7
Precision equipment for cutting. Small and comfortable.
Die-cast aluminium heads.
MICROMOT
System
220-240
VOLT
220-240
VOLT
For shape finishing, mortising, fine polishing (flat surfaces). Also for
de-burring metal, paint removal and fine finishing. Head of die-cast
aluminium, and full wave
el ec t ro nic speed control. Sanding
belt can be changed in a matter
of seconds. Complete with 2 off
80 and 2 off 180 grit belts.
on tough, woven backing. Sands metal, non-ferrous metals, wood and
plastics efficiently
No 28 581 180 grit set of 5
No 28 582 120 grit set of 5
No 28 583 80 grit set of 5
12 V 3 VA 3VA
döjfkdgj sdgbjdsgj döfjdkgfjk
dlfida dlg,dlg d dgfdl fg
12 VA
12 VA
12 VA
12 V3VA 3 VA
döjfkdgj sdgbjdsgjdöfjdkgfjk
dlfida dlg,dlg ddgfdl fg
12VA
12VA
12 VA
Super jig saw SS 230/E
Belt sander BSL 220/E
This unit offers fantastic cutting capacity with footplate adjustable up to
45° for mitre cuts. The housing head is in die-cast aluminium. The stroke
speed is variable by means of full wave electronic speed control. Ideal
for tight curves in wood (up to 12mm), PC cards and non-ferrous
metals to 3mm.
Technical data:
Stroke speed of 2,000 – 4,500/min. Mains voltage 220 – 240V, 100W
max power concumption. 13,000rpm. Stable head of diecast alu and
POLYAMIDE main housing. Length 230mm, and weight approx 700g.
Insulated to class 2. Packed in a sturdy plastic case, complete with 4
super cut blades of various pitches for wood, plastic and metal.
No 28 530
Jig saw blades. Special steel.
Pitch of 1.06mm, teeth ground & set. Usable on hard & soft woods,
plywood, fibreglass reinforced sheets as well as various plastics.
Ideal for tight curves and clean cuts. Fits SS 230/E and STS 12/E.
No 28 054 Pack of 2
Jig saw blades. HSS
Tooth pitch of 1.5mm, with teeth set & ground. Usable on metals,
aluminium and softer alloys, fibreglass, Plexiglass and insulating materials.
Fits SS 230/E and STS 12/E.
No 28 056 Pack of 2
The alternative 12V jig saw
STS 12/E is described
on page 12.
Replacement corundum sanding belts 10 x 330mm
The head rotates through 60°.
Technical data:
Belt size 10 x 330mm and usable sanding area 10 x 110mm. Belt speed
electronically controllable from 300 – 700rpm. Mains voltage 220 -
240V. 100W max power consumption. 13,000rpm. Stable head of die-
cast alu and POLYAMIDE main housing. Length 350mm, and weight
approx 650g. Run down time less than 1 second. Insulated to class 2.
No 28 536
