note: The last letter G of the washer's part number indicates the color grey. For other colors, refer to the above table and replace letter G by the one corresponding to the color required. E maxi Material: Polyamide Maximum operating temperature: 194 F 178 H N Ref. For the panel cut-out, please consult chapter Panel cut-out on page 190. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) GBA Locking washers Part number Series oA L oC Material: Nickel-plated bronze (3 m) Dimensions (mm) A C L GBA.00.250.FN GBA.0S.250.FN 00 9.5 0S-0B 12.5 7.1 9.1 1.0 1.0 GBA.1S.250.FN 1S-1B 16.0 12.1 1D 1.0 GBA.1E.250.FN 1E-1K 21.8 16.1 1.2 GBA.2S.250.FN 2S-2B 19.5 15.1 2C-2G 1.2 GBA.3S.250.FN GBA.4S.250.FN 3S-3B 25.0 18.1 4S-4B 32.0 25.1 1.4 1.4 Note: To order this accessory separately, use the above part numbers. GBB Tapered washers oA L oC Dimensions (mm) A C L Part number Series GBB.00.250.LN GBB.0S.250.LN GBB.1S.250.LN 00 0S-0B 1S-1B 9 11 15 7.1 9.1 12.1 2.0 2.5 3.5 GBB.2S.250.LN 2S-2B 2C-2G 18 15.1 4.0 GBB.3S.250.LN GBB.4S.250.LN GBB.5S.250.LN 3S-3B 4S-4B 5S-5B 22 28 40 18.1 25.2 35.2 4.5 5.0 7.5 Note: Receptacles of series 5B and 5S are always supplied with a tapered washer. To order this accessory separately, use the above part numbers. Material: Nickel-plated brass (3 m) GEA Hexagonal nuts A Dimensions (mm) B e L 00 0S-0B 0S-0B 9 11 12 10.3 M7 x 0.50 2.0 12.5 M 9 x 0.60 2.0 13.8 M10 x 0.75 2.5 GEA.0E.240.LN 0E-0K 1S-1B 17 19.5 M14 x 1.00 2.5 GEA.1S.240.LN 1S-1B 1D 14 16.0 M12 x 1.00 2.5 GEA.1E.240.LN 1E-1K 2S-2B 19 21.8 M16 x 1.00 3.0 GEA.2S.240.LN GEA.2E.240.LN GEA.3S.240.LN GEA.3E.240.LN GEA.4S.240.LN GEA.4E.240.LN 2S-2B 2E-2K 3S-3B 3E-3K 4S-4B 4E-4K 17 24 22 30 30 36 19.5 27.5 25.2 34.4 32.0 40.5 Series GEA.00.240.LN GEA.0S.240.LN GEA.0S.241.LN L B e Material: - Nickel-plated brass (3 m) - Natural anodized aluminium alloy - Stainless steel A Part number M15 x 1.00 M20 x 1.00 M18 x 1.00 M24 x 1.00 M25 x 1.00 M30 x 1.00 2.7 4.0 3.0 5.0 5.0 7.0 Note: To order this part separately, use the above part numbers. The last letters LN of the part number refer to the nut material and treatment. If a nut in aluminium alloy or stainless steel is desired, replace the last letters of the part number by PT or AZ respectively. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 179 (R) (R) GEG Notched nut oA L e oB Part number 1 1 1 1 2 1 2 2 2 GEG.00 240.LC GEG.0S.240.LC GEG.0E.240.LC GEG.1S.240.LC GEG.1E.240.LC GEG.1S.242.LC GEG.2S.240.LC GEG.2S.241.LC GEG.2E.240.LC Model 1 oA L oB e Model A 8.7 10.5 15.8 14.0 17.5 12.1 17.5 20.5 22.5 Dimensions (mm) B e L 10 12 18 16 20 14 20 24 25 M7 x 0.5 M9 x 0.6 M14 x 1.0 M12 x 1.0 M16 x 1.0 M11 x 0.5 M15 x 1.0 M19 x 1.0 M20 x 1.0 2.5 2.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 Material: Chrome-plated brass (Ni 3 m + Cr 0.3 m) Note: 00, 0B, 0S, 1B, 1S, 2B and 2S series fixed and free receptacles for back panel mounting are always delivered with this notched nut. To order this accessory separately, use the above part numbers. Model 2 GEC Conical nuts Part number A L oB e S1 Material: Chrome-plated brass (Ni 3 m + Cr 0.3 m) Note: 3B, 3K, 3S, 3E, 4B, 4K, 4S, 4E, 5B, 5K, 5S, 5E, 6S and 6E series fixed and free receptacles for back panel mounting are always delivered with a conical nut. To order this accessory separately, use the part numbers in the adjacent table. GEC.00 240.LC GEC.0S.240.LC GEC.0E.240.LC GEC.1S.240.LC GEC.1S.241.LC GEC.1S.242.LC GEC.2S.240.LC GEC.2S.241.LC GEC.2E.240.LC GEC.3S.240.LC GEC.3E.240.LC GEC.4S.240.LC GEC.4K.241.LC GEC.5S.240.LC A 8 10 16 13 17 12 17 20 22 20 27 27 32 37 Dimensions (mm) B e L 10.0 12.0 18.0 16.0 20.0 14.0 20.0 24.0 25.0 24.0 30.0 30.0 35.5 41.0 M7 x 0.5 M9 x 0.6 M14 x 1.0 M12 x 1.0 M16 x 1.0 M11 x 0.5 M15 x 1.0 M19 x 1.0 M20 x 1.0 M18 x 1.0 M24 x 1.0 M25 x 1.0 M30 x 1.0 M35 x 1.0 2.5 2.5 3.0 3.2 4.0 3.2 3.8 5.8 5.0 4.5 4.5 4.5 5.0 5.0 GEB Round nuts oA e L Part number Model 1 oA e L Model 2 GEB.00.240.LN GEB.0S.240.LN GEB.0E.240.LN GEB.1S.240.LN GEB.1E.240.LN GEB.2S.240.LN GEB.2B.240.LN GEB.3S.240.LN GEB.4S.240.LN GEB.5S.240.LN GEB.5E.240.LN GEB.6S.241.LN GEB.6E.240.LN Model 1 1 1 1 1 1 2 1 1 2 2 2 2 Dimensions (mm) A e L 9.0 11.0 18.0 14.0 20.0 18.0 17.5 22.0 28.0 40.0 54.0 54.0 65.0 M7 x 0.50 M9 x 0.60 M14 x 1.00 M12 x 1.00 M16 x 1.00 M15 x 1.00 M15 x 0.75 M18 x 1.00 M25 x 1.00 M35 x 1.00 M45 x 1.50 M48 x 1.50 M55 x 2.00 4.0 4.0 5.0 5.0 5.0 5.5 2.5 5.5 6.0 8.0 8.0 8.0 9.0 Material: Nickel-plated brass (3 m) Note: 5B, 5K, 5S, 5E, 6S and 6E series receptacles and plugs are always supplied with model 2 round nuts. To order this accessory separately, use the part numbers in the adjacent table. 180 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com S1 8 10 16 13 17 12 17 20 20 20 24 27 36 37 (R) (R) GCA Grounding lug oA L N oB Material: CuSnZn plated brass (2 m) Part number Series GCA.00.255.LT GCA.0S.255.LT GCA.0E.255.LT GCA.1S.255.LT GCA.1E.255.LT GCA.2S.255.LT GCA.2E.255.LT GCA.3S.255.LT GCA.4S.255.LT GCA.4E.255.LT GCA.5S.255.LT 00 0S-0B 0E-0K 1S-1B 1E-1K 2S-2B 2E-2K 3S-3B 4S-4B 4E-4K 5S-5B Dimensions (mm) A B L N 9.5 13.0 17 17 20 20 25 25 35 35 42 7.1 9.1 14.1 12.2 16.2 15.2 20.2 18.2 25.6 30.6 35.1 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.7 18.2 22.0 27.5 27.5 32.0 32.0 39.0 39.0 50.0 50.0 57.5 GSC Lead-through with cable collet 5 4 2 1 3 Part number GSC.1S.290.ND42 GSC.1S.290.ND52 GSC.1S.290.ND62 GSC.1S.290.ND72 GSC.1S.290.ND76 7.5 3.1 4.1 5.1 6.1 7.1 o 12 M9 x 0.6 o 12.5 4.0 5.0 6.0 7.0 7.5 Note: The cable collet system stands for both screened and unscreened cables. It can be delivered with a nut for fitting a bend relief it you add a Z at the end of the part number. ~26 S 11 Cable o (mm) max. min. 5 maxi S 11 S9 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 181 (R) 182 (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Tooling DCG Wrench for hexagonal nuts N L Part number oB DCG.91.149.0TN DCG.91.161.1TN DCG.91.201.4TN DCG.91.231.7TN DCG.91.282.2TN Dimensions (mm) B L N 14 16 20 23 28 40 45 52 62 76 50 52 65 68 73 Part number of the nut GEA.00.240.LN GEA.0S.240.LN GEA.1S.240.LN GEA.2S.240.LN GEA.3S.240.LN Material: blackened steel DCA Wrench for hexagonal nuts, with alignment of the receptacles by the flats N L maxi Part number DCA.91.149.0TN DCA.91.161.1TN DCA.91.201.4TN DCA.91.231.7TN DCA.91.282.2TN Dimensions (mm) B L N 14 16 20 23 28 65 73 85 100 120 50 52 65 68 73 Part number of the nut GEA.00.240.LN GEA.0S.240.LN GEA.1S.240.LN GEA.2S.240.LN GEA.3S.240.LN Material: blackened steel oB DCB Spanner type wrench for model 1 round nuts N L Part number oB DCB.91.119.0TN DCB.91.131.1TN DCB.91.161.4TN DCB.91.201.8TN DCB.91.242.2TN Dimensions (mm) B L N 11 13 16 20 24 40 45 52 62 76 50 50 65 65 70 Part number of the nut GEB.00.240.LN GEB.0S.240.LN GEB.1S.240.LN GEB.2S.240.LN GEB.3S.240.LN Material: blackened steel oA DCH Wrench for conical nut oB Part number L DCH.91.101.PN DCH.91.121.PN DCH.91.161.PN DCH.91.201.PN Dimensions (mm) A B L N 10.1 12.1 16.1 20.1 12.8 14.8 21.0 22.8 124 124 124 129 48.3 49.3 51.9 53.5 Part number of the nut GEC.00.240.LC GEC.0S.240.LC GEC.1S.240.LC GEC.2S.240.LC Material: Dark grey polyurethane N LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 183 (R) (R) DCP Flat wrench for collet nut M N S1 Part number L DCP.99.045.TC DCP.99.050.TC DCP.99.055.TC DCP.99.060.TC Dimensions (mm) L M N S1 70 78 78 78 2 2 2 2 10.5 12.6 12.6 12.6 4.5 5.0 5.5 6.0 Material: chrome-plated steel S1 DCH Wrench for notched nuts oA oB Part number L DCH.91.101.PA DCH.91.121.PA DCH.91.181.PA DCH.91.161.PA DCH.91.201.PA DCH.91.141.PA DCH.91.201.PA DCH.91.241.PA DCH.91.251.PA N Dimensions (mm) A B L N 10.1 12.1 18.1 16.1 20.1 14.1 20.1 24.1 25.1 12.8 14.8 22.8 21.0 22.8 18.6 22.8 30.8 32.8 124 124 129 124 129 124 129 134 134 Part number of the nut 48.3 49.3 53.1 51.2 53.5 51.2 53.5 52.6 55.5 GEG.00.240.LC GEG.0S.240.LC