LM137HVQML LM137HVQML 3-Terminal Adjustable Negative Regulators (High Voltage) Literature Number: SNVS314 LM137HVQML 3-Terminal Adjustable Negative Regulators (High Voltage) General Description Features The LM137HV is an adjustable 3-terminal negative voltage regulator capable of supplying in excess of -1.5A over an output voltage range of -47V to -1.2V. This regulators is exceptionally easy to apply, requiring only 2 external resistors to set the output voltage and 1 output capacitor for frequency compensation. The circuit design has been optimized for excellent regulation and low thermal transients. Further, the LM137HV features internal current limiting, thermal shutdown and safe-area compensation, making them virtually blowoutproof against overloads. The LM137HV serves a wide variety of applications including local on-card regulation, programmable-output voltage regulation or precision current regulation. The LM137HV is an ideal complement to the LM117HV adjustable positive regulator. Output voltage adjustable from -47V to -1.2V 1.5A output current guaranteed, -55C TJ +150C Line regulation typically 0.01%/V Load regulation typically 0.3% Excellent thermal regulation, 0.002%/W 77 dB ripple rejection Excellent rejection of thermal transients 50 ppm/C temperature coefficient Temperature-independent current limit Internal thermal overload protection Standard 3-lead transistor package Output short circuit protected Ordering Information NS Part Number SMD Part Number NS Package Number LM137HVH/883 H03A LM137HVK MD8 (Note 1) Package Description T0-39 Metal Can Bare Die Note 1: FOR ADDITIONAL DIE INFORMATION, PLEASE VISIT THE HI REL WEB SITE AT: www.national.com/analog/space/level_die (c) 2010 National Semiconductor Corporation 201225 www.national.com LM137HVQML 3-Terminal Adjustable Negative Regulators (High Voltage) December 16, 2010 LM137HVQML Connection Diagrams See Physical Dimensions section for further information TO-39 Metal Can Package TO-3 Metal Can Package 20122506 Bottom View See NS Package Number H03A 20122505 Bottom View See NS Package Number K02C Typical Applications Adjustable Negative Voltage Regulator 20122501 20122525 C1 = 1 F solid tantalum or 10 F aluminum electrolytic required for stability. Output capacitors in the range of 1 F to 1000 F of aluminum or tantalum electrolytic are commonly used to provide improved output impedance and rejection of transients. *C2 = 1 F solid tantalum is required only if regulator is more than 4 from power-supply filter capacitor. www.national.com 2 LM137HVQML Absolute Maximum Ratings (Note 2) Power Dissipation(Note 3) Input--Output Voltage Differential Operating Ambient Temperature Range Internally limited 50V -55C TA +125C +150C Maximum Junction Temperature Range Storage Temperature -65C TA +150C 300C Lead Temperature (Soldering, 10 sec.) Thermal Resistance JA H-pkg. (Still Air @ 0.5W) H-pkg. (500LF / Min Air Flow @ 0.5W) K-pkg. (Still Air @ 0.5W) K-pkg. (500LF / Min Air Flow @ 0.5W) 174C/W 64C/W 42C/W 14C/W JC H-pkg. (@ 1.0W) K-pkg. Package Weight (Typical) H-pkg. K-pkg ESD Rating(Note 4) 15C/W 4C/W 955mg 12,750mg 4000V Quality Conformance Inspection Mil-Std-883, Method 5004 and Method 5005 Subgroup Description Temp (C) 1 Static tests at +25C 2 Static tests at +125C 3 Static tests at -55C 4 Dynamic tests at +25C 5 Dynamic tests at +125C 6 Dynamic tests at -55C 7 Functional tests at +25C 8A Functional tests at +125C 8B Functional tests at -55C 9 Switching tests at +25C 10 Switching tests at +125C 11 Switching tests at -55C 3 www.national.com LM137HVQML LM137HVH 883 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. VIN = -4.0V, IO = 0.53A, VO = VRef Symbol Parameter Conditions Notes VRef Unit -1.272 -1.23 V 1 -1.28 -1.225 V 2, 3 -1.272 -1.23 V 1 -1.28 -1.225 V 2, 3 VO = -1.7V, VIN = -4.25V 3.0 mA 1, 2, 3 VO = -1.7V, VIN = -11.75V 3.0 mA 1, 2, 3 VO = -1.7V, VIN = -42V 5.0 mA 1, 2, 3 -42V VIN -4.25V, IO = 8mA 9.4 mV 1, 2, 3 VIN = -42V, IO = 8mA 100 A 1, 2, 3 VIN = -4.25V, IO = 8mA 100 A 1, 2, 3 VIN = -54V, IO = 8mA 100 A 1 Reference Voltage VIN = -42V, IO = 8mA IQ Minimum Load Current RLine Line Regulation IAdj Adjustment Pin Current IAdj Adjustment Pin Current Change -42V VIN -4.25V, IL = 8mA RLoad