Data brief
For further information contact your local STMicroelectronics sales office.
May 2009 Doc ID 15729 Rev 1 1/8
8
STDP8028
Single-chip enhanced monitor controller
Features
■Dual 10-bit triple ADCs with capture up to
205 MHz
■Integrated dual digital inputs supporting
HDMI 1.3 receiver
■Integrated DisplayPort 1.1 compliant receiver
■Integrated 3D video decoder
■Next generation true 10-bit Faroudja DCDi
Cinema® format processing
■Flexible DDR2 memory interface 32 bits wide
■Advanced Picture-in-Picture (PIP) features
capabilities
■Faroudja RealColor® processing
■On-chip microprocessor
■Advanced bit-mapped OSD controller
■Embedded 10-bit dual-channel LVDS for
WUXGA panel support
■Multi-standard digital and analog audio
decoder and post-processor
■Package: 409 HSBGA
Applications
■Multimedia monitors
STDP8028
LCD Panel
DDR2 Flash
16 Configurable
Analog Inputs
Row Driver
I2S
Audio L/R In, SPDIF In
HDMI Input
DVI Input
DisplayPort Input
Keypad & LED
Audio Amp
I2S/
DSD/
SPDIF
LVDS
LVDS TCON Rx
Column Driver
3 Analog RGB Inputs
www.st.com
Description STDP8028
2/8 Doc ID 15729 Rev 1
1 Description
The STDP8028 IC is an innovative System-on-Chip (SoC) controller designed for
multimedia monitors and emerging digital display applications.
This IC provides a complete multimedia LCD monitor solution chassis supporting worldwide
video and audio standards where exceptional quality is required.
The STDP8028 proficiently handles video and computer graphics inputs up to WUXGA
resolutions. The output port delivers unparalleled image quality and supports display
resolutions of up to WUXGA as well. Its rich feature set, high level of integration, and
sophisticated implemented technologies for color management, scaling, video processing
(Faroudja DCDi Cinema), and audio processing make STDP8028 the ideal answer for a
high-quality, cost-effective, integrated multimedia monitor solution.
STDP8028 Benefits
Doc ID 15729 Rev 1 3/8
2 Benefits
●Complete SoC solution with exceptional video and audio quality
●Integrated DisplayPort (DP) 1.1receiver/HDMI 1.3 receiver/
DVI 1.0 Rx with integrated HDCP key
●Integrated multi-standard worldwide 3D video decoder
●Superior video quality with Faroudja DCDi Cinema technology
●Multi-standard worldwide analog/digital audio decoder and post-processor
●Full HD video capability up to 1080p in/out support
●Additional integration of full audio processing, DPMS mode, UARTs, LBADC, 3D-VD,
and more to reduce the system BOM costs
Feature attributes STDP8028
4/8 Doc ID 15729 Rev 1
3 Feature attributes
●Flexible digital and analog capture
– 19 configurable analog inputs
– Integrated dual 10-bit triple ADCs with capture up to 205 MHz
– Input resolution support up to UXGA@75 Hz/WUXGA@60 Hz
– Composite-Sync and Sync-on-Green (SOG) support
– Instant Auto™ for automatic phase and clock adjustment
– 2 CVBS out support
– 4:4:4/4:2:2/CCIR656/601 30/24/16/8-bit digital input port
●Integrated HDMI 1.3 receiver
– Integrated multi-mode HDMI 1.3 receiver
– Front-end multiplexer supports two physical input ports
– 1080p HDMI capture support
– HDCP 1.2 content protection with integrated key storage (not supporting
Enhanced Verification Link and Advanced Cipher)
– xvYCC support based on IEC61966-2-4 color standard
– Deep color and wide gamut support: 12-bit HDMI input at YCC 4:4:4
●Integrated 3D video decoder
– Supports all broadcast TV video standards—NTSC (North America and Japan),
PAL (I, B, G, H, M, D, N), and SECAM (D, K, L, B, G)
– Single 3D adaptive comb filter for luma–chroma separation for NTSC (North
America and Japan) and PAL (I, B, G, H, M, D, N)
– Supports Composite, S-Video, and Component SD and HD video input signals
