LITE-ON SEMICONDUCTOR GLASS PASSIVATED UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS 15KP SERIES REVERSE VOLTAGE - 17 to 200 Volts POWER DISSIPATION - 15000 WATTS R-6 FEATURES Glass passivated chip Low leakage Uni and Bidirectional unit Excellent clamping capability The plastic material has U/L recognition 94V-O Fast response time A B A C D R-6 MECHANICAL DATA Case : Molded Plastic Marking : Unidirectional - type number and cathode band Bidirectional - type number only Weight : 0.07 ounces, 2.1 grams Min. Dim. A 25.4 Max. - B 9.10 8.60 1.32 1.22 9.10 8.60 D All Dimensions in millimeter C MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. CHARACTERISTICS SYMBOLS VALUE UNIT PEAK POWER DISSIPATION AT TA = 25 C, TP = 1ms (Note 1) PPK 15000 WATTS Peak Forward Surge Current 8.3ms single half sine-wave super imposed on rated load (Note 2) IFSM 400 AMPS PM(AV) 3.5 WATTS TJ -55 to +175 C TSTG -55 to +175 C Steady State Power Dissipation at TL =120 C lead lenghts 0.375" (9.5mm) , see fig.4 Operating Temperature Range Storage Temperature Range REV. 7, Sep-2012, KDIG03 NOTES : 1. Non-repetitive current pulse, per fig. 5 and derated above TA= 25 C per fig. 1 2. 8.3ms single half sine-wave duty cycle= 4 pulses per minutes maximum (uni-directional units only). RATING AND CHARACTERISTIC CURVES 15KP SERIES FIG.2 - TYPICAL JUNCTION CAPACITANCE 10000 100 75 1000 50 25 10 X 1000 WAVEFORM AS DEFINED BY R.E.A. 0 0 25 50 75 125 100 150 175 200 CAPACITANCE , PF PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 10 TA AMBIENT TEMPERATURE, 2 10 1000 100 REVERSE VOLTAGE , VOLTS 100 TA =25 C 10 Non-repetive Pulse Waveform Shown in Figure 5 1 0.1us 1.0us 10us 100us 1.0ms 10ms 5 4 3 2 1 60Hz RESISTIVE OR INDUCTIVE LOAD 0 0 25 TP, PULSE WIDTH 50 75 TR=10us Peak value (IRSM) 100 Half value= IRSM 2 Pulse width (TP) is defined as that point where the peak current decays to 50% of IRSM 50 10 x 1000 waveform as defined by R.E.A. TJ=25 C TP 0 0 100 125 TL, LEAD TEMPERATURE FIG.5 - PULSE WAVEFORM IP, PEAK PULSE CURRENT , (% ) PP, PEAK POWER ( KW ) 1000 FIG.4 - STEADY STATE POWER DERATING CURVE PM(AV), STEADY STATE POWER DISSIPATION (W) FIG.3 - PULSE RATING CURVE 1.0 2.0 T , TIME ( ms ) 3.0 4.0 150 175 200 LITE-ON SEMICONDUCTOR Type Number (UNI) Type Number Reverse Standoff Voltage (BI) Breakdown Voltage BV Volts @It Max. Reverse Leakage @VR Max. Clamping Voltage @Ipp Max. Peak Pulse Current VR (V) Min (V) Max (V) It (mA) IR (uA) Vc (V) Ipp (A) 15KP17A 15KP17CA 17.0 18.9 20.9 50 5000 29.3 511.9 15KP18A 15KP18CA 18.0 20.0 22.1 50 5000 30.9 485.4 15KP20A 15KP20CA 20.0 22.2 24.5 20 1500 34.3 437.3 15KP22A 15KP22CA 22.0 24.4 27.0 10 500 37.1 404.3 15KP24A 15KP24CA 24.0 26.7 29.5 5 150 40.5 370.4 15KP26A 15KP26CA 26.0 28.9 31.9 5 50 44.0 340.9 15KP28A 15KP28CA 28.0 31.1 34.4 5 25 47.5 315.8 15KP30 15KP30C 30.0 33.3 40.7 5 15 56.2 266.9 