SCHOTTKY BARRIER RECTIFIER
VOLTAGE RANGE 20 to 200 Volts CURRENT 16.0 Ampere
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SR16200C
THRU
SR1620C
TO-220
Dimensions in inches and (millimeters)
.153 (3.9)
.413 (10.5)
.108
.051
.374 (9.5)
( 2.75 )
( 1.3 )
.148 (3.8 )
.053 (1.3)
.047 (1.2)
.270 (6.9)
.610 (15.5)
.583 (14.8)
.102 (2.6)
.091 (2.3)
.583 (14.8)
.157
.126
( 4.0 )
( 3.2 )
.531 ( 13.5 )
.028 (0.7)
.012 (0.3)
.230 (5.8)
.187 (4.7 )
.146 (3.7)
.035 (0.9)
.028 (0.7)
PIN
123
PIN 1
PIN 3 HEATSINK
PIN 2
FEATURES
* Low switching noise
* Low forward voltage drop
* Low thermal resistance
* High current capability
* High switching capability
* High surge capabitity
* High reliability
MECHANICAL DATA
* Case: To-220 molded plastic
* Epoxy: Device has UL flammability classification 94V-O
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
* Weight: 2.24 grams
MAXIMUM RATINGS
(@ TA=25
OC unless otherwise noted)
ELECTRICAL CHARACTERISTICS
(@TA=25
OC unless otherwise noted)
RATINGS
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at Derating Case Temperature
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
Typical Thermal Resistance (Note 1)
Typical Junction Capacitance (Note 3)
SYMBOL
V
RRM
V
DC
I
FSM
C
J
T
STG
V
RMS
UNITS
Volts
Volts
Volts
Amps16.0
150
2.0
40
700
Amps
0
C/W
0
C
Storage Temperature Range
Rq
JC
Rq
JA
I
O
pF
Operating Temperature Range T
J
SR1620C
20
150
-55 to + 150
0
C
SR1635CSR1630C SR1640C SR1645C SR1650C SR1660C
30 35 40 45 50 60
14 21 25 28 32 35 42
20 30 35 40 45 50 60
SR1680C SR16100C SR16150C SR16200C
SR1620C SR1635CSR1630C SR1640C SR1645C SR1650C SR1660C SR1680C SR16100C SR16150C SR16200C
80 100 150 200
80 100 150 200
56 70 105 140
500
NOTES : 1. Thermal Resistance : Heat-sink mounted.
2. Suffix “A” = Common Anode.
3. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
4. "Fully ROHS compliant", "100% Sn plating (Pb-free)".
2008-11
REV: A
CHARACTERISTICS
Maximum Average Reverse Current
at Rated DC Blocking Voltage
V
F
SYMBOL
I
R
mA
Maximum Instantaneous Forward Voltage at 8.0A DC Volts
0.2
2
@T
A
= 25
o
C
@T
A
= 100
o
C
.65
mA
UNITS
.75 .85
PERCENT OF RATED PEAK REVERSE VOLTAGE, (%)
INSTANTANEOUS FORWARD VOLTAGE, (V)
INSTANTANEOUS FORWARD CURRENT, (mA)
CASE TEMPERATURE, (OC)
0
0.01
0.001
0.1
1.0
10
AVERAGE FORWARD CURRENT, (A)
CJ, JUNCTION CAPACITANCE, (nF)
0
4
8
12
16
20
24
20 40 60 80 100 120 140
150100500
0 0.2 0.4 0.8 1.0 1.4 1.6
0.1
1.0
10
50
1.20.6 1.8
RATING AND CHARACTERISTICS CURVES ( SR1620C THRU SR16200C )
FIG.3 TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
FIG.1 TYPICAL FORWARD CURRENT
DERATING CURVE
FIG.2 TYPICAL REVERSE
CHARACTERISTICS
REVERSE VOLTAGE, (V)
INSTANTANEOUS REVERSE CURRENT, (A)
0.1
0.1
0.8
0.6
0.4
0.2
1
2
4
400.4 1.0 4 10 80 100
FIG.4 TYPICAL JUNCTION CAPACITANCE
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT, (A)
1
125
150
25
0
50
100
75
2 5 10 20 50 100
FIG.5 MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Single Phase Half Wave
60Hz Inductive or
Resistive Load
T
A
= 25 OC
8.3mS Single Half Sine-Wave
JEDEC Method
T
J
= 25 OC
Pulse width=300mS
1% Duty Cycle
SR1680C
~
SR16200C
SR1620C
~
SR1640C
SR1650C
~
SR1660C
SR1620C
~
SR1640C
SR1650C
~
SR16200C
SR1620C
~
SR1640C
SR1650C~SR1660C
SR1680C~SR16200C
T
J
= 25 OC
SR1620C
~
SR1645C
SR1650C
~
SR16200C
T
A
= 125 OC
T
A
= 25 OC
T
A
= 75 OC
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE