STDP8028 Single-chip enhanced monitor controller Data brief Features Applications Dual 10-bit triple ADCs with capture up to 205 MHz Integrated dual digital inputs supporting HDMI 1.3 receiver Integrated DisplayPort 1.1 compliant receiver Integrated 3D video decoder Next generation true 10-bit Faroudja DCDi Cinema(R) format processing Flexible DDR2 memory interface 32 bits wide Advanced Picture-in-Picture (PIP) features capabilities Faroudja RealColor(R) processing On-chip microprocessor Advanced bit-mapped OSD controller Embedded 10-bit dual-channel LVDS for WUXGA panel support Multi-standard digital and analog audio decoder and post-processor Package: 409 HSBGA DDR2 Multimedia monitors Flash 3 Analog RGB Inputs HDMI Input DVI Input STDP8028 LVDS DisplayPort Input I2S Keypad & LED I2S/ DSD/ SPDIF Column Driver Row Driver Audio L/R In, SPDIF In LVDS TCON Rx 16 Configurable Analog Inputs LCD Panel Audio Amp May 2009 Doc ID 15729 Rev 1 For further information contact your local STMicroelectronics sales office. 1/8 www.st.com 8 Description 1 STDP8028 Description The STDP8028 IC is an innovative System-on-Chip (SoC) controller designed for multimedia monitors and emerging digital display applications. This IC provides a complete multimedia LCD monitor solution chassis supporting worldwide video and audio standards where exceptional quality is required. The STDP8028 proficiently handles video and computer graphics inputs up to WUXGA resolutions. The output port delivers unparalleled image quality and supports display resolutions of up to WUXGA as well. Its rich feature set, high level of integration, and sophisticated implemented technologies for color management, scaling, video processing (Faroudja DCDi Cinema), and audio processing make STDP8028 the ideal answer for a high-quality, cost-effective, integrated multimedia monitor solution. 2/8 Doc ID 15729 Rev 1 STDP8028 2 Benefits Benefits Complete SoC solution with exceptional video and audio quality Integrated DisplayPort (DP) 1.1receiver/HDMI 1.3 receiver/ DVI 1.0 Rx with integrated HDCP key Integrated multi-standard worldwide 3D video decoder Superior video quality with Faroudja DCDi Cinema technology Multi-standard worldwide analog/digital audio decoder and post-processor Full HD video capability up to 1080p in/out support Additional integration of full audio processing, DPMS mode, UARTs, LBADC, 3D-VD, and more to reduce the system BOM costs Doc ID 15729 Rev 1 3/8 Feature attributes 3 Feature attributes Flexible digital and analog capture - 19 configurable analog inputs - Integrated dual 10-bit triple ADCs with capture up to 205 MHz - Input resolution support up to UXGA@75 Hz/WUXGA@60 Hz - Composite-Sync and Sync-on-Green (SOG) support - Instant AutoTM for automatic phase and clock adjustment - 2 CVBS out support - 4:4:4/4:2:2/CCIR656/601 30/24/16/8-bit digital input port Integrated HDMI 1.3 receiver - Integrated multi-mode HDMI 1.3 receiver - Front-end multiplexer supports two physical input ports - 1080p HDMI capture support - HDCP 1.2 content protection with integrated key storage (not supporting Enhanced Verification Link and Advanced Cipher) - xvYCC support based on IEC61966-2-4 color standard - Deep color and wide gamut support: 12-bit HDMI input at YCC 4:4:4 Integrated 3D video decoder - Supports all broadcast TV video standards--NTSC (North America and Japan), PAL (I, B, G, H, M, D, N), and SECAM (D, K, L, B, G) - Single 3D adaptive comb filter for luma-chroma separation for NTSC (North America and Japan) and PAL (I, B, G, H, M, D, N) - Supports Composite, S-Video, and Component SD and HD video input signals - Supports NTSC443 and PAL-60 playback video standards - MacrovisionTM and VCR trick mode support Integrated DisplayPort 1.1 receiver - DisplayPort interconnectivity provides very high bandwidth compared to conventional digital interfaces, such as HDMI, DVI, and LVDS - Low cost interface with fewer signal lines, inexpensive cables and connectors, and low EMI - DisplayPort link comprising 4 main lines and 1 auxiliary channel - WUXGA capture support Integrated audio processing - 5 stereo (L/R) analog inputs, 1 mono (MIC) input - Additional and separate audio inputs for HDMI, I2S, SIF, and SPDIF - Outputs include 5 analog DACs, SPDIF, I2S, DSD, and 2 L/R - Worldwide multi-standard audio support - Integrated I2S audio delay for exact audio and video synchronization - Supports 5.1 analog/digital output stream (left, center, right, LS, RS + LFE) Faroudja RealColor - 4/8 STDP8028 Faroudja RealColor provides true 10-bit color processing Doc ID 15729 Rev 1 STDP8028 Feature attributes - Advanced Color Management with overlapping regions allows for flexible fleshtone compensation, blue stretch, color regions detection, and other image enhancements - Advanced Contrast Control delivers smoother, more realistic gradients and ensures that full dynamic range is used in video content - Patented QuickMatch technology produces uniform color responses for different panels using flexible and programmable techniques - Integrated noise filter to eliminate contrast noise Faroudja DCDi Cinema format conversion - Low angle de-interlacing processing - Per pixel Motion Adaptive De-interlacing (MADi) up to 1080i format - Format conversion up to 1080p resolutions - Adaptive 3D/TNR noise reduction Picture-in-Picture (PIP) - Programmable PIP channel horizontal and vertical filter coefficients - Flexible PIP, PBP, and POP support capability (video, graphics) - DCDi Edge(R) processing for second channel window Faroudja TrueLife video enhancer - High performance programmable sharpening filters with noise coring - Programmable main channel horizontal and vertical filter coefficients - Non-linear chroma and luma enhancement DDR2 memory controller - DDR2 memory I/F support - Supports 16/32-bit memory I/F 1x16, 2x16, 1x32, 2x32 On-chip microprocessor and OSD controller - Integrated x186-based microprocessor with rich function library - General Purpose Inputs/Outputs (GPIOs) available for managing system devices (keypad, backlight, NVRAM, etc.) - 2-wire serial master bus interface for external device control - Integrated I/R decoder and 4-channel low bandwidth ADC - Advanced bit-mapped OSD controller Output formats - Dual-channel/single-channel 18/24/30-bit LVDS transmitters for direct connection to LCD modules (applicable to STDP8028 only) - Single-channel 24/30-bit TTL output - Adaptive Contrast Ratio (ACR) control for automatic, intelligent backlight adjustments Doc ID 15729 Rev 1 5/8 Ordering information 4 STDP8028 Ordering information Table 1. Order codes Part number STDP8028-AB Description 409-ball HSBGA In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 6/8 Doc ID 15729 Rev 1 STDP8028 5 Revision history Revision history Table 2. Document revision history Date Revision 28-Apr-2009 1 Initial release. 2 Updated features section to specify "receiver" when referring to integrated HMDI 1.3 feature. Changed HDCP version from 1.3 to 1.2 and added "not supporting Enhanced Verification Link and Advanced Cipher." Added the word "integrated" to feature heading "DisplayPort 1.1receiver". 15-May-2009 Changes Doc ID 15729 Rev 1 7/8 STDP8028 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 15729 Rev 1