www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51047
1Revision: 26-Nov-07
P9
Vishay Sfernice
9 mm Multi-Ganged Potentiometer
FEATURES
•Conductive plastic element
•Ultra compact (extra miniature module size)
•Multiple assemblies (up to seven modules)
•Shaft and panel sealed option
•Center mechanical detent fully integrated in option
•Center tap option
•Custom designs available on request
RoHS
COMPLIANT
DIMENSIONS in millimeters [inches] (± 0.5 mm)
P9A
P9A: Vertical Mounting P9A Center Tap:
P9A Center Tap: Vertical Mounting
M7 x 0.75
0.9
[0.04]
11.35
[0.45]
2.5
[0.10]
L: see Shaft Table
7
[0.276]
5
[0.20]
6.4
[0.25]
2.5
[0.10]
3.6
[0.14] 2.5
[0.10]
1
[0.04]
0.45
[0.02]
R
9.5
[0.37]
3.5
[0.14]
2.5
[0.10]
2.5
[0.10]
P9
3
3.45
[0.14]
see Shaft Table
2.5
[0.10]
7.5
[0.30]
4.7
[0.19]
3.8
[0.15]
see Bushing Table
7.5
[0.30]
2.5
[0.10]
2.5
[0.10]
3 x
0.9
[0.04]
2.5
[0.10]
3.5
[0.14]
2
[0.08]
2.5
[0.10]
2.5
[0.10]
2.5
[0.10]
0.2
[0.01]
5.6
[0.22]
7.9
[0.31]
Document Number: 51047 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 26-Nov-07 2
P9
9 mm Multi-Ganged Potentiometer Vishay Sfernice
P9 - GENERAL SPECIFICATIONS
ELECTRICAL
Resistive Element Conductive Plastic
Electrical Travel 270° ± 10°
Resistance Range
linear law 1 kΩ up to 1 MΩ
non linear law 2.2 kΩ up to 500 kΩ
Power Rating at 70 °C
linear law 0.1 W
non linear law 0.05 W
multiple assemblies linear law 0.05 W per module
multiple assemblies non linear law 0.025 W per module
Temperature Coefficient (Typical) ± 500 ppm
Limiting Element Voltage 10 VDC
50 VAC
End Resistance (Typical) 3 Ω
Contact Resistance Variation linear law (typical) 2 % of nominal resistance
Independent Linearity linear law (typical) ± 5 %
Insulation Resistance 100 MΩ at 250 VDC
Dielectric Strength 300 VAC during 1 min
Attenuation (Typical) 90 dB max./0.05 dB min.
MECHANICAL
Mechanical Rotational Life 25 000 cycles min.
Mechanical Travel 300° ± 5
Operating Torque 0.2 Ncm up to 2.5 Ncm
(0.3 to 3.5 oz.inch)
End Stop Torque 50 Ncm max. (4.4 lbinch max.)
Shaft Push/Pull Force 7 DaNcm max. (15.7 lbf max.)
Weight (One Module) 6.25 g (without nut and washer)
(0.22 oz.)
ENVIRONMENTAL
Temperature Range - 55 °C up to 100 °C
Climatic Category 55/100/21
MARKING
•Type of element
•Code for tolerance
•Code for ohmic value
•Taper
•Code for date code
PACKAGING
•B2 = Box of 25 pieces
•B4 = Box of 100 pieces
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51047
3Revision: 26-Nov-07
P9
Vishay Sfernice 9 mm Multi-Ganged Potentiometer
PERFORMANCES
TESTS CONDITIONS
TYPICAL VALUE AND DRIFTS
ΔRT/RT (%) ΔR1-2/R1-2 (%) OTHER
Load Life 1000 h under nominal
power at 70 °C (90 ON/30 OFF) ± 5 % ± 10 % Contact resistance variation
< 5 % Rn
Temperature Cycle - 55 °C to + 100 °C
5 cycles ± 0.5 % - -
Moisture
21 days
at 40 ± 2 °C and 90 - 95 %
relative humidity
± 5 % - Insulation resistance
> 10 MΩ
Rotational Life
25 000 cycles at rated power
90 % of electrical travel
16 cycles per minute
Temperature: 20 °C
± 6 % ± 12 % Contact resistance variation
Shock 50 g, 11 ms
3 shocks - 3 directions ± 0.2 % ± 0.5 % -
Vibration
10 - 55 Hz
0.75 mm or 10 g
6 h
± 0.2 % - ± 0.5 %
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL
NUMBER
OF
MODULES
BUSHING LOCATING
PEG
PA N EL
SEALED
DETENT
OPTION SHAFT PIN
STYLE
RESISTANCE CODE/
TOLERANCE CODE/
TAPER
1 to 7 R = M7 x
0.75 - 7 mm
X = M7 x
0.75 - 5 mm
BUSHING
X: Bushing R: Bushing •Nut tightening torque M7 bushing 120 Ncm max.
