Hyper Micro SIDELED(R) Hyper-Bright LED Lead (Pb) Free Product - RoHS Compliant LS Y876, LA Y876, LO Y876, LY Y876 LA_Y876 abgekundigt nach OS-PD-2006-009 wird nicht ersetzt werden. LA_Y876 obsolete acc. to OS-PD-2006-009 no replacement. Besondere Merkmale * Gehausetyp: weies SMT-Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: kleine Bauform mit extrem breiter Abstrahlcharakteristik; ideal fur Einkopplungen in Lichtleiter * Wellenlange: 633 nm (super-rot), 615 nm (amber), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 9 lm/W (gelb, orange, amber), 5 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 3000/Rolle, o180 mm oder 10000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 9 Features * package: white SMT package, colorless clear resin * feature of the device: small package with extremely wide viewing angle; ideal for coupling in light guides * wavelength: 633 nm (super-red), 615 nm (amber), 606 nm (orange), 587 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 9 lm/W (yellow, orange, amber), 5 lm/W (super-red) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 3000/reel, o180 mm or 10000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 9 Anwendungen * optimale Einkopplung in Lichtleiter * Hinterleuchtung (LCD, Mobiltelefone, Tasten, Allgemeinbeleuchtung, Werbebeleuchtung) * Signal- und Symbolleuchten * Automobilbereich (z. B. Instrumentenbeleuchtung) Applications * optimized coupling into light guides * backlighting (LCD, cellular phones, keys, general lightning, illuminated advertising) * signal and symbol luminaire * automotive (e. g. car radio backlighting) 2009-12-18 1 LS Y876, LA Y876, LO Y876, LY Y876 Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 15 Lichtstrom2) Seite 15 Bestellnummer Type Color of Emission Luminous Intensity1) page 15 Luminous Flux2) page 15 IF = 20 mA IV (mcd) IF = 20 mA V (mlm) nLA Y876-Q2S1-1 nLA Y876-R2T1-1 nLA Y876-Q2T1-1 amber LS Y876-P2R1-1 LS Y876-Q2S1-1 LS Y876-P2S1-1 super-red LO Y876-Q2S1-24 LO Y876-R2T1-24 LO Y876-Q2T1-24 LY Y876-Q2S1-26 LY Y876-R2T1-26 LY Y876-Q2T1-26 Ordering Code 90 ... 224 140 ... 355 90 ... 355 480 (typ.) 760 (typ.) 665 (typ.) Q65110A2405 Q65110A2406 Q65110A2407 56 ... 140 90 ... 224 56 ... 224 300 (typ.) 480 (typ.) 420 (typ.) Q65110A2411 Q65110A1628 Q65110A2412 orange 90 ... 224 140 ... 355 90 ... 355 480 (typ.) 760 (typ.) 665 (typ.) Q65110A2408 Q65110A2409 Q65110A2410 yellow 90 ... 224 140 ... 355 90 ... 355 480 (typ.) 760 (typ.) 665 (typ.) Q65110A2413 Q65110A2414 Q65110A2415 n LA Y876 abgekundigt nach OS-PD-2006-009 - wird nicht ersetzt werden LA Y876 obsolete acc. to OS-PD-2006-009 - no replacement Letzte Bestellung / Last Order: 15.04.2007 Letzte Lieferung / Last Delivery: 15.10.2007 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LO Y876-Q2S1-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen Q2, R1, R2 oder S1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LO Y876-Q2S1-24 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). LS Y876-P2R1-1 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LO Y876-Q2S1-24 means that only one group Q2, R1, R2 or S1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LO Y876-Q2S1-24 means that only 1 wavelength group -2, -3, or -4 will be shippable. LS Y876-P2R1-1 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable (see page 5 for explanation). . 2009-12-18 2 LS Y876, LA Y876, LO Y876, LY Y876 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit LS, LO, LA LY Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 30 mA Stostrom Surge current t 10 s, D = 0.005, TA=25C IFM Sperrspannung3) Seite 15 Reverse voltage3) page 15 IF = 10 A, TA=25C VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 80 mW Rth JA 630 K/W Rth JS 350 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 15 Junction/ambient4) page 15 Sperrschicht/Lotpad Junction/solder point 2009-12-18 3 500 200 mA LS Y876, LA Y876, LO Y876, LY Y876 Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Symbol Symbol (typ.) Dominantwellenlange 