GEG.0E.240.LC GEG.1S.240.LC GEG.1E.240.LC GEG.1S.242.LC GEG.2S.240.LC GEG.2S.241.LC GEG.2E.240.LC Material: Blue polyurethane DCP Wrench for tightening backnut N S1 S2 Part number M DCP.91.001.TN L DCP.91.023.TN DCP.91.045.TN Series 0B 1B 2B-2K 3B-3K 4B 5B L 95 95 115 115 130 130 Dimensions (mm) M N S1 2.5 2.5 3.0 3.0 3.5 3.5 21 25 30 35 40 45 8.1 10.1 13.1 15.1 21.2 31.2 S2 7.1 9.1 12.1 14.1 20.2 30.2 Material: blackened steel DCL Wrench whish secures straight plug with two latching tabs while tightening collet nut oB N L Part number DCL.91.105.0TK DCL.91.127.0TK DCL.91.149.0TK Series 00 0S 1S Dimensions (mm) B L N 10 12 14 45 47 52 13.5 17.0 19.0 Material: blackened steel 184 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) oB N DCN Wrench which secures straight plug with three latching tabs while tightening collet nut Part number DCN.91.905.0TK DCN.91.125.0TK DCN.91.149.0TK DCN.91.171.2TK DCN.91.201.5TK L (R) Series 00 0S 1S 2S-2C 3S Dimensions (mm) B L N 9 12 14 17 20 45 47 52 63 73 12 17 19 20 22 Material: blackened steel DCL Assembly tool for FVB.00.303.NLA plugs Part number 00 Dim. (mm) A L 5 165 oA DCL.91.516.5TK Series L DPF Pliers for assembling plugs (series K and E) Part number oA DPF.91.001.TA DPF.91.023.TA Series 0E-0K 1E-1K 2E-2K 3E-3K Dimensions (mm) A B 10 - 15 - - 12 - 18 oB 220 Example for use The plug end must be held in the pliers while the nut is tightened with the wrench. Wrench DCP Pliers DPF DTA Taps Part number DTA.99.700.5Z DTA.99.900.6Z Series 00 0S-0B Thread M7 x 0.5 M9 x 0.6 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 185 (R) (R) Crimping tools for electrical contacts Manual crimping tools Fig. 1 Part number Supplier contact o 0.5-0.7 0.9-1.3 (Fig. 1) DPC.91.701.V1) MH8601) 23-000 6163361) LEMO DANIELS BALMAR BUCHANAN Fig. 2 1) 2) contact o 1.6-2.0 (Fig. 2) DPC.91.101.A2) AF82) 55-000 6157082) contact o 3.0-4.0 (Fig. 2) DPC.91.102.V M300BT 55-000 615708 According to specification MIL-C-22520/7-01. According to specification MIL-C-22520/1-01. Pneumatic crimping tools Supplier Part number LEMO BALMAR BUCHANAN DPC.91.701.C 85230 621101 According to specification MIL-C-22520/7-01. For LEMO contacts o 0.5-0.7-0.9-1.3 mm DCE Positioners for crimp contacts o 0.5-0.7-0.9 and 1.3 mm 00 male female These positioners are suitable for use with both manual and pneumatic crimping tools according to the MIL-C-22520/7-01 standard. Fig. 1 oA oA Fig. 2 oA oA oC oC 1B 1K 1S oC oC Note: A wide variation of strand number and diameter combinations are quoted as being AWG, some of which do not have a large enough cross section to guarantee a crimp as per either MIL-C-22520/1-01 or /7-01. Our technical department is at your disposal to study and propose a solution to all your applications. Note: See table on page 60 for connector selection and the table on page 170 for contact selection. 186 0B 0K 0S 2B 2K 2S 302 303 304 For male contact 0.5 0.45 1 28-30-32 DCE.91.050.0VC DCE.91.050.0VM DCE.91.090.BVC DCE.91.090.BVM DCE.91.090.AVC DCE.91.090.AVM DCE.91.070.BVC DCE.91.070.BVM DCE.91.050.BVC DCE.91.050.BVM DCE.91.131.BVC DCE.91.131.BVM DCE.91.091.BVC DCE.91.091.BVM DCE.91.071.BVC DCE.91.071.BVM DCE.91.051.BVC DCE.91.051.BVM DCE.91.132.BVC DCE.91.132.BVM 0.9 0.9 0.9 0.7 304/305 0.7 oC Conductor AWG oA Type 1 2 2 1 2 20-22-24 22-24-26 28-30-32 22-24-26 28-30-32 306/307 0.5 0.45 1 309 28-30-32 1.3 1.3 0.9 3041) 305 0.9 306/307 0.7 308 0.7 1 2 1 2 1 2 18-20 20-22-24 20-22-24 22-24-26 22-24-26 28-30-32 310/314 0.5 0.45 1 316 28-30-32 304/305 1.3 1.40 1 1.3 1.10 2 3061) 307 1.3 0.80 2 0.9 1.10 1 308/310 0.9 0.80 2 0.9 0.45 2 18-20 20-22-24 22-24-26 20-22-24 22-24-26 28-30-32 312/314 0.7 0.80 1 316/318 0.7 0.45 2 319 22-24-26 326/332 0.5 0.45 1 28-30-32 3021) 303 3021) 303 Positioners part number Fig. Connector + Contact 1.10 0.80 0.45 0.80 0.45 1.40 1.10 1.10 0.80 0.80 0.45 For female contact DCE.91.132.CVC DCE.91.132.CVM DCE.91.092.BVC DCE.91.092.BVM DCE.91.092.AVC DCE.91.092.AVM DCE.91.072.BVC DCE.91.072.BVM DCE.91.052.BVC DCE.91.052.BVM 28-30-32 Note: 1) Only these types are available in S series. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) DCE Positioners for crimp contacts 0.5-0.7-0.9 and 1.3 mm diameter 1 2 1 2 18-20 20-22-24 20-22-24 22-24-26 320/322 0.7 0.80 1 324/326 328/330 0.7 0.45 2 22-24-26 1.3 1.3 316/320 0.9 324/330 0.9 0.7 340 0.7 Type male female 3B 3K These positioners are suitable for use with both manual and pneumatic crimping tools according to the MIL-C-22520/7-01 standard. 4B 4K 5B 5K oC Conductor AWG oA Fig. Connector + Contact 308/309 1.3 1.40 310 1.3 1.10 312/314 0.9 1.10 316/318 0.9 0.80 For female contact DCE.91.133.BVC DCE.91.133.BVM DCE.91.093.BVC DCE.91.093.BVM DCE.91.073.BVC DCE.91.073.BVM DCE.91.134.BVC DCE.91.134.BVM DCE.91.094.BVC DCE.91.094.BVM DCE.91.074.BVC DCE.91.074.BVM DCE.91.135.BVC DCE.91.135.BVM DCE.91.095.BVC DCE.91.095.BVM 28-30-32 1.40 1.10 1.10 0.80 0.80 0.45 1 2 1 2 1 2 18-20 20-22-24 20-22-24 22-24-26 22-24-26 28-30-32 330/340 1.3 1.40 348 1.3 1.10 350/354 0.9 1.10 364 0.9 0.80 1 2 1 2 18-20 20-22-24 20-22-24 22-24-26 312 Positioners part number For male contact DCE Turret for crimp contacts 1.6-2.0-3.0 and 4.0 mm diameter oC Fig. Conductor AWG 2.0 2.0 1.6 1.6 2.4 1.9 1.9 1.4 1 2 1 2 12-14-16 14-16-18 14-16-18 18-20 3.0 303/304 2.0 309 2.0 305/306 1.6 307 1.6 2.9 2.4 1.9 1.9 1.4 1 1 2 1 2 10-12-14 12-14-16 14-16-18 14-16-18 18-20 DCE.91.303.BVCM 304 3.0 2.0 306/307 2.0 1.6 310 1.6 2.9 2.4 1.9 1.9 1.4 1 1 2 1 2 10-12-14 12-14-16 14-16-18 14-16-18 18-20 DCE.91.304.BVCM 304 310 4.0 2.9 2.4 1.9 1.9 1.4 1 1 1 2 1 2 8-10-12 10-12-14 12-14-16 14-16-18 14-16-18 18-20 DCE.91.405.BVCM DCE.91.305.BVCM Type Note: These turrets can be used with manual crimping tool according to MIL-C-22520/1-01 standard. 2B 2K 302 3B 3K 302 4B 4K 5B 5K Positioners oA Connector + Contact 303 4.0 3.0 2.0 314/316 2.0 1.6 320 1.6 Part number DCE.91.202.BVCM DCE.91.162.BVCM DCE.91.203.BVCM DCE.91.163.BVCM DCE.91.204.BVCM DCE.91.164.BVCM DCE.91.205.BVCM DCE.91.165.BVCM LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 187 (R) (R) DCF Extraction tools for crimp contacts Connector Extractors Contact oA Type Part number 00 302/303/304 0.5 DCF.91.050.2LT 0B 0K 302/303 304/305 306/307/309 0.9 0.7 0.5 DCF.91.090.2LT DCF.91.070.2LT DCF.91.050.2LT 1B 1K 302/303 304/305 306/307/308 310/314/316 1.3 0.9 0.7 0.5 DCF.91.131.2LT DCF.91.090.2LT DCF.91.070.2LT DCF.91.050.2LT 2B 2K 302 303 304/305/306/307 308/310 312/314/316/318/319 326/332 2.0 1.6 1.3 0.9 0.7 0.5 DCF.91.202.2LT DCF.91.162.2LT DCF.91.131.2LT DCF.91.090.2LT DCF.91.070.2LT DCF.91.050.2LT 3B 3K 302 303/304/309 305/306/307 308/309/310 312/314/316/318 320/322/324/326/330 3.0 2.0 1.6 1.3 0.9 0.7 DCF.91.303.5LT DCF.91.203.5LT DCF.91.163.5LT DCF.91.133.5LT DCF.91.093.5LT DCF.91.073.5LT 4B 4K 304 306/307 310 312 316/320/324/330 340 3.0 2.0 1.6 1.3 0.9 0.7 DCF.91.303.5LT DCF.91.203.5LT DCF.91.163.5LT DCF.91.133.5LT DCF.91.093.5LT DCF.91.073.5LT 5B 5K 304 310 314/316 320 330/340/348 350/354/364 4.0 3.0 2.0 1.6 1.3 0.9 DCF.91.405.5LT DCF.91.303.5LT DCF.91.203.5LT DCF.91.163.5LT DCF.91.133.5LT DCF.91.093.5LT Note: This model is used for male and female contacts. DCK Retention testing tools for crimp contacts 0.5-0.7-0.9 and 1.3 mm diameter F 188 Contact oA Test force (N) 0.5 0.7 0.9 1.3 8 14 14 25 Testing tool part number For male contact DCK.91.050.8LRC DCK.91.071.4LRC DCK.91.091.4LRC DCK.91.132.5LRC For female contact DCK.91.050.8LRM DCK.91.071.4LRM DCK.91.091.4LRM DCK.91.132.5LRM LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Panel Cut-outs P2-P5-P10-P11 L mini P6-P7 P8 B + 0.1 0 oC 120 x 3 B + 0.1 0 oA o A+ 0.1 0 L mini H P1-P3-P4-P9 o A + 0.1 0 B + 0.1 0 o A + 0.1 0 B series oA P1 B 7.1 9.1 12.1 15.1 18.2 25.2 35.21) 6.4 8.3 10.6 13.6 16.6 23.6 33.6 Series 00 0B 1B 2B 3B 4B 5B L P2 oA L oA P3 B 11.5 7.1 11.5 - - 13.5 9.1 13.5 14.1 12.6 19.0 - - 16.1 14.6 21.5 - - 19.2 17.1 27.0 - - - - 34.0 - - - - 44.0 - - - - L oA P4 B - 20 22 28 - - - - 10.1 14.1 16.1 20.2 25.2 35.2 - 9.1 12.6 15.1 18.6 23.6 33.6 P5 o A2) L L oA P6 B - - - - - 15.0 8.30 10.5 - - 21.0 11.17 14.0 - - 23.0 13.95 18.0 - - 29.5 - - - - 36.1 - - - - 47.1 - - 3.3 35.2 P8 B H oA - - - - - - 34 - - - - - - - - - - - - 2.8 35.2 C oA P9 B L P10 oA L - - - - - - 47 7.1 9.1 12.1 15.1 18.2 25.2 35.2 - 8.3 10.6 13.6 16.6 23.6 33.6 12 15 19 23 27 36 47 - - 11.1 - - - - - - 17 - - - - Note: 1) For using the tapered washer a round hole o 36 mm apply. 