LSP05120P - Littelfuse - Datasheet.Live

Surge Protection Module

LED Lighting Surge Protection Module > LSP05G

Speciﬁcations are subject to change without notice.

Revised: 12/19/16

LSP05G Module Series

Agency Approvals

Applications

Additional Information

Description

Features

RoHS

• Maximum Discharge

Current (Imax) 10kA, 8/20µs

• Meets ANSI C136.2

Enhanced Level 10kV/5kA,

IEEE C62.41.2 Location

Category C Low Exposure

and US Dept. of Energy

MSSLC Model Spec.

• Thermally Protected

Varistor technology

• Parallel and Series

Connected SPD Options

• IP66 Water-proof

and Dust-proof

• UL1449 Recognized (120Vac,

240Vac and 277Vac only)

• Series- connected option for

240V and 277V is IEC 61643-

11 Test Class II and EN

61643-11 Type 2 compliant.

• Outdoor and Commercial

LED Lighting

• Roadway lighting

• Trafﬁc lighting

• Digital signage

• Wall wash lighting

• IEC CB Scheme

Certiﬁcate NL-37684

available for 240V and

NL-40516 for 277V

• Compact form factor

with mounting tabs

• 240Vac and 277Vac

are CE compliant and

available for Class I

and Class II installation

based on IEC luminaire

protection classes

• Series connected

– Varistor thermal

protection indication

by removal of power

to luminaire

• High line-to-earth/

ground resistance

• RohS compliant

• Parking garage lighting

• Flood lighting

• Tunnel lighting

• Street lighting

Datasheet SamplesResources

Absolute Maximum Ratings

• For ratings of individual members of a series, see Device Ratings and Speciﬁcations chart

CAUTION: Stresses above those listed in "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress only rating and operation of

the device at these or any other conditions above those indicated in the operational sections of this speciﬁcation is not implied.

LSP05G Series Units

Continous:

Max AC Voltage Range (VM(AC)RMS) 150 to 510 V

Continuous Current 5 A

Transient:

Maximum Discharge Current, 8/20μs Waveform (Imax) 10,000 A

Nominal Discharge Current, 8/20µs Waveform (In) 5,000 A

Operating Ambient Temperature Range (TA) -45 to +85 °C

Storage Temperature Range (TSTG) -45 to +90 °C

Isolation Voltage Capability (When the thermal disconnect opens) 600 V

Insulation Resistance >1,000 MΩ

Agency Standard Agency File Number

UL1449+

for 120V, 240V, 277V Only E320116

IEC 61643-11++ NL-37684 and NL-40516

+ = For 120V, 240V and 277V

++ = For 240V and 277V, respectively

Littelfuse’s LSP05G thermally protected Surge Protective

Device is a self-protected device specially designed to be

used in outdoor and commercial LED lighting ﬁxtures for

transient overvoltage protection. It has been developed with

Littelfuse’s thermally protected varistor technology. Its built-in

thermal disconnect function provides additional protection

to prevent catastrophic failure and ﬁre hazard even under

extreme circumstances of varistor end-of-life or sustaining

over voltage conditions. It also provides high line-to-earth/

ground resistance, facilitating faster production line testing.

LSP05G series connected option allows clear indication of

thermal fault protection by disconnecting power to luminaire,

thereby signaling SPD module replacement. The LSP05G

Surge Protective Device facilitates customer’s product

compliance to IEEE C62.41.2 Location Category C Low ANSI

C136.2 and US Dept. of Energy MSSLC Model Spec.

Surge Protection Module

LED Lighting Surge Protection Module > LSP05G

Speciﬁcations are subject to change without notice.

Revised: 12/19/16

* = S or P

† with 1500Vac Hi-Pot withstand capability in common mode (L-G and N-G)

Glossary:

1. MCOV/UC: Maximum Continuous Operating Voltage - maximum r.m.s. voltage that could be continuously applied to the SPD.

2. Maximum Discharge Current Imax (A): The maximum discharge current is a measure of the SPDs maximum capability; single impulse of discharge current uses the 8/20µs

current waveform.

