GBL005 – GBL10 1 of 3 © 2002 Won-Top Electronics
GBL005 – GBL10
4.0A GLASS PASSIVATED BRIDGE RECTIFIER
Features
! Glass Passivated Die Construction
! Low Forward Voltage Drop A
! High Current Capability H
! High Reliability
! High Surge Current Capability B
! Ideal for Printed Circuit Boards E + ~ ~ -
G D
J
Mechanical Data P P P
! Case: Molded Plastic
! Terminals: Plated Leads Solderable per
MIL-STD-202, Method 208 C
! Polarity: As Marked on Body
! Weight: 2.0 grams (approx.)
! Mounting Position: Any
! Marking: Type Number K
L
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capaciti ve load, derate current by 20%.
Characteristic Symbol GBL
005 GBL
01 GBL
02 GBL
04 GBL
06 GBL
08 GBL
10 Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @TC = 50°C IO
4.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Si ngl e half sine-wave superimposed on
rated load (JEDE C Method) IFSM 150 A
Forward Voltage (per bridge) @IF = 4.0A VFM 1.0 V
Peak Reverse Current @TA = 25°C
At Rated DC Blocking Voltage @TC = 150°C IR10
1.0 µA
mA
Typical Thermal Resistance (per leg) (Note 1) RJA 22 °C/W
Typical Thermal Resistance (per leg) (Note 2) RJC 3.5 °C/W
Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C
Note: 1. Thermal resistance junction to ambient , mounted on 7.5 x 7.5 x 0.3cm thick AL plate.
2. Thermal resistance junction to case, mounted on PCB at 9.5mm lead length.
WTE
POWER SEMICONDUCTORS
GBL
Dim Min Max
A19.6 20.6
B10.7 11.2
C3.8 4.7
D15.7 17.3
E1.65 2.4
G1.65 2.0
H3.17 x 45°
J0.90 1.14
K1.14 1.52
L0.38 0.51
P4.8 5.3
All Dimensions in mm
0
1
2
3
4
5
20 40 60 80 100 120 140
I , AVERAGE OUTPUT CURRENT (A)
O
T , CASE TEMPERATURE (ºC)
Fig. 1 Forward Current Derating Curve
C
Single Phase Half Wave
60 Hz Resistive or Inductive Load
0.01
0.1
1.0
10
0 20 40 60 80 100 120 140
I,IN
S
TANTANE
O
U
S
REVER
S
E
C
URRENT
(
A
)
R
µ
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 4 Typical Reverse Characteristics, per element
T = 100°C
C
T = 25°C
A
0
50
100
150
200
250
11010
0
8.3ms Single Half Sine-Wave
JEDEC Method
I , PEAK F
O
RWARD
S
UR
G
E
C
URRENT
(
A
)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Peak Fwd Surge Current
0.01
0.1
1.0
20
00.2 0.4 0.6 0.8 1.0 1.2 1.
4
I , INSTANTANEOUS FWD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig.2TypicalForwardCharacteristics, per element
F
Tj = 25ºC
Pulse Width = 300 s
2% Duty Cycle µ
10
GBL005 – GBL10 2 of 3 © 2002 Won-Top Electronics
GBL005 – GBL10 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
GBL005 SIL Bridge 500 Units/Box
GBL01 SIL Bridge 500 Units/Box
GBL02 SIL Bridge 500 Units/Box
GBL04 SIL Bridge 500 Units/Box
GBL06 SIL Bridge 500 Units/Box
GBL08 SIL Bridge 500 Units/Box
GBL10 SIL Bridge 500 Units/Box
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wontop.com
