NTD5865NL N-Channel Power MOSFET 60 V, 46 A, 16 mW Features Low Gate Charge Fast Switching High Current Capability 100% Avalanche Tested These Devices are Pb-Free, Halogen Free and are RoHS Compliant Value Unit Drain-to-Source Voltage VDSS 60 V Gate-to-Source Voltage - Continuous VGS 20 V Gate-to-Source Voltage - Non-Repetitive (tp < 10 ms) VGS 30 V Steady State ID TC = 100C TC = 25C tp = 10 ms Operating Junction and Storage Temperature Source Current (Body Diode) Single Pulse Drain-to-Source Avalanche Energy 16 mW @ 10 V 46 A D N-Channel G TC = 25C Pulsed Drain Current ID MAX (L = 0.1 mH) Lead Temperature for Soldering Purposes (1/8 from case for 10 s) A 46 S 33 PD 71 W IDM 203 A TJ, Tstg -55 to 175 C 4 1 1 2 IS 46 A EAS 36 mJ IAS 27 A TL 260 C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 3 DPAK CASE 369AA (Surface Mount) STYLE 2 Symbol Value Unit Junction-to-Case (Drain) RqJC 2.1 C/W Junction-to-Ambient - Steady State (Note 1) RqJA 49 1. Surface-mounted on FR4 board using a 650 mm2, 2 oz. Cu pad. 2 3 IPAK CASE 369D (Straight Lead) STYLE 2 MARKING DIAGRAMS & PIN ASSIGNMENT 4 Drain 4 Drain THERMAL RESISTANCE MAXIMUM RATINGS Parameter 4 AYWW 58 65NLG Power Dissipation (RqJC) RDS(on) MAX 19 mW @ 4.5 V Symbol Continuous Drain Current (RqJC) V(BR)DSS 60 V MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Parameter http://onsemi.com AYWW 58 65NLG * * * * * 2 1 Drain 3 Gate Source 1 2 3 Gate Drain Source A = Assembly Location* Y = Year WW = Work Week 5865NL = Device Code G = Pb-Free Package * The Assembly Location code (A) is front side optional. In cases where the Assembly Location is stamped in the package, the front side assembly code may be blank. ORDERING INFORMATION See detailed ordering and shipping information on page 5 of this data sheet. (c) Semiconductor Components Industries, LLC, 2014 September, 2014 - Rev. 4 1 Publication Order Number: NTD5865NL/D NTD5865NL ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted) Symbol Test Condition Min Drain-to-Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 60 Drain-to-Source Breakdown Voltage Temperature Coefficient V(BR)DSS/TJ Parameter Typ Max Unit OFF CHARACTERISTICS V 55 TJ = 25C Zero Gate Voltage Drain Current IDSS Gate-to-Source Leakage Current IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA VGS = 0 V, VDS = 60 V mV/C 1.0 TJ = 150C mA 100 100 nA 2.0 V ON CHARACTERISTICS (Note 2) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ 1.0 5.6 mV/C Drain-to-Source on Resistance RDS(on) VGS = 10 V, ID = 20 A 13 16 mW Drain-to-Source on Resistance RDS(on) VGS = 4.5 V, ID = 20 A 16 19 mW gFS VDS = 15 V, ID = 20 A 15 S 1400 pF Forward Transconductance CHARGES, CAPACITANCES AND GATE RESISTANCES Input Capacitance Ciss VGS = 0 V, f = 1.0 MHz, VDS = 25 V Output Capacitance Coss Reverse Transfer Capacitance Crss 95 Total Gate Charge QG(TOT) 29 Threshold Gate Charge QG(TH) Gate-to-Source Charge QGS Gate-to-Drain Charge Total Gate Charge Gate Resistance 137 nC VGS = 10 V, VDS = 48 V, ID = 40 A 1.1 VGS = 4.5 V, VDS = 48 V, ID = 40 A 15 nC 1.3 W td(on) 8.4 ns tr 12.4 QGD QG(TOT) 4 8 RG SWITCHING CHARACTERISTICS (Note 3) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(off) VGS = 10 V, VDD = 48 V, ID = 40 A, RG = 2.5 W tf 26 4.4 DRAIN-SOURCE DIODE CHARACTERISTICS TJ = 25C 0.95 TJ = 125C 0.85 Forward Diode Voltage VSD Reverse Recovery Time tRR 20 Charge Time ta 13 Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 40 A VGS = 0 V, dIs/dt = 100 A/ms, IS = 40 A QRR 1.2 V ns 7 13 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Test: Pulse Width 300 ms, Duty Cycle 2%. 3. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTD5865NL TYPICAL CHARACTERISTICS 80 3.8 V 3.6 V 50 3.4 V 40 3.2 V 30 20 3V 10 2.8 V 1 2 3 4 30 TJ = 25C 20 5 TJ = 125C 1 TJ = -55C 2 3 4 5 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics ID = 40 A TJ = 25C 0.025 0.020 0.015 0.010 3 4 5 6 7 8 9 10 0.018 TJ = 25C VGS = 4.5 V 0.016 0.014 VGS = 10 V 0.012 0.010 5 10 15 20 25 30 35 VGS, GATE-TO-SOURCE VOLTAGE (V) ID, DRAIN CURRENT (A) Figure 3. On-Resistance vs. Gate Voltage Figure 4. On-Resistance vs. Drain Current 40 10000 2.2 2.0 40 VDS, DRAIN-TO-SOURCE VOLTAGE (V) 0.030 2 50 0 ID = 38 A VGS = 10 V VGS = 0 V TJ = 150C 1.8 IDSS, LEAKAGE (nA) RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) 0 60 10 2.6 V 0 RDS(on), DRAIN-TO-SOURCE RESISTANCE (NORMALIZED) ID, DRAIN CURRENT (A) 4.5 V 60 VDS 10 V 70 TJ = 25C RDS(on), DRAIN-TO-SOURCE RESISTANCE (W) ID, DRAIN CURRENT (A) 70 80 4V VGS = 10 V 1.6 1.4 1.2 1.0 1000 TJ = 125C 0.8 0.6 -50 100 -25 0 25 50 75 100 125 150 175 10 20 30 40 50 TJ, JUNCTION TEMPERATURE (C) VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 5. On-Resistance Variation with Temperature Figure 6. Drain-to-Source Leakage Current vs. Voltage http://onsemi.com 3 60 NTD5865NL TYPICAL CHARACTERISTICS 10 VGS = 0 V TJ = 25C 1600 Ciss C, CAPACITANCE (pF) 1400 VGS, GATE-TO-SOURCE VOLTAGE (V) 1800 1200 1000 800 600 400 Coss 200 Crss 0 0 10 20 30 40 50 60 8 6 4 Qgs Qgd 2 VDS = 48 V ID = 40 A TJ = 25C 0 0 5 10 15 20 25 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Qg, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate-to-Source vs. Total Charge 1000 30 40 VDD = 48 V ID = 40 A VGS = 10 V IS, SOURCE CURRENT (A) td(off) tr 10 VGS = 0 V 35 100 td(on) tf 1 10 TJ = 25C 30 25 20 15 10 5 0 0.50 0.55 0.60 0.65 0.70 0.75 0.80 0.85 0.90 0.95 1.00 1 100 RG, GATE RESISTANCE (W) VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 1000 ID, DRAIN CURRENT (A) t, TIME (ns) QT 100 VGS = 10 V SINGLE PULSE TC = 25C 100 ms 10 ms 10 ms 1 ms 10 dc 1 RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT 0.1 0.1 1 10 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 11. Maximum Rated Forward Biased Safe Operating Area http://onsemi.com 4 100 NTD5865NL TYPICAL CHARACTERISTICS RqJC(t) (C/W) EFFECTIVE TRANSIENT THERMAL RESISTANCE 10 Duty Cycle = 0.5 1 0.1 0.2 0.1 0.05 0.02 0.01 SINGLE PULSE 0.01 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 t, PULSE TIME (s) Figure 12. Thermal Response ORDERING INFORMATION Package Shipping NTD5865NL-1G IPAK (Straight Lead) (Pb-Free) 75 Units / Rail NTD5865NLT4G DPAK (Pb-Free) 2500 / Tape & Reel Order Number For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 5 NTD5865NL PACKAGE DIMENSIONS DPAK (SINGLE GUAGE) CASE 369AA ISSUE B NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.006 INCHES PER SIDE. 5. DIMENSIONS D AND E ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY. 6. DATUMS A AND B ARE DETERMINED AT DATUM PLANE H. C A A E b3 c2 B 4 L3 Z D 1 2 H DETAIL A 3 L4 b2 e c b 0.005 (0.13) M C H L2 GAUGE PLANE C L SEATING PLANE A1 L1 DETAIL A ROTATED 905 CW SOLDERING FOOTPRINT* 6.20 0.244 2.58 0.102 5.80 0.228 INCHES MIN MAX 0.086 0.094 0.000 0.005 0.025 0.035 0.030 0.045 0.180 0.215 0.018 0.024 0.018 0.024 0.235 0.245 0.250 0.265 0.090 BSC 0.370 0.410 0.055 0.070 0.108 REF 0.020 BSC 0.035 0.050 --- 0.040 0.155 --- STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN 3.00 0.118 1.60 0.063 DIM A A1 b b2 b3 c c2 D E e H L L1 L2 L3 L4 Z 6.17 0.243 SCALE 3:1 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. http://onsemi.com 6 MILLIMETERS MIN MAX 2.18 2.38 0.00 0.13 0.63 0.89 0.76 1.14 4.57 5.46 0.46 0.61 0.46 0.61 5.97 6.22 6.35 6.73 2.29 BSC 9.40 10.41 1.40 1.78 2.74 REF 0.51 BSC 0.89 1.27 --- 1.01 3.93 --- NTD5865NL PACKAGE DIMENSIONS IPAK CASE 369D ISSUE C C B V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. E R 4 Z A S 1 2 3 -T- SEATING PLANE K J F H D G DIM A B C D E F G H J K R S V Z INCHES MIN MAX 0.235 0.245 0.250 0.265 0.086 0.094 0.027 0.035 0.018 0.023 0.037 0.045 0.090 BSC 0.034 0.040 0.018 0.023 0.350 0.380 0.180 0.215 0.025 0.040 0.035 0.050 0.155 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.46 0.58 0.94 1.14 2.29 BSC 0.87 1.01 0.46 0.58 8.89 9.65 4.45 5.45 0.63 1.01 0.89 1.27 3.93 --- 3 PL 0.13 (0.005) M STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN T ON Semiconductor and the are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTD5865NL/D