5) Seite 15 Dominant wavelength 5) page 15 IF = 20 mA Werte Values Einheit Unit LS LA LO LY peak 645 622 610 591 dom 633 6 615 6 606* 587* nm nm -6/+3 -7/+8 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 16 16 16 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 120 Grad deg. Durchlassspannung6) Seite 15 Forward voltage6) page 15 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.0 2.3 1.83 2.0 2.33 1.85 2.0 2.35 1.9 2.0 2.4 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 0.01 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.13 0.13 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.05 0.06 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 2.0 - 1.8 - 1.7 - 2.5 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 5 * Einzelgruppen siehe Seite 5 Individual groups on page 5 2009-12-18 4 9 9 9 lm/W LS Y876, LA Y876, LO Y876, LY Y876 Wellenlangengruppen (Dominantwellenlange)5) Seite 15 Wavelength Groups (Dominant Wavelength)5) page 15 Gruppe Group yellow orange Einheit Unit min. max. min. max. 2 580 583 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 nm 6 592 595 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group P2 Q1 Q2 R1 R2 S1 S2 T1 Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) 56 ... 71 ... 90 ... 112 ... 140 ... 180 ... 224 ... 280 ... 71 90 112 140 180 224 280 355 Lichtstrom2) Seite 15 Luminous Flux2) page 15 V (mlm) 190 (typ.) 240 (typ.) 300 (typ.) 380 (typ.) 480 (typ.) 600 (typ.) 760 (typ.) 950 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur 4 bzw. 6 Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes either a lower familiy group, an upper family group or a grouping of all individual groups of 4 or 6 brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: R2-3 Example: R2-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength R2 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2009-12-18 5 LS Y876, LA Y876, LO Y876, LY Y876 Relative spektrale Emission2) Seite 15 Relative Spectral Emission2) page 15 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL00235 100 Irel % 80 V 60 yellow orange amber super-red 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 15 Radiation Characteristic2) page 15 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2009-12-18 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS Y876, LA Y876, LO Y876, LY Y876 Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 IV/IV(20 mA) = f (IF); TA = 25 C OHL00232 10 2 mA 5 OHL10233 10 1 IV I V (20 mA) IF 10 0 10 1 5 10 -1 10 0 5 super-red yellow orange/amber 10 -1 1.4 1 1.8 2.2 2.6 10 -2 10 0 3 V 3.4 10 1 IF VF Relative Lichtstarke2) Seite 15 Relative Luminous Intensity2) page 15 IV/IV(25 C) = f (Tj); IF = 20 mA Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( T) IF OHL00090 35 mA 10 2 mA OHL00238 IV 2.0 IV (25 C) 30 1.6 TS orange yellow amber super-red 25 TA 1.2 20 15 0.8 10 orange yellow amber super-red 0.4 5 0 TS temp. solder point TA temp. ambient 0 20 40 60 0 -20 80 C 100 20 40 60 C 100 Tj T 2009-12-18 0 7 LS Y876, LA Y876, LO Y876, LY Y876 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LS, LA, LO OHL00687 0.6 A IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C LY t 0.5 T 0.4 D= A IF IF D = TP IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.2 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.15 0.10 0.05 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LS, LA, LO Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C LY OHL00688 0.30 A t tP 0.20 0.3 IF OHL00689 0.25 tP t D = TP OHL00690 0.12 tP IF IF A t D = TP tP IF 0.25 T 0.10 T 0.20 D= 0.08 D= 0.15 0.10 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.06 0.04 0.05 0.02 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2009-12-18 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 tp 8 LS Y876, LA Y876, LO Y876, LY Y876 Mazeichnung8) Seite 15 Package Outlines8) page 15 0.25 (0.010) 0.20 (0.008) 0 ... 0.1 (0 ... 