https://www.phoenixcontact.com/us/products/1619929 Device connector, front mounting - CA-07S1NA22S00 - 1619929 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Device connector for front wall, straight, shielded: yes, SPEEDCON locking, M23, Number of positions: 7, Type of contact: Socket, Solder-in connection, Flat gasket, 4x O3.2, Flange dimensions: 25 mm x 25 mm The figure shows the 6-pos. product version Key Commercial Data Packing unit 1 pc Custom tariff number 85366990 Country of origin Germany Technical data Temperature range Ambient temperature (operation) -40 C ... 125 C Dimensions free solder pin length 10 mm Data of the insulating body Coding N Insulator material PBT Contact material CuZn Contact surface material Ni/Au Contact connection method Solder-in connection Type of contacts Socket Number of positions 7 Contact diameter of power contacts 2 mm Nominal current per power contact at 25C 20 A Nominal voltage, power contact 300 V Overvoltage category II 04/01/2016 Page 1 / 4 https://www.phoenixcontact.com/us/products/1619929 Device connector, front mounting - CA-07S1NA22S00 - 1619929 Technical data Data of the insulating body Degree of pollution 3 Housing data Housing material CuZN Flange dimensions 25 mm x 25 mm Type of locking SPEEDCON locking Degree of protection (when plugged in) IP67 Thread type M23 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440103 ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002635 ETIM 5.0 EC002061 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 43172015 UNSPSC 12.01 43201404 UNSPSC 13.2 43201404 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / cULus Recognized 04/01/2016 Page 2 / 4 https://www.phoenixcontact.com/us/products/1619929 Device connector, front mounting - CA-07S1NA22S00 - 1619929 Approvals Ex Approvals Approvals submitted Approval details UL Recognized mm/AWG/kcmil 14 Nominal current IN 20 A Nominal voltage UN 300 V cUL Recognized mm/AWG/kcmil 14 Nominal current IN 10 A Nominal voltage UN 300 V EAC cULus Recognized Drawings 04/01/2016 Page 3 / 4 https://www.phoenixcontact.com/us/products/1619929 Device connector, front mounting - CA-07S1NA22S00 - 1619929 Schematic diagram Drilling diagram 8,25 N 6 4,75 7 1 9,5 5 2 4 3 SO 7-pos. ,1 +0 4xO3,2 0 4xM3 19,8 O2 25 2,2 O2 22 Dimensional drawing 0 +0,1 Dimensional drawing 45 45 M23x1 O28 4xO3,2 19,8 0,1 O28 19,8 0,1 Installation dimensions Phoenix Contact 2016 (c) - all rights reserved http://www.phoenixcontact.com 04/01/2016 Page 4 / 4