– Supports NTSC443 and PAL-60 playback video standards
– Macrovision™ and VCR trick mode support
●Integrated DisplayPort 1.1 receiver
– DisplayPort interconnectivity provides very high bandwidth compared to
conventional digital interfaces, such as HDMI, DVI, and LVDS
– Low cost interface with fewer signal lines, inexpensive cables and connectors, and
low EMI
– DisplayPort link comprising 4 main lines and 1 auxiliary channel
– WUXGA capture support
●Integrated audio processing
– 5 stereo (L/R) analog inputs, 1 mono (MIC) input
– Additional and separate audio inputs for HDMI, I2S, SIF, and SPDIF
– Outputs include 5 analog DACs, SPDIF, I2S, DSD, and 2 L/R
– Worldwide multi-standard audio support
– Integrated I2S audio delay for exact audio and video synchronization
– Supports 5.1 analog/digital output stream (left, center, right, LS, RS + LFE)
●Faroudja RealColor
– Faroudja RealColor provides true 10-bit color processing
STDP8028 Feature attributes
Doc ID 15729 Rev 1 5/8
– Advanced Color Management with overlapping regions allows for flexible flesh-
tone compensation, blue stretch, color regions detection, and other image
enhancements
– Advanced Contrast Control delivers smoother, more realistic gradients and
ensures that full dynamic range is used in video content
– Patented QuickMatch technology produces uniform color responses for different
panels using flexible and programmable techniques
– Integrated noise filter to eliminate contrast noise
●Faroudja DCDi Cinema format conversion
– Low angle de-interlacing processing
– Per pixel Motion Adaptive De-interlacing (MADi) up to 1080i format
– Format conversion up to 1080p resolutions
– Adaptive 3D/TNR noise reduction
●Picture-in-Picture (PIP)
– Programmable PIP channel horizontal and vertical filter coefficients
– Flexible PIP, PBP, and POP support capability (video, graphics)
– DCDi Edge® processing for second channel window
●Faroudja TrueLife video enhancer
– High performance programmable sharpening filters with noise coring
– Programmable main channel horizontal and vertical filter coefficients
– Non-linear chroma and luma enhancement
●DDR2 memory controller
– DDR2 memory I/F support
– Supports 16/32-bit memory I/F 1x16, 2x16, 1x32, 2x32
●On-chip microprocessor and OSD controller
– Integrated x186-based microprocessor with rich function library
– General Purpose Inputs/Outputs (GPIOs) available for managing system devices
(keypad, backlight, NVRAM, etc.)
– 2-wire serial master bus interface for external device control
– Integrated I/R decoder and 4-channel low bandwidth ADC
– Advanced bit-mapped OSD controller
●Output formats
– Dual-channel/single-channel 18/24/30-bit LVDS transmitters for direct connection
to LCD modules (applicable to STDP8028 only)
– Single-channel 24/30-bit TTL output
– Adaptive Contrast Ratio (ACR) control for automatic, intelligent backlight
adjustments
Ordering information STDP8028
6/8 Doc ID 15729 Rev 1
4 Ordering information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 1. Order codes
Part number Description
STDP8028-AB 409-ball HSBGA
STDP8028 Revision history
Doc ID 15729 Rev 1 7/8
5 Revision history
Table 2. Document revision history
Date Revision Changes
28-Apr-2009 1 Initial release.
15-May-2009 2
Updated features section to specify “receiver” when referring to
integrated HMDI 1.3 feature.
Changed HDCP version from 1.3 to 1.2 and added “not supporting
Enhanced Verification Link and Advanced Cipher.”
Added the word “integrated” to feature heading “DisplayPort
1.1receiver”.
STDP8028
8/8 Doc ID 15729 Rev 1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2009 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