2) tolerance: + 0.02 0 Cut-out types Model Mounting nut torque Type EBG ECG EEG EGG EFG EHG EJG Model P6 P1 P1 P1 P2 P1 P5 EKG EMG ENG ENY ESG EXG EYG Type P1 P1 P1 P1 P1/P2 P2/P10 P1/P10 Model Type FAG FBG FWG HCG HEG HGG HHG Model HMG HNG PEG PFG PKG R S P1 P8 P9 P3 P9 P9 P9 Type P9 P9 P1 P1 P1 P4 P4/P93) Note: 3) In series 1B use P9. Model XBG XPF XRB YHG Type Series P2 P2 P2 P9 00 0B 1B 2B 3B 4B 5B Torque (Nm) Metal shell Plastic shell4) 1.0 2.5 4.5 6.0 9.0 12.0 17.0 0.4 0.4 0.7 0.8 1.0 5.0 - Note: 4) These values apply when metal shell are mounted with insulating washer. S series Series 00 0S 1S 2S 3S 4S 5S 6S Note: 1) For oA P1 B L 7.1 9.1 12.1 15.1 18.2 25.2 35.21) 48.3 6.4 8.3 10.6 13.6 16.6 23.6 33.6 45.6 11.5 13.5 19.0 21.5 27.0 34.0 44.0 58.0 P2 oA L oA P3 B L oA P4 B L P5 o A2) L 7.1 9.1 12.1 15.1 18.2 25.2 35.2 48.3 - 12.1 14.1 16.2 20.2 25.2 35.2 48.3 - 10.6 12.6 14.6 18.6 23.6 33.6 45.6 - 19.0 21.0 22.0 30.0 36.0 47.0 60.0 - 10.1 12.1 16.1 20.2 25.2 35.2 48.3 - 9.1 10.6 15.1 18.6 23.6 33.6 45.6 - 15 18 23 29 36 47 60 - - - - - - - - - - 11.92 17.0 3.3 12.1 12.7 - - 3.3 15.1 15.5 - - 3.3 18.2 18.0 - - - - - - - 4.4 35.2 36.8 - - - - - 11.5 13.5 19.0 21.5 27.0 34.0 44.0 58.0 oA P6 B oA P7 B H P10 oA L - - - - - - - - 2.7 11.1 12.4 11.1 - - - - - - - - - - - - - - - - - - - - P11 oA L - - - - 9.1 16 17 12.1 19 - - - - - - - - - - - - - - - + 0.02 using the tapered washer a round hole o 36 mm apply. 2) tolerance: 0 Cut-out types Model EBC EBD EBS ECP EEP EHP H Type P6 P6 P7 P1 P1 P2/P1 Mounting nut torque Model EMD ERA ERC ERD ERM ERN Type P1 P1 P1 P1 P1 P1 Model ERS ERT ERY ERZ EXP EWB Type P2 P5 P1 P1 P2/P10 P3 Note: 3) In series 6S use P2. 4) Use only o A in 1S series. 5) In series 4S and 5S use P2. Model FAA HCP HGP HGW PSA PSP Type P1/P23) P34) P3 P11 P1 P1 Model PSS RAD SWH Type Series P1 P1/P25) P4 0S 1S 2S 3S 4S 5S 6S 1 N = 0.102 kg Torque (Nm) Metal shell Plastic shell6) 2.5 4.5 6.0 9.0 12.0 17.0 22.0 0.4 0.7 0.8 1.0 5.0 - - Note: 6) These values apply when metal shell are mounted with insulating washer. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 189 (R) (R) K series Series 0K 1K 2K 3K 4K 5K oA P1 B L oA 14.1 16.1 20.2 24.2 30.2 45.2 12.6 14.6 18.6 22.6 28.6 42.6 20.5 22.5 29.0 35.5 43.0 57.0 - - - 3.5 3.5 4.5 P6 B H oA - - - - - - 22.6 20.6 28.6 27.0 42.6 38.0 - - - 3.5 3.5 4.5 P7 B H - - - - - - 23.1 23.0 30.1 29.0 45.1 44.0 Cut-out types Model Type EBG EDG EEG EGG EHG EMG Note: Mounting nut torque Model P7 P72) P1 P1 P1 P1 2) ENG EVG FAG FXG HEG HGG Type Model P1 P1 P1 P6 P1 P1 PBG PEG PKG S For this model dimension B = 18.1. 3) Type Series Torque (Nm) 0K 1K 2K 3K 4K 5K 5 7 9 12 17 22 P73) P1 P1 P1 1 N = 0.102 kg For this model dimension B = 19.1. E series Series 0E 1E 2E 3E 4E 5E 6E oA P1 B L oA P6 14.1 16.1 20.2 24.2 30.2 45.2 55.3 12.6 14.6 18.6 22.6 28.6 42.6 52.1 20.5 22.5 29.0 35.5 43.0 57.0 68.0 - - 2.9 - - - - B H - - - - 19.1 11.8x20.4 - - - - - - - - Cut-out types Model EBR EEP EHP ERA Type Mounting nut torque Model P6 P1 P1 P1 ERB ERC FAA HGP Type P1 P1 P1 P1 Model PSA PSP SWH Type Series Torque (Nm) P1 P1 P1 0E 1E 2E 3E 4E 5E 6E 5 7 9 12 17 22 27 1 N = 0.102 kg Panel cut-out for mounting with insulating washer or double panel washer (B-S series) H oA Series L mini 190 0S-0B 1S-1B Dimensions (mm) oA H L 11 14 14 20 13.5 17.0 Note: For nut tightening torques please refer to the corresponding series in the table on page 189. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) PCB drilling pattern Fixed receptacle with straight printed circuit contact (B-K series) Dimensions A B 1.2 2.2 2.8 4.4 A Dimensions B C 0.6 0.6 0.8 0.8 0.8 1.6 2.5 3.1 5.0 6.2 45 45 45 45 45 A Dimensions B C 0.6 0.8 3.0 3.7 60 60 A Dimensions B C 0.6 0.8 0.8 3.0 3.7 5.8 60 60 60 A Dimensions B C oB 306 oB oA Series C 0B-0K 1B-1K 307 0B-0K 1B-1K 2B-2K oB C oA Series 308 Series oA C 0.8 0.8 oB 2B-2K 3B-3K 6.4 7.5 C 0.6 0.8 0.8 0.8 0.8 1.35 2.30 3.00 4.60 5.60 120 120 120 120 120 A Dimensions B C 0.6 0.8 0.8 2.8 3.4 5.2 72 72 72 A Dimensions B C 0.8 5.6 72 A Dimensions B C 0.8 3.8 5126' A Dimensions B C 0.8 7.5 45 oA Series C 0B-0K 1B-1K 2B-2K oB 00 0B-0K 1B-1K 2B-2K 3B-3K 305 306 Series oB oA C Dimensions B 2B-2K C 308 Series C 1B-1K oB Series oB 309 Series C 45 45 3B-3K oB 304 0.6 0.8 0.8 0.8 00 0B-0K 1B-1K 2B-2K 3B-3K oA oB 00 0B-0K 1B-1K 2B-2K A Series oA oA 303 oA Series C 302 P15 oA oB H C 1B-1K 2B-2K 3B-3K Dimensions B C D A 0.6 0.8 0.8 312 H C 3.95 45 2230' 1.40 6.20 45 2230' 2.15 7.90 45 2230' 2.80 Series D 2B-2K 3B-3K Dimensions B C D A H 0.8 6.50 45 2230' 2.80 0.8 8.20 45 2230' 3.40 oB Series D oH 310 oA oA C 6 oB 36 H 3 1B-1K 2B-2K 3B-3K A Dimensions B C H 0.6 0.8 0.8 4.4 6.5 8.2 316 I Series 72 90 1.90 1.80 90 2.65 2.65 90 3.40 3.40 D E oB Series oH 314 oA 1B-1K 2B-2K 3B-3K 4B-4K A Dimensions B D E 0.6 4.4 0.8 6.6 0.8 8.4 0.6 10.5 H 3244' 1622' 2.00 3244' 1622' 3.10 3244' 1622' 3.86 3244' 1622' 5.00 I oA Series E 2B-2K 3B-3K B Dimensions C D E 319 H 0.8 6.7 60 30 15 3.50 0.8 8.4 60 30 15 4.34 Series C E oA 2B-2K D oH oH D A oB C A B Dimensions C D E H 0.8 6.7 60 30 15 3.5 oB 318 oA Note: All views are from the side of the receptacle. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 191 (R) oH A oA oB 3B-3K 4B-4K B Dimensions C D 322 Series C H E 0.6 8.62 5126' 2742' 4.78 0.6 11.00 5126' 2742' 6.00 C A 3B-3K B Dimensions C D E oA 2B-2K.326 3B-3K.326 0 o 2.1 o9 o7 4B-4K.340 o 0.6 2.6 5B-5K.354 o 0.6 ' o 19.2 o 13.73 o 3.1 1540 7.2 o 8.36 12 0 ' 2 274 18 o 7.94 7.0 o9 o 3.1 36 2 o 0.6 o 5.7 o 2.2 36 51 5B-5K.350 6' o 11.64 2230' 90 o 11.4 2230' o 0.6 12 0 40 4B-4K.330 7.4 3B-3K.330 o 0.6 o 0.6 o 4.24 oA oE 90 2543' 2543' 0.6 8.8 45 2543' 1.8 5.30 0.6 11.1 45 2543' 2.2 6.65 o 5.6 H 40 Dimensions C D E oB oH D 3B-3K 4B-4K B o 4.2 A o 1.6 Series C 12 324 24 40 5B-5K.364 11 o 19.4 60 2741'32'' 7' Length of straight printed circuit contacts (for receptacle E) Type Dimensions oC L 00 302 303 304 0.5 0.5 0.5 3.0 3.0 3.0 0B 0K 302/303 304/305 306/307 0.7 0.5 0.5 3.0 3.0 3.0 1B 1K 302/303/304/305 306/307/308 310/314/316 0.7 0.7 0.5 3.0 3.0 3.0 2B 2K 302 303/304/305/306/307/308/310 312/314/316/318/319 326 0.7 0.7 0.7 0.5 3.0 5.0 6.0 3.0 3B 3K 303/304/308/309/310 312/314/316/318 320/322/324/326/328/330 0.7 0.7 0.5 3.0 3.0 4.5 4B 4K 316/320 324/330 340 0.5 0.5 0.5 5.0 5.0 5.0 5B 5K 350 354 364 0.5 0.5 0.5 5.0 5.0 5.0 Length of straight printed circuit contacts (for receptacle EZG/EYG/XPF) Models EZG/EYG XPF oC L oC L Type 0B 302/303 304/305 306/307 1B 302/303/304/305 306/307/308 310/314/316 0.7 0.7 0.7 303/304/305/306/307/308/310 312/314/316/318/319 0.7 0.7 2B E 0.7 4.3 0.5 4.3 0.5/0.8 3/4.3 - 0.7 - - 2.9 - 3.6 3.6 3.6 - - - - - - 4 5 - - - - EZG/EYG/XPF oC 18 5 o 0.6 oC 36 o 14.2 o9 o 3.8 o 5.05 135 1' 2230' 1 o 14.96 o 0.6 15' 5 o 19.84 7 o 10.08 ' 30 L L Note: This table does not apply for receptacle H; receptacle EH and plug FA. 192 H 0.6 8.8 45 2543' 2230' 5 oB Series D oH 320 D (R) LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) Fixed receptacle for printed circuit (B series) (R) P16 Holes for fixing the housing: EYG-EZG Dimensions A B Series oA B 0.81) 1.72) 1.72) 1.72) 00 0B 1B 2B XPF.0B Dimensions A B Series oA B 0B 5.08 7.62 7.62 10.16 1.7 5.08 Note: 1) To solder. 