Dialight Corporation • 1501 State Route 34 • Farmingdale, NJ 07727 • TEL: (732) 919-3119 • FAX: (732) 751-5778 • www.dialight.com
911 SERIES INDICATOR
ILLUMINATED PUSHBUTTON SWITCHES & MATCHING PANEL MOUNT INDICATORS
PART NO. CAP FIG
911-1112-525 2
CAP PART NO. COLOR FIG
911-1631 RED 3
911-1632 GREEN 3
911-1633 YELLOW 3
911-1634 BLUE 3
911-1635 WHITE 3
CYLINDRICAL LENS WITH FRESNEL RINGS*
Fig. 3
Dialight
*Not recommended for use with legends
922 SERIES MOMENTARY SWITCH
Fig. 4
PART NO. SWITCH FORMS FIG
922-1524-525 Normally Open 4
922-1526-525 Two Circuit 4
CAP PART NO. COLOR FIG
908-1631 RED 5
908-1632 GREEN 5
908-1633 YELLOW 5
908-1634 BLUE 5
908-1635 WHITE 5
CYLINDRICAL LENS WITH FRESNEL RINGS*
*Not recommended for use with legends
Fig. 5
Uses:
T-1 3/4 MIDGET
FLANGE BASE
INCANDESCENT
LAMP OR BASED
LED LAMP
Uses:
T-1 3/4 MIDGET
FLANGE BASE
INCANDESCENT
LAMP OR BASED
LED LAMP
911 SERIES CAPS
908 SERIES CAPS
Neon and incandescent lamp information on Pages 35 and 36.
Based LED lamp information on Pages 37 through 40.
Dimensions in mm [inches]
KNURLED FLANGE NUT 2.39 [.094]
X 12.93 [.509] MAX O.D., 64D.P. ST.
KNURL CLASS III
9.53 [.375] - 32 NEF - 2A THD.
INTERNAL T OOTH LOCKW ASHER
1 2 3
1
2
34
5
6
12.70
[.500]
±.13 [.005]
6.76 [.266]
41.40
[1.630]
5.08
[.200]
RECOMMEND MOUNTING HOLE 9.58 ±.05 DIA [.377 ±.002]
22.23
[.875]
8.46
[.333]
8.74
[.344]
7.94 [.313] - 32 NEF - 2A THD.
7.70
[.303]
8.74
[.344]
19.66
[.774]
7.94 [.313] - 32 NEF - 2A THD.
PROJECTION FROM BUSHING
CONTACT
PART NO. COLOR CIRCUIT FIG
913-1551-1631-525 RED N.O. 1
913-1553-1631-525 RED TWO CIRCUIT 1
913-1601-1632-525 GREEN N.O. 1
913-1603-1632-525 GREEN TWO CIRCUIT 1
913-1604-1633-525 YELLOW N.O. 1
913-1606-1633-525 YELLOW TWO CIRCUIT 1
913 SERIES LED SWITCH
36.83
[1.450]
MAX
KNURLED FLANGED NUT 2.39
[.094] X 12.93 [.509] MAX O.D. 12.70
[.500]
5.08
[.200]
7.70
[.303]
8.74
[.344]
INTERNAL T OOTH
LOCK WASHER
Fig 1
Material & Finish: Base, Black Anodized Aluminum. Cap, High Impact Plastic
MOMENTARY ACTION 0.1 AMP AT 125 VAC OR 30 VDC
9.53 [.375] - 32 NEF - 2A THD.
Dimensions in mm [inches]
RECOMMENDED MOUNTING HOLE
9.58 ±.05 [.377 ±.002]
Fig. 2
MAX.
28.58
[1.125]
6.76 ±.13
[.266 ±.005]
KNURLED FLANGE NUT 2.39 [.094]
X 12.93 [.509] MAX O.D., 64D.P. ST.
KNURL CLASS III
9.53 [.375] - 32 NEF - 2A THD.
INTERNAL T OOTH LOCKW ASHER
RECOMMEND MOUNTING HOLE 9.58 ±.05 DIA [.377 ±.002]
28
