Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. NC7SV17 TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input Features Description 0.9V to 3.6V VCC Supply Operation Extremely High Speed tPD - 1.5ns: Typical for 2.7V to 3.6V VCC - 1.8ns: Typical for 2.3V to 2.7V VCC - 2.0ns: Typical for 1.65V to 1.95V VCC - 3.2ns: Typical for 1.4V to 1.6V VCC - 5.9ns: Typical for 1.1V to 1.3V VCC - 12.0ns: Typical for 0.9V VCC The NC7SV17 is a single buffer with Schmitt trigger input from Fairchild's Ultra-Low Power (ULP-A) Series (R) of TinyLogic . ULP-A is ideal for applications that require extreme high speed, high drive, and low power. This product is designed for a wide low-voltage operating range (0.9V to 3.6V VCC) and applications that (R) require more drive and speed than the TinyLogic ULP series, but still offer best-in-class, low-power operation. 3.6V Over-Voltage Tolerant I/Os at VCC from 0.9V to 3.6V The NC7SV17 is uniquely designed for optimized power and speed and is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation. Power-Off High-Impedance Inputs and Outputs High Static Drive (IOH/IOL) - 24mA at 3.00V VCC - 18mA at 2.30V VCC - 6mA at 1.65V VCC - 4mA at 1.4V VCC - 2mA at 1.1V VCC - 0.1mA at 0.9V VCC Uses Proprietary Quiet SeriesTM Noise/EMI Reduction Circuitry Ultra-Small MicroPakTM Packages Ultra-Low Dynamic Power Ordering Information Part Number Top Mark Package Packing Method NC7SV17P5X V17 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & Reel NC7SV17L6X G5 6-Lead MicroPakTM, 1.00mm Wide 5000 Units on Tape & Reel NC7SV17FHX G5 6-Lead, MicroPak2TM, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel TinyLogic(R) is a registered trademark of Fairchild Semiconductor Corporation. MicroPakTM and Quiet SeriesTM are trademarks of Fairchild Semiconductor Corporation. (c) 2018 ON Semiconductor Corporation NC7SV17 * Rev. 2 www.onsemi.com NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input March 2018 700 600 ULP (SP) 500 Battery Life 400 (Days) 300 200 100 0 ULP-A (SV) UHS (SZ) 0.9 1.2 1.5 1.8 2.5 3.3 VCC Supply Voltage 5.0 Figure 1. Battery Life vs. VCC Supply Voltage Notes: (R) 1. TinyLogic ULP and ULP-A with up to 50% less power consumption can extend battery life significantly. Battery Life = (Vbattery*Ibattery*.9)/(Pdevice)/24hrs/day where, Pdevice = (ICC * VCC) + (CPD + CL) * VCC2 * f. 2. Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with CL=15pF load. Connection Diagram IEEE/IEC A 1 Y Figure 2. Logic Symbol www.onsemi.com 2 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input Battery Life NC 1 A 2 GND 3 5 4 VCC Y Figure 3. SC70 (Top View) NC 1 6 VCC A 2 5 NC GND 3 4 Y Figure 4. MicroPakTM (Top Through View) Pin Definitions Pin # SC70 Pin # MicroPak Name Description 1 1 NC 2 2 A 3 3 GND 4 4 Y 5 6 VCC Supply Voltage 5 NC No Connect No Connect Input Ground Output Function Table Inputs Output A Y L L H H H=HIGH Logic Level L=LOW Logic Level www.onsemi.com 3 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input Pin Configurations Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 4.6 V VIN DC Input Voltage -0.5 4.6 V -0.5 VCC + 0.5 -0.5 4.6 VOUT IIK DC Input Diode Current IOK DC Output Diode Current IOH/IOL ICC or IGND TSTG HIGH or LOW State DC Output Voltage (3) VCC=0V VIN < 0V -50 VOUT < 0V -50 VOUT > VCC +50 V mA mA DC Output Source/Sink Current 50 mA DC VCC or Ground Current per Supply Pin 50 mA +150 C TJ Storage Temperature Range Junction Temperature Under Bias -65 +150 C TL Junction Lead Temperature, Soldering 10 Seconds +260 C SC70-5 PD ESD Power Dissipation at +85C 150 MicroPakTM-6 130 MicroPak2TM-6 120 Human Body Model, JEDEC:JESD22-A114 4000 Charge Device Model, JEDEC:JESD22-C101 2000 mW V Note: 3. IO absolute maximum rating must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter VCC Supply Voltage VIN Input Voltage VOUT IOH/IOL Output Voltage Output Current in IOH/IOL Conditions Min. Max. Unit 0.9 3.6 V V 0 3.6 VCC=0V 0 3.6 HIGH or LOW State 0 VCC VCC=3.0V to 3.6V 24 VCC=2.3V to 3.6V 18 VCC=1.65V to 1.95V 6 VCC=1.4V to 1.6V 4 VCC=1.1V to 1.3V t/V JA Operating Temperature, Free Air Minimum Input Edge Rate Thermal Resistance mA 2 VCC=0.9V TA V 0.1 -40 +85 C VIN=0.8V to 2.0, VCC=3.0V 10 ns/V SC70-5 425 MicroPakTM-6 500 MicroPak2TM-6 560 C/W Note: 4. Unused inputs must be held HIGH or LOW. They may not float. www.onsemi.com 4 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input Absolute Maximum Ratings Symbol VP VN VH Parameter Positive Threshold Voltage Negative Threshold Voltage Hysteresis Voltage VCC Conditions Min. Min. 0.30 0.70 0.30 0.70 0.40 1.00 0.40 1.00 1.40 0.50 1.25 0.50 1.40 1.65 0.70 1.50 0.70 1.50 2.30 1.00 1.80 1.00 1.80 2.70 1.50 2.20 1.50 2.20 0.90 0.10 0.60 0.10 0.60 1.10 0.15 0.70 0.15 0.70 1.40 0.20 0.80 0.20 0.80 1.65 0.25 0.90 0.25 0.90 2.30 0.40 1.15 0.40 1.15 2.70 0.60 1.50 0.60 1.50 0.90 0.07 0.50 0.07 0.50 1.10 0.08 0.60 0.08 0.60 1.40 0.09 0.80 0.09 0.80 1.65 0.15 1.00 0.15 1.00 2.30 0.25 1.10 0.25 1.10 2.70 0.60 1.20 0.60 1.20 0.90 VCC-0.1 VCC-0.1 1.10 VCC 1.30 VCC-0.1 VCC-0.1 VCC-0.2 VCC-0.2 VCC-0.2 VCC-0.2 VCC-0.2 VCC-0.2 IOH=-100A 2.30 VCC 2.70 2.70 VCC 3.60 VCC-0.2 VCC-0.2 1.10 VCC 1.30 IOH=-2mA .75 x VCC .75 x VCC 1.40 VCC 1.60 IOH=-4mA .75 x VCC .75 x VCC 1.65 VCC 1.95 IOH=-6mA 1.25 1.25 2.0 2.0 1.8 1.8 2.2 2.2 IOH=-18mA 1.7 1.7 2.4 2.4 IOH=-24mA 2.2 2.2 2.30 VCC 2.70 2.30 VCC 2.70 IOH=-12mA 2.70 VCC 3.60 2.30 VCC 2.70 2.70 VCC 3.60 2.70 VCC 3.60 Units Max. 0.90 1.65 VCC 1.95 HIGH Level Output Voltage Max. TA=-40 to 85C 1.10 1.40 VCC 1.60 VOH TA=25C V V V V Continued on following page... www.onsemi.com 5 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input DC Electrical Characteristics Symbol Parameter VCC LOW Level Output Voltage Min. Max. 1.10 VCC 1.30 0.10 0.10 1.40 VCC 1.60 0.20 0.20 0.20 0.20 2.30 VCC 2.70 0.20 0.20 2.70 VCC 3.60 0.20 0.20 1.10 VCC 1.30 IOL=2mA 0.25 x VCC 0.25 x VCC 1.40 VCC 1.60 IOL=4mA 0.25 x VCC 0.25 x VCC 1.65 VCC 1.95 IOL=6mA 0.30 0.30 2.30 VCC 2.70 0.40 0.40 0.40 0.40 0.60 0.60 0.40 0.40 0.55 0.55 0 VIN 3.60 0.1 0.5 A 0 (VIN, vO) 3.60 0.5 0.5 A VIN=VCC, or GND 0.9 0.9 2.30 VCC 2.70 IOL=100A IOL=12mA IOL=18mA 2.70 VCC 3.60 IOL=24mA IOFF Power Off Leakage Current ICC Quiescent Supply Current Units Max. 0.10 2.70 VCC 3.60 IIN Min. 0.10 2.70 VCC 3.60 Input Leakage Current TA=-40 to 85C 0.90 1.65 VCC 1.95 VOL TA=25C Conditions 0.90 to 3.60 0 0.90 to 3.60 VCC VIN 3.6V 0.9 V A AC Electrical Characteristics Symbol Parameter VCC 0.90 1.10 VCC 1.30 tPHL, tPLH Propagation Delay 1.40 