3. Nominal Discharge Current In (A): The nominal discharge current is a measure of the SPDs endurance capability; 15 impulses of discharge current uses the 8/20µs current waveform.

4. MLV: UL1449 Measured limiting voltage; the highest value of residual voltage measurements during the application of impulses of 8/20µs nominal discharge current (In);

an average voltage value of 15 impulses

5. Up: IEC 61643-11 Voltage protection level; the highest value of residual voltage measurements during the application of impulses of 8/20µs nominal discharge current (In);

a rounding voltage value of maximum measurement.

6. Series module used in parallel connection for indication circuit connection.

7. LSP05G240S & LSP05G277S are certiﬁed by DEKRA with below IEC 61643-11 speciﬁcations

LSP05G Series Device Ratings & Speciﬁcations

Part Number Operating

Voltage (VAC)

MCOV/UC1

(VAC)

Maximum

Discharge

Current2

Imax (A)

Nominal

Discharge

Current3

In (A)

Typical

MLV4

(V)

Typical

(V)

Safety Compliance

IEC/EN 61643-116 & 7 UL1449

LSP05G120* 120 150 10,000 5,000

L-N:600

L-G:1410

N-G:1410

L-N:700

L-G:1600

N-G:1600

LSP05G240* 240 275 10,000 5,000

L-N:970

L-G:1410

N-G:1410

L-N:1100

L-G:1600

N-G:1600

X X

LSP05G277* 277 320 10,000 5,000

L-N: 1130

L-G: 1410

N-G:1410

L-N: 1200

L-G: 1600

N-G:1600

X X

LSP05G347* 347 420 10,000 5,000

L-N: 1530

L-G: 1550

N-G: 1410

L-N: 1600

L-G: 1700

N-G: 1600

LSP05G480* 480 510 10,000 5,000

L-N: 1800

L-G: 1900

N-G: 1410

L-N: 2100

L-G: 2000

N-G: 1600

LSP05G480*H†480 510 10,000 5,000

L-N: 1800

L-G: 3090

N-G: 3090

L-N: 2100

L-G: 3700

N-G: 3700

LSP05G240S Speciﬁcation Parameter Value Unit Condition

Temporary overvoltage TOV UT337 V LV system fault 255 V x 1.32 at tT = 5 s, TN power grid

Temporary overvoltage TOV UT442 V LV system fault 255 V x 1.732 at tT = 120 min, TN power grid

Power grids TN

Backup fuse 16 A max., gG fuse

End of life indication yes Optical, light ON: SPD is functional

Light OFF: SPD has reached end-of-life

Max earth leakage current at Uc 50 µA Max. rms, to GND

LSP05G277S Speciﬁcation Parameter Value Unit Condition

Temporary overvoltage TOV UT403 V LV system fault 305 V x 1.32 at tT = 5 s, TN power grid

Temporary overvoltage TOV UT529 V LV system fault 305 V x 1.732 at tT = 120 min, TN power grid

Power grids TN

Backup fuse 20 A max., gG fuse

End of life indication yes Optical, light ON: SPD is functional

Light OFF: SPD has reached end-of-life

Surge Protection Module

LED Lighting Surge Protection Module > LSP05G

Speciﬁcations are subject to change without notice.

Revised: 12/19/16

Dimensions

Series Version

Parallel Version

Notes:

1. Black: Line; White: Neutral; Green: Ground.

(P/N with sufﬁx X3333/X3316: Brown: Line; Blue: Neutral;

Green-Yellow stripe: Ground)

2. Wire Gauge: AWG16, wire length: 100mm±20mm, wire stripping length:10±2mm.

3. Caution: Line/neutral wires must be correctly connected to AC power grid. Wiring

error on line/neutral polarity may cause module failure.