(10.6 lbinch max.)
•Nut and washer are delivered in standard packaging
5
[0.20]
M7 x 0.75
7
[0.28]
M7 x 0.75
10
M7 x 0.75
2
0.7
R100F I R 1 0 MAP 19 X13A
Document Number: 51047 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 26-Nov-07 4
P9
9 mm Multi-Ganged Potentiometer Vishay Sfernice
Note
(1) For X bushing (16 mm)
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL
NUMBER
OF
MODULES
BUSHING LOCATING
PEG
PAN EL
SEALED
DETENT
OPTION SHAFT PIN
STYLE
RESISTANCE CODE/
TOLERANCE CODE/
TAPER
0 = without
1 = with
0 = without
P = with
0 = without
M = center
detent
see
code
below
LOCATING PEG
DETENT OPTION
•Stable position and
in Mid mechanical travel
•Rotational life:
10 000 actuations
2
[0.08] 0.8
[0.03] 0.8
[0.03]
5.6
[0.22]
Full CW Full CCW
PANEL SEALED
•Only for R bushing without locating peg.
•Front mounting surface for R bushing with panel sealed option
is: 6.2 mm ± 0.5
•The ring is delivered with nut and washer.
•The seal should be placed between panel and body.
Sealing is obtained by tightening the seal against the panel
when mounting the potentiometer.
Tightening torque 50 Ncm up to 100 Ncm
•Advised Panel Hole dimensions
Ø 6.9
[0.27]
2.35
[0.09]
4.7
[0.19]
Ø 6.9
[0.27]
SHAFT DIAMETER - FMS - STYLE
L (mm) 15 20 25 30
Style Round Slotted Flat Knurled Round Slotted Flat Round Slotted Flat Round Slotted Flat
Ø 3.5 DFR DFS DFF -DIR DIS DIF DLR DLS DLF DMR DMS DMF
Ø 6 FFR FFS FFF FGK (1) FIR FIS FIF FLR FLS FLF FMR FMS FMF
Round Slotted Flat Knurled
P1 Ø 3.5 = 2.5 mm
Ø 6 = 4.5 mm
P2 L = 15 mm → 7 mm
L > 15 mm → 12 mm
L
Ø
1
[0.039] 0.5
[0.020]
0.5
[0.020]
1.6
[0.06]
For D Diameter: Ø 4.7 mm
For F Diameter: Ø 6 mm
Ø
L
P2
P1
1
[0.039]
20°
90°
6
[0.236]
5
[0.197]
18 teeth
R100F I R 1 0 MAP 19 X13A
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51047
5Revision: 26-Nov-07
P9
Vishay Sfernice 9 mm Multi-Ganged Potentiometer
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL
NUMBER
OF
MODULES
BUSHING LOCATING
PEG
PA N EL
SEALED
DETENT
OPTION SHAFT PIN
STYLE
RESISTANCE CODE/
TOLERANCE CODE/
TAPER
see Pin Table
First digit:
Pin type
X, J, S, Z, P, L W or N
Second digit:
Pin Configuration
1, 2, 3, 4 or N
PIN STYLE - HORIZONTAL MOUNTING
PIN TYPE
XPC mount
JPC mount center tap
SSoldering style
ZCenter tap soldering style
LLong pin
PCenter tap with long pin
NN If different types of pin style in the same potentiometer
PIN CONFIGURATION
12 3
