DA12-M Series Data Sheet
WORLDWIDE OFFICES
Americas
2900 South Diablo Way
Suite B100
Tempe, AZ 85282, USA
+1 888 412 7832
Europe (UK)
Ground Floor Offices, Barberry House
4 Harbour Buildings, Waterfront West
Brierley Hill, West Midlands
DY5 1LN, UK
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
For more information: www.artesyn.com
For support: productsupport.ep@artesyn.com
Artesyn Embedded Technologies, Artesyn Embedded Power, Artesyn, and all Artesyn related logos are
trademarks and service marks of Artesyn Embedded Technologies, Inc. All other names and logos referred to are
trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject to
change without notice. © 2019 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and
conditions, please visit www.artesyn.com/legal.
www.artesyn.com
DA12-M Series-DS 05Dec2019
Ordering Information - DA12 Adapter
Model Number Maximum Power Output Voltage Minimum Load Maximum Load Regulation2Ripple P/P
(PARD)3
DA12-120US-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV
DA12-120EU-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV
DA12-120UK-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV
DA12-120AU-M 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV
DA12-120MP-M* 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV
DA12-120MP-M2.1** 12 W 12.0 V 0.2 A 1.0 A ± 5% 120 mV
DA12-050US-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV4
DA12-050EU-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV4
DA12-050UK-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV4
DA12-050AU-M 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV4
DA12-050MP-M* 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV4
DA12-050MP-M2.1** 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV4
DA12-050MP-M402*** 10 W 5.0 V 0.2 A 2.0 A ± 5% 50 mV
* Interchangeable version - AC Plugs must be purchased separately to be used with DA12-120MP-M and DA12-050MP-M
** 2.1 mm x 5.5 mm barrel plug
*** μ USB Connector
Ordering Information - DA12 Interchangeable Plug
Model Number
DA-US DA-C8
DA-EU DA-JP
DA-UK DA-CH
DA-AU DA-KR
DA-All (Includes DA-US, DA-EU, DA-UK, and DA-AU)
1. Peak current lasting < 30 seconds with a maximum 10% duty cycle.
2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 mHz bandwidth and 10 μF in parallel with a 0.1 μF capacitor at rated line voltage and load ranges.
4. DA12-050XX model power supplies will operate with no-load, However under 0.1A Load Output ripple will exceed 50mV.