2) To screw. Fixed receptacle with elbow printed circuit contact (B-K series) P17 302 Series Dim. A 0B-0K 1B-1K 0.7 0.9 oA 1 A 2 A 2.54 oA Dim. Series L 0.7 0.9 0.9 1.27 1.27 2.54 L 0B-0K 1B-1K 2B-2K 3 1 L 2 304 A oA 2.54 Dim. Series 4 3 1 2 0B-0K 1B-1K 2B-2K L 303 A L 0.7 0.7 0.9 2.54 2.54 3.50 2.54 0B-0K.305 1B-1K.305 2B-2K.305 0B-0K / 1B-1K.306 o 0.7 2.54 2.54 2 2.54 2.54 5 6 3 4 1 3 2 2.54 2.54 2.54 2.54 1.27 1.27 2 1 1.27 3 3 4 o 0.9 2 1 5 2.54 2.54 1 4 o 0.7 4 o 0.7 5 5 2.54 2.54 7 1 6 3 7 1 6 5 9 10 2 3 1 4 4 2.54 2.54 8 1 7 6 12 11 9 10 2 3 0.92 9 2 1 4 13 14 12 18 17 14 15 7 16 2 9 18 17 13 16 14 15 3 4 8 12 6 7 6 1 5 3 10 11 8 13 1 4 2.54 2.54 2.54 2.54 5 4 2.54 2.54 2.54 2.54 9 11 5 3 1.27 10 6 2 3 1.27 15 12 5 2.54 2.54 2.54 2.54 16 12 3 4 2 1.27 1.27 13 12 11 6 13 1 o 0.7 11 1 6 7 14 11 3B-3K.318 7 1.27 14 2.54 2.54 2 8 10 o 0.7 10 9 7 3 10 4 2B-2K.318 o 0.7 8 2 8 5 2.54 2.54 2.54 2B-2K / 3B-3K.316 9 8 1B-1K / 2B-2K.314 2.54 2.54 2.54 3B-3K.314 1 1.27 3 o 0.9 5 7 8 1.27 2 6 2B-2K / 3B-3K.312 2.54 2.54 2.54 1B-1K / 2B-2K.310 1 2.54 2.54 2.54 o 0.7 2B-2K.308 6 4 1.27 2.54 2.54 7 5 2 1.27 1.27 2.54 2.54 7 3 2 2 8 4 2.54 o 0.7 4 o 0.7 o 0.9 3 1 5 6 o 0.7 5 5 6 1B-1K.308 o 0.9 4 2B-2K.307 o 0.7 0B-0K / 1B-1K.307 o 0.7 2B-2K.306 5 5.08 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 2.54 193 (R) (R) 2B-2K.319 3B-3K.320 3B-3K.324 3B-3K.330 o 0.7 11 14 7 16 15 2 13 2 1.27 7 16 17 3 1.27 7 24 16 18 2 17 1.27 Elbow receptacle (90) for printed circuit (B series) P18 P19 P18 - EPG.00.302 - XBG.00.302 XRB.00.3021) 17 27 29 22 30 9 28 8 18 19 20 21 3 4 5 6 2 P18 - EPG.00.303 - XBG.00.303 XRB.00.3031) 7 2.54 2.54 2.54 2.54 2.54 2.54 P18 - EPG.00.304 - XBG.00.304 XRB.00.3041) 5.08 5.08 o 0.8 o 0.8 o 0.8 2.54 o 0.6 0.6 2.54 = = = 0.6 = = = A 23 P20 o 0.6 A 11 24 1 5 2.54 2.54 2.54 2.54 5.08 2.54 12 25 16 4 2.54 2.54 2.54 2.54 13 26 10 6 3 5 14 15 8 19 1 6 4 9 20 23 15 18 15 4 21 22 14 8 1 6 13 9 14 5 3 19 1.3 19 13 1 20 12 8 1.27 17 10 o 0.7 18 o 0.7 12 12 1.27 9 10 o 0.7 10 11 11 P19 - EPG-EXG Screw mount 1.27 o 0.7 7.62 7.62 o 0.8 1.27 2.54 o 0.8 1.27 o 1.7 12.7 o 1.7 2.54 1.27 2.54 2.54 A 0.63 P20 - EPG.1B.314 7.62 2.54 o 0.8 7.62 2.54 0.63 0.3 1.27 P19 - EPG-EXG Solder mount A 0.7 o 0.6 0.6 12.7 0.6 2.54 1.27 Note: 1) For the XRB.00 series, the holes for shell fixing are different (see p. 40). 302 oB oA Series Dimensions A B 0S-0E 1S-1E 0.6 0.8 P21 303 C Series oA Fixed receptacle with straight printed circuit contact (S-E series) 2.2 3.0 0S-0E 1S-1E 2S-2E oB 306 Series oB oA C 1S-1E 2S-2E 3S-3E C 0.6 0.8 0.8 2.8 3.5 5.0 45 45 45 A Dimensions B C 0.8 0.8 0.8 3.5 5.5 6.5 60 60 60 C Series oB 305 1S-1E 2S-2E C 0.6 0.8 0.8 2.8 3.5 5.5 45 45 60 A Dimensions B C 0.8 0.8 3.5 5.5 C Dimensions D E F 45 45 2230' 2.75 2230' 3.25 3.25 3.90 307 D Series C 60 2S-2E 3S-3E Note: All views are from the side of the receptacle. 194 60 60 D 45 60 D F oB Dimensions B Dimensions B E 0S-0E 1S-1E 2S-2E A oA Series oA C o 0.8 304 A LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) oB Dimensions B C 0.8 0.8 6.5 7.8 310 D D 45 45 Series C 2230' 2230' 2S-2E 3S-3E A Dimensions B C D 0.8 0.8 6.5 7.8 E 45 2230' 1.25 45 2230' 1.50 oA 3S-3E.313 3S-3E.314 2.9 1.2 o 0.8 o 0.8 8x1 3.2 3.2 6 x 1.2 1.3 3.2 1.3 o 0.8 3S-3E.316 6 x 1.2 6 x 1.2 o 0.8 3S-3E.312 1.3 oA C 2S-2E 3S-3E A oB Series D E 308 (R) 3S-3E.318 o 0.8 1.2 2.9 8x1 oC Length of straight printed circuit contacts (for receptacle E) L Dimensions oC L Type 0S 0E 302 303 304 0.7 0.5 0.5 3.0 3.0 3.0 1S 1E 302 303/304/305 305/306 0.7 0.7 0.5 3.0 3.0 3.0 2S 2E 303/304/305 306/307 307/308/310 0.8 0.8 0.7 3.0 3.0 3.0 3S 3E 305/306/307/308/310 312/313/314 316/318 0.7 0.7 0.7 3.0 3.0 3.0 Elbow receptacle (90) for printed circuit (S series) P22 - EPL - EXP Screw mount o 0.8 P23 P23 - EPL.0S.116 5.08 o 1.7 7.62 o 1.1 2.54 2.54 2.54 = 7.62 2.54 7.62 2.54 2.54 2.54 2.54 = 2.54 7.62 2.54 P22 - EPL - EXP Solder mount P22 Note: This table does not apply for HGP and EHP receptacles and for FAA plugs. 2.54 Note: All dimensions are in millimeters. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 195 (R) (R) Fixed receptacle with elbow printed circuit contact (S-E series) P24 302 oA 1 A 303 Series oA C 0S-0E 1S-1E B 1 3 A Dimensions B C 0.7 0.7 2.00 2.48 304 oA 1.00 1.24 2 0S-0E 1S-1E 0.7 0.9 Series Dimensions A B 1 4 0S-0E 1S-1E 2S-2E 0.7 0.7 0.9 2 3 2.00 3.50 3.50 2.54 2.54 4 2.54 2.54 6 2 5 3 4 1 2.54 2 5 3 4 6 3 4 2.54 2S-2E / 3S-3E.310 7 2 3S-3E.312 5 2.54 2.54 3S-3E.314 1.2 2S-2E.308 1 6 o 0.7 2S-2E.307 1.27 o 0.7 2.4 2.4 1 2 3 2S-2E.306 2.4 2.4 5 o 0.9 1S-1E.306 1 o 0.7 1S-1E.305 2.54 2.54 Dim. A 2.54 B A 2 Series 1.25 2.54 2.54 2.54 1.75 4 5 5 2.54 2.54 2.54 5 9 6 10 2 9 6 10 7 11 12 2 13 3 12 14 2.54 2.54 2.54 2.54 2.54 2.54 1.2 3S-3E.316 5 9 6 10 1 13 3 15 7 11 8 12 16 1.2 4 o 0.7 14 2.4 2 2.54 2.54 2.54 196 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com o 0.7 6 8 8 5 1.2 3 4 4 1 11 o 0.7 10 7 1 2.4 7 9 6 4 1.75 6 6 2.5 3 3 8 2 1.2 1 7 o 0.7 8 o 0.7 1 2 (R) (R) Technical characteristics Outer shell Brass Plastic materials In most cases, LEMO connectors have a brass outer shell which is suitable for most general purpose applications, including civilian and military. The brass outer shells have a chrome nickel-plated surface which ensures very good protection against industrial atmosphere, salt air and most corrosive agents. Some connector shells can also be made of plastic. This solution offers optimum electrical insulating properties that are well-suited for medical applications. Black Polyoxymethylene (POM) is particularly well-adapted to products of the 00 or S series. Alternative protective coatings are available to satisfy other specific environmental conditions: Electrolytic nickel; Nickel-gold; and Nickel-black chrome. After the black chrome treatment, thepart is coated with a protective organic film. Stainless steel For applications where there are severe environmental conditions that may rapidly damage the surface finish, we recommend using stainless steel. The AISI 303 stainless steel is a material for general use adapted to most applications requiring a product made entirely of stainless metal. For the nuclear industry, where elements are subject to radiation and to vaporous nitric acid, we offer AISI 304 stainless steel. Grade AISI 316L is recommended for applications which require non-corrosiveness, such as the medical industry. Grade AISI 316L stainless steel is also well suited for connector shells that are to be soldered by an electronic beam onto a device made of the same stainless steel. Grade AISI 316L has no surface treatment. Grey or white polysulfone (PSU) and beige PEEK offer excellent mechanical properties and are suitable for gas or vapor sterilization. Some models of the 2B and 3B series are available with an outer shell of cream-colored polyphenylsulfone (PPSU). We recommend this material specifically for applications where products need to withstand hundreds of vapor sterilization cycles. Bridge plug or plugs with parallel receptacles are made of polyamide (PA.6) and are available in nine colors: blue, white, grey, yellow, brown, black, red, orange and green. Some elbow receptacle shells for printed circuits are overmolded in polyphenilene sulfide (PPS). Other metallic components In general, most metallic components are manufactured in brass. However, bronze or beryllium copper are used where good elasticity is required (for example: grounding crown). Depending upon the application, these parts have electrolytic nickel or nickel-gold plating. These parts can also be manufactured in stainless steel. Aluminium alloy Sealing gasket Light-weight aluminium alloy outer shells are ideal for applications where weight is a key factor, such as within the aeronautics and aerospace industries, together with equipment requiring ease of portability. In general, sealing gaskets are made of silicone rubber MQ/MVQ. However, for vacuum-tight receptacles and couplers, gaskets are made of fluorosilicone rubber (FPM). These materials have high mechanical strength and excellent resistance to corrosion. The shell surface is protected by anodizing which is available in six colors: blue, yellow, black, red, green and natural. Sealing resin An epoxy resin is used to seal both watertight and vacuumtight receptacle and coupler models. Shells made of high-strength alloys (Avional) are specifically designed for use in highly demanding mechanical applications, such as those served by the F series. These connector shells are protected by a conductive anthracite-colored nickel finish. Other surface finishes are also available - electrolytic nickel plating and black nickel plating - depending upon the final application. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 197 (R) (R) Materials and Treatments Component Outer shell, collet nut, conical nut or notched nut and oversized collet Grounding crown Latch sleeve Locking washer Hexagonal or round nut Other metallic components O-ring and gaskets Sealing resin Material (Standard) chrome Cu Ni Cr Brass (UNS C 38500) 0.5 Stainless steel (AISI 303, 304 or 316L) Avional (AA 2007) - Aluminium alloy (AA 6012) POM (Delrin(R) or Ertacetal(R)), Polyoxymethylene, black PEEK, Polyether ethercetone, beige PSU (Udel(R)), Polysulfone, grey or white PPSU (Radel(R)), Polyphenylsulfone, cream PA.6 (Grilon(R)), Polyamid PPS (Ryton(R)), Polyphenilene sulfide, brown - Bronze (UNS C 54400) or special brass - Beryllium Copper (UNS C 17300) Stainless steel (AISI 416 or 316L) 0.5 Special brass Stainless steel (AISI 416 or 316L) Bronze (UNS C 52100) - Brass (UNS C 38500) Stainless steel (AISI 303, 304 or 316L) Aluminium alloy (AA 6012) Brass (UNS C 38500) - Stainless steel (AISI 303, 304 or 316L) Silicone MQ/MVQ or FPM/FKM (Viton(R)) Epoxy (Araldite(R) or Stycast(R)) Notes: standards for surface treatment are as follows: Chrome-plated: FS QQ-C-320B; Nickel-plated: FS QQ-N-290A, or MIL-C-26074C; Gold-plated: ISO 4523; and Black chrome: MIL-C-14538C with a minimum of 10 m of lacquer protection. 1) anthracite color (other colors upon request) 2) for FFP, PCP and ERN models of the 0S to 3S series 3) for FFP, PCP and ERN models of the 0S to 3S series and FGG and ENG models of the 1B, 3B and 4B series 3 - - - 3 - - Surface treatment (m) nickel gold black chr. Notes Cu Ni Cu Ni Au Ni Cr 0.3 0.5 3 0.5 3 without treatment - - 5 - - anodized - - - - - - - 0.5 3 0.5 3 - 0.5 3 0.5 3 without treatment 0.3 0.5 3 0.5 3 without treatment - - 0.5 3 0.5 3 without treatment anodized natural 0.5 3 0.5 3 without treatment - - 0.5 1 2 - - - 1) 2) 3) 4) 4) 5) 6) 1.0 1.0 - - - - 0.5 - - 7) 8) 9) 9) 0.5 - - 10) 10) 0.5 - - 11) 4) 5) 6) 7) 8) 9) 10) for the FGY and ENY models of the 2B and 3B series for bridge plugs of the B series for S and B series elbow receptacles for printed circuits gold-plating for single contact types used in 00 series free and fixed receptacles and couplers AISI 416 steel is used with shells made of AISI 303 or 304 delivered with free and fixed receptacles with aluminium alloy or stainless steel shell 11) FKM is used for F series Technical characteristics of plastic materials Type Density Tensile strength (at 73.4 F) Flexurale strength (at 73.4 F) Dielectric strength Volume resis. at 50% HR and 73.4 F Surface resistivity Thermal conductivity Comparative tracking index Maxi. continuous service temperature Min. continuous service temperature Max. short-time service temperature Water absorption in 24h at 73.4 F Radiation resistance Flammability rating Resistance to steam sterilization Norme Units POM ASTM D 792 - 1.4 ASTM D 638/ ISO R527 MPa 70-80 ASTM D 790/ ISO R178 MPA - ASTM D 149/IEC 60243 kV/mm 60 ASTM D 257/IEC 60093 cm 1015 ASTM D 257 1013 ASTM C 177 W/K m 0.31 IEC 60112 V CTI 600 UL 746 F 194 UL 746 F -58 - F 284 ASTM D 570/ISO R62A % 0.85 - Gy1) 8x103 ASTM D 635/UL 94 - HB - - bad PEEK PSU PPSU PPS PA.6 1.3-1.4 1.24 1.3 1.67 1.14 92-142 70 70 121 55 170 106 91 179 75 19-25 17-20 15 17 35 - 1016 5x1016 1016 1015 1015 - - - - 0.25 0.26 - 0.3 - CTI 150 CTI 150 - CTI 200 CTI 600 482 284 356 428 176 -67 -106 -58 -106 -40 572 320 392 482 302 0.12 0.3 0.37 < 0.05 >3 - 107 105 > 107 5x103 V-0/3.2 V-0/4.4 V-0/1.6 V-0/5V V-2 excel. good excel. excel. bad Silicone FPM ~1.2 >9 - 18-30 1014 - - - 392 -58 > 482 - 105 - good ~1.9 > 12 - - Notes: 1) 1 Gy (Gray) = 100 rad ASTM = American Society for Testing Material ISO = International Standards Organization 198 UL = Underwriters Laboratories IEC = International Electrotechnical Commission LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com Epoxy 1.58 16 24 15 - 1014 - - - 0.8 - CTI>600 392 176 -4 -4 572 248 - 0.25 8x104 2x106 - V-0/4 good bad (R) (R) Mechanical latching characteristics Standard series Fv Force (N) Fv Fd Fa Series 2C 2S 3S 4S 5S 6S 00 0S 1D 1S 9 14 14 15 12 17 20 40 60 70 7 9 11 10 12 11 14 25 40 55 120 140 300 250 400 350 500 650 750 900 Watertight series Fd Force (N) Fv Fd Fa Keyed series Series 0E 1E 2E 3E 4E 5E 6E Series 00 0B 1B 2B 2G 3B 4B 5B 14 16 20 32 65 85 100 9 10 14 15 12 17 39 48 9 10 13 25 40 60 75 7 8 11 12 12 14 38 38 250 300 400 550 700 800 900 120 250 300 400 400 550 700 800 Keyed watertight series Force (N) Fv Fd Fa 4F 5F Notes: Forces were measured on outer shells not fitted with contacts. Mechanical endurance: 5000 cycles. Mechanical endurance represents the number of cycles after which the latching system is still effective (1 cycle = 1 latching/unlatching at 300 cycles per hour). The values were measured according to the standard IEC 60512-7 test 13a. 1N = 0.102 kg. The performance of a connector is measured through shielding efficiency, a value that represents the ratio between the electromagnetic field on the outside and the inside of the shell. Our measurements are carried out according to the IEC 60169-1-3 standard. -20 80 -25 90 -30 100 -35 110 500 M 70 200 M -15 20 M 60 5M -10 10 M 50 50 M 100 M The design of LEMO connectors with metal shell and grounding crown guarantee optimum shielding efficiency in all applications where electromagnetic compatibility (EMC) is critical. -5 2M When selecting a connector, screen or shielding efficiency and low resistance to electric continuity between the cable and the connector should be considered. 40 500 K 1M a) Reduce the emission of generated electromagnetic interference to a level where radios and telecommunication and other devices can properly function; b) Electromagnetic immunity against electromagnetic interference so that they can properly function. 0 10 K Electrical and electronic devices are to be designed to ensure the following: Transfer impedance The electromagnetic compatibility of a device can only be ensured by meeting a number of basic rules with the design of the device and by carefully selecting components, cables and connectors. (dB) 30 Shielding efficiency (dBOhm) 5 1G Electromagnetic compatibility (EMC) and shielding efficiency 200 K Fa: average pull force with axial pull on the collet nut Series 0F 1F 2F 3F 14 16 20 32 65 85 6 6 8 9 14 21 9 10 13 25 40 60 8 8 9 11 16 24 250 300 400 550 700 800 150 150 150 150 150 150 50 K Fd: average unmating force with axial pull on the outer shell 4K 5K 100 K Fv: average latching force Series 0K 1K 2K 3K 20 K Fa (Hz) Frequency FGG + PHG.1B FGG + PHG.1K The performance of B and S series connectors is comparable to the results of measurements carried out on a pair of FGG + PHG.1B connectors. The performance of K and E series connectors is comparable to the results of measurements carried out on a pair of FGG + PHG.1K connectors. LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 199 (R) (R) Shell electrical continuity: (measured according to IEC 60512-2 test 2f) R1 Values with grounding crown and latch sleeve or inner-sleeve nickelplated. R2 Values with gold-plated grounding crown and