RECOMMENDED PCB PAD LAYOUT TOP VIEW SCHEMATIC FRONT VIEW Notes: Cooper Electronic Technologies 1) Tolerances +/- .005" unless otherwise specified. 2) Stamping: Stamp unit on top of core as shown Line 1 UP2 ; line 2 Inductance (per family table chart ). 3) RoHS Compliant 3601 Quantum Boulevard, Boynton Beach FL. 33426 UniPac2 SMT Inductor Line FINISHED ASSEMBLY/FAMILY TABLE. SIZE A Drawing Number: Revision Level: J UP2-R Inductor Line Sheet 3 of 45 UniPac2 Family Table PN UP2-R47-R *UP2-1R0-R UP2-1R5-R *UP2-2R2-R UP2-3R3-R *UP2-4R7-R UP2-6R8-R **UP2-8R2-R *UP2-100-R *UP2-150-R *UP2-220-R *UP2-330-R *UP2-470-R UP2-680-R **UP2-820-R UP2-101-R UP2-151-R UP2-221-R UP2-331-R **UP2-471-R Customer Information Rated OCL Inductance nominal +/-20% H H Note(1) .47 .595 1.0 1.00 1.5 1.46 2.2 2.39 3.3 3.3*** 4.7 4.77 6.8 6.63 8.2 8.71 10 9.73 15 15.43 22 22.50 33 33.13 47 48.65 68 68.17 82 85.60 100 102.60 150 152.70 220 230.00 330 338.00 471 471.8 I rms Amperes Note(2) 10.1 9.0 8.1 6.9 6.5 5.7 5.0 4.7 4.3 3.6 2.9 2.4 1.9 1.7 1.5 1.4 1.1 .93 .76 .55 Isat Amperes Note(3) DCR ohms () maximum. @ 20C. 11.4 9.9 7.9 6.1 5.1 4.2 3.6 3.2 3.3 2.4 2.0 1.7 1.4 1.2 1.0 .95 .78 .62 .51 .44 .0049 .0081 .0103 .0115 .0138 .0173 .0230 .0245 .0299 .0449 .0644 .0989 .1461 .1898 .2473 .2772 .4244 .6360 .9775 1.31 Part number definition: First 3 characters = Product code and size. Last 3 characters = Inductance in H. R=decimal point. If no R is present third character = # of zeros. Part Numbers that are *BOLDED are stocked standard product. All others are not stocked but available upon request. Part Numbers that are **BOLDED are Non-catalog and non-stocked product but are available upon request. Notes: Cooper Electronic Technologies (1) Test parameters: 0.250Vrms, 100KHz, and 0.0Adc. (2) Rms current for a T of 40C. at an ambient temeperature of 85C.. (3) Peak current for approximateley a 10% rolloff. (4) Units supplied in tape and reel (600 units per 13" reel) packaging. EIA481 compliant. (5) OCL= Open circuit inductance . (6) Hipot: winding to core 300Vdc min. (7) *** UP2-3R3 to be tested to meet 3.3uH +/-20% 3601 Quantum Boulevard,Boynton Boulevard,FL 33426 UniPac2 SMT Inductor Line FINISHED ASSEMBLY/ FAMILY TABLE. SIZE Drawing Number: A Revision Level: J UP2-R Inductor Line Sheet 5 of 45