2.5 mm between gang 2.5 - 5 - 2.5 mm between gang 5 mm between gang
3.5
[0.14]
3.5
[0.14]
11.5
[0.45]
7 x 2.5
[0.098] 2.5
[0.098]
2.5
[0.098]
2.5
[0.098]
7 x 2.5
[0.098] 2.5
[0.098]
2.5
[0.098]
2.5
[0.098]
7 x 2.5
[0.098] 2.5
[0.098]
2.5
[0.098]
2.5
[0.098]
R100F I R 1 0 MAP 19 X13A
Document Number: 51047 For technical questions, contact: sfer@vishay.com www.vishay.com
Revision: 26-Nov-07 6
P9
9 mm Multi-Ganged Potentiometer Vishay Sfernice
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL
NUMBER
OF
MODULES
BUSHING LOCATING
PEG
PAN EL
SEALED
DETENT
OPTION SHAFT PIN
STYLE
RESISTANCE CODE/
TOLERANCE CODE/
TAPER
see Pin Table
First digit:
Pin type
X, J, S, Z, P, L W or N
Second digit:
Pin Configuration
1, 2, 3, 4 or N
PIN STYLE - VERTICAL MOUNTING
W1 Single gang vertical
mounting
W2 Dual gang vertical
mounting
W3 Single gang with center
tap vertical mounting
W4 Dual gang with center
tap vertical mounting
4.7
[0.19]
10.8
[0.43]
3.8
[0.15]
7.5
[0.3] 2.5
[0.098]
2.5
[0.098]
W1 - W3
7.5
[0.3] 2.5
[0.098]
2.5
[0.098]
W2 - W4
R100F I R 1 0 MAP 19 X13A
www.vishay.com For technical questions, contact: sfer@vishay.com Document Number: 51047
7Revision: 26-Nov-07
P9
Vishay Sfernice 9 mm Multi-Ganged Potentiometer
SAP ORDERING INFORMATION (Part Number 18 digits)
MODEL
NUMBER
OF
MODULES
BUSHING LOCATING
PEG
PA N EL
SEALED
DETENT
OPTION SHAFT PIN
STYLE
RESISTANCE CODE/
TOLERANCE CODE/
TAPER
Resistance code:
102 = 1 kΩ to
105 = 1 MΩ
Tolerance code:
M = 20 % - K = 10 %
Taper: A, L, W, F, S, R
or
Special code given by
VISHAY
RESISTANCE CODE
See Conversion Table for ohmic value
VARIATION LAWS
R
F S
W
L
A
90 %
50 %
20 %
10 %
Vs
%
Ve
15°
15°
Mechanical travel 300°
Electrical travel 270°
25° 50° 75°
a c
b cw
(2)
(3)
(1)
CIRCUIT DIAGRAM
TOLERANCE
Standard: M = ± 20 %
On request: K = ± 10 %
POWER RATING CHART
SPECIAL CODES GIVEN BY VISHAY
OPTIONS AVAILABLE
•Custom shaft
•Design on request
•Specific linearity
•Specific interlinearity
•Specific variation law
0.1
0.05
0010 20 30 40 50 60 70 80 90 100 110 120 130
AMBIENT TEMPERATURE (°C)
RATED POWER (W)
Linear Law
Non Linear Law
PART NUMBER DESCRIPTION (for information only)
P9A 1 R 1 0 0 FI R X1 10K 20 % A e3
MODEL MODULES BUSHING LOCATING
PEG
SEALING
OPTIONS
DETENT
OPTIONS SHAFT SHAFT LEADS VALUE TOL. TAPER SPECIAL SPECIAL
LEAD
(Pb)-
FREE
R100F I R 1 0 MAP 19 X13A
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
