Bulletin I20207 rev. C 03/04 80PF(R)...(W) SERIES Stud Version STANDARD RECOVERY DIODES GEN II DO5 Features High surge current capability Designed for a wide range of applications 80 A Stud cathode and stud anode version Leaded version available/ wire version available Low thermal resistance UL approval pending 80PF(R)... Typical Applications Battery charges Converters Power supplies Machine tool controls Welding Major Ratings and Characteristics 80PF (R)...(W) Parameters IF(AV) A 140 C 126 A @ 50Hz 1500 A @ 60Hz 1570 @ 50Hz 11250 @ 60Hz 10230 IF(RMS) 2 It Units 80 @ TC IFSM 40 to 120 80PF(R)...W A2s VRRM range 400 to 1200 V TJ range - 55 to 180 C www.irf.com case style DO-203AB (DO-5) case style DO-203AB (DO-5) 1 80PF(R)...(W) Series Bulletin I20207 rev. C 03/04 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code VRRM, maximum repetitive peak reverse voltage V VRSM, maximum nonrepetitive peak reverse voltage V 40 400 500 80PF (R)...(W) 80 800 960 120 1200 1440 IRRM max. @ TJ = 150C mA 9 Forward Conduction Parameter I F(AV) Max. average forward current @ Case temperature 80PF(R)...(W) 40 to 120 Units Conditions 80 140 A C I F(RMS) Max. RMS forward current 126 A I FSM Max. peak, one-cycle forward, 1500 t = 10ms non-repetitive surge current 1570 t = 8.3 ms reapplied t = 10ms 100% VRRM 1260 I 2t Maximum I2t for fusing A 1320 t = 8.3 ms reapplied t = 10ms No voltage 10230 t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied A2s 7200 Maximum I2t for fusing V F(TO) Low level value of threshold voltage 2 rf Low level value of forward V FM Max. forward voltage drop slope resistance No voltage 11250 7950 I 2 t 180 conduction, half sine wave Sinusoidal half wave, Initial TJ = 150C 112500 A2s t = 0.1 to 10ms, no voltage reapplied 0.73 V (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 3.0 m (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 1.40 V Ipk= 220A, TJ = 25C, tp = 400s rectangular wave www.irf.com 80PF(R)...(W) Series Bulletin I20207 rev. C 03/04 Thermal and Mechanical Specifications 80PF (R)...(W) 40 to 120 Parameter TJ Max. junction operating temperature range -55 to 180 Tstg Max. storage temperature range -55 to 180 RthJC Max. thermal resistance, junction to case RthCS Max. thermal resistance, case to heatsink T Max. allowed mounting torque 10% wt Units Conditions C 0.30 DC operation K/W 0.25 Approximate weight Case style Mounting surface, smooth, flat and greased 2.3 / 3.4 Nm 20 / 30 lbf * in 3.2 / 4.3 Nm 28 / 38 lbf * in 15.8 (0.56) g (oz) Tighting on nut (1) Tighting on Hexagon (2) DO-203AB (DO5) See Outline Table (1) As general recommendation we suggest to tight on Hexagon and not on nut (2) Torque must be appliable only to Hexagon and not to plastic structure RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Sinusoidal conduction Rectangular conduction 180 0.14 0.10 120 0.16 0.17 90 0.21 0.22 60 0.30 0.31 30 0.50 0.50 180 80PF(R) Serie RthJC = 0.3 K/W 170 160 Conduction Angle 150 140 180 120 130 90 120 30 60 110 0 10 20 30 40 50 60 70 80 90 Units Conditions TJ = TJ max. K/W Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) Conduction angle 180 80PF(R) Series RthJC (DC) = 0.3 K/W 170 160 Conduction Period 150 30 140 60 90 130 120 180 DC 120 0 20 40 60 80 100 120 140 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics www.irf.com 3 80PF(R)...(W) Series 140 90 /W 3K 40 5 K/W Conduction Angle 60 K/W 60 20 K/W /W 0.3 RMS Limit W 2K K/ 1.5 W 80 1K K/ 100 7 120 90 60 30 120 0.5 180 0. Maximum Allowable Forward Power Loss (W) Bulletin I20207 rev. C 03/04 /W 80PF(R) Series Tj = 180C 0 0 0 10 20 30 40 50 60 70 80 Average Forward Current (A) 30 120 150 180 Maximum Allowable Ambient Temperature (C) 140 20 K/W Conduction Period 60 90 K/W /W 3K 40 0.3 30 60 RMS Limit W 2K W 1.5 K/ 80 /W K/ 7 1K 120 90 60 100 0.5 DC 180 120 0. Maximum Allowable Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics /W 5 K/W 80PF(R) Series Tj = 180C 0 0 20 40 60 80 0 100 120 140 Average Forward Current (A) 30 120 150 180 Maximum Allowable Ambient Temperature (C) Fig. 4 - Forward Power Loss Characteristics 4 www.irf.com 80PF(R)...(W) Series 1400 At Any Rated Load Condition And With 1300 Rated Vrrm Applied Following Surge. 1200 Initial Tj = 150C @ 60 Hz 0.0083 s 1100 @ 50 Hz 0.0100 s 1000 900 800 700 600 80PF(R) Series 500 400 1 10 Peak Haf Sine Wave Forward Current (A) Peak Haf Sine Wave Forward Current (A) Bulletin I20207 rev. C 03/04 100 1600 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. 1400 Initial Tj = 150C No Voltage Reapplied 1200 Rated Vrrm Reapplied 1000 800 600 400 200 0.01 Tj = 25C Tj = 180C 80PF(R) Series 1 0 1 2 3 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics www.irf.com Transient Thermal Impedance Z thJC (K/W) Instantaneous Forward Current (A) 10 1 Fig. 6 - Maximum Non -Repetitive Surge Current Fig. 5 - Maximum Non -Repetitive Surge Current 100 0.1 Pulse Train Duration (s) Number Of Equal Amplitude Half Cycle Current Pulses (N) 1000 80PF(R) Series 1 Steady State Value RthJC = 0.3 K/W (DC Operation) 0.1 80PF(R) Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 5 80PF(R)...(W) Series Bulletin I20207 rev. C 03/04 Outline Table Fig. A - 80PF (R)... Case Style DO-203AB (DO-5) Note: For Metric device please contact Factory Fig. C - 82PF (R)... Case Style DO-203AB (DO-5) Note: For Metric device please contact Factory Fig. B - 80PF (R)...(W) Case Style DO-203AB (DO-5) Note: For Metric device please contact Factory 6 www.irf.com 80PF(R)...(W) Series Bulletin I20207 rev. C 03/04 Ordering Information Table Device Code 1 - 80 82 80 PF R 120 W 1 2 3 4 5 = Standard device = Isolated lead on standard terminal with silicone sleeve available for 1200V only (Red = Reverse Polarity) (Blue = Normal Polarity) 2 3 - PF = Plastic Package - None = Stud Normal Polarity (Cathode to Stud) 4 - Voltage code: Code x 10 = VRRM (See Voltage Ratings table) 5 - None = Standard terminal (see Fig. A) - W = Wire terminal (see Fig. B) R = Stud Reverse Polarity (Anode to Stud) Data and specifications subject to change without notice. This product has been designed and qualified for Multiple Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 03/04 www.irf.com 7