USB1T20 -- Universal Serial Bus Transceiver Features Description Complies with Universal Serial Bus Specification 2.0 for FS/LS Applications Utilizes Digital Inputs and Outputs to Transmit and Receive USB Cable Data Supports 12Mbit/s Full Speed (FS) and 1.5Mbit/s Low Speed (LS) Serial Data Transmission Supports Single-ended and Differential Data Interface as Function of MODE USB1T20 is a generic USB 2.0 compliant transceiver. Using a single voltage supply, the USB1T20 provides an ideal USB interface solution for any electronic device able to supply 3.0V to 3.6V. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus (USB). It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates. Single 3.3V Supply ESD Performance: Human Body Model - 9.5kV on D-, D+ Pins Only - 4.0kV on All Other Pins Packaged in industry-standard TSSOP package. The USB1T20 is ideal for mobile electronics and other space-constrained applications. Ordering Information Operating Temperature Range Eco Status USB1T20MTC -40 to +85C RoHS 14-Lead Thin Shrink Small Outline Package (TSSOP) JEDEC MO-153, 4.4mm Wide Tube USB1T20MTCX -40 to +85C RoHS 14-Lead Thin Shrink Small Outline Package (TSSOP) JEDEC MO-153, 4.4mm Wide Tape and Reel Part Number Packing Method Package For Fairchild's definition of "green" Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. D- /OE SPEED VMO/FSE0 D+ VPO RCV + - VP VM Figure 1. Logic Diagram (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 www.fairchildsemi.com USB1T20 -- Universal Serial Bus Transceiver October 2008 MODE 1 14 VCC /OE 2 13 VMO/FSEO RCV 3 12 VPO VP 4 11 D+ VM 5 10 D- SUSPND 6 9 SPEED GND 7 8 NC Figure 2. Pin Configuration (Top View) Pin Definitions Pin # Name I/O Description 1 MODE I Mode. When left unconnected, a weak pull-up transistor pulls mode pin to VCC and, in this GND, the VMO/FSEO pin takes the function of FSEO (force SEO). 2 /OE I Output Enable. Active LOW; enables the transceiver to transmit data on the bus. When not active, the transceiver is in receive mode. 3 RCV O Receive Data. CMOS-Level output for USB differential input. USB1T20 -- Universal Serial Bus Transceiver Pin Configuration Gated version of D- and D+. Outputs are logic "0" and logic "1." Used to detect single ended zero (/SEO), error conditions, and interconnected speed. (Input to SIE). 4, 5 VP,VM O 6 SUSPND I 7 GND 8 NC 9 SPEED I 10, 11 D-, D+ AI/O VP VM RESULT 0 0 /SEO 0 1 Low Speed 1 0 Full Speed 0 1 Error Suspend. Enables a low-power state while the USB bus is inactive. While the suspend pin is active, it drives the RCV pin to a logic "0" state. Both D+ and D- are 3state. Ground reference. No connect. Edge Rate Control. Logic "1" operates at edge rates for full speed. Logic "0" operates edge rates for low speed. Data+, Data-. Differential data bus conforming to the Universal Serial Bus standard. Inputs to differential driver. (Outputs from SIE.) Mode VPO 0 12, 13 VPO,VMO/FSEO I 1 14 VCC (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 VMO/FSEO RESULT 0 0 Logic "0" 0 1 /SEO 1 0 Logic "1" 1 1 /SEO 0 0 /SEO 0 1 Logic "0" 1 0 Logic "1" 1 1 Illegal Code 3.0 to 3.6 power supply. www.fairchildsemi.com 2 Input I/O Outputs Mode VPO VMO/FSEO /OE SUSPND D+ D- RCV VP VM Result 0 0 0 0 0 0 1 0 0 1 Logic "0" 0 0 1 0 0 0 0 Undefined State 0 0 /SEO 0 1 0 0 0 1 0 1 1 0 Logic "1" 0 1 1 0 0 0 0 Undefined State 0 0 /SEO 1 0 0 0 0 0 0 Undefined State 0 0 /SEO 1 0 1 0 0 0 1 0 0 1 Logic "0" 1 1 0 0 0 1 0 1 1 0 Logic "1" Undefined State Undefined State Illegal Code 1 1 1 0 0 1 1 Undefined State Don't Care Don't Care Don't Care 1 0 3-State 3-State Undefined State Undefined State Undefined State D+/DHi-Z Don't Care Don't Care Don't Care 1 1 3-State 3-State Undefined State Undefined State Undefined State D+/DHi-Z (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 USB1T20 -- Universal Serial Bus Transceiver Functional Truth Table www.fairchildsemi.com 3 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC Parameter DC Supply Voltage IIK DC Input Diode Current, VIN<0V VIN Input Voltage VI/O Input / Output Voltage IOK Output Diode Current, VO>VCC or VO<0 VO Output Voltage IO Output Source or Sink Current (VO = 0 to VCC) ICC / IGND TSTG (1) (1) Min. Max. Unit -0.5 7.0 V -50 mA -0.5 5.5 V -0.5 VCC + 0.5 V 50 mA -0.5 VCC + 0.5 V VP, VM, RCV Pins 15 D+/D- Pins 50 VCC / GND Current Storage Temperature Range -60 mA 100 mA +150 C Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. USB1T20 -- Universal Serial Bus Transceiver Absolute Maximum Ratings Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit 3.0 3.6 V VCC Supply Voltage VIN Input Voltage 0 5.5 V VAI/O Input Range for AI/0 0 VCC V VO Output Voltage 0 VCC V TA Operating Ambient Temperature, Free Air -40 +85 C (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 www.fairchildsemi.com 4 Over the recommended range of supply voltage and operating free air temperature unless otherwise noted. VCC = 3.0V to 3.6V. Symbol Parameter Conditions TA = -40 to +85C Min. Typ. Max. Units Input Levels VIL Low-Level Input Voltage VIH High-Level Input Voltage 0.8 2 V V Output Levels VOL Low-Level Output Voltage VOH High-Level Output Voltage IOL = 4mA 0.4 IOL = 20A 0.1 IOH = 4mA 2.4 IOH = 20A VCC-0.1 V V Leakage Current IIN Input Leakage Current VCC = 3.0 to 3.6V 5 A ICCFS Supply Current, Full Speed VCC = 3.0 to 3.6V 5 mA ICCLS Supply Current, Low Speed VCC = 3.0 to 3.6V 5 mA ICCQ Quiescent Supply Current VCC = 3.0 to 3.6V, VIN = VCC or GND 5 mA ICCS Supply Current in Suspend VCC = 3.0 to 3.6V, Mode = VCC 10 A USB1T20 -- Universal Serial Bus Transceiver DC Electrical Characteristics Digital Pins DC Electrical Characteristics D+/D- Pins Over the recommended range of supply voltage and operating free air temperature unless otherwise noted. VCC = 3.0V to 3.6V. Symbol Parameter Conditions TA=-40 to +85C Min. Typ. Max. Units Input Levels VDI Differential Input Sensitivity (D+) - (D-) VCM Differential Common-Mode Range Includes VDI Range VSE Single-Ended Receiver Threshold 0.2 V 0.8 2.5 V 0.8 2.0 V 0.3 V Output Levels VOL Static Output Low-Voltage RL of 1.5k to 3.6V VOH Static Output High-Voltage RL of 1.5k to GND VCR Differential Crossover 2.8 3.6 V 1.3 2.0 V 5 A 10 pF 10 % Leakage Current IOZ High Z-State Data Line Leakage Current 0V<VIN<3.3V Capacitance CIN Transceiver Capacitance Capacitance Match (2) Pin to GND (2) Output Resistance ZDRV Driver Output Resistance Resistance Match (3) Steady-State Drive (3) 4 20 10 % Notes: 2. This specification is guaranteed by design and statistical process distribution. 3. Excludes external resistor. To comply with USB specification 1.1, external series resistors of 24 1% each on D+ and D- are recommended. (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 www.fairchildsemi.com 5 Over the recommended range of supply voltage and operating free air temperature unless otherwise noted. VCC = 3.0V to 3.6V; CL = 50pF; RL = 1.5k on D+ to VCC. Symbol Parameter Conditions TA=-40 to +85C Min. Typ. Max. Units Driver Characteristics tR, tF Rise and Fall Time 10 and 90%, Figure 3 tRFM Rise/Fall Time Matching t r / tf VCRS Output Signal Crossover Voltage 4 20 ns 90 110 % 1.3 2.0 V Driver Timings Driver Propagation Delay (VPO,VMO/FSEO to D+D-) Figure 4 18 ns tPHZ, tPLZ Driver Disable Delay (/OE to D+/D-) Figure 6 13 ns tPZH, tPZL Driver Enable Delay (/OE to D+/D-) Figure 6 17 ns 16 ns 19 ns 8 ns tPLH Receiver Timings tPLH tPHL tPLH, tPHL Receiver Propagation Delay D+/D- to RVC Figure 5 Single-ended Receiver Delay (D+,D- to VP, VM) Figure 5 USB1T20 -- Universal Serial Bus Transceiver AC Electrical Characteristics D+/D- Pins, Full Speed AC Electrical Characteristics D+/D- Pins, Low Speed Over the recommended range of supply voltage and operating free air temperature unless otherwise noted. VCC = 3.0V to 3.6V; CL = 200pF to 600pF; RL = 1.5k on D- to VCC. Symbol Parameter Conditions TA=-40 to +85C Min. Typ. Max. Units Driver Characteristics tLR, tLF Rise and Fall Time 10 and 90%, Figure 3 75 300 ns tRFM Rise/Fall Time Matching t r / tf 80 120 % VCRS Output Signal Crossover Voltage 1.3 2.0 V 300 ns Driver Timings tPLH, tPHL Driver Propagation Delay (VPO,VMO/FSEO to D+D-) Figure 4 tPHZ, tPLZ Driver Disable Delay (/OE to D+/D-) Figure 6 13 ns tPZH, tPZL Driver Enable Delay (/OE to D+/D-) Figure 6 205 ns Receiver Timings tPLH, tPHL Receiver Propagation Delay (D+/D- to RVC) Figure 5 18 ns tPLH, tPHL Single-ended Receiver Delay (D+,D- to VP, VM) Figure 5 28 ns (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 www.fairchildsemi.com 6 VOL and VOH are the typical output voltage drops that occur with the output load. VCC never goes below 3.0V. Figure 3. Rise and Fall Times Figure 4. VPO, VMO/FSEO to D+/D- Figure 5. D+/D- to RCV, VP/VM Figure 6. /OE to D+/D- USB1T20 -- Universal Serial Bus Transceiver AC Loadings and Waveforms Test Circuits and Waveforms Figure 7. Load for VM/VP and RCV Figure 8. Load for Enable and Disable Times CL=50pF, Full Speed CL=200pF, Low Speed (Minimum Timing) CL=600pF, Low Speed (Maximum Timing) 1.5k on D- (Low Speed) or D+ (Full Speed) only Test S1 D-/LS Close D+/LS Open D-/FS Open D+/FS Close Figure 9. Load for D+/D- (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 www.fairchildsemi.com 7 USB1T20 -- Universal Serial Bus Transceiver Physical Dimensions 0.65 0.43 TYP 1.65 6.10 0.45 12.00TOP & BOTTOM R0.09 min A. CONFORMS TO JEDEC REGISTRATION MO-153, VARIATION AB, REF NOTE 6 B. DIMENSIONS ARE IN MILLIMETERS C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH, AND TIE BAR EXTRUSIONS D. DIMENSIONING AND TOLERANCES PER ANSI Y14.5M, 1982 E. LANDPATTERN STANDARD: SOP65P640X110-14M F. DRAWING FILE NAME: MTC14REV6 1.00 R0.09min Figure 10. 14-Lead Thin Shrink Small Outline Package (TSSOP) JEDEC MO-153, 4.4mm Wide Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 www.fairchildsemi.com 8 USB1T20 -- Universal Serial Bus Transceiver (c) 2004 Fairchild Semiconductor Corporation USB1T20 * Rev. 1.0.2 www.fairchildsemi.com 9