nickel-plated latch sleeve or inner sleeve. Test current: 1A A = Ammeter mV = Millivoltmeter G = Generator Standard series A mV G Series R1 (m) R2 (m) Series R1 (m) R2 (m) 00 0S 1D 1S 2C 3.5 2.8 2.5 2.2 - 2.8 1.6 1.1 1.5 - 2S 3S 4S 5S 6S 1.8 1.6 1.4 1.4 1.0 1.2 1.2 1.0 1.0 0.5 Series R1 (m) R2 (m) Series R1 (m) R2 (m) 00 0B 1B 2B 3.5 3.5 2.5 2.2 2.8 1.3 1.1 0.9 2G 3B 4B 5B - 2.2 1.5 1.5 - 0.7 0.5 0.3 Series R1 (m) R2 (m) Series R1 (m) 0E-0K 1E-1K 2E-2K 3E-3K 4E-4K 5E-5K 6E 2.8 2.2 1.8 1.6 1.4 1.4 1.0 1.6 1.5 1.2 1.2 1.0 1.0 0.5 0F 1F 2F 3F 4F 5F 5.0 3.0 2.5 2.5 2.0 1.5 Keyed series A Watertight series Keyed watertight series A 200 mV G mV G F series A mV G LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Insulator Plastic material used by LEMO for manufacturing insulators is selected according to the electric and thermal properties required for the various connector types. Characteristics examined for the two connector types are: - Dielectric strength; - Comparative tracking index; - Surface and volume resistivity; - Continuous service temperature; - Water absorption; - Radiation resistance; - Flammability rating; - Resistance to hydrocarbon. Radiation resistance PA 6.6 PEEK PTFE FEP PI 103 rads Gray (Gy) 101 104 102 105 103 106 104 107 105 108 106 Mechanical and Electrical Properties Mechanical characteristics of thermoplastics, such as PA 6.6, and PEEK, are improved by the addition of glass fibers. By adding glass fibers in the resin, the performance of this material (mechanical strength and radiation resistance) is enhanced and water absorption rate is reduced. From an electrical point of view, the addition of glass fibers improves dielectric strength. Damage 109 1010 7 10 108 Radiation dose Minimum to slight (almost available usable) Slight to medium (often satisfactory) Medium to serious (not usable) Note: Technical data in this chapter provide general information on plastics used by LEMO as electrical insulators. LEMO reserves the right to propose new materials with better technical characteristics, and to withdraw, without notice, any material mentioned in the present catalog or any other publications edited by LEMO S.A. and/or its subsidiaries. LEMO SA and its subsidiaries use only plastic granules, powder or bars supplied by specialized companies, and thus cannot in any case take responsibility with regard to this material. Selection of the insulator A number of thermoplastics have common characteristics, some of them are identical with other insulating materials. In this case, the insulator material is selected according to the specific difference in features to provide all the required parameters for the given type. Technical characteristics Type Standard Dielectric strength Volume resistivity at 50% RH and 73.4 F Surface resistivity Thermal conductivity Comparative tracking index Dielectric constant (106 Hz) Dissipation factor (106 Hz) Maximum continuous service temperature Maximum short-time service temperature Minimum continuous service temperature Water absorption in 24h at 73.4 F Radiation resistance Flammability rating ASTM D 149 / IEC 60243 ASTM D 257 / IEC 60093 ASTM D 257 / IEC 60093 ASTM C 177 IEC 60112 ASTM D 150 / IEC 60250 ASTM D 150 / IEC 60250 UL 746 - - ASTM D 570 / ISO R624 - ASTM D 635 / UL 94 Units PA6.6 PEEK PTFE FEP PI kV/mm cm W/K m V - - F F F % Gy - 15-17 5.8x1015 1012 0.21 CTI 600 4 - 248 302 - < 0.7 5x103 - 19-25 1016 1015 0.25 CTI 150 3.2-3.5 < 0.005 482 572 -58 < 0.3 107 V-0/3.2 17.2-24 1018 1017 0.23 CTI 500 2-2.1 < 0.0003 500 572 -328 < 0.01 2x102 V-0 20 > 1016 > 1016 0.24 - 2.1 < 0.001 392 500 -328 < 0.01 2x104 V-0 22 > 1016 > 1015 0.35 - 3.6 < 0.0034 662 866 - 0.24 106 - Note: Values of insulation resistance between contacts are given on page 203. Designation chemical Polyamide (glass fitted) Polyether Ethercetone Polytetrafluorethylene Tetrafluorethylene Polyimide First choice alternative commercial Nylatron(R) Peek(R) - - Vespel(R) Symbol PA 6.6 PEEK PTFE FEP PI Standard - - ASTM D 1457-83 ASTM D 2116-81 - Single contact 00 S E 00 S E Multicontact B K F 2C 2G 1D Special order alternative LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 201 (R) (R) Electrical contact Technical description The secure reliable electromechanical connection achieved with LEMO female cylindrical contacts is mainly due to two important design features: 1. Prod proof entry on the mating side which ensures perfect concentric mating even with carelessly handled connectors; and 2. The pressure spring, with good elasticity, maintains a constant even force on the male contact when mated. The leading edge of the pressure spring preserves the surface treatment (gold-plated) and prevents undue wear. Contact material and treatment LEMO female contacts are made of bronze beryllium (QQ-C530) or bronze (UNS C 54400). These materials are chosen because of their high modulus of elasticity, their excellent electrical conductivity and a high mechanical strength. LEMO male solder and printed circuit contacts are made of brass (UNS C 38500). Male crimp contacts are made of brass (UNS C 34500) or annealed brass (UNS C 38500) with optimum hardness (HV) for crimping onto the wire. Type Au Ni Cu Male crimp Bronze or brass Material (standard) Surf. treatment (m) Cu Ni Au1) 0.5 3 1.0 Male printed circuit Brass (UNS C 34500) Brass (UNS C 38500) Brass (UNS C 38500) Femalle crimp Female printed circuit Bronze (UNS C 54400) Cu-Be (FS QQ-C-530) 0.5 3 1.5 Clips Cu-Be (FS QQ-C-530) Stainless steel - - - Wire2) Brass - 33) - Notes: The standard surface treatment are as follows: Nickel: FS QQ-N-290A or MIL-C-26074C; and Gold: ISO 4523. 1) Minimum value 2) For elbow printed circuit contacts 3) Treatment completed by 6 m Sn-Pb tin-plating Thickness comparison between the outside and the inside of female contacts A 2.5 A 2.5 Note: A = inspection point Contact oA (mm) male (m) 0.5 0.7 0.9 1.3 1.6 2.0 3.0 4.0 5.0 6.0 8.0 12.01) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 - Gold thickness female outside (m) inside (%) 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 - 65 70 75 75 75 75 75 75 75 75 75 - Notes: 1) Contacts are silver plated. 202 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) Contact resistance with relation to the number of mating cyles (measured according to IEC 60512-2 test 2a) (R) Insulation resistance between the contacts and contact/shell (measured according to IEC 60512-2 test 3a) Maximum values measured after the mating cycles and the salt spray test according to IEC 60512-6 test 11f. Ao (mm) 0.5 0.7 0.9 1.3 1.6 2.0 Contact resistance (m) 1000 3000 5000 cycles cycles cycles 7.5 5.6 4.1 2.8 2.6 2.9 8.3 5.7 4.2 2.9 2.7 3.1 8.7 6.1 4.8 3.6 3.5 3.3 Ao (mm) 3.0 4.0 5.0 6.0 8.0 12.0 Contact resistance (m) 1000 3000 5000 cycles cycles cycles 2.0 1.6 1.4 1.2 0.8 0.7 2.2 2.0 - - - - 3.1 2.8 - - - - Multicontact Single contact PEEK PTFE Insulating material > 1012 > 1010 new after humidity test1) > 1012 > 1010 Note: 1) 21 days at 95% RH according to IEC 60068-2-3. Solder contacts The conductor bucket of these contacts is machined at an angle to form a cup into which the solder can flow. See page 9 for the range of cable dimensions that can be soldered. Crimp contacts Advantages of crimping The square form crimp method is used (MIL-C-22520F, class I, type 2) photo 1 for single contact contacts. - practical, quick contact fixing outside the insulator - possible use at high temperature - no risk of heating the insulator during the conductorcontact fixing - high tensile strength For multicontact contacts the standard four-identer crimp method is used, MIL-C-22520F, class I, type 1), photo 2. The crimp method requires a controlled compression to obtain a symmetrical deformation of the conductor strand and of the contact material. The radial hole in the side of the contact makes it possible to check whether the conductor is correctly positioned within the contact. A good crimping is characterized by only slightly reduced conductor section and practically no gap. For optimum crimping of bronze or brass contacts they are annealed to relieve internal stress and reduce material hardening during the crimping process. Crimp contacts are available in standard version (microphoto 1) for mounting maximum size conductors. For some dimensions, these crimp contacts can be produced with reduced crimp barrels (microphoto 2) for mounting reduced size conductors. 