Load Regulation VRth Thermal Regulation ICL Current Limit Subgroups Max VIN = -4.25V, IO = 8 mA Min 6.0 A 1, 2, 3 VIN = -6.25V, 8mA IO 0.53A 5.0 A 1, 2, 3 -54V VIN -4.25V, IO = 8mA 6.0 A 1 VIN = -54V, 10mA IO 60mA 25 mV 1 VIN = -6.25V, 8mA IO 0.53A 25 mV 1 IO = 0.53A, VIN = -14.5V 5 mV 1 VIN -14.25 (Note 5) 0.5 1.6 A 1 VIN = -51.25V (Note 5) 0.1 0.5 A 1 AC Parameters Symbol RR Parameter Ripple Rejection www.national.com Conditions Notes VIN = -6.25V, VO = VRef, f = 120Hz, (Note 6, eI = 1VRMS, IL = 125mA Note 7) 4 Min Max Unit Subgroups 66 dB 4, 5, 6 883 Electrical Characteristics DC Parameters The following conditions apply, unless otherwise specified. VIN = -40V, IL = 8.0mA, VO = VRef = -1.25V (nominal) Symbol Parameter Conditions Notes VIN = -4.25V VRef Reference Voltage RLine Line Regulation RLoad Load Regulation VRth IAdj IAdj IQ Thermal Regulation Adjustment Pin Current Adjustment Pin Current Change Minimum Load Current Min Unit 1.272 -1.23 V 1 -1.28 -1.225 V 2, 3 VIN = -42V -1.272 -1.23 V 1 VIN = -41.3V -1.28 -1.225 V 2, 3 -42V VIN -4.25V 9.4 mV 1 -41.3V VIN -4.25V 9.4 mV 2, 3 VIN = -54V, 10mA IO 110mA -25 25 mV 1 VIN = -6.25V, 8mA IO 1.5A -25 25 mV 1, 2, 3 IO = 1.5A, VIN = -14.5V, t = 10mS -5.0 5.0 mV 1 VIN = -42V 100 A 1 VIN = -41.3V 100 A 2, 3 VIN = -4.25V 100 A 1, 2, 3 VIN = -54V 100 A 1 -42V VIN -4.25V -5.0 5.0 A 1 -41.3V VIN -4.25V -5.0 5.0 A 2, 3 -54V VIN -4.25V -6.0 6.0 A 1 VIN = -6.25V, 8mA IO 1.5A -5.0 5.0 A 1, 2, 3 VO = 1.7V, VIN = -4.25V 3.0 mA 1, 2, 3 VO = -1.7V, VIN = -11.75V 3.0 mA 1, 2, 3 VO = -1.7V, VIN = -42V 5.0 mA 1 2, 3 VO = -1.7V, VIN = -41.3V ISC Short Circuit Subgroups Max VIN = -5V VIN = -51.25V (Note 5) 5.0 mA -2.85 -1.6 A 1 -3.5 -1.6 A 2, 3 -0.8 -0.2 A 1 AC Parameters: The following conditions apply, unless otherwise specified. VIN = -40V, IL = 8.0mA, VO = VRef = -1.25V (nominal) Symbol RR Parameter Ripple Rejection Conditions VIN = -6.25V, VO = VRef, f = 120Hz, ein = 1V RMS, IL = 0.5A Notes (Note 6, Note 7) Min 66 Max Unit Subgroups dB 4, 5, 6 Note 2: "Absolute Maximum Ratings" indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by TJmax (maximum junction temperature), JA (package junction to ambient thermal resistance, and TA (ambient temperature). The maximum allowable power dissipation at any temperature is PDmax = (TJmax - TA) / JA or the number given in the Absolute Maximum Ratings, whichever is lower. Note 4: Human body model, 100pF discharged through 1.5K Note 5: Guaranteed parameter not tested. Note 6: Tested at +25C, guaranteed, but not tested at +125C and -55C Note 7: Bench test per (SG)RPI-3-362 Use TDN 70256657 (NSSG) Note 8: Group "A" sample only, test at all temperature. 5 www.national.com LM137HVQML LM137HVK www.national.com 6 Schematic Diagram 20122502 LM137HVQML When power is dissipated in an IC, a temperature gradient occurs across the IC chip affecting the individual IC circuit components. With an IC regulator, this gradient can be especially severe since power dissipation is large. Thermal regulation is the effect of these temperature gradients on output voltage (in percentage output change) per Watt of power change in a specified time. Thermal regulation error is independent of electrical regulation or temperature coefficient, and occurs within 5 ms to 50 ms after a change in power dissipation. Thermal regulation depends on IC layout as well as electrical design. The thermal regulation of a voltage regulator is defined as the percentage change of VOUT, per Watt, within 20122503 LM137HV, VOUT = -10V VIN-VOUT = -40V IL = 0A0.25A0A Vertical sensitivity, 5 mV/div FIGURE 1. 20122504 LM137HV, VOUT = -10V VIN-VOUT = -40V IL = 0A0.25A0A Horizontal sensitivity, 20 ms/div FIGURE 2. 