D8015L - Littelfuse Inc. - Datasheet.Live

347

Revised: November 1, 2010 05:04 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

15 / 20 / 25 Amp Rectiﬁers

Dxx15L & Dxx20L & Dxx25L Series

Description

Main Features

Silicon rectiﬁers that are excellent for DC phase control

applications with motor loads.

Isolated mounting tab allows for use in circuits with

common anode or common cathode connections.

Symbol Value Unit

IT(RMS) 15 / 20 / 25 A

VRRM 400 to 1000 V

Absolute Maximum Ratings

Symbol Parameter Test Conditions Value Unit

Dxx15L Dxx20L Dxx25L

IF(RMS) RMS forward current Dxx15L: TC = 85°C

Dxx20L/Dxx25L: TC = 80°C

15 20 25 A

IF(AV) Average forward current 9.5 12.7 15.9 A

IFSM Peak non-repetitive surge current

single half cycle; f = 50Hz;

TJ (initial) = 25°C 188 255 300

single half cycle; f = 60Hz;

TJ (initial) = 25°C 225 300 350

I2t I2t Value for fusing tp = 8.3 ms 210 3 74 508 A2s

Tstg Storage temperature range -40 to 150 °C

TJOperating junction temperature range -40 to 125 °C

Note: xx = voltage

Schematic Symbol

Applications

Typical applications are AC to DC solid-state switches for

industrial power tools, exercise equipment, white goods,

and commercial appliances.

Internally constructed isolated package is offered for ease

of heat sinking with highest isolation voltage.

Features & Beneﬁts

• RoHS Compliant

• Glass – passivated

junctions

• Voltage capability up to

1000 V

• Surge capability up to

350 A

Agency Approval

Agency Agency File Number

®L Package : E71639

348

Revised: November 1, 2010 05:04 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

15 / 20 / 25 Amp Rectiﬁers

Dxx15L & Dxx20L & Dxx25L Series

Electrical Characteristics (TJ = 25°C, unless otherwise speciﬁed)

Symbol Parameter Test Conditions Value Unit

trr Reverse-recovery Time IF=0.9A, IR=1.5A TYP. 4 μs

Static Characteristics

Symbol Test Conditions Value Unit

VFM

15A Device IT = 30A; tp = 380μs

MAX. 1. 6 V20A Device IT = 40A; tp = 380μs

25A Device IT = 50A; tp = 380μs

IRM VRRM

TJ = 25°C

400-600V

MAX.

μA

800-1000V 20

TJ = 100°C

400-800V 500

1000V 3000

TJ = 125°C 400-800V 1000

Thermal Resistances

Symbol Parameter Value Unit

Rθ(J-C) Junction to case (AC)

Dxx15L 2.85

°C/WDxx20L 2.55

Dxx25L 2.50

Note: xx = voltage

Figure 1: On-State Current vs. On-State

Voltage (Typical)

TJ = 25°C

100

120

140

160

0.70.8 0.91.0 1.11.2 1.31.4 1.51.6 1.71.8

Dxx25L

Dxx20L

Dxx15L

Instanta neous Forward Voltage (vF) – Volts

Instantaneous Forward Current (iF) – Amps

Figure 2: Power Dissipation vs. RMS On-State

Current (Typical)

0246810121

Single pulse rectiﬁcation

60Hz sine wave

Dxx25L

Dxx20L

Dxx15L

Average Forward Current [IF(AV )] - Amps

Average Forward Power Dissipation

[PF(AV)] - (Watts)

349

Revised: November 1, 2010 05:04 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

15 / 20 / 25 Amp Rectiﬁers

Dxx15L & Dxx20L & Dxx25L Series

100

105

110

115

120

125

130

024681012141

CURRENT WAVEFORM: Sinusoidal

LOAD: Resistive or Inductive

CONDUCTION ANGLE: 180°

Dxx25L

Dxx20L

Dxx15L

Average Forward Current [IF(AV E)] - Amps

Maximum Allowable Case

Temperature (TC) - °C

Figure 3: Maximum Allowable Case Temperature vs.

Average On-State Current

Figure 4: Surge Peak On-State Current vs.

Number of Cycles

Note: xx = voltage

100

1000

110100 1000

Surge Current Duration -- Full Cycles

Dxx15L

Dxx25L

Dxx20L

Peak Surge (Non-repetitive)

Forward Current (IFSM) – Amps

Supply Frequency: 60Hz Sinusoidal

Load: Resistive

RMS Forward Current : [IT(RMS)]: Maximum Rated

Value at Speciﬁc Case Temperature

Soldering Parameters

Reﬂow Condition Pb – Free assembly

Pre Heat

- Temperature Min (Ts(min))150°C

- Temperature Max (Ts(max))200°C

- Time (min to max) (ts)60 – 180 secs

Average ramp up rate (Liquidus Temp)

(TL) to peak 5°C/second max

TS(max) to TL - Ramp-up Rate 5°C/second max

Reﬂow - Temperature (TL) (Liquidus) 217°C

- Temperature (tL)60 – 150 seconds

Peak Temperature (TP)260°C +0/-5

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 5°C/second max

Time 25°C to peak Temperature (TP)8 minutes Max.