1 2 3 Only the crimping zone is annealed with the help of an induction heating machine designed by the LEMO Research and Development Department (see photo 3). Crimp contacts The crimp contacts can be with two forms: a standard crimp barrel for large conductors (see fig. 1) or with a reduced crimp barrel for smaller conductors (see fig. 2). Fig. 1 The range of cable dimensions that can be crimped into our contacts are indicated on the table on page 9. Fig. 2 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 203 (R) (R) Printed circuit contacts Printed circuit contacts are available in straight or elbow versions for certain connector types, mostly for straight and elbow receptacle models. Connection is made on flexible or rigid printed circuits by soldering. Straight printed circuit contacts are gold-plated which guarantees optimum soldering, even after long-term storage. straight However for wave soldering, we recommend removal of the gold-plating from the contact end on the printed circuit side before soldering according to the assembly procedures. Printed circuit elbow contacts include a tinned brass wire crimped into a crimp contact. elbow Test voltage Test voltage (Ue): (measured according to the IEC 60512-2 test 4a standard). It corresponds to 75% of the mean breakdown voltage. Test voltage is applied at 500 V/s and the test duration is one minute. This test has been carried out with a mated plug and receptacle, with power supply only on the plug end. Operating voltage (Us): It is proposed according to the following ratio: Us = Ue 3 Caution: For a number of applications, safety requirements for electrical appliances are more severe with regard to operating voltage. Voltage values are given in the table on insulator types for each series corresponding with values measured at sea level and are adapted to all applications up to an altitude of 2000 m. In case a device is used at a higher altitude, air clearance between live parts has to be multiplied by the following coefficients: (Test voltage also has to be divided by this coefficient). altitude (m) coefficient 2000 3000 4000 5000 1.00 1.14 1.29 1.48 In such cases operating voltage is defined according to creepage distance and air clearance) between live parts. Please consult us for the choice of a connector by indicating the safety standard to be met by the product. Rated current The current values are indicated in the table of insulator types in each series. For use at higher temperatures, acceptable rated current will be lower. It tends towards zero as the material is used at the maximum operating temperature accepted for the insulator. In most cases, the current depends on the conductor dimension (see table on page 210), or on the printed circuit dimension. Caution: In general, connectors should not be unmated while live. 204 Rated current (A) 100% 75% 50% for the insulator The specified rated current can be applied simultaneously to all the contacts, corresponding with an average temperature rise of 104 F of the connector. For connectors with PEEK insulator, maximum admissible current will follow the curve below depending on the operating temperature T. Minimum operating temperature (measured according to IEC 60512-3 test 5a). 25% T (F) 0 122 212 302 392 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 482 (R) (R) Cable fixing Cables are fixed into LEMO connectors with cable collet systems. These collets with latches have a design which is very similar to those used for tool machines. This solution guarantees excellent cable retention and ensures perfectly symmetrical deformation of the cable. The 00 multicontact series is also available with hexagonal crimping (MIL-C-22520F). In the F series cable fixing is ensured by "tie-wrap" junction of the cable screen on the connector outer shell and a thermofit jacket. Material and treatment Material (standard) Component Center piece Collet Crimp ferrule Reducer Reducing cone Grounding cone Metal washer Brass (UNS C 38500) Brass (UNS C 38500) Copper (UNS C 18700) Brass (UNS C 38500) Brass (UNS C 38500) Brass (UNS C 38500) Brass (UNS C 38500) Gasket Silicone MQ/MVQ FPM (Viton(R)) Surface treatment (m) Nickel Gold Cu Ni Cu Ni Au 0.5 0.5 0.5 0.5 0.5 0.5 0.5 3 3 3 3 3 3 3 - - 0.5 - - - - - - 3 - - - - - - 0.5 - - - - Notes: Standards for surface treatment are as follows: Nickel-plated: FS QQ-N-290A. - Cable clamping Type C cable clamping (S, E and 2C series) This system includes an grounding center-piece or and a collet which is compressed by the collet nut to ensure a good clamping to the cable. When assembling the cable, the cable shield is gripped between the grounding center-piece and the collet. The grounding center-piece design depends on the connector type: - In one single part with opening for S and E series single contact and multicontact series with contacts only on the circumference of the insulator; - In two parts for multicontact type connectors with contacts on the circumference and the center of the insulator. 3 1 2 4 1 In standard watertight series (0E to 5E), C type clamping is completed by a flexible gasket providing for watertightness on the cable end, by a metal washer which prevents the gasket from rotating during the clamping; and by an grounding cone which tightens the screen onto the grounding center-piece or . 3 7 6 5 2 1 4 1 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 205 (R) (R) The clamping system for 6E series connectors has been slightly modified in regards to its dimensions. The clamping system now includes a long collet , an grounding collet , a counter-cone , a flexible gasket and a metal washer which prevents the gasket from rotating during the clamping. When mating the assembly, the grounding collet is positioned onto the outer jacket. The cable screen is folded back around the collet extremity and then soldered. The collet is closed with the help of the counter-cone which is pressed against the collet when tightening the collet nut . For assembling unscreened cables, the collet nut is not used. 8 9 2 5 6 1 Type D cable clamping (FFL model 2S series) This clamping system is assembled onto FFL plugs designed for crimp contacts. It includes the same components as the B series, see page 207. Type L cable clamping (S and 2C series) This clamping system which includes in one part the center-piece and the collet, does not make it possible to connect the cable shield to the connector shell. It is delivered only upon request and can only be assembled onto single contact or multicontact type connectors. This is the only possible clamping type for the 5S.112 type. 2 1 1 Type K cable clamping (S and E series) This clamping system provides for screened or unscreened cables with diameters larger than maximum specified for each series. It includes an oversize collet housing , the collet and the collet nut of the next series size up. It requires a longer split center-piece . 4 1 2 10 1 In standard watertight series (E series), the K type clamping type is completed by the flexible gasket providing for watertightness on the cable end, by the metal washer which prevents the gasket from rotating during the clamping and the grounding cone of the next series size up which clamps the shield onto the longer split center-pieces . 