SPECIFICATION CONTROL DRAWING
DuraSeal is a trademark of Tyco Electronics Corporation.
=
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A. Raychem
TITLE: DURASEAL FORK
TERMINAL
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets] DOCUMENT NO.: B-106-2XXX
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application. REV.: A DATE: 17-Jul-06
DRAWN BY:
M. FORONDA CAGE CODE:
06090 REPLACES:
D030370 DCR NUMBER:
D060177 SCALE: ---- SIZE: A SHEET: 1 of 1
© 2006 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Dimensions Wire Dimensions øG
Product
Name øA
min B
nom C
nom L
max Color (1) Size Range
mm2 (AWG) min max
B-106-2401 4.0
[0.160] 4.3
[0.169] 8.0
[0.315] 32.0
[1.260] Red 0.5 - 1.0
(AWG 22-18) 1.4
[.055] 4.0
[.160]
B-106-2402 4.6
[0.180] 4.3
[0.169] 8.0
[0.315] 35.0
[1.378] Blue 1.5 - 2.5
(AWG 16-14) 2.0
[.080] 4.6
[.180]
B-106-2502 4.6
[0.180] 5.3
[0.207] 10.0
[0.394] 35.0
[1.378] Blue 1.5 - 2.5
(AWG 16-14) 2.0
[.080] 4.6
[.180]
B-106-2403 6.5
[0.255] 4.3
[0.169] 8.0
[0.315] 38.0
[1.496] Yellow 3.0 – 6.0
(AWG 12-10) 2.8
[.110] 6.5
[.255]
B-106-2503 6.5
[0.255] 5.3
[0.207] 10.0
[0.394] 40.0
[1.575] Yellow 3.0 – 6.0
(AWG 12-10) 2.8
[.110] 6.5
[.255]
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with
thermoplastic adhesive coating inside.
2. FORK TERMINAL: Tin-plated copper alloy.
BASE METAL: C110 Copper
PLATING: Tin-plated per ASTM B545, Class A.
APPLICATION
1. These controlled crimp devices are designed to terminate a tin-plated or bare copper stranded wire having an insulation rated
for at least 75°C to a fork terminal. It will provide a splash proof and strain relief connection.
UL listed wire connection 91J4.
2. Temperature range: -55°C to +125°C.
3. For application tooling and installation, see RPIP-684-00.
For best results, prepare the wire as shown:
