Bulletin PD-20785 rev. A 11/06 30CPQ050PbF 30CPQ060PbF 30 Amp SCHOTTKY RECTIFIER IF(AV) = 30Amp VR = 50 - 60V Description/ Features Major Ratings and Characteristics Characteristics Values Units IF(AV) Rectangular 30 A 50 - 60 V @ tp = 5 s sine 1020 A @ 15 Apk, TJ=125C 0.56 V - 55 to 150 C waveform VRRM IFSM VF (per leg) TJ The 30CPQ...PbF center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The proprietary barrier technology allows for reliable operation up to 150 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150 C TJ operation Center tap TO-247 package High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance Very low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Case Styles Base Common Cathode 2 1 Anode 1 3 2 Anode 2 Common Cathode TO-247AC www.irf.com 1 30CPQ050PbF, 30CPQ060PbF Bulletin PD-20785 rev. A 11/06 Voltage Ratings Part number VR 30CPQ050PbF 30CPQ060PbF 50 60 Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) Absolute Maximum Ratings Parameters 30CPQ... Units IF(AV) Max. Average Forward Current 30 A Conditions 50% duty cycle @ TC = 112 C, rectangular wave form * See Fig. 5 IFSM Max. Peak One Cycle Non-Repetitive 1020 A Surge Current (Per Leg) * See Fig. 7 265 EAS Non-Repetitive Avalanche Energy (Per Leg) 13 mJ IAR Repetitive Avalanche Current (Per Leg) 1.50 A 5s Sine or 3s Rect. pulse Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied TJ = 25 C, IAS = 1.50 Amps, L = 11.5 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 30CPQ... Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Max. Reverse Leakage Current (Per Leg) * See Fig. 2 (1) Conditions 0.60 0.80 0.56 V V V @ 15A @ 30A @ 15A 0.70 V @ 30A 0.80 mA TJ = 25 C 45 mA TJ = 125 C TJ = 25 C TJ = 125 C VR = rated VR CT Max. Junction Capacitance (Per Leg) 720 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance (Per Leg) 7.5 nH Measured lead to lead 5mm from package body 10000 V/ s dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 30CPQ... Units TJ Max. Junction Temperature Range -55 to 150 C Tstg Max. Storage Temperature Range -55 to 150 C Conditions RthJC Max. Thermal Resistance Junction to Case (Per Leg) 2.20 C/W DC operation RthJC Max. Thermal Resistance Junction to Case (Per Package) 1.10 C/W DC operation RthCS Typical Thermal Resistance, Case to Heatsink 0.24 C/W Mounting surface , smooth and greased wt Approximate Weight T Mounting Torque 6 (0.21) Min. Max. Case Style Device Marking 6 (5) 12 (10) * See Fig. 4 g (oz.) Kg-cm Non-lubricated threads (Ibf-in) TO-247AC(TO-3P) JEDEC 30CPQ050 30CPQ060 2 www.irf.com 30CPQ050PbF, 30CPQ060PbF Bulletin PD-20785 rev. A 11/06 1000 ReverseCurrent - I (mA) R 1000 125C 10 100C 1 75C .1 50C 25C .01 .001 0 10 20 30 40 50 60 ReverseVoltage- VR(V) 10 Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) 1000 T =150C J T =125C J JunctionCapacitance- C (pF) T Instantaneous ForwardCurrent - I (A) F 100 T =150C J 100 T = 25C J 1 .1 0 .2 .4 .6 .8 1 1.2 1.4 1.6 1.8 T =25C J 100 0 5 10 1520 2530 354045 50 55 6065 2 ForwardVoltage Drop- V (V) FM ReverseVoltage- VR(V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Thermal Impedance- ZthJC (C/W ) 10 1 .1 D=0.50 D=0.33 D=0.25 D=0.17 D=0.08 P DM t 1 t2 Notes: 1. Dutyfactor D= t1/ t2 .01 SinglePulse (Thermal Resistance) .001 .00001 .0001 .001 2. PeakT =P xZ +T J DM thJC C .01 .1 1 10 100 t1, Rectangular PulseDuration(Seconds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 30CPQ050PbF, 30CPQ060PbF Bulletin PD-20785 rev. A 11/06 14 RthJC (DC) =2.20C/W AveragePower Loss- (Watts) AllowableCaseTemperature- (C) 155 145 135 DC 125 115 0 2 4 6 8 10 12 14 16 18 20 22 D=0.08 12 D=0.17 D=0.25 D=0.33 10 D=0.50 8 DC 6 RMSLimit 4 2 0 0 2 4 6 8 10 12 14 16 18 20 22 AverageForwardCurrent - I (A) F(AV) AverageForwardCurrent - IF(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Fig. 6 - Forward Power Loss Characteristics (Per Leg) Non-Repetitive Surge Current - I FSM (A) 1000 At Any Rated Load Condition And With Rated VRRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) L DUT IRFP460 Rg = 25 ohm CURRENT MONITOR HIGH-SPEED SWITCH FREE-WHEEL DIODE + Vd = 25 Volt 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 30CPQ050PbF, 30CPQ060PbF Bulletin PD-20785 rev. A 11/06 Outline Table Conform to JEDEC outline TO-247AC (TO-3P) Dimensions in millimeters and (inches) Marking Information EXAMPLE: THIS IS A 30CPQ060 WITH ASSEMBLY LOT CODE 5657 ASSEMBLED ON WW 35, 2000 IN ASSEMBLY LINE "H" www.irf.com INTERNATIONAL RECTIFIER LOGO PART NUMBER 30CPQ060 P035H 56 ASSEMBLY LOT CODE 57 DATE CODE P = LEAD-FREE YEAR 0 = 2000 WEEK 35 LINE H 5 30CPQ050PbF, 30CPQ060PbF Bulletin PD-20785 rev. A 11/06 Ordering Information Table Device Code 30 C P Q 1 2 3 4 060 PbF 5 6 1 - Current Rating (30 = 30A) 2 - Circuit Configuration 3 - Package 4 - Schottky "Q" Series 5 - Voltage Code 6 - y none = Standard Production C = Common Cathode P = TO-247 050 = 50V 060 = 60V y PbF = Lead-Free Tube Standard Pack Quantity : 25 pieces Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/06 6 www.irf.com