Do not exceed 280°C

Time

Temperature

TS(max)

TS(min)

time to peak temperature

Preheat

eat

Ramp-upRamp-up

Ramp-down

350

Revised: November 1, 2010 05:04 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

15 / 20 / 25 Amp Rectiﬁers

Dxx15L & Dxx20L & Dxx25L Series

Environmental Speciﬁcations

Test Speciﬁcations and Conditions

High Temperature

Voltage Blocking

MIL-STD-750: Method 1040, Condition A

Rated VRRM, 125°C, 1008 hours

Temperature Cycling

MIL-STD-750: Method 1051

-40°C to 150°C, 15-minute dwell,

100 cycles

Biased Temperature &

Humidity

EIA/JEDEC: JESD22-A101

320VDC, 85°C, 85%RH, 1008 hours

High Temp Storage MIL-STD-750: Method 1031

150°C, 1008 hours

Low-Temp Storage 1008 hours; -40°C

Thermal Shock

MIL-STD-750: Method 1056

0°C to 100°C, 5-minute dwell,

10-second transfer, 10 cycles

Autoclave

(Pressure Cooker Test)

EIA/JEDEC: JESD22-A102

121°C, 100%RH, 2atm, 168 hours

Resistance to

Solder Heat

MIL-STD-750: Method 2031

260°C, 10 seconds

Solderability ANSI/J-STD-002, Category 3, Test A

Lead Bend MIL-STD-750: Method 2036, Condition E

Physical Speciﬁcations

Terminal Finish 100% Matte Tin Plated

Body Material UL recognized epoxy meeting ﬂammability

classiﬁcation 94V-0

Lead Material Copper Alloy

Design Considerations

Careful selection of the correct device for the application’s

operating parameters and environment will go a long way

toward extending the operating life of the rectier. Good

design practice should limit the maximum continuous

current through the main terminals to 75% of the device

rating. Other ways to ensure long life for a power discrete

semiconductor are proper heat sinking and selection of

voltage ratings for worst case conditions. Overheating,

overvoltage (including dv/dt), and surge currents are

the main killers of semiconductors. Correct mounting,

soldering, and forming of the leads also help protect

against component damage.

Dimensions — TO-220AB (L-Package) — Isolated Mounting Tab

Dimension Inches Millimeters

Min Max Min Max

A 0.380 0.420 9.65 10.67

B 0.105 0.115 2.67 2.92

C 0.230 0.250 5.84 6.35

D 0.590 0.620 14.99 15.75

E 0.142 0.147 3.61 3.73

F 0.110 0.130 2.79 3.30

G0.540 0.575 13.72 14.61

H 0.025 0.035 0.64 0.89

J 0.195 0.205 4.95 5.21

K 0.095 0.105 2.41 2.67

L 0.060 0.075 1.52 1.91

M 0.085 0.095 2.16 2.41

N 0.018 0.024 0.46 0.61

O 0.178 0.188 4.52 4.78

P 0.045 0.060 1. 14 1.52

R 0.038 0.048 0.97 1.22

MEASURING POINT AREA (REF.) 0.17 IN

.320

8.13

.526

13.36

.276

7. 01

Not Used

CATHODE ANODE

Note: Maximum torque to

be applied to mounting tab

is 8 in-lbs. (0.904 Nm).

351

Revised: November 1, 2010 05:04 PM

Teccor® brand Thyristors

Speciﬁcations are subject to change without notice.

Please refer to http://www.littelfuse.com for current information.

15 / 20 / 25 Amp Rectiﬁers

Dxx15L & Dxx20L & Dxx25L Series

Packing Options

Part Number Marking Weight Packing Mode Base Quantity

Dxx15L Dxx15L 2.2 g Bulk 500

Dxx15LTP Dxx15L 2.2 g Tube 500 (50 per tube)

Dxx20L Dxx20L 2.2 g Bulk 500

Dxx20LTP Dxx20L 2.2 g Tube 500 (50 per tube)

Dxx25L Dxx25L 2.2 g Bulk 500

Dxx25LTP Dxx25L 2.2 g Tube 500 (50 per tube)

Note: xx = Voltage

Product Selector

Part Number

Voltage

Type Package

400V 600V 800V 1000V

Dxx15L X X X X Rectiﬁer TO-220L

Dxx20L X X X X Rectiﬁer TO-220L

Dxx25L X X X X Rectiﬁer TO-220L

Note: xx = Voltage

Part Marking SystemPart Numbering System

D60 15 L59

DEVICE TYPE

D: Rectiﬁer

VOLTAGE RATING

40: 400V

60: 600V

80: 800V

K0: 1000V

CURRENT RATING

15: 15A

20: 20A

25: 25A

PACKAGE TYPE

L: TO-220 (Isolated)

LEAD FORM DIMENSIONS

xx: Lead Form Option

D6015L

TO-220AB (L Package)

AK not

used