SN Series Crystal Clock Oscillator (XO) Legacy SEL383 Series 7.0 x 5.0mm SN 3.3V PECL Low Jitter XO Package: Recommended Land Pattern: 7.0 x 5.0mm Ceramic SMD Product Features * 50 to 220 MHz Frequency Range * <1 ps RMS jitter with advanced non-PLL, patented design (U.S. Patent #7002423) Pin Functions: Pin Function * Thicker crystal for improved reliability 1 OE or NC * RoHS compliant 2 OE or NC Product Description The SN Series 3.3V crystal clock oscillator achieves superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a patented oscillator design, is compatible with LVPECL logic levels. The device, available on tape and reel, is contained in a 7.0 x 5.0mm surface-mount ceramic package. 3 V EE 4 Q Output 5 Q Output 6 VCC Part Ordering Information: SN XXX YYYY Applications The SN Series is an ideal reference clock for high-speed applications requiring low jitter, including: A: ProductFamily B: XXX = FrequencyCode C: YYYY = SpecificationCode Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. * 1/10 Gigabit Ethernet * 2/4/10G Fibre Channel Legacy Ordering Information - For Reference Only: * Serial Attached SCSI (SAS) S EL383 3 B - 212.500 (T) * SONET/SDH linecards Product Series * Passive Optical Network (PON) devices Output Enable/Disable Function 0 = N/C pin 1, and pin 2 3 = OE pin 1, N/C pin 2 4 = N/C pin 1, OE pin 2 * HD Video Systems SaRonix-eCeraTM is a Pericom(R) Semiconductor company Packaging (T) = Tape & Reel full reel increments Blank = Bulk packaged SaRonix * Server & Storage platforms * US: +1-408-435-0800 TW: +886-3-4518888 Output Frequency (MHz) Frequency Stability A = 25 ppm (-10 to +70C) B = 50 ppm (-10 to +70C) E = 50 ppm (-40 to +85C) * All specifications are subject to change without notice. www.saronix-ecera.com SN 3.3V REV2009_JAN26_01.7 1 3.3V PECL Low Jitter XO SN SN Series Crystal Clock Oscillator (XO) Legacy SEL383 Series | 7.0 x 5.0mm Electrical Performance Parameter Min. Output Frequency Typ. Max. Units 220 MHz 3.30 3.63 V 70 mA 50 Supply Voltage 2.97 Supply Current, Output Enabled 60 25 A 20 to 50 ppm Supply Current, Output Disabled Frequency Stability Operating Temperature Range -20 +70 -40 +85 As specified See Note 1 below Commercial (standard) C Industrial (standard) VCC - 1.620 V 0 to +85C VCC - 1.555 V -40 to 0C VCC - 1.025 V 0 to +85C VCC - 1.085 V -40 to +0C Output Logic 0, VOL Output Logic 1, VOH Notes Output Load output requires termination 50 to VCC - 2V Duty Cycle 45 55 % Measured 50% V DD Measured 20/80% of waveform Rise and Fall Time 500 850 ns Jitter, Phase 0.25 1 ps RMS (1-) Jitter, Total 25 40 ps pk-pk 12 kHz to 20 MHz frequency band 1000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (5 year at 40C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin OE), Output Enable Typ. Max. Units 2.2 Input Voltage (pin OE), Output Disable (low power standby) Internal Pullup Resistance 0.8 50 Notes V or open V Outputs disabled to Hi-Z k Output Disable Delay 200 ns Output Enable Delay 10 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 SaRonix-eCeraTM is a Pericom(R) Semiconductor company * Max. Units +125 C US: +1-408-435-0800 TW: +886-3-4518888 Notes * All specifications are subject to change without notice. www.saronix-ecera.com SN 3.3V REV2009_JAN26_01.7 2 3.3V PECL Low Jitter XO SN SN Series Crystal Clock Oscillator (XO) Legacy SEL383 Series | 7.0 x 5.0mm Typical Phase Noise -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 100 1k SaRonix-eCeraTM is a Pericom(R) Semiconductor company 10k * 100k 1M 10M US: +1-408-435-0800 TW: +886-3-4518888 100M * All specifications are subject to change without notice. www.saronix-ecera.com SN 3.3V REV2009_JAN26_01.7 3 3.3V PECL Low Jitter XO SN SN Series Crystal Clock Oscillator (XO) Legacy SEL383 Series | 7.0 x 5.0mm Test Circuit Test Point (Termination internal to scope) +2V 0.1F 0.01F 6 5 4 1 2 3 507 507 -1.3V 0.1F 0.01F Output Enable/Disable Function (OE function present on specified pin) Reflow Soldering Profile As per IPC/JEDEC J-STD-020C Temperature - C 1 to 3C/sec max 260 Peak 260C for 10 sec max 1 to 3C/sec 217 60 to 90 sec Time 4 to 6 minutes max Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com SN 3.3V REV2009_JAN26_01.7 4