7 8 THIS DRAWING IS UNPUBLISHED. C COPYRIGHT 20 RELEASED FOR PUBLICATION 6 5 4 3 2 20 LOC - REVISIONS DIST CM ALL RIGHTS RESERVED. 1 00 P LTR DESCRIPTION DATE REVISED PER ECO-13-008064 E DWN APVD DZ 13MAY2013 YHM G W 2 2.87 [ .113 ] D 1 POST WITHSTAND 13 NEWTONS (3 LBS) MIN AXIAL FORCE IN DIRECTION SHOWN WITHOUT DISLODGING. 2 MEASURED AT -A- . D 3. PARTS COMPLY WITH SOLDERABILITY SPEC 109-11-2/12. 4 MATERIAL: HEADER -PBT GLASS FILLED. POST - COPPER ALLOY. MATERIAL:-2 THRU -12 (93/7) TIN-LEAD PLATED. -32 THRU -42 MATTE 100% TIN PLATED. 5 COORDINATE DIMENSION APPLIES FROM CENTER OF ACTUAL FEATURE. 6 POSTS TO BE MEASURED WHEN STRIP HELD FLAT. 6.35 [ .250 ] 10 0.25 / 25.4 [.010 /1.000] (L) 7. DIMENSIONS IN BRACKETS ARE IN INCHES. 0.05[.002] ALL POSTS 0.25 [.010] m ALL POSTS A 0.64 -1.01 [ .025 -.040 ] C 1 2 6 B 0.25[.010] 0.20[.008] m 0.05[.002] 8.81 0.25 [ .347 .010 ] ( 3.43 ) [ .135 ] 1 A A 9 ONE HOLE MAY BE UNDERSIZED 0.81-0.89 [,032-.035] DIAMETER FOR ASSEMBLY RETENTION DURING PROCESSING. 10 TE LOGO,UL,AND CSA TRADEMARKS TO APPEAR ON THIS SURFACE. 11 2 CIRCUIT PARTS HAVE ONE RETENTION PEG, ALL OTHERS HAVE TWO. MOUNTING HOLE PATTERN REFLECTS A PART WITH TWO PEGS. 12 OBSOLETE PARTS: OBSOLETE CIS STREAMLINING PER D.RENAUD/D.SINISI POST NO 1 -A- 6 TOLERANCES APPLY TO SOLDER SIDE OF BOARD. C 7.37 0.25 [ .290 .010 ] 0.64 # 0.03 [.025 # .001] SQUARE TYP 8 2.54 [ .100 ] 13.97 [ .550 0.25 .010 ] 1.78 [ .070 ] 3.18 [ .125 ] 7.62 [.300] 12.70 [.500] 30.48 [ 1.200 ] 12 4-647609-2 - 7.62 [.300] 25.40 [ 1.000 ] 10 4-647609-0 - - TYP 5 1.27 [ .050 ] - - 1.78 MIN [ .070 ] 12 12 12 [ .400 ] - 5.08 [ .200 ] 3-647609-4 2 3-647609-2 7.62 [.300] 12.70 [.500] 30.48 [ 1.200 ] 12 SUPERCEDED BY 4-647609-0 - 7.62 [.300] 25.40 [ 1.000 ] 10 SUPERCEDED BY 4-647609-1 SUPERCEDED BY 3-647609-9 12 SUPERCEDED BY 3-647609-7 - 10.16 [.400] - - - - - - 10.16 - 5.08 [ .200 ] - - W G - DIMENSIONS: mm[INCHES] MATERIAL - TOLERANCES UNLESS OTHERWISE SPECIFIED: FINISH 4 0.13[.005] 0 $ 30' 0 PLC 1 PLC 2 PLC 3 PLC 4 PLC ANGLES - 4 7.62 [ .300 ] DWN 27AUG2002 CHK 27AUG2002 APVD 27AUG2002 K. WHITAKER D. BOSSI D. BOSSI NAME - APPLICATION SPEC WEIGHT SIZE - CUSTOMER DRAWING 647609-7 647609-6 647609-5 4 647609-4 2 647609-2 3 647609-3 NO OF POSN PART NO A TE Connectivity PRODUCT SPEC - 647609-8 5 [ .400 ] L 647609-9 6 [ .500 ] - 1-647609-0 7 [ .600 ] 12.70 1-647609-1 8 [ .700 ] 15.24 1-647609-2 9 [ .800 ] 17.78 3-647609-3 11 [ .900 ] 20.32 - 3 [ 1.100 ] 22.86 2.54 [.100] - 8 27.94 5.08 [.200] - SUPERCEDED BY 3-647609-2 7.62 [ .300 ] 3-647609-5 4 SUPERCEDED BY 4-647609-2 - THIS DRAWING IS A CONTROLLED DOCUMENT. RECOMMENDED MOUNTING HOLE PATTERN FOR 1.57 # 0.20[.062 # .008] THICK P.C. BOARD SCALE 10:1 4805 (3/11) 10.16 MTA-100 HEADER ASSY, FRICTION LOCK,.025 SQUARE, STRAIGHT POST,TIN PLATED CAGE CODE A1 00779 DRAWING NO 647609 SCALE B 3-647609-6 5 - 2.29 [ .090 ] 1.02 0.07 [ .040 .003 ] [ .500 ] - 3-647609-7 6 [ .600 ] 12.70 3-647609-8 7 - 12 12 - 3-647609-9 8 [ .700 ] 15.24 4-647609-1 9 [ .800 ] 17.78 - 11 [ .900 ] 20.32 - - [ 1.100 ] 22.86 2.54 [.100] - 1.32 0.05 [ .052 .002 ] 27.94 5.08 [.200] - 2.54 TYP [ .100 ] A 10.16 [.400] 5:1 SHEET RESTRICTED TO 1 OF - 1 REV E Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TE Connectivity: 3-647609-2