Datasheet for part number MS3106F18-1PW Our Catalog Part Number: MS3106F18-1PW Our Global Manufacturing Part Number: 045276-0001 W Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015 Product Datasheet Thread Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Contacts installed Shielding Insulator Rotation Contact Rating at +20 C (68 F) (Size 15/15S/16/16S) Contact Resistance (Size 15/15S/16/16S) Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 15/15S/16/16S) Gage Coupling Torque Contact Retention (Size 15/15S/16/16S) Shell Material Shell Plating Insulator and Gromet Material Contact Material Connector with threaded coupling Plug, straight Endbell with cable clamp Pin 18 18-1 10 contacts size 16 Solder Cup Hard silver yes no 70 22 A 6 m In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 M 1600 Vrms 1,1 mm Standard insulator material -55/+125C (-67/257F) IP65 acc. to DIN 40 050 500 hours salt spray resistant 500 min 1,0 N For infos on Gage please see catalog VG95234, part 1 Closing: 8 Nm max / Opening: 0,58 Nm min 35 N Aluminium alloy Olive drab chromate coating over cadmium plating Neoprene Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 15/15S/16/16S) 6,2 mm General Info All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 1 of 2 Datasheet for part number MS3106F18-1PW Our Catalog Part Number: MS3106F18-1PW Our Global Manufacturing Part Number: 045276-0001 W Brand: Cannon Product Category: Circular Product Line: MIL-DTL 5015 Series I Series: MIL-C-5015 Product Datasheet SC_P_Code CA Specifications and dimensions subject to change. Page 2 of 2