ALUMINUM ELECTROLYTIC CAPACITORS ZS 4.5mmL Chip Type series Chip type with 4.5mm height. WX Designed for surface mounting on high density PC board. Applicable to automatic mounting machine fed with carrier tape. Smaller Compliant to the RoHS directive (2011/65/EU). ZT ZS High Te m p e rature ZP Bi-polarized Smaller Specifications ZR Item Performance Characteristics Category Temperature Range -40 to + 85C Rated Voltage Range 4 to 50V Rated Capacitance Range 0.1 to 220F Capacitance Tolerance + - 20% at 120Hz, 20C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (A) ,whichever is greater. 6.3 0.30 4 0.50 Rated voltage (V) tan (MAX.) Tangent of loss angle (tan ) Measurement frequency : 120Hz at 20C 16 25 35 50 0.19 0.16 0.14 0.14 10 0.24 Measurement frequency : 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance ratio Stability at Low Temperature ZT / Z20 (MAX.) 4 7 15 Z- 40C / Z+20C 6.3 4 8 16 2 4 35 2 3 50 2 3 Within +- 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the specified values for the endurance characteristics listed above. The capacitors are kept on a hot plate for 30 seconds, which is Capacitance change Within + 10% of the initial capacitance value - maintained at 250C. The capacitors shall meet the Less than or equal to the initial specified value tan characteristic requirements listed at right when they are Less than or equal to the initial specified value Leakage current removed from the plate and restored to 20C. Black print on the case top. Shelf Life Resistance to soldering heat Marking Chip Type Type numbering system (Example : 16V 10F) 1 Positive 4.5 Voltage mark for 6.3V is C 0.2 +0.1 - 0.2 4 5 6 7 8 9 10 11 12 13 14 4 1.8 4.3 4.3 1.0 D A B C E 5 2.1 5.3 5.3 1.3 (mm) 6.3 2.4 6.6 6.6 2.2 Configuration Capacitance tolerance (+ - 20%) Rated capacitance (10F) Rated voltage (16V) Series name Negative 0.5 to 0.8 6V . 3 Taping code E B 0.2 A2 10 16V D0.5 Voltage 2 U Z S 1 C 1 0 0 MC L 1 GB A0.3 A0.3 Plastic platform 0.3 MAX. 0.5 MAX. Capacitance Lot No. 25 2 4 Capacitance change tan Leakage current The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Endurance 10 3 8 Type Dimensions 4 0G V Cap. (F) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 4 4 5 6.3 6.3 0J 28 33 56 96 4 5 5 6.3 10 1A 28 37 45 70 5 5 6.3 16 1C 33 41 52 4 5 6.3 6.3 25 1E 23 37 49 58 4 5 6.3 6.3 35 1V 16 27 42 52 4 5 6.3 50 1H 18 29 46 4 4 4 4 4 4 4 5 6.3 Case size D (mm) 1.0 2.0 2.8 4.0 8.4 13 17 20 33 Rated ripple Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz or more 1.50 Taping specifications are given in page 23. Recommended land size, soldering by reflow are given in page 18, 19. Please select UR(p.150), UG(p.158) series if high C/V products are reqired. Please refer to page 3 for the minimum order quantity. CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: UZS0J220MCL1GB UZS1E220MCL1GB UZS1H0R1MCL1GB UZS0G330MCL1GB UZS0G470MCL1GB UZS0G101MCL1GB UZS0G221MCL1GB UZS0J330MCL1GB UZS0J470MCL1GB UZS0J101MCL1GB UZS1A220MCL1GB UZS1A330MCL1GB UZS1A470MCL1GB UZS1C100MCL1GB UZS1C220MCL1GB UZS1C330MCL1GB UZS1C470MCL1GB UZS1E4R7MCL1GB UZS1E100MCL1GB UZS1E330MCL1GB UZS1V4R7MCL1GB UZS1V100MCL1GB UZS1V220MCL1GB UZS1HR22MCL1GB UZS1HR33MCL1GB UZS1HR47MCL1GB UZS1H010MCL1GB UZS1H2R2MCL1GB UZS1H3R3MCL1GB UZS1H4R7MCL1GB UZS1H100MCL1GB UZT1C100MCL1GB