Repetitive Surge Capability

104

105

106

∞

103

102

10 100 1,000 10,000

IMPULSE DURATION (μs)

100,000

10,000

100

SURGE CURRENT (A)

MODEL SIZE = 20mm

130 to 625V M(AC) RATING

TA = -55oC TO 85oC

1,000

Pulse Rating

(8x20µSec)

Strikes Surge

1 10,000A

2 7,000A

15 5,000A

100 1,500A

1,000 700A

Surge Protection Module

LED Lighting Surge Protection Module > LSP05G

Speciﬁcations are subject to change without notice.

Revised: 12/19/16

Part Numbering System

LSP 05G 120 P N H Xxxxx

Littelfuse Surge Protection Module

5kA (Nominal Discharge Current)

Operating Voltage

P: Parallel connection

S: Series connection

Blank: Waterproof IP66

N: Non-waterproof

Blank: No Hi-Pot withstand capability in

common mode

H: With 1500Vac Hi-Pot withstand

capability in common mode (L-G and N-G)

X3316: without GND wire connection,

available for 240Vac and 277Vac rating

with CE Marking for Class II

unearthed luminaire installation

Wire Color: Line: Brown, Neutral: Blue

X3379: Input wire length:

110mm +/-10mm,

output wire length: 210mm+/-10mm

Product is CE Marked for Class I earthed

Luminaire installation and Class II

unearthed Luminaire installation (if earth

connection is not utilized).

Other Options:

X3333: with GND wire connection, avail-

able for 240Vac and 277Vac rating with

CE Marking for Class I

earthed luminaire installation

Wire Color: Line: Brown, Neutral: Blue,

Ground/P: Green with yellow stripe

Application/Installation Schematic

SPD

N/G

AC/DC

Power

Supply LED Module

Parallel Connection

SPD

N/G

LED Module

LED normally on

Parallel Connection

With LED indicating SPD status

- ON (green): SPD is online

- OFF: SPD needs replacement

LSP10xxxS

AC/DC

Power

Supply

SPD

LED Module

Parallel Connection

(for Class II Unearthed)

AC/DC

Power

Supply

~X3316

SPD

LED Module

Series Connection

(for Class II Unearthed)

~X3316

AC/DC

Power

Supply

SPD

N/G

LED Module

Series Connection

Notes:

1. Series module used in parallel connection for indication circuit connection.

2. LED indicator and associated circuitry are not included in the module.

3. Black wire is AC line voltage (hot); white wire is AC neutral voltage.

4. Black wire voltage is cut off when SPD needs replacement.

5. R is current limiting resistor; it resistance/wattage is determined by AC line voltage and desired current driving LED. Example: AC line voltage 240V, LED: 1.6mA, resistor:150Kohm/0.5W.

LSP05GxxxS

LSP05GxxxP

SPD

N/G

AC/DC

Power

Supply LED Module

Parallel Connection

SPD

N/G

LED Module

LED normally on

Parallel Connection

With LED indicating SPD status

- ON (green): SPD is online

- OFF: SPD needs replacement

LSP10xxxS

AC/DC

Power

Supply

SPD

LED Module

Parallel Connection

(for Class II Unearthed)

AC/DC

Power

Supply

~X3316

SPD

LED Module

Series Connection

(for Class II Unearthed)

~X3316

AC/DC

Power

Supply

SPD

N/G

LED Module

Series Connection

AC/DC

Power

Supply

LSP05GxxxS

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Littelfuse:

LSP05G277PX3333 LSP05G277PX3316 LSP05G240PX3333 LSP05G240PX3316 LSP05G277SX3333

LSP05G277SX3316 LSP05G240SX3316 LSP05G240SX3333 LSP05G240S LSP05G277S LSP05G240P

LSP05G277P LSP05G347P LSP05G347S LSP05G277SN LSP05G480P LSP05G120S LSP05G120P

LSP05G277PN LSP05G480PN LSP05G277PH LSP05G277PL250 LSP05G480SN LSP05G480PH LSP05G120PN

LSP05G120SN LSP05G240SH LSP05G480PNH LSP05G120SH LSP05G347PN LSP05G480SNH LSP05G240PN

LSP05G347SN LSP05G240PH LSP05G480SH LSP05G240SN