VCC 1.60 TA=25C Conditions Min. CL=15pF, RL=1M 2.70 VCC 3.60 CIN Input Capacitance 0 CPD Power Dissipation Capacitance 0.90 to 3.60 Max. Min. Max. Units Figure ns Figure 5 Figure 6 12 CL=15pF, RL=2k 1.65 VCC 1.95 2.30 VCC 2.70 Typ. TA=-40 to 85C CL=30pF, RL=500 VIN=0V or VCC, f=10MHz 2.0 5.9 10.0 1.0 14.9 1.0 3.2 6.1 0.9 7.0 1.0 2.0 5.2 0.7 6.2 0.8 1.8 3.7 0.6 4.4 0.7 1.5 3.3 0.5 3.8 2 pF 10 pF www.onsemi.com 6 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input DC Electrical Characteristics (Continued) NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input AC Loadings and Waveforms VCC TEST SIGNAL DUT CL pF RL Figure 5. AC Test Circuit Figure 6. AC Waveforms VCC Symbol 3.3V 0.3V 2.5V 0.2V 1.8V 0.15V 1.5V 0.1V 1.2V 0.1V 0.9V Vmi 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 Vmo 1.5V VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 www.onsemi.com 7 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input Physical Dimensions Figure 7. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf. Package Designator P5X Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 3000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.onsemi.com 8 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C (0.254) (0.49) 5X 1.00 (0.75) PIN 1 IDENTIFIER 5 (0.52) 1X A TOP VIEW 0.55MAX (0.30) 6X PIN 1 0.05 C 0.05 0.00 RECOMMENED LAND PATTERN 0.05 C C 0.25 0.15 6X 1.0 DETAIL A 0.10 0.05 0.45 0.35 0.10 0.00 6X C B A C 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 0.5 (0.05) 6X BOTTOM VIEW DETAIL A PIN 1 TERMINAL 0.075 X 45 CHAMFER (0.13) 4X Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 4. FILENAME AND REVISION: MAC06AREV4 5. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY OTHER LINE IN THE MARK CODE LAYOUT. Figure 8. 6-Lead, MicroPakTM, 1.0mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf. Package Designator L6X Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.onsemi.com 9 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input Physical Dimensions 0.89 0.35 0.05 C 1.00 2X B A 5X 0.40 PIN 1 MIN 250uM 0.66 1.00 1X 0.45 6X 0.19 0.05 C TOP VIEW RECOMMENDED LAND PATTERN FOR SPACE CONSTRAINED PCB 2X 0.90 0.05 C 0.35 0.55MAX C 5X 0.52 SIDE VIEW 0.73 (0.08) 4X 1 DETAIL A 2 1X 0.57 0.09 0.19 6X 3 0.20 6X ALTERNATIVE LAND PATTERN FOR UNIVERSAL APPLICATION (0.05) 6X 5X 0.35 0.25 6 5 4 0.35 0.60 (0.08) 4X 0.10 .05 C C B A 0.40 0.30 BOTTOM VIEW NOTES: A. COMPLIES TO JEDEC MO-252 STANDARD B. DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994 D. LANDPATTERN RECOMMENDATION IS BASED ON FSC DESIGN. E. DRAWING FILENAME AND REVISION: MGF06AREV3 0.075X45 CHAMFER DETAIL A PIN 1 LEAD SCALE: 2X Figure 9. 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. Tape and Reel Specification Please visit Fairchild Semiconductor's online packaging area for the most recent tape and reel specifications: http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf. Package Designator FHX Tape Section Cavity Number Cavity Status Cover Type Status Leader (Start End) 125 (Typical) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (Typical) Empty Sealed www.onsemi.com 10 NC7SV17 -- TinyLogic(R) ULP-A Single Buffer with Schmitt Trigger Input 11 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com