15KP30A 15KP30CA 30.0 33.3 36.8 5 15 50.7 295.9 15KP33 15KP33C 33.0 36.7 44.8 5 10 60.6 247.5 15KP33A 15KP33CA 33.0 36.7 40.6 5 10 54.8 273.7 15KP36 15KP36C 36.0 40.0 48.9 5 10 66.0 227.3 15KP36A 15KP36CA 36.0 40.0 44.2 5 10 59.7 251.3 15KP40 15KP40C 40.0 44.4 54.3 5 10 72.8 206.0 15KP40A 15KP40CA 40.0 44.4 49.1 5 10 65.8 228.0 15KP43 15KP43C 43.0 47.8 58.4 5 10 77.1 194.6 15KP43A 15KP43CA 43.0 47.8 52.8 5 10 69.7 215.2 15KP45 15KP45C 45.0 50.0 61.1 5 10 80.7 185.9 15KP45A 15KP45CA 45.0 50.0 55.3 5 10 73.0 205.5 15KP48 15KP48 48.0 53.3 65.1 5 10 85.9 174.6 15KP48A 15KP48CA 48.0 53.3 58.9 5 10 77.7 193.1 15KP51 15KP51 51.0 56.7 69.3 5 10 91.5 163.9 15KP51A 15KP51CA 51.0 56.7 62.7 5 10 82.8 181.2 15KP54 15KP54C 54.0 60.0 73.3 5 10 96.8 155.0 15KP54A 15KP54CA 54.0 60.0 66.3 5 10 87.5 171.4 15KP58 15KP58C 58.0 64.4 78.7 5 10 104.0 144.2 15KP58A 15KP58CA 58.0 64.4 71.2 5 10 94.0 159.6 15KP60 15KP60C 60.0 66.7 81.5 5 10 107.0 140.2 15KP60A 15KP60CA 60.0 66.7 73.7 5 10 97.3 154.2 15KP64 15KP64C 64.0 71.1 86.9 5 10 115.0 130.4 15KP64A 15KP64CA 64.0 71.1 78.6 5 10 104.0 144.2 15KP70 15KP70C 70.0 77.8 95.1 5 10 126.0 119.0 15KP70A 15KP70CA 70.0 77.8 86.0 5 10 114.0 131.6 15KP75 15KP75C 75.0 83.3 101.8 5 10 135.0 111.1 15KP75A 15KP75CA 75.0 83.3 92.1 5 10 122.0 123.0 15KP78 15KP78C 78.0 86.7 105.9 5 10 140.0 107.1 119.0 15KP78A 15KP78CA 78.0 86.7 95.8 5 10 126.0 15KP85 15KP85C 85.0 94.4 115.4 5 10 152.0 98.7 15KP85A 15KP85CA 85.0 94.4 104.3 5 10 137.0 109.5 15KP90 15KP90C 90.0 100.0 122.2 5 10 160.0 93.8 15KP90A 15KP90CA 90.0 100.0 110.5 5 10 146.0 102.7 Type Number Type Number Reverse Standoff Voltage (BI) (UNI) Breakdown Voltage BV Volts @It Max. Reverse Leakage @VR Max. Clamping Voltage @Ipp Max. Peak Pulse Current VR (V) Min (V) Max (V) It (mA) IR (uA) Vc (V) Ipp (A) 15KP100 15KP100C 100.0 111.0 135.6 5 10 179.0 83.8 15KP110 15KP110C 110.0 122.0 149.1 5 10 196.0 76.5 15KP120 15KP120C 120.0 133.0 162.5 5 10 214.0 70.1 15KP130 15KP130C 130.0 144.0 176.0 5 10 231.0 64.9 15KP150 15KP150C 150.0 167.0 204.1 5 10 268.0 56.0 15KP160 N/A 160.0 178.0 217.5 5 10 287.0 52.3 15KP170 N/A 170.0 189.0 231.0 5 10 304.0 49.3 15KP180 N/A 180.0 200.0 244.4 5 10 321.0 46.7 15KP200 N/A 200.0 222.0 271.3 5 10 356.0 42.1 NOTES: Suffix 'C' denotes bidirectional device. Suffix 'A' denotes 5% tolerance device, no suffix denotes 10% tolerance device . Legal Disclaimer Notice 15KP SERIES Important Notice and Disclaimer LSC reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design, purchase or use. LSC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does LSC assume any liability for application assistance or customer product design. LSC does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of LSC. LSC products are not authorized for use as critical components in life support devices or systems without express written approval of LSC.