1 10 4 7 6 5 2 1 206 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Type E cable clamping (00 single contact series) This clamping type is specified only for the single contact 00 series. The rear end of the crimp backnut which receives the shield braid is knurled to ensure a good retention of the shield once crimped under the crimp ferrule . 1 4 Type D cable clamping (B, 2G and 1D series) This clamping system includes two split insert carriers which position the insulator into the connector and a collet which is compressed by the collet nut ensuring the cable clamping. When assembling the connector, the cable shield is clamped between the split insert carrier and the collet. 4 1 2 1 4 Type M cable clamping (B series) This clamping system is adapted to cables with a diameter smaller than the smallest diameter specified for each series. It 12 , a collet of a smaller series and a reducing cone 11 . includes a reducer These parts have the same function as the D type collet. 4 1 11 2 12 1 4 Type C cable clamping (K series) In the watertight series (K series), the C type clamping system is completed by a flexible gasket providing for watertightness on the cable end, by a metal washer preventing the gasket from rotating when the collet nut is clamped and an grounding cone which clamps the shield onto the split insert carrier . 4 7 6 5 2 1 1 4 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 207 (R) (R) Type K cable clamping (K series) In the watertight keyed series (K series), the clamping system provides for using screened or unscreened cables, with a diameter larger than the maximum specified for each series. The shell is completed by an oversize collet housing . The collet and watertightness on the cable end are identical to type C cable clamping but are of the next series size up. The grounding cone clamps the shield onto the longer split center-pieces . 1 10 4 7 6 2 5 4 1 Maximum metal collet nut tightening torque Standard series 0S 1D 1S Series 2C 2S 3S 4S 5S 6S 0.25 0.5 1.5 1.5 2.5 6 8 10 12 00 Torque (Nm) Watertight series 2.5 Keyed series 0B 1B Series 2B 2G 3B 4B 5B 0.25 0.5 1.5 2.5 4 7 10 2.5 Torque (Nm) Maximum plastic collet nut tightening torque 1) 00 Torque (Nm) 1E 2E 0.7 0.8 2 Series 3E 4E 5E 6E 3 5 8 12 4K 5K 5 8 Watertight keyed series 00 Torque (Nm) Torque (Nm) 0E 0S 1S 2S Series 3S 1B 2B 3B 0K 1K Series 2K 3K 0.7 0.8 2 3 1N = 0.102 kg 4B 0.15 0.45 0.50 0.50 1.00 0.50 0.50 1.00 1.50 Note: 1) For applications subject to strong vibration, we recommend fixing the collet nut with epoxy resin. 208 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com (R) (R) Technical tables Table of American Wire Gauge Construction AWG 4 6 8 8 10 10 10 12 12 12 12 1) 12 14 14 14 1) 14 16 1) 16 16 16 1) 16 18 1) 18 1) 18 18 18 18 20 1) 20 20 20 20 22 22 22 24 1) 24 24 24 26 26 26 28 1) 28 28 30 30 32 32 34 36 38 40 Strand nb AWG/ strand 133 133 168 133 105 37 1 65 37 19 7 1 41 19 7 1 65 26 19 7 1 65 42 19 16 7 1 42 19 10 7 1 19 7 1 42 19 7 1 19 7 1 19 7 1 7 1 7 1 1 1 1 1 25 27 30 29 30 26 10 30 28 25 20 12 30 27 22 14 34 30 29 24 16 36 34 30 30 26 18 36 32 30 28 20 34 30 22 40 36 32 24 38 34 26 40 36 28 38 30 40 32 34 36 38 40 Table of wire gauges according to IEC-228 standard o wire max (mm) 6.9596 5.5118 4.4450 4.3942 3.3020 2.9210 2.6162 2.5146 2.3114 2.3622 2.5400 2.0828 2.0574 1.8542 2.0828 1.6510 1.5748 1.5748 1.4986 1.5494 1.3208 1.2700 1.2700 1.3208 1.2954 1.2700 1.0414 1.0160 1.0414 1.0160 0.9906 0.8382 0.8382 0.7874 0.6604 0.6604 0.6858 0.6350 0.5588 0.5588 0.5080 0.4318 0.4318 0.4064 0.3302 0.3302 0.2794 0.2794 0.2286 0.1693 0.127 0.1016 0.078 Wire section (in) (mm2) (sq in) 0.274 0.217 0.175 0.173 0.13 0.115 0.103 0.099 0.091 0.093 0.1 0.082 0.081 0.073 0.082 0.065 0.062 0.062 0.059 0.061 0.052 0.05 0.05 0.052 0.051 0.05 0.041 0.04 0.041 0.04 0.039 0.033 0.033 0.031 0.026 0.026 0.027 0.025 0.022 0.022 0.02 0.017 0.017 0.016 0.013 0.013 0.011 0.011 0.009 0.007 0.005 0.004 0.003 21.5925 13.5885 8.5127 8.6053 5.3204 4.7397 5.2614 3.2936 2.9765 3.0847 3.6321 3.3081 2.0775 1.9413 2.2704 2.0820 1.3072 1.3174 1.2293 1.4330 1.3076 0.8234 0.8447 0.9627 0.8107 0.8967 0.8229 0.5320 0.6162 0.5067 0.5631 0.5189 0.3821 0.3547 0.3243 0.2045 0.2407 0.2270 0.2047 0.1540 0.1408 0.1281 0.0925 0.0887 0.0804 0.0568 0.0507 0.0341 0.0324 0.0201 0.0127 0.0081 0.0049 0.0335 0.0211 0.0132 0.0133 0.0082 0.0073 0.0082 0.0051 0.0046 0.0048 0.0056 0.0051 0.0032 0.0030 0.0035 0.0032 0.0020 0.0020 0.0019 0.0022 0.0020 0.0013 0.0013 0.0015 0.0013 0.0014 0.0013 8.2 x 10-4 0.0010 7.9 x 10-4 8.7 x 10-4 8.0 x 10-4 5.9 x 10-4 5.5 x 10-4 5.0 x 10-4 3.2 x 10-4 3.7 x 10-4 3.5 x 10-4 3.2 x 10-4 2.4 x 10-4 2.2 x 10-4 2.0 x 10-4 1.4 x 10-4 1.4 x 10-4 1.2 x 10-4 8.8 x 10-5 7.9 x 10-5 5.3 x 10-5 5.0 x 10-5 3.1 x 10-5 2.0 x 10-5 1.3 x 10-5 7.5 x 10-6 Conductor no x O (mm) 196 x 0.40 7 x 2.14 125 x 0.40 7 x 1.72 1 x 4.50 80 x 0.40 7 x 1.38 1 x 3.60 84 x 0.30 7 x 1.50 1 x 2.76 56 x 0.30 7 x 0.86 1 x 2.25 50 x 0.25 7 x 0.68 1 x 1.78 30 x 0.25 7 x 0.52 1 x 1.14 32 x 0.20 7 x 0.43 1 x 1.15 42 x 0.15 28 x 0.20 1 x 1.0 28 x 0.15 16 x 0.20 1 x 0.80 7 x 0.25 1 x 0.60 14 x 0.15 7 x 0.20 18 x 0.10 14 x 0.10 21 x 0.07 14 x 0.10 Max O (mm) 7.50 6.10 6.00 4.90 4.50 4.70 3.95 3.60 3.70 3.15 2.76 2.80 2.58 2.25 2.15 2.04 1.78 1.60 1.56 1.40 1.35 1.29 1.15 1.20 1.15 1.00 0.95 0.90 0.80 0.75 0.60 0.75 0.65 0.50 0.40 0.40 0.40 Max O (in) Section (mm2) Section (sq in) 0.295 0.240 0.236 0.192 0.177 0.155 0.155 0.141 0.145 0.124 0.108 0.110 0.098 0.082 0.084 0.080 0.070 0.062 0.061 0.055 0.053 0.050 0.045 0.047 0.045 0.039 0.037 0.035 0.031 0.029 0.023 0.029 0.023 0.019 0.015 0.015 0.015 25.00 25.00 16.00 16.00 16.00 10.00 10.00 10.00 6.00 6.00 6.00 4.00 4.00 4.00 2.50 2.50 2.50 1.50 1.50 1.50 1.00 1.00 1.00 0.75 0.75 0.75 0.50 0.50 0.50 0.34 0.28 0.25 0.22 0.14 0.11 0.09 0.09 0.0387 0.0387 0.0248 0.0248 0.0248 0.0155 0.0155 0.0155 0.0093 0.0093 0.0093 0.0062 0.0062 0.0062 0.0038 0.0038 0.0038 0.0023 0.0023 0.0023 0.0015 0.0015 0.0015 0.0011 0.0011 0.0011 7.7 x 10-4 7.7 x 10-4 7.7 x 10-4 5.2 x 10-4 4.3 x 10-4 3.8 x 10-4 3.4 x 10-4 2.1 x 10-4 1.7 x 10-4 1.3 x 10-4 1.3 x 10-4 Note: 1) Not included in the standard LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com 209 (R) (R) Maximum current rating for conductor Maximum current on insulated conductors up to an ambiant temperature of 86 F (from VDE 0100, parts 430 and 532 as well as other VDE regulations). Nominal section mm2 Group 2 Intens. max. A Group 3 Intens. max. A 0.08 0.14 0.25 0.34 0.50 0.75 1.00 1.50 2.50 1.0 2.0 4.0 6.0 9.0 12.0 15.0 18.0 26.0 1.5 3.0 5.0 8.0 12.0 15.0 19.0 24.0 32.0 Group 2 Multi-conductor, e. g. solid cable under sheath, shielded cable, lead-sheath cables, etc. Group 3 Single conductor and single conductor cable laid on open air in a way to leave at least a space between them equal to their diameter. Some formulae Resistance R of a conductor: R = x Impedance of coaxial line: Z = l [] A Where: = conductor resistivity l = conductor length A = conductor cross-section 138 D x log [] r d Signal attenuation: Attenuation = 20 x log U1 [dB] U2 r = dielectric constant D = dielectric outer diameter d = center conductor outer diameter U1 = input signal voltage U2 = output signal voltage Conversion of some units Millimeters into inches: 1 mm = 0.0394 in Inches into millimeters: 1 in = 25.4 mm Centimeters into feet: 1 cm = 0.0328 ft Feet (12 in) into centimeters: 1 ft = 30.48 cm Square centimeters into square inches: 1 cm2 = 0.155 sq in Square inches into square centimeters: 1 sq in = 6.4516 cm2 Bar into psi (pounds per square inch): 1 bar = 14.51 psi Bar into Pascal: 1 bar = 105 Pa C into F: F = C x 1.8 + 32 Newtonmeter (Nm) into inch pound (in x lb) 1 Nm = 8.85 in x lb Mbar x l x s-1 into Torr x l x s-1 1 mbar x l x s-1 = 1.33 Torr x l x s-1 210 LEMO USA Inc. P.O. Box 2408 Rohnert Park CA 94927-2408 Phone (707) 578 88 11 Fax (707) 578 08 69 lemous@lemousa.com