3.2x1.6 mm SMD CHIP LED LAMP APK3216SECK-F01 Features z3.2mmx1.6mm zLOW Description SMT LED, 1.1mm THICKNESS. POWER CONSUMPTION. zWIDE zIDEAL The Super Bright Orange source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. FOR BACK LIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE z RoHS SUPER BRIGHT ORANGE : 2000PCS / REEL. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF1365 REV NO: V.1 DATE: MAR/29/2005 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000173-01 Selection Guide Part No. Dice APK3216SECK-F01 Iv (mcd) @ 20mA Lens Type SUPER BRIGHT ORANGE (InGaAlP) Viewing Angle Min. Typ. 21/2 70 250 90 WATER CLEAR Note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Orange D Dominant Wavelength 1/2 Max. Units Test Conditions 610 nm IF=20mA Super Bright Orange 601 nm IF=20mA Spectral Line Half-width Super Bright Orange 29 nm IF=20mA C Capacitance Super Bright Orange 15 pF VF=0V;f=1MHz VF Forward Voltage Super Bright Orange 2.1 2.5 V IF=20mA IR Reverse Current Super Bright Orange 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Super Bright Orange Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 195 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF1365 REV NO: V.1 DATE: MAR/29/2005 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000173-01 Super Bright Orange APK3216SECK-F01 SPEC NO: DSAF1365 REV NO: V.1 DATE: MAR/29/2005 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000173-01 APK3216SECK-F01 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF1365 REV NO: V.1 DATE: MAR/29/2005 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.H.CHEN ERP:1204000173-01