GENERAL-USE RECTIFIER DIODE U15 OUTLINE DRAWING Unit in mm(inch) Color of cathode band U15B (100V) U15C (200V) U15E (400V) U15G (600V) U15J (800V) 7.0MAX (0.28) 1.2 (0.05) Yellow Black Blue Red Green 28MIN. (1.1) Type 62MIN. (2.44) 28MIN. (1.1) Direction of polarity Cathode band * For general purpose. * Diffused-junction. Glass passivated and encapsulated. 5 MAX (0.2) FEATURES Weight: 1.0 (g) ABSOLUTE MAXIMUM RATINGS Item Type U15B U15C U15E U15G U15J Repetitive Peak Reverse Voltage VRRM V 100 200 400 600 800 Non-Repetitive Peak Reverse Voltage VRSM V 200 300 500 800 1000 Average Forward Current IF(AV) A Surge(Non-Repetitive) Forward Current IFSM A I2t Limit Value I2t A2s Operating Junction Temperature Tj C -65 ~ +175 Tstg C -65 ~ +200 Storage Temperature Notes 3.0 half sine wave 180 conduction (Single-phase ) TL = 100C, Lead length = 10mm 80 60 (Without PIV, 10ms conduction, Tj=175C start) 25.6 14.4 (Time=2~10ms,I=RMS value) (1) Lead mounting : Lead temperature 300C max. to 3.2mm from body for 5sec. max.. (2) Mechanical strength : Bending 90x2 cycles or 180x1 cycle, Tensile 3kg, Twist 90x1 cycle. CHARACTERISTICS(TL=25C) Item Symbols Units Min. Typ. Max. 1.5 60 B,C class Test Conditions 0.6 10 E,G,J class Peak Reverse Current IRRM A - Peak Forward Voltage VFM V - - 1.0 IFM=3.0Ap, Single-phase half sine wave 1 cycle trr s - 3.0 - IF=2mA, VR=-15V Rth(j-a) C/W - - Reverse Recovery Time Steady State Thermal Impedance Rth(j-l) 50 20 Rated VRRM Lead length = 10 mm PDE-U15-0 U15 Max. average forward power dissipation (Resistive or inductive load) 100 PEAK FORWARD CURRENT (A) Single-phase half sine wave Conduction : 10ms 1 Cycle 10 TL=175C TL=25C 1 0.1 0 1 2 3 4 5 MAX. AVERAGE FORWARD POWER DISSIPATION (W) Forward characteristic 4.0 DC Single-phase ( 50Hz ) 3.0 2.0 1.0 0 0 1.0 PEAK FORWARD VOLTAGE DROP (V) 200 5.0 150 Lead length L=10mm 20mm 25mm 100 FIN:Cu(35 *1t) L 50 L Rth(f-a)=5.5 C/W 0 1.0 2.0 3.0 Single-phase half sine wave 180 conduction (50Hz) 150 100 L L 50 Lead temp 0 4.0 Lead length L=10mm 20mm 25mm 0 PC board (100x180x1.6t) Copper foil ( 5.5) 1.0 AVERAGE FORWARD CURRENT (A) 2.0 3.0 4.0 AVERAGE FORWARD CURRENT (A) Surge forward current characteristic (Non-repetitive) Steady state thermal impedance 120 10ms 100 1 cycle 80 Without PIV 60 With PIV 40 20 1 10 CYCLES 100 Ambient temp. measured point Lead temp. Lead measured poin length (0.5 thermocouple) 2 Copper foil ( 5.5) 100 15 STEADY STATE THERMAL IMPEDANCE (C/W) Surge current peak value 20 120 SURGE FORWARD CURRENT (A) 4.0 200 Single-phase half sine wave 180 conduction (50Hz) 0 3.0 Max. allowable lead temperature (Resistive or inductive load) MAX. ALLOWABLE LEAD TEMPERATURE (C) MAX. ALLOWABLE AMBIENT TEMPERATURE (C) Max. allowable ambient temperature (Resistive or inductive load) 0 2.0 AVERAGE FORWARD CURRENT (A) Lead length 80 PC board (100x180x1.6t) Rth(j - a) 60 Rth(j - l) 40 20 0 0 5 10 15 20 25 30 LEAD LENGTH (mm) PDE-U15-0 U15 Transient thermal impedance TRANSIENT THERMAL IMPEDANCE (C/W) 100 Rth(j - a) Lead length = 10 mm Rth(j - l) 10 1 Note : PC. board mounted PC. board( 100 x 180 x 1.6t) Copper foil ( 5.5 ) 0.1 0.001 0.01 0.1 1 10 100 TIME (s) Reverse recovery time(trr) test circuit 50F - 15V 22s D.U.T 2mA 15V 0 600 t 0.1Irp Irp trr PDE-U15-0 HITACHI POWER SEMICONDUCTORS Notices 1.The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are adviced to contact Hitachi sales department for the latest version of this data sheets. 2.Please be sure to read "Precautions for Safe Use and Notices" in the individual brochure before use. 3.In cases where extremely high reliability is required(such as use in nuclear power control, aerospace and aviation, traffic equipment, life-support-related medical equipment, fuel control equipment and various kinds of safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users' fail-safe precautions or other arrangement. Or consult Hitachi's sales department staff. 4.In no event shall Hitachi be liable for any damages that may result from an accident or any other cause during operation of the user's units according to this data sheets. Hitachi assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in this data sheets. 5.In no event shall Hitachi be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 6.No license is granted by this data sheets under any patents or other rights of any third party or Hitachi, Ltd. 7.This data sheets may not be reproduced or duplicated, in any form, in whole or in part , without the expressed written permission of Hitachi, Ltd. 8.The products (technologies) described in this data sheets are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety not are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. For inquiries relating to the products, please contact nearest overseas representatives which is located "Inquiry" portion on the top page of a home page. Hitachi power semiconductor home page address http://www.hitachi.co.jp/pse