Model A-105 Flush Diaphragm Pressure Transducer DESCRIPTION Model A-105 gage pressure transducers are manufactured with environments. Model A-105 has welded electrical connectors a unitized stainless steel diaphragm. The advantage of this type as an integral part of the transducer body and recommended of design is that a thin diaphragm and heavy sidewalls are made for applications involving rough handling or where an all-welded from one piece of stainless steel. This unitized diaphragm is rug- stainless steel transducer is required. ged, but at the same time can be made thin enough to measure low pressures. Available pressure ranges span from 100 psig to 15,000 psig. These models can be used in corrosive fluid FEATURES * 100 psig to 15000 psig range * Flush mount design * No dead volume * Miniature footprint * Stainless steel * CE approved All units have four (4) active bonded strain gages arranged in a Wheatstone-bridge configuration. Model A-105 PERFORMANCE SPECIFICATIONS RANGE CODES Characteristic Measure Range Code Available ranges Pressure ranges 100, 150, 200, 300, 500, 750, 1000, 1500, 2000, 3000, 5000, 7500, 10000, 15000 psig BR 100 psi CJ 150 psi CL 200 psi Accuracy6 0.5 % full scale Non-linearity and hysteresis 0.5 % full scale CP 300 psi Non-repeatability 0.1 % full scale CR 500 psi Output 2 mV/V nominal CT 750 psi Infinite CV 1000 psi DJ 1500 psi DL 2000 psi DN 3000 psi Resolution ENVIRONMENTAL SPECIFICATIONS Characteristic Measure DR 5000 psi Temperature, operating -54 C to 149 C [-65 F to 300 F] DT 7500 psi Temperature, compensated 16 C to 71 C [60 F to 160 F] DV 10000 psi Temperature effect, zero 0.01 % full scale/F EJ 15000 psi Temperature effect, span 0.02 % reading/F ELECTRICAL SPECIFICATIONS Characteristic Measure Strained gage type Bonded foil Excitation (calibration) 5 Vdc Excitation (acceptable) Up to 5 Vdc or (Vac) Insulation resistance 5000 mOhm @ 50 Vdc Bridge resistance 350 ohm Shunt calibration data Included Electrical termination (std) PTIH-10-6P or equivalent (hermetic) Mating connector (not incl.) PT06A-10-6S or equiv. (AA111) MECHANICAL SPECIFICATIONS Characteristic Measure Media Gases, liquids compatible with wetted parts Overload, safe 50 % over capacity Proof pressure 400 % (max. 25 k psi) Dead volume Flush diaphragm Wetted parts material 17-4 PH stainless steel Weight 2 oz Case material Stainless steel Installation See Model 355 2 Honeywell * Sensing and Control OPTION CODES Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture programs. Please see http://sensing.honeywell.com/ TMsensor-ship for updated listings. Pressure ranges 100, 150, 200, 300, 500, 750, 1000, 1500, 2000, 3000, 5000, 7500, 10000, 15000 psig Temperature compensation 1a. 60 F to 160 F 1b. 30 F to 130 F 1c. 0 F to 185 F 1d. -20 F to 130 F 1e. -20 F to 200 F Internal amplifiers 2u. Unamplified, mV/V output Pressure ports 5d. 7/16-20 UNF male 5p. M12 x 1.5 male Electrical termination 6a. Bendix PTIH-10-6P (or equivalent) 6 pin (max 250 F) 6e. Integral cable: Teflon (-65 F to 475 F) 6h. Integral cable: Silicone (-65 F to 300 F) 6i. Integral underwater cable: (max 180 F)1 6v. Phoenix connector on end of cable Special calibration3 9a. 10 point (5 up/5 down) 20 % increments @ 70 F 3 9b. 20 point (10 up/10 down) 10 % increments @ 70 F 3 Wetted diaphragm 10e. Iconel X-750 Shock and vibration 44a. Shock & vibration resistance 1f. 70 F to 250 F 1i. -65 F to 250 F 1g. 70 F to 325 F 1h. 70 F to 400 F Flush Diaphragm Pressure Transducer MOUNTING DIMENSIONS and characteristics TYPICAL SYSTEM DIAGRAM For reference only Wiring codes Connector Connector, unamplified A (+) excitation B (+) excitation C (-) excitation D (-) excitation E (-) output F (+) output Special requirements (consult factory) Have a special requirement? New case pressure, different cable lengths, electrical connectors, or materials? Consult our factory by calling +1 614-850-5000 (800-848-6564). Customization is key to our test and measurement business. Special outputs, wiring codes, and calibrations are all standard to us. Honeywell * Sensing and Control 3 Model A-105 NOTES Flush Diaphragm Pressure Transducer 1. Not available with option 1c. 2. G=Green; B=Blue; W=White; Bl=Black; Br=Brown; Y=Yellow; R=Red; O=Orange. Color specifying cable and number or letter specifying connector. 3. Availability varies with range. 4. No mating connector necessary with cable option. 5. Not available with temperatures below -29 C [-20 F] or above 85 C [185 F]. 6. Accuracies stated are expected for best-fit straight line for all errors, including linearity, hysteresis & non-repeatability thru zero. Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847 Email inquiries to info.sc@honeywell.com WARNING PERSONAL INJURY * DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * The information presented in this catalogue is for reference only. DO NOT USE this document as product installation information. * Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. Sensing and Control Automation and Control Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 USA +1-815-235-6847 www.honeywell.com/sensing 008617-1-EN IL50 GLO May 2008 Copyright (c) 2008 Honeywell International Inc. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Honeywell: 060-0287-13G 060-0287-15G 060-0287-07G 060-0287-17G