0.004) (0.6 (0.024)) (0.4 (0.016)) (15) 0.3 (0.012) 0.7 (0.028) 0.5 (0.020) 2.1 (0.083) 1.2 (0.047) 2.3 (0.091) Cathode 0.5 (0.020) 2.9 (0.114) 3.1 (0.122) A Light emitting area typ. 1.7 x 0.7 C 1.3 (0.051) 1.1 (0.043) 1.0 (0.039) GPLY6058 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h 6 mg Gurtung / Polaritat und Lage8) Seite 15 Verpackungseinheit 3000/Rolle, o180 mm oder 10000/Rolle, o330 mm Packing unit 3000/reel, o180 mm or 10000/reel, o330 mm 2 (0.079) 1.25 (0.049) 3.3 (0.130) 2.4 (0.094) 1.5 (0.059) 3.5 (0.138) 4 (0.157) 8.1 (0.319) Method of Taping / Polarity and Orientation8) page 15 1.75 (0.069) Gewicht / Approx. weight: 0.9 (0.035) 1.4 (0.055) 0.3 (0.012) max. OHAY1515 2009-12-18 9 LS Y876, LA Y876, LO Y876, LY Y876 Empfohlenes Lotpaddesign8) 9) Seite 15 Recommended Solder Pad8) 9) page 15 IR Reflow Loten IR Reflow Soldering Bauteil positioniert Component location on pad A C A C 2009-12-18 0.7 (0.028) 2.2 (0.087) 0.8 (0.031) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Lotstopplack Solder resist 10 OHPY1315 LS Y876, LA Y876, LO Y876, LY Y876 Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2009-12-18 11 s 250 LS Y876, LA Y876, LO Y876, LY Y876 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2009-12-18 12 LS Y876, LA Y876, LO Y876, LY Y876 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials P -1 +Q -1 D/ C: (9 D) 20 00 (Q )Q TY : R ic NO : O S em S BA TC H (6 P) LO T (1 T) NO : (X ) PR OD 5 14 2 110 0 M DE -1 18 (G ) GR OU P: P -1 +Q R u L lt S iT Y O T67 P L 6 8 01 C: 99 D/ TY : O SR AM 20 00 21 D) 00 (9 21 : 34 )Q (Q ic 5 S NO O 12 H em H S TC (X ) PR OD NO : (1 T) 11 00 LO T 14 2 NO (6 P) : 12 BA 3G R A on M du O p ct to or s 44 M 2100 Y E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: at Muster 01 44 8 2199 A on M du O p ct to or s . RH % /60 C R 18 T6 P 76 LE . H) (R e 3G H 12 34 y dit mi ag NO : 12 nk, bla cod bar d GR OU P: M ul LS ti Y TO el see lab e If hu ive _ < s ur s ). ur s Ho de ur s Ho co 72 Ho ur te 48 e Ho 24 6 da e tim e th tim or ). 23 wi nt tim e or l wi fac t C MO Flo tim s TO at or e. ca at Flo tha ale el or ur nth OP nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > , Mo se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor ar J-S thi va p. ks elf s Ye _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W Ho un Af flody qu Indno ire DE 1. e 4 8 re ed re y is qu JE 2. bo e Mo or tim 16 re C/ : e es dit2b a) St tim or mi ed or g is IP tim e vic b) or Hu Flo en tim ce or De 2a kin te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo (G ) Muster L VE LE re lat ra ck re 30 N s IVE RS inf pa % k ainIT TO of to 90 ea d ntNSUC < ns (p TIO or d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C < tor ll pr SE DE MY Barcode label D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2009-12-18 13 OHA02044 LS Y876, LA Y876, LO Y876, LY Y876 Revision History: 2009-12-18 Previous Version: 2007-08-08 Page Subjects (major changes since last revision) Date of change 1, 2 amber obsolete acc. to OS-PD-2006-009 2006-10-04 1, 9 additional information 2009-12-18 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 10) page 15 may only be used in life-support devices or systems 11) page 15 with the express written approval of OSRAM OS. 2009-12-18 14 LS Y876, LA Y876, LO Y876, LY Y876 Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 5 mm 2 je Pad). 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Durchlassspannungen werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 8) Mae werden wie folgt angegeben: mm (inch) 9) Gehause halt TTW-Lothitze aus 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. 11) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 2) 3) 4) 5) 6) 2009-12-18 7) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 8) Dimensions are specified as follows: mm (inch). Package able to withstand TTW-soldering heat A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 15 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 5 mm 2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltage are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.