EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet Full Color Chip LED 15-23BSURSYGUBC/S530-A2/TR8 Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. Descriptions The 15-23B SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Automotive: backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Type Material Emitted Color SUR AlGaInP Hyper Red SYG AlGaInP Super Yellow Green UB GaN/SiC Blue Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Lens Color Water Clear Rev. 1.0 Page: 1 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Package Outline Dimensions 2.6 3.2 Red - Green - Blue - + Anode mark 1.1 0.6 2.0 4.8 2.0 0.9 2.4 0.4 0.9 1.8 Note: The tolerances unless mentioned is 0.1mm,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 2 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V SUR:25 Forward Current IF SYG:25 mA UB:30 Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Soldering Temperature Tsol 260 (for 5 seconds) SUR:2000 Electrostatic Discharge ESD SYG:2000 V UB:1000 SUR:60 Power Dissipation Pd SYG:60 mW UB:140 Peak Forward Current (Duty 1/10 @1KHz) Everlight Electronics Co., Ltd. Device No. : DSE-153- SUR:60 IFP SYG:60 mA UB:70 http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 3 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Symbol Iv Min. Typ. SUR 17 40 SYG 11 17 UB 9.0 15 ----- 120 21/2 Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage p SYG 575 428 SUR 624 ----- 573 UB 466 SUR 20 SYG VF ----- UB d SYG ----- 20 Device No. : DSE-153- mcd IF=20mA ----- deg IF=20mA ----- nm IF=20mA ----- nm IF=20mA ----- nm IF=20mA V IF=20mA A VR=5V SUR 2.0 2.4 2.0 2.4 3.8 4.5 SYG ----- 10 SYG ----- ----- 10 50 UB Everlight Electronics Co., Ltd. ----- 65 SUR IR Condition UB UB Reverse Current Unit 632 SUR Peak Wavelength Max. http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 4 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Typical Electro-Optical Characteristics Curves SUR Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 5 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Typical Electro-Optical Characteristics Curves SYG Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 6 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Typical Electro-Optical Characteristics Curves UB Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 7 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 8 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moistue-proof bag Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Desiccant Rev. 1.0 Label Page: 9 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 10 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 Precautions For Use 1. Over-current-proof Customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package, the LEDs should be kept at 30 or less and 90%RH or less. 2.3 The LEDs should be used within a year. 2.4 After opening the package, the LEDs should be kept at 30 or less and 70%RH or less. 2.5 The LEDs should be used within 168 hours (7 days) after opening the package. 2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 280 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Everlight Electronics Co., Ltd. Device No. : DSE-153- http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 11 of 12 Prepared by : Kenny Wang EVERLIGHT ELECTRONICS CO.,LTD. 15-23BSURSYGUBC/S530-A2/TR8 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd. Device No. : DSE-153- Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com http://www.everlight.com Prepared date: 08-04-2004 Rev. 1.0 Page: 12 of 12 Prepared by : Kenny Wang Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Everlight: 15-23BSURSYGUBC/S530-A2/TR8