7 www.national.com LM137HVQML the first 10 ms after a step of power is applied. The LM137HV's specification is 0.02%/W, max. In Figure 1, a typical LM137HV's output drifts only 3 mV (or 0.03% of VOUT = -10V) when a 10W pulse is applied for 10 ms. This performance is thus well inside the specification limit of 0.02%/W x 10W = 0.2% max. When the 10W pulse is ended, the thermal regulation again shows a 3 mV step as the LM137HV chip cools off. Note that the load regulation error of about 8 mV (0.08%) is additional to the thermal regulation error. In Figure 2, when the 10W pulse is applied for 100 ms, the output drifts only slightly beyond the drift in the first 10 ms, and the thermal error stays well within 0.1% (10 mV). Thermal Regulation LM137HVQML Typical Applications Adjustable High Voltage Regulator 20122507 Full output current not available at high input-output voltages *The 10 F capacitors are optional to improve ripple rejection Current Regulator Negative Regulator with Protection Diodes 20122508 20122510 *When CL is larger than 20 F, D1 protects the LM137HV in case the input supply is shorted **When C2 is larger than 10 F and -VOUT is larger than -25V, D2 protects the LM137HV is case the output is shorted Adjustable Current Regulator High Stability -40V Regulator 20122511 *Use resistors with good tracking TC < 25 ppm/C 20122509 www.national.com 8 LM137HVQML Typical Performance Characteristics (H and K-STEEL Package) Load Regulation Current Limit 20122514 20122513 Adjustment Current Dropout Voltage 20122515 20122516 Temperature Stability Minimum Operating Current 20122517 20122518 9 www.national.com LM137HVQML Ripple Rejection Ripple Rejection 20122519 20122520 Ripple Rejection Output Impedance 20122521 20122522 Line Transient Response Load Transient Response 20122523 www.national.com 20122524 10 Date Released 12/16/2010 Revision A Section Changes New Release, Corporate format 11 2 MDS data sheets converted into one Corp. Data sheet format. MNLM137HV-K rev 0A0, MNLM137HV-H rev 2A0 MDS datasheets will be archived. www.national.com LM137HVQML Revision History LM137HVQML Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) NS Package Number H03A Metal Can Package (K) NS Package Number K02C www.national.com 12 LM137HVQML Notes 13 www.national.com LM137HVQML 3-Terminal Adjustable Negative Regulators (High Voltage) Notes For more National Semiconductor product information and proven design tools, visit the following Web sites at: www.national.com Products Design Support Amplifiers www.national.com/amplifiers WEBENCH(R) Tools www.national.com/webench Audio www.national.com/audio App Notes www.national.com/appnotes Clock and Timing www.national.com/timing Reference Designs www.national.com/refdesigns Data Converters www.national.com/adc Samples www.national.com/samples Interface www.national.com/interface Eval Boards www.national.com/evalboards LVDS www.national.com/lvds Packaging www.national.com/packaging Power Management www.national.com/power Green Compliance www.national.com/quality/green Switching Regulators www.national.com/switchers Distributors www.national.com/contacts LDOs www.national.com/ldo Quality and Reliability www.national.com/quality LED Lighting www.national.com/led Feedback/Support www.national.com/feedback Voltage References www.national.com/vref Design Made Easy www.national.com/easy www.national.com/powerwise Applications & Markets www.national.com/solutions Mil/Aero www.national.com/milaero PowerWise(R) Solutions Serial Digital Interface (SDI) www.national.com/sdi Temperature Sensors www.national.com/tempsensors SolarMagicTM www.national.com/solarmagic PLL/VCO www.national.com/wireless www.national.com/training PowerWise(R) Design University THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION ("NATIONAL") PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS, IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT NATIONAL'S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS. EXCEPT AS PROVIDED IN NATIONAL'S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness. National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other brand or product names may be trademarks or registered trademarks of their respective holders. Copyright(c) 2010 National Semiconductor Corporation For the most current product information visit us at www.national.com National Semiconductor Americas Technical Support Center Email: support@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Technical Support Center Email: europe.support@nsc.com National Semiconductor Asia Pacific Technical Support Center Email: ap.support@nsc.com National Semiconductor Japan Technical Support Center Email: jpn.feedback@nsc.com IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated