CGA-3318Z CGA-3318Z Dual CATV Broadband High Linearity SiGe HBT Amplifier DUAL CATV BROADBAND HIGH LINEARITY SiGe HBT AMPLIFIER Package: ESOP-8 Product Description Features RFMD's CGA-3318Z is a high performance Silicon Germanium HBT MMIC Amplifier. Designed with SiGe process technology for excellent linearity at an exceptional price. A Darlington configuration is utilized for broadband performance. The heterojunction increases breakdown voltage and minimizes leakage current between junctions. The CGA-3318Z contains two amplifiers for use in wideband Push-Pull CATV amplifiers requiring excellent second order performance. The second and third order non-linearities are greatly improved in the push-pull configuration. Optimum Technology Matching(R) Applied Amplifier Configuration InGaP HBT SiGe BiCMOS Si BiCMOS SiGe HBT GaAs pHEMT Si CMOS Si BJT 2 7 3 6 4 5 Lead-Free, RoHS Compliant, and Green Packaging Excellent CSO/CTB/XMOD Performance at +34dBmV Output Power Per Tone Dual Devices in Each SOIC-8 Package Simplify Push-Pull Configuration PC Board Layout 5MHz to 900MHz Operation Applications 8 1 GaAs HBT GaAs MESFET CATV Head End Driver and Predriver Amplifier CATV Line Driver Amplifier GaN HEMT InP HBT Parameter Min. Small Signal Gain Specification Typ. Max. dB dB dB dBm dBm 67.0 69.0 36.5 38.0 dBm dBm dBm 36.0 38.0 20.0 21.0 20.6 17.0 dBm dBm dBm dBm dBm dBm dB dB dB dB dB V mA C/W 10.0 OIP2, Tone Spacing=1MHz OIP3, Tone Spacing=1MHz Output Power at 1dB Compression 18.6 Input Return Loss 10 Output Return Loss 12.0 10 Noise Figure Device Operating Voltage Device Operating Current Thermal Resistance Unit 13.2 12.5 12.0 69.0 71.5 3.9 135 4.2 4.3 5.0 4.1 150 50 6.0 4.3 165 Condition 5MHz 50MHz and 500MHz 870MHz 50MHz, POUT per tone=+6dBm 250MHz, POUT per tone 500MHz, POUT per tone 50MHz, POUT per tone=+6dBm 500MHz, POUT per tone=+6dBm 870MHz, POUT per tone=+6dBm 50MHz 500MHz 870MHz 500MHz 50 - 870MHz 500MHz 50 - 870MHz 50MHz, Balun Insertion Loss Included 500MHz, Balun Insertion Loss Included 870MHz, Balun Insertion Loss Included (Junction to Lead) RF MICRO DEVICES(R), RFMD(R), Optimum Technology Matching(R), Enabling Wireless ConnectivityTM, PowerStar(R), POLARISTM TOTAL RADIOTM and UltimateBlueTM are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. (c)2006, RF Micro Devices, Inc. DS120502 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 1 of 10 CGA-3318Z Absolute Maximum Ratings Parameter Rating Unit 225 mA Max Device Current (ID) Max Device Voltage (VD) 6 V +18 dBm +150 C -40 to +85 C Max RF Input Power Max Junction Temp (TJ) Operating Temp Range (TL) Max Storage Temp Caution! ESD sensitive device. Exceeding any one or a combination of the Absolute Maximum Rating conditions may cause permanent damage to the device. Extended application of Absolute Maximum Rating conditions to the device may reduce device reliability. Specified typical performance or functional operation of the device under Absolute Maximum Rating conditions is not implied. RoHS status based on EUDirective2002/95/EC (at time of this document revision). +150 C ESD Rating - Human Body Model (HBM) 1B Class Moisture Sensitivity Level 3 MSL The information in this publication is believed to be accurate and reliable. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents, or other rights of third parties, resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended application circuitry and specifications at any time without prior notice. *Note: Load condition1, ZL =50. Load condition2, ZL =10:1 VSWR. Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation, the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias Conditions should also satisfy the following expression: IDVD <(TJ -TL)/RTH, j-l and TL =TLEAD Parameter Specification Typ. Min. Worst Case Over Band, CSO Worst Case Over Band, CTB Worst Case Over Band, XMOD Unit Max. 70 68 63 dBc dBc dBc Condition 79 Ch., Flat, +34dBmV 79 Ch., Flat, +34dBmV 79 Ch., Flat, +34dBmV Typical RF Performance: VS=8V, ID=150mA @ TL=+25C, RBIAS=51 Ohms, Push-Pull Configuration Gain vs. Frequency 16 14 |S21| (dB) 12 10 +25C -40C 8 +85C 6 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Input Return Loss vs. Frequency 0 -5 -10 +25C -4 -40C -6 +85C -8 -15 +25C -20 -40C -25 +85C |S22| (dB) |S11| (dB) Output Return Loss vs. Frequency 0 -2 -10 -12 -14 -16 -18 -30 -20 0 100 200 300 400 500 600 Frequency (MHz) 2 of 10 700 800 900 1000 0 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS120502 CGA-3318Z Typical RF Performance: VS=8V, ID=150mA @ TL=+25C, RBIAS=51 Ohms, Push-Pull Configuration IP3 vs. Temperature 45 75 40 70 35 -40C 25C 30 IP2 vs. Temperature 80 IP2 (dBm) IP3 (dBm) 50 85C 65 60 25 55 20 50 -40C +25C +85C 0 0.2 0.4 0.6 0.8 0 1 0.2 Second Harmonic vs. Pout and Frequency Data shown is typical at 25C 90 90 80 80 70 60 66MHz 50 100MHz 40 250MHz 30 0.8 1 70 60 66MHz 50 100MHz 40 250MHz 500MHz 30 500MHz 20 20 0 3 6 Pout (dBm) 9 12 0 15 90 4 80 dBc 5 9 12 15 70 2 60 1 50 0 6 Push-Pull CTB/CSO/XMOD 34 dBmV/Ch., 79 Ch., Flat 100 3 3 Pout (dBm) Push-Pull Noise Figure 50MHz-900MHz Typical 6 NF (dB) 0.6 Third Harmonic vs. Pout and Frequency Data shown is typical at 25C 100 IM3 (dBc) IM2 (dBc) 100 0.4 Frequency (GHz) Frequency (GHz) CTB CSO- CSO+ Xmod 40 0 200 400 600 Frequency (MHz) DS120502 800 1000 0 100 200 300 400 500 600 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 3 of 10 CGA-3318Z CSO/CTB/XMOD Performance: VS=8V, ID=150mA @ TL=+25C, RBIAS=51 Ohms, Push-Pull Config, 79 Ch. Flat Analog, No Digital Channels. Push-Pull CTB vs. Pout and Frequency 100 90 32dBmV 34dBmV 36dBmV 38dBmV 40dBmV 42dBmV 90 80 70 34dBmV 36dBmV 38dBmV 40dBmV 42dBmV 70 60 60 50 50 40 40 0 100 200 300 400 500 0 600 100 Push-Pull CSO- vs. Pout and Frequency 100 200 300 400 500 600 Frequency (MHz) Frequency (MHz) Push-Pull CSO+ vs. Pout and Frequency 100 90 90 80 80 70 70 dBc dBc 32dBmV 80 dBc dBc Push-Pull XMOD vs. Pout and Frequency 100 60 60 50 32dBmV 34dBmV 36dBmV 38dBmV 40dBmV 42dBmV 32dBmV 38dBmV 50 34dBmV 40dBmV 36dBmV 42dBmV 40 40 0 100 200 300 400 Frequency (MHz) 500 600 0 100 200 300 400 500 600 Frequency (MHz) Note: CSO measurements > 85 dBc can be limited by system noise. 4 of 10 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS120502 CGA-3318Z Typical RF Performance - Single Ended - 50 Ohm System VS=8V, ID=75mA (one amp biased), TL=+25C, RBIAS=51 Ohms Gain & Isolation vs. Frequency 16 0 -4 -5 12 -8 -10 10 -12 8 -16 6 -20 Isolation -20 -25 4 -24 2 -28 -35 -32 -40 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 |S11| -15 dB Gain Isolation (dB) Gain (dB) 14 |S11| & |S22| vs. Frequency 0 -30 |S22| 0.0 4.0 0.5 1.0 Frequency (GHz) 1.5 2.0 2.5 3.0 3.5 4.0 3.5 4.0 Frequency (GHz) Typical RF Performance - Single Ended - 37.5 Ohm System VS=8V, ID=75mA (one amp biased), TL=+25C, RBIAS=51 Ohms Gain & Isolation vs. Frequency 16 Gain -5 -8 -10 10 -12 8 -16 -20 Isolation -20 -30 -24 2 -28 -35 0 -32 -40 0.5 1.0 1.5 2.0 2.5 Frequency (GHz) DS120502 3.0 3.5 4.0 |S11| -25 4 0.0 |S22| -15 dB Isolation (dB) -4 6 |S11| & |S22| vs. Frequency 0 12 14 Gain (dB) 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 5 of 10 CGA-3318Z 50MHz to 870MHz Application Circuit Schematic Vs RBIAS 1 F P Tant. 0.01 F P 1000pF 68pF 220 nH 1 Macom ETC1-1-13 8 Amp 1 1000 pF 1000 pF 2,3 6,7 4 5 Amp 2 CGA-3318 SOIC-08 1 F P Tant. Macom ETC1-1-13 1000 pF 1000 pF 0.01 F P 1000pF 220 nH 68pF RBIAS Vs 50MHz to 870MHz Evaluation Board Layout Rbias 1uF Tant. RF INPUT Balun ETC1-1-13 RF OUTPUT 220nH 1000pF 1000pF 220nH 1uF Tant. .01uF 1000pF 68pF Balun ETC1-1-13 1000pF 1000pF 68pF 1000pF .01uF ECB-101611 Rev A ESOP-8 Push-Pull Eval Board Rbias 6 of 10 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS120502 CGA-3318Z 5MHz to 210MHz Application Circuit Schematic Vs RBIAS 1 F P Tant. 0.01 F P 1000pF 68pF 10 P + 1 Macom ETC1-1T 8 Amp 1 0.01 F P 0.01 F P 2,3 6,7 0.01 F P 0.01 F P 4 5 Amp 2 CGA-3318 SOIC-08 1 F P Tant. 0.01 F P 1000pF Macom ETC1-1T 10 P + 68pF RBIAS Vs 5MHz to 100MHz Evaluation Board Layout Rbias 1uF Tant. RF INPUT RF OUTPUT 10uH Balun ETC1-1T 0.01uF 0.01uF 10uH 1uF Tant. .01uF 1000pF 68pF 0.01uF Balun ETC1-1T 0.01uF 68pF 1000pF .01uF ECB-101611 Rev A ESOP-8 Push-Pull Eval Board Rbias DS120502 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 7 of 10 CGA-3318Z Recommended Bias Resistor Values for ID= 150mA Supply Voltage (VS) 8V RBIAS RBIAS Power Rating RBIAS= 9V 12V 51 : 1/2W 1/2W 15V : 1W 1W 2(VS-VD) ID Typical 5-100 MHz RF Performance: VS=8V, ID=150mA @ TL=+25C, Push-Pull Configuration Gain vs. Frequency -5 |S11| and |S22| (dB) 14 12 |S21| (dB) Return Loss vs. Frequency 0 16 10 8 6 -10 |S22| -15 -20 |S11| -25 -30 0 10 20 30 40 50 60 70 80 90 100 0 10 20 P1dB and IP3 vs. Frequency 40 8 21 39 7 20 38 19 37 35 16 0 10 20 30 40 50 60 70 Frequency (MHz) 8 of 10 50 60 70 80 90 100 80 90 100 Noise Figure vs. Frequency 5 4 3 2 IP3 17 36 NF (dB) P1dB 18 40 6 IP3 (dBm) P1dB (dBm) 22 30 Frequency (MHz) Frequency (MHz) 80 34 90 100 110 1 0 0 10 20 30 40 50 60 70 110 Frequency (MHz) 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS120502 CGA-3318Z Pin 1 2, 3 Function RF IN GND 4 5 RF IN RF OUT/VCC 6, 7 8 EPAD GND RF OUT/VCC GND Description Device 1. RF input pin. This pin requires the use of an external DC-blocking capacitor as shown in the schematic. Connection to ground. Use via holes for best performance to reduce lead inductance as close to ground leads as possible. Device 2. RF input pin. This pin requires the use of an external DC-blocking capacitor as shown in the schematic. Device 2. RF output and bias pin. Bias should be supplied to this pin through an external series resistor and RF choke inductor. Because DC biasing is present on this pin, a DC-blocking capacitor should be used in most applications. The supply side of the bias network should be well bypassed. Same as pins 2 and 3. Device 1. Same as pin 5. Exposed area on the bottom side of the package must be soldered to the ground plane of the board for optimum thermal and RF performance. Several vias should be located under the EPAD as shown in the recommended land pattern. Device Pin Out 1 8 2 7 3 6 4 5 Suggested Pad Layout PCB Pad Layout Dimensions in inches [millimeters] Sized for 31 mil thick FR-4 DS120502 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. 9 of 10 CGA-3318Z Package Drawing and Marking Dimensions in inches (millimeters) Refer to drawing posted at www.rfmd.com for tolerances. Lot Code CGA3318 Lot Code CGA3318Z Tin-Lead Lead Free Ordering Information 10 of 10 Part Number Description Reel Size Devices/Reel CGA3318ZSB 5pcs Sample Bag N/A N/A CGA3318ZSQ 25pcs Sample Bag N/A N/A CGA3318ZSR Dual CATV Broadband HBT AMP 7" 100pcs CGA3318Z Dual CATV Broadband HBT AMP 7" 500pcs CGA3318ZPCK-410 50MHz to 870MHz Eval Bd & 5 Loose Pieces N/A N/A CGA3318ZPCK-411 5MHz to 100MHz Eval Bd & 5 Loose Pieces N/A N/A 7628 Thorndike Road, Greensboro, NC 27409-9421 